F&T Trap Steam Traps
from RS Components, Ltd.
Stainless steel internals that can tolerate corrosive condensate. Integral automatic air venting facility. Compact and lightweight reducing installation costs. Immediate discharge with clean tight shut-off. No back-up of condensate ensures maximum plant effieciency. Robust construction to guarantee... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 464
- Operating Pressure: 65.27
- Type: Threaded
from RS Components, Ltd.
Stainless steel internals that can tolerate corrosive condensate. Integral automatic air venting facility. Compact and lightweight reducing installation costs. Immediate discharge with clean tight shut-off. No back-up of condensate ensures maximum plant effieciency. Robust construction to guarantee... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 464
- Operating Pressure: 203
- Type: Threaded
from RS Components, Ltd.
Compact design reduces installation space requirements in comparison to other types of steam trap. High resistance to superheat and water-hammer ensures long working life and reduces maintenance. Automatically discharges air and non-condensing gases to aid rapid warm-up of plant. Unaffected by back... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 189
- Type: Threaded
from RS Components, Ltd.
Compact design reduces installation space requirements in comparison to other types of steam trap. High resistance to superheat and water-hammer ensures long working life and reduces maintenance. Automatically discharges air and non-condensing gases to aid rapid warm-up of plant. Unaffected by back... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 189
- Type: Threaded
from RS Components, Ltd.
The FT range of ball float steam traps from Spirax Sarco are the most popular mechanical steam traps in the world. The new FTGS14 has been designed to offer perfect condensate drainage and air venting for process, heating and mains drainage applications. With a substantial network of experienced... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 65.27
- Type: Threaded
from RS Components, Ltd.
The FT range of ball float steam traps from Spirax Sarco are the most popular mechanical steam traps in the world. The new FTGS14 has been designed to offer perfect condensate drainage and air venting for process, heating and mains drainage applications. With a substantial network of experienced... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 212
- Type: Threaded
from RS Components, Ltd.
The FT range of ball float steam traps from Spirax Sarco are the most popular mechanical steam traps in the world. The new FTGS14 has been designed to offer perfect condensate drainage and air venting for process, heating and mains drainage applications. With a substantial network of experienced... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 212
- Type: Threaded
from RS Components, Ltd.
The FT range of ball float steam traps from Spirax Sarco are the most popular mechanical steam traps in the world. The new FTGS14 has been designed to offer perfect condensate drainage and air venting for process, heating and mains drainage applications. With a substantial network of experienced... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 212
- Type: Threaded
from RS Components, Ltd.
The FT range of ball float steam traps from Spirax Sarco are the most popular mechanical steam traps in the world. The new FTGS14 has been designed to offer perfect condensate drainage and air venting for process, heating and mains drainage applications. With a substantial network of experienced... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 212
- Type: Threaded
from RS Components, Ltd.
The FT range of ball float steam traps from Spirax Sarco are the most popular mechanical steam traps in the world. The new FTGS14 has been designed to offer perfect condensate drainage and air venting for process, heating and mains drainage applications. With a substantial network of experienced... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 145
- Type: Threaded
from RS Components, Ltd.
Body design conditions PN40. Compact design reduces installation space compared to other steam traps. High resistance to superheat and water hammer ensuring long working life and low maintenance. Automatically discharges air and incondensable gases to aid rapid plant warm up. Steel construction with... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 572
- Operating Pressure: 464
- Type: Threaded
from RS Components, Ltd.
Body design conditions PN40. Compact design reduces installation space compared to other steam traps. High resistance to superheat and water hammer ensuring long working life and low maintenance. Automatically discharges air and incondensable gases to aid rapid plant warm up. Steel construction with... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 572
- Operating Pressure: 464
- Type: Threaded
from RS Components, Ltd.
These mechanical float and thermostatic steam traps have a spheroidal graphite SG iron body and stainless steel internals. Built with an integral air vent, they are designed for all types of low, medium and high pressure steam heating and process equipment. Typical applications for these steam traps... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 388
- Operating Pressure: 65.27
- Type: Threaded
from RS Components, Ltd.
These mechanical float and thermostatic steam traps have a spheroidal graphite SG iron body and stainless steel internals. Built with an integral air vent, they are designed for all types of low, medium and high pressure steam heating and process equipment. Typical applications for these steam traps... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 388
- Operating Pressure: 65.27
- Type: Threaded
from RS Components, Ltd.
With excellent air discharge and simple and compact design these thermostatic steam traps and air eliminators are designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Connections are female screwed. Modulating discharge. Discharges... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 392
- Operating Pressure: 189
- Type: Threaded
from RS Components, Ltd.
The FLT17LC float and thermostatic (integral air vent) steam traps series are designed for all types of low and high pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 388
- Operating Pressure: 65.27
- Type: Threaded
from RS Components, Ltd.
The FLT17LC float and thermostatic (integral air vent) steam traps series are designed for all types of low and high pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 388
- Operating Pressure: 145
- Type: Threaded
from RS Components, Ltd.
The FLT17LC float and thermostatic (integral air vent) steam traps series are designed for all types of low and high pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers, jacketed vessels and all the applications where continuous drainage... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 388
- Operating Pressure: 145
- Type: Threaded
from RS Components, Ltd.
The TSS 6 thermostatic steam trap is designed for use in reactors, sterilisers and distribution lines in clean and pure steam systems. Trap Type = Thermostatic. Orientation = Vertical. Maximum Working Pressure = 6 bar. Maximum Temperature = +165 °C. Body Material = Stainless Steel. Connection... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 329
- Operating Pressure: 87.02
- Size: 0.50
from RS Components, Ltd.
The TSS 6 thermostatic steam trap is designed for use in reactors, sterilisers and distribution lines in clean and pure steam systems. Trap Type = Thermostatic. Orientation = Vertical. Maximum Working Pressure = 6 bar. Maximum Temperature = +165 °C. Body Material = Stainless Steel. Connection... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 329
- Operating Pressure: 87.02
- Size: 0.75
from RS Components, Ltd.
The TSS 6 thermostatic steam trap is designed for use in reactors, sterilisers and distribution lines in clean and pure steam systems. Trap Type = Thermostatic. Orientation = Vertical. Maximum Working Pressure = 6 bar. Maximum Temperature = +165 °C. Body Material = Stainless Steel. Connection... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 329
- Operating Pressure: 87.02
- Size: 1.00
from RS Components, Ltd.
Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Trap Type = Thermostatic. Orientation = Horizontal, Vertical. Maximum Working Pressure = 10 bar. Body Material = SG Iron. Gasket Material = Stainless Steel. Connection Gender = Female [See More]
- Steam Trap Type: FloatThermostatic
- Material: SG Iron
- Operating Pressure: 145
from RS Components, Ltd.
Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Trap Type = Thermostatic. Orientation = Horizontal, Vertical. Maximum Working Pressure = 10 bar. Body Material = SG Iron. Gasket Material = Stainless Steel. Connection Gender = Female [See More]
- Steam Trap Type: FloatThermostatic
- Material: SG Iron
- Operating Pressure: 145
from RS Components, Ltd.
Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Trap Type = Thermostatic. Orientation = Horizontal, Vertical. Maximum Working Pressure = 10 bar. Body Material = SG Iron. Gasket Material = Stainless Steel. Connection Gender = Female [See More]
- Steam Trap Type: FloatThermostatic
- Material: SG Iron
- Operating Pressure: 145
from RS Components, Ltd.
Trap sets containing a globe valve, Y strainer, non-return valve and a float and thermostatic steam trap. Trap Type = Thermostatic. Orientation = Horizontal, Vertical. Maximum Working Pressure = 14 bar. Body Material = SG Iron. Gasket Material = Stainless Steel. Connection Gender = Female [See More]
- Steam Trap Type: FloatThermostatic
- Material: SG Iron
- Operating Pressure: 203
from Watts
Series WFT Float and Thermostatic Steam Traps are used in steam main drips and process applications to provide continuous air venting and condensate removal. They feature an iron body H-pattern design (3/4 in through 1-1/4 in) or C-pattern design (1-1/4 in through 2 in), stainless steel valve head,... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 353
- Operating Pressure: 125
- Type: Threaded; Universal 4 Port Design
from Watson McDaniel Company
bull; Trap module can be easily removed and replaced in. minutes without having to disconnect any piping. • Hardened stainless steel valves and seat. • Freeze resistant. • Connectors available with integral strainers and blowdown valves. • 360 º swivel design for convenient... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 397
- Operating Pressure: 65
- Capacity: 1110
from Spirax-Sarco
The FTS14 is an austenitic stainless steel ball float steam trap with an integral automatic air vent. It provides efficient condensate drainage and prompt air removal to ensure process equipment operates to its maximum potential. As standard the FTS14 has horizontal connections with flow from right... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 572
- Operating Pressure: 363
- Type: Socketweld (optional feature); Flanged (optional feature); Threaded (optional feature)
from Armstrong International
Armstrong A & AI Series F &T traps are for industrial service from 0 to 175 psig (12 bar) and feature a balanced pressure phosphor-bronze type bellows caged in stainless steel. Armstrong A & AI Series F &T traps are designed for service on heat exchange equipment where there is a... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 377
- Operating Pressure: 175
- Capacity: 8600
from Watts
Series G, MG Float and Thermostatic Steam Traps are used in steam main drip and process applications to remove condensate, air, and non-condensable gases from steam systems. They feature an iron body with a straight-through design, stainless steel valve head & seat, phosphor bronze diaphragm,... [See More]
- Steam Trap Type: FloatThermostatic
- Type: Threaded
- Operating Pressure: 50
- Size: 2.00
from Spirax-Sarco
The FTGS14 ball float steam trap has an austenitic stainless steel body, stainless steel working internals and integral automatic air venting facility. The SG iron cover is electroless nickel-plated offering increased resistance to erosion. This trap is supplied with horizontal flanged connections... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 482
- Operating Pressure: 232
- Type: Flanged
from Armstrong International
Armstrong AIC Series F &T traps are designed for industrial service from 0 to 465 psig (32 bar). They featrue all the benefits of Armstrong F &T traps, such as operation against back pressure, continuous drainage, high-capcity venting of air and CO2, long life and dependable service and... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 572
- Operating Pressure: 465
- Capacity: 60075
from Spirax-Sarco
The FTC32 is a carbon steel ball float steam trap with integral automatic thermostatic air vent. It is ideal for all process drainage applications as condensate is always removed efficiently and quickly over a wide range of fluctuating pressure and load conditions. Standard connections are... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 752
- Operating Pressure: 725
- Type: Socketweld (optional feature); Flanged (optional feature); Threaded (optional feature)
from Armstrong International
Armstrong B and BI Series F &T traps combine high standards of performance and long life with economy. They are ideal for heating service where continuous drainage with high air-venting capacity is required. Due to the wide use of vacuum returns in systems of this type, the thermostatic air vent... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 353
- Operating Pressure: 30
- Capacity: 8900
from Spirax-Sarco
The FT44 is a carbon steel bodied ball float steam trap having stainless steel working internals and automatic air venting facility. The body and cover castings are produced by a T ÜV approved foundry. The trap is supplied with integrally flanged connections and can be maintained without... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 572
- Operating Pressure: 580
- Type: Flanged
from Armstrong International
Steam Traps. Pay less money for energy-and more attention to the environment. It's pretty obvious, really. An efficient steam trap wastes less energy, which means you burn less fuel and reduce emissions. The results are energy savings and a cleaner, healthier environment. By helping companies manage... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 650
- Operating Pressure: 250
- Capacity: 1050
from Spirax-Sarco
The FT54 is a carbon steel ball float steam trap with internal thermostatic air vent for the prompt removal of large condensate loads from steam systems. The trap is supplied with integrally flanged connections (for horizontal or vertical installation) and can be maintained without disturbing the... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 752
- Operating Pressure: 580
- Type: Flanged
from Armstrong International
The FT 4000 allows you to install a float and thermostatic steam trap in any piping configuration, with little or no repiping. You get the reliability of the float and thermostatic operating principle, plus the benefits of all-stainless steel construction: A sealed, tamperproof package. A compact,... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 600
- Operating Pressure: 75
- Capacity: 1080
from Spirax-Sarco
The FT43 is a cast iron bodied ball float steam trap having stainless steel working internals and automatic air venting facility. The trap is supplied with integrally flanged connections and can be maintained without disturbing the pipework. Vertical flanged connections, designated FT44V, are... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 428
- Operating Pressure: 232
- Type: Flanged
from Armstrong International
Steam Traps. Pay less money for energy-and more attention to the environment. It's pretty obvious, really. An efficient steam trap wastes less energy, which means you burn less fuel and reduce emissions. The results are energy savings and a cleaner, healthier environment. By helping companies manage... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 650
- Operating Pressure: 465
- Capacity: 60000
from Spirax-Sarco
The FT53 is a cast iron ball float steam trap with internal thermostatic air vent for the prompt removal of large condensate loads from steam systems. The trap is supplied with integrally flanged connections (for horizontal or vertical installation) and can be maintained without disturbing the... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 572
- Operating Pressure: 232
- Type: Flanged
from Armstrong International
Steam Traps. Pay less money for energy-and more attention to the environment. It's pretty obvious, really. An efficient steam trap wastes less energy, which means you burn less fuel and reduce emissions. The results are energy savings and a cleaner, healthier environment. By helping companies manage... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 422
- Operating Pressure: 15
- Capacity: 142000
from Spirax-Sarco
As standard, the FTC80 ball float steam trap is supplied with a right to left (R-L) flow configuration having horizontal connections and has provision for adding an air venting option; Please note that the unit is supplied with a ¾ " socket weld connection in the cover with a plug screwed... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 797
- Operating Pressure: 1450
- Type: Socketweld (optional feature); Flanged (optional feature)
from Armstrong International
Steam Traps. Pay less money for energy-and more attention to the environment. It's pretty obvious, really. An efficient steam trap wastes less energy, which means you burn less fuel and reduce emissions. The results are energy savings and a cleaner, healthier environment. By helping companies manage... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 422
- Operating Pressure: 30
- Capacity: 208000
from Spirax-Sarco
The UFT32 is an austenitic stainless steel maintenance free sealed ball float steam trap with an integral automatic air venting facility. It is designed for differential steam pressures up to 32 bar. When installed with a suitable pipeline connector the UFT32 can easily and simply be removed without... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 752
- Operating Pressure: 725
- Type: Socketweld (optional feature); Flanged (optional feature); Threaded (optional feature)
from Armstrong International
The simple, yet rugged, cast steel construction of the LS & MS Series Ultra-Capacity F &T steam traps offer long, trouble-free service. All floats, valves and seats, and lever mechanisms are constructed of stainless steel. The integral thermostatic air vent is a balanced-pressure... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 650
- Operating Pressure: 450
- Capacity: 280000
from Spirax-Sarco
The FT14 and FT14HC are iron bodied ball float steam traps having stainless steel working internals and integral automatic air venting facility. These traps are supplied with horizontal screwed connections only and can be maintained without disturbing the pipework. The flow direction is as indicated... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 572
- Operating Pressure: 363
- Type: Threaded
from Armstrong International
The Armstrong Double Duty ® series steam trap/pump combinations are a low maintenance, low-profile solution for draining heat exchangers in various applications. The Double Duty ® series offers you the versatility of combining a pump within a steam trap to aide in condensate drainage from a... [See More]
- Steam Trap Type: FloatThermostatic; Pumping
- Operating Temperature: 320
- Operating Pressure: 72
- Capacity: 4400
from Spirax-Sarco
The FT47 is an SG iron ball float steam trap with integral automatic air venting facility. It is available with horizontal flanged connections as well as vertical flanged connections, designated FT47V. As an option in the horizontal version up to 21 bar g, a manually adjustable needle valve can be... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 572
- Operating Pressure: 580
- Type: Flanged
from Armstrong International
The Armstrong Double Duty ® series steam trap/pump combinations are a low maintenance, low-profile solution for draining heat exchangers in various applications. The Double Duty ® series offers you the versatility of combining a pump within a steam trap to aide in condensate drainage from a... [See More]
- Steam Trap Type: FloatThermostatic; Pumping
- Operating Temperature: 400
- Operating Pressure: 200
- Capacity: 22500
from Spirax-Sarco
The FT57 is an SG iron ball float steam trap with internal thermostatic air vent for the prompt removal of large condensate loads from steam systems. The trap is supplied with integrally flanged connections (for horizontal or vertical installation) and can be maintained without disturbing the... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 662
- Operating Pressure: 580
- Type: Flanged
from Spirax-Sarco
The FT46 is an austenitic stainless steel bodied ball float steam trap having stainless steel working internals and automatic air venting facility. The body and cover castings are produced by a T ÜV approved foundry. The trap is supplied with integrally flanged connections and can be maintained... [See More]
- Steam Trap Type: FloatThermostatic
- Operating Temperature: 752
- Operating Pressure: 870
- Type: Flanged