Dynamic Braking Resistor Resistors
from Richardson RFPD
The M3500DB Series enhances system performance and safety by providing resistive braking control for emergency stop applications if regenerative braking does not perform. [See More]
- Category / Application: Braking Resistor
from RS Components, Ltd.
Dynamic Braking Resistor 3KW 22R [See More]
- Category / Application: Braking Resistor
- Mounting / Packaging: Screw Terminals; Metal Housed
- Technology / Construction: Ceramic Composition; Ceramic, Wire Wound
- Resistance Range: 22
from Isabellenhutte USA
Small aluminum housed wire wound or thick film resistor. For use in test jigs, snubber circuits and power supplies. Features. Wattage rating 5 W to 50 W. Resistance range 22 m Ω to 2M Ω. Chassis mount. Available in Inductive or Non-Inductive configurations [See More]
- Category / Application: Automotive; Braking Resistor; Industrial; Power Applications
- Technology / Construction: Wirewound
- Configuration: Single Resistor
- Mounting / Packaging: Tab Terminals
from RS Components, Ltd.
Dynamic Braking Resistor 3KW 33R [See More]
- Category / Application: Braking Resistor
- Mounting / Packaging: Screw Terminals; Metal Housed
- Technology / Construction: Ceramic Composition; Ceramic, Wire Wound
- Resistance Range: 33
from Isabellenhutte USA
High Power, Metal Clad, Wire-Wound Resistor Assemblies. Designed for use in high power inverters and load banks. Features. Wattage ratings 640 W to 3100 W. Resistance range 0.1 Ω to 1600 Ω. Powder coated steel case for durability. Designed for enhanced operator safety. [See More]
- Category / Application: Automotive; Braking Resistor; Industrial; Power Applications
- Technology / Construction: Wirewound
- Configuration: Single Resistor
- Mounting / Packaging: Tab Terminals
from RS Components, Ltd.
Dynamic Braking Resistor 3KW 52R [See More]
- Category / Application: Braking Resistor
- Mounting / Packaging: Screw Terminals; Metal Housed
- Technology / Construction: Ceramic Composition; Ceramic, Wire Wound
- Resistance Range: 52
from Isabellenhutte USA
Precision metal clad resistor designed with four terminals to isolate voltage and current. Applications include test jigs for battery manufacturing current detection in precise power sources, industrial power conversion circuits, HEV's and fuel cells. Features. Current rating up to 500A. Resistance... [See More]
- Category / Application: Automotive; Braking Resistor; Industrial; Power Applications
- Technology / Construction: Wirewound
- Configuration: Single Resistor
- Mounting / Packaging: Tab Terminals
from RS Components, Ltd.
Dynamic Braking Resistor 3KW 26R [See More]
- Category / Application: Braking Resistor
- Mounting / Packaging: Screw Terminals; Metal Housed
- Technology / Construction: Ceramic Composition; Ceramic, Wire Wound
- Resistance Range: 26
from Isabellenhutte USA
Space saving, economical resistors for use in snubber circuits and industrial equipment. Features. Power ratings of 30W and 50W. Resistance 1 Ω to 500 Ω. Low profile design [See More]
- Category / Application: Automotive; Braking Resistor; Industrial; Power Applications
- Technology / Construction: Wirewound
- Configuration: Single Resistor
- Mounting / Packaging: Tab Terminals
from RS Components, Ltd.
Dynamic Braking Resistor 4.5KW 18R [See More]
- Category / Application: Braking Resistor
- Mounting / Packaging: Screw Terminals; Metal Housed
- Technology / Construction: Ceramic Composition; Ceramic, Wire Wound
- Resistance Range: 18
from Isabellenhutte USA
UL approved high power, wire wound, metal clad resistors. For use in VFD's, Inverters, Load Banks. Features. UL Approved. Wattage Range 50W to 500W. Resistance range 1 Ω to 3500 Ω. Low inductance. Low profile design [See More]
- Category / Application: Automotive; Braking Resistor; Industrial; Power Applications
- Technology / Construction: Wirewound
- Configuration: Single Resistor
- Mounting / Packaging: Tab Terminals
from RS Components, Ltd.
Dynamic Braking Resistor 4.5KW 26R [See More]
- Category / Application: Braking Resistor
- Mounting / Packaging: Screw Terminals; Metal Housed
- Technology / Construction: Ceramic Composition; Ceramic, Wire Wound
- Resistance Range: 26
from Isabellenhutte USA
UL approved high power, wire wound, metal clad resistors. For use in VFD's, Inverters, Load Banks. Features. UL Approved. Wattage Range 60W to 500W. Resistance range 0.1 Ω to 6.8K Ω. Available in Inductive or Non-Inductive configurations. Terminals or leads. Over temperature protection... [See More]
- Category / Application: Automotive; Braking Resistor; Industrial; Power Applications
- Technology / Construction: Wirewound
- Configuration: Single Resistor
- Mounting / Packaging: Tab Terminals
from RS Components, Ltd.
Dynamic Braking Resistor 6KW 15R [See More]
- Category / Application: Braking Resistor
- Mounting / Packaging: Screw Terminals; Metal Housed
- Technology / Construction: Ceramic Composition; Ceramic, Wire Wound
- Resistance Range: 15
from Isabellenhutte USA
UL approved high power, wire wound, metal clad resistors. For use in VFD's, Inverters, Load Banks. Features. UL Approved. Resistance range 0.3 to 144 ohms. Terminals or leads. Fully customizable. Wattage Range 1600 to 2800 Watts. Over temperature protection available. Available in Inductive or... [See More]
- Category / Application: Automotive; Braking Resistor; Industrial; Power Applications
- Technology / Construction: Wirewound
- Configuration: Single Resistor
- Mounting / Packaging: Tab Terminals
from Ohmite Manufacturing Co.
High Current Oval Edgewound. The choice when conditions demand top-notch performance, these resistors are commonly used for dynamic braking on Transit applications. Choose from five sizes with up to thirty-one current ratings. The units listed below are direct replacements for General Electric... [See More]
- Category / Application: Braking Resistor; High Current Resistor
- Technology / Construction: Edgewound Resistor
- Configuration: Single Resistor
- Resistance Range: 0.0426 to 6.13
from Vincotech GmbH
There is a new standard brake resistor resistor S30814-Q992-A in thick film on ceramic technology. It is used as a component that can handle high energy pulse. Engineered for mounting on a heat sink with pre-applied thermal interface material ( “Phase Change Material ”), the Q992-A... [See More]
- Category / Application: Braking Resistor; Industrial; Motor drive; Application with high pulse energy
- Technology / Construction: Thick Film (Chip)
- Configuration: Single Resistor
- Mounting / Packaging: Easy spring fixing heatsink mountable
from Ohmite Manufacturing Co.
The choice when conditions demand top-notch performance, these resistor load banks are commonly used for dynamic braking on Transit applications or where high current handling and wattage are required. Ohmite's unique Oval Edgewound design allows for more wattage in smaller a package. Choose from... [See More]
- Category / Application: Braking Resistor; Transit Applications
- Technology / Construction: Edgewound Resistor; Grid Resistor; MetalAlloy; Stainless Steel Resistance Alloy
- Configuration: Grid Array
- Resistance Range: 0.0990 to 2.40E7
from Vincotech GmbH
The standard inrush resistor S30814-Q791-A in thick film technology is used as an inrush current limiter. The resistor is designed for charging a capacitor of 235 µF (2x470 µF serial) with up to 750 V, as used in 400 V~, 3-phase rectifier circuits. Product Features. R = 100 Ω... [See More]
- Category / Application: Braking Resistor; Industrial; Motor drive; SMPS; Welding
- Technology / Construction: Thick Film (Chip)
- Configuration: Single Resistor
- Mounting / Packaging: ThroughHole
from Ohmite Manufacturing Co.
These high current round edgewound resistors handle a variety of applications including dynamic braking, load banks, motor starting, and plugging. They are available in a variety of ohm and current ratings common to transit use. A sturdy welded steel frame supports the refractory insulators. The... [See More]
- Category / Application: Braking Resistor; Motor Starting Resistor; Load Banks
- Technology / Construction: Edgewound Resistor
- Configuration: Single Resistor
- Resistance Range: 0.1180 to 0.2850
from Ohmite Manufacturing Co.
The Ohmite JR series high current jumpers are rated up to 100 amps and provides a max resistance range of 0.5m to 0.2m ohms. This minimizes effects on the designed circuit. Five industry sizes are available. The JR series also provides great insulation resistance over 100M ohms. [See More]
- Category / Application: Braking Resistor; High Current Resistor; Power Applications
- Technology / Construction: MetalAlloy
- Configuration: Single Resistor
- Mounting / Packaging: Surface Mount Technology (SMT / SMD); 0402; 0603; 0805; 1206; 2512
from Ohmite Manufacturing Co.
The Ohmite SGM series is constructed using stamped grid technology in a modular format. The design consists of several resistive plates, fitted on steel rods, separated by ceramic rings. This design offers size and weight advantages over regular wirewound grid assemblies. The enclosure is NEMA 3R... [See More]
- Category / Application: Braking Resistor; Brake Choppers or Crowbars
- Technology / Construction: Grid Resistor
- Configuration: Single Resistor
- Resistance Range: 31 to 424