Encapsulating / Potting Rubber Adhesives and Sealants
from Ellsworth Adhesives
Dow SYLGARD ™ 186 Silicone Elastomer Clear is a two component, room temperature and heat curing, encapsulant that is used as a protective coating for electrical applications such as power supplies, transformers, sensors, amplifiers, and connectors. It provides flexibility, high tear strength,... [See More]
- Features: Encapsulant, Potting Compound
- Cure / Technology: Two Component
- Chemical System: Silicone
- Industry: Electric Power
from Hernon Manufacturing, Inc.
Tuffbond ® 316 is a two component, room temperature cure system. By changing the ratio of resin and hardener, the cured adhesive can change from a tough and flexible to a hard and rigid system. Tuffbond ® 316 is recommended for bonding metal, glass, wood, concrete, and rubber, and can be... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Master Bond Polymer System UV19 is a newly developed UV curable, low viscosity optically clear compound specifically designed for high performance laminating, sealing, bonding and coating. This remarkable acrylic based polymer composition can effectively replace conventional heat and/or solvent... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Laminaes; Leveling Filling; Non-corrosive; Sealant; Thermal Insulation
- Type / Form: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from Ellsworth Adhesives
Dow SYLGARD ™ 186 Silicone Elastomer Clear is a two component, room temperature and heat curing, encapsulant that is used as a protective coating for electrical applications such as power supplies, transformers, sensors, amplifiers, and connectors. It provides flexibility, high tear strength,... [See More]
- Features: Encapsulant, Potting Compound
- Cure / Technology: Two Component
- Chemical System: Silicone
- Industry: Electric Power
from Hernon Manufacturing, Inc.
Tuffbond ® 317 is a two component, room temperature cure system. By changing the ratio of resin and hardener, the cured adhesive can change from a tough and flexible to a hard and rigid system. The resin offers a unique combination of hardness and flexibility with high chemical and solvent... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Master Bond Polymer System UV15-7SP4 is a new one component, optically clear, toughened UV and/or curable polymer system with extended service capability of -80 °F to +250 °F. It is 100% reactive, does not contain any solvents or other volatiles and does not embrittle even upon exposure to... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Laminaes; Leveling Filling; Non-corrosive; Sealant; Thermal Insulation
- Type / Form: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from Ellsworth Adhesives
Dow SYLGARD ™ 186 Silicone Elastomer Clear is a two component, room temperature and heat curing, encapsulant that is used as a protective coating for electrical applications such as power supplies, transformers, sensors, amplifiers, and connectors. It provides flexibility, high tear strength,... [See More]
- Features: Encapsulant, Potting Compound
- Cure / Technology: Two Component
- Chemical System: Silicone
- Industry: Electric Power
from Hernon Manufacturing, Inc.
Tuffbond ® 65891 is a two-component, room temperature cure system. Tuffbond ® 65891 is recommended for bonding metal, glass, wood, concrete, and rubber, and can be used for potting and encapsulation of electrical and electronic components. [See More]
- Features: Encapsulant, Potting Compound
- Industry: Aerospace; Automotive; Electronics; Electric Power; Military; OEM or Industrial
- Cure / Technology: Two Component ; Room Temperature Vulcanizing or Curing
from Master Bond, Inc.
Master Bond UV15FL is a new one component, high strength, low viscosity, flexible UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed... [See More]
- Features: High Dielectric; Encapsulant, Potting Compound; Laminaes; Leveling Filling; Non-corrosive; Sealant; Thermal Insulation
- Type / Form: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured; Single Component
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer; Dissimilar Substrates
from Wacker Chemical Corp.
WACKER ’s silicone adhesives and sealants are based on many years of experience, innovative research and comprehensive technological expertise. In a wide variety of industries, especially in lighting technology, flowable or non-sag silicone products offer decisive advantages in performance and... [See More]
- Features: Encapsulant, Potting Compound; Thermally Conductive
- Industry: Electronics
- Chemical System: Silicone
from Techsil Limited
LOCTITE ® 595 is for superior bonding and sealing properties to most surfaces (although not recommended for use on concrete). This product resists aging weathering and thermal cycling without having adverse reactions such as hardening, shrinking or cracking. The thixotropic nature of LOCTITE... [See More]
- Features: Encapsulant, Potting Compound
- Chemical System: Silicone
from GS Polymers, Inc.
Two part, 1:2, 1-2 hours working time, water resistant, excellent adhesion [See More]
- Features: Encapsulant, Potting Compound
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Filled
- Substrate Compatibility: Ceramic, Glass; Concrete, Masonry (optional feature); Composites (optional feature); Metal; Paper or Paperboard; Porous Surfaces; Dissimilar Substrates
from Hapco, Inc.
Filter-bond ™ is a series of casting and potting compounds ideally suited for potting, sealing, and bonding filtration and ultrafiltration products. The Filter-bond ™ E-Series is manufactured to ultra-high quality standards and has been used by customers to pass FDA approval. Filter-bond... [See More]
- Features: Flexible; Encapsulant, Potting Compound; Sealant
- Type / Form: Liquid
- Cure / Technology: Two Component
- Industry: Sanitary
from Epoxies Etc...
20-3237 is a new 1:1 ratio, low viscosity Epoxy Rubber System designed for potting delicate electronic components requiring inspection. 20-3237 is an ideal candidate for applications requiring testing and/or repairs of embedded components. Cured material can be cut away to replace components and... [See More]
- Features: Flexible; Encapsulant, Potting Compound
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Unfilled
- Type / Form: Liquid
from Wacker Chemical Corp.
WACKER SilGel ® 612 A/B is a pourable, additioncuring, RTV-2 silicone rubber that vulcanizes at room temperature to a very soft silicone gel. Special features. two-part, 1 : 1 mixing ratio. low viscosity. rapid heat cure. very low hardness (silicone gel). crystal clear. pronounced inherent tack. [See More]
- Features: Flexible; Encapsulant, Potting Compound; Flame Retardant
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Chemical System: Silicone
- Type / Form: Liquid
from Techsil Limited
Momentive RTV11 is a general purpose silicone rubber potting compound suitable for a range of applications. It is widely used for the potting and encapsulation of electrical coils and connectors, alongside making cast-in-place gaskets and moulds. RTV11 is supplied ready-to-use with DBT as the... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Sanitary
- Chemical System: Silicone
- Use Temperature: -54 to 204
from Epoxies Etc...
UV 60-7016 is a high performance Ultraviolet Curable Adhesive, Sealant, and Potting Compound. This new one component urethane acrylate system was specifically designed for the difficult bonding of glass to metal. UV 60-7016 has outstanding thermal shock and impact resistance, and is an excellent... [See More]
- Features: Flexible; Encapsulant, Potting Compound; Sealant
- Cure / Technology: UV or Radiation Cured; Single Component
- Composition: Unfilled
- Type / Form: Liquid
from Techsil Limited
Momentive RTV11 is a general purpose silicone rubber potting compound suitable for a range of applications. It is widely used for the potting and encapsulation of electrical coils and connectors, alongside making cast-in-place gaskets and moulds. RTV11 is supplied ready-to-use with DBT as the... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Sanitary
- Chemical System: Silicone
- Use Temperature: -54 to 204
from Epoxies Etc...
50-2366 FR is a new thermally conductive polyurethane potting compound. This flexible system is designed for low stress on sensitive components during and after cure. 50-2366 FR polyurethane resin system is formulated for applications requiring low exotherm, low shrinkage, and excellent electrical... [See More]
- Features: Encapsulant, Potting Compound; Flame Retardant; Thermally Conductive; UL Rating
- Cure / Technology: Thermoset; Two Component ; Room Temperature Vulcanizing or Curing
- Composition: Filled
- Type / Form: Liquid
from Techsil Limited
Momentive RTV11 is a general purpose silicone rubber potting compound suitable for a range of applications. It is widely used for the potting and encapsulation of electrical coils and connectors, alongside making cast-in-place gaskets and moulds. RTV11 is supplied ready-to-use with DBT as the... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Sanitary
- Chemical System: Silicone
- Use Temperature: -54 to 204
from Techsil Limited
RTV12 A is a clear, two component, low viscosity potting compound that cures at room temperature to a soft pliable rubber. It will cure in deep sections without additional heating or moisture. RTV12 A is the base compound and requires a curing agent to be mixed with. For a clear product which allows... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Electronics
- Chemical System: Silicone
from Techsil Limited
RTV12 A is a clear, two component, low viscosity potting compound that cures at room temperature to a soft pliable rubber. It will cure in deep section without additional heating or moisture. RTV12 A is the base compound and requires a curing agent to be mixed with. For a clear product which allows... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Electronics
- Chemical System: Silicone
from Techsil Limited
Momentive RTV31 is a high temperature silicone rubber potting compound suitable for a range of applications. It is widely used for the potting and encapsulation of electric motors and transformers, casting moulds for low-melting point metals and for the fabrication of rubber parts. Also suitable for... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Electronics
- Chemical System: Silicone
- Use Temperature: -54 to 260
from Techsil Limited
Momentive RTV31 is a high temperature silicone rubber potting compound suitable for a range of applications. It is widely used for the potting and encapsulation of electric motors and transformers, casting moulds for low-melting point metals and for the fabrication of rubber parts. Also suitable for... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Electronics
- Chemical System: Silicone
- Use Temperature: -54 to 260
from Techsil Limited
Momentive RTV31 is a high temperature silicone rubber potting compound suitable for a range of applications. It is widely used for the potting and encapsulation of electric motors and transformers, casting moulds for low-melting point metals and for the fabrication of rubber parts. Also suitable for... [See More]
- Features: Encapsulant, Potting Compound
- Use Temperature: -54 to 260
- Chemical System: Silicone
from Techsil Limited
RTV560 is a silicone rubber compound from Momentive Performance Materials. It offers excellent release properties and also good adhesion capabilities with the use of a primer. This grade with cure at room temperature and retains its elastomeric properties across a wide temperature range. RTV560 is... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Electronics
- Chemical System: Silicone
- Use Temperature: -115 to 260
from Techsil Limited
RTV560 is a silicone rubber compound from Momentive Performance Materials. It offers excellent release properties and also good adhesion capabilities with the use of a primer. This grade with cure at room temperature and retains its elastomeric properties across a wide temperature range. RTV560 is... [See More]
- Features: Encapsulant, Potting Compound
- Industry: Electronics
- Chemical System: Silicone
- Use Temperature: -115 to 260
from Techsil Limited
Momentive RTV566 is a two-part silicone rubber compound processed and tested for applications where low outgassing is required. Supplied as a kit with RTV566 A (base compound) and RTV566 B (curing agent). Product Benefits. Room temperature cure. Excellent release properties. Provides low outgassing... [See More]
- Features: Encapsulant, Potting Compound
- Use Temperature: -115 to 260
- Chemical System: Silicone
from Techsil Limited
DETAILS. RTV577 is a low temperature silicone rubber compound from Momentive Performance Materials. It offers excellent release properties and also good adhesion capabilities with the use of a primer. This grade with cure at room temperature and retains its elastomeric properties across a wide... [See More]
- Features: Encapsulant, Potting Compound
- Use Temperature: -115 to 204
- Chemical System: Silicone