Rubber Safety and Reflective Tapes
from Ellsworth Adhesives
3M 5700 Safety Stripe Tape Black and White is made of a vinyl backing and rubber adhesive. It is used to mark hazard, safety, and traffic areas. It is durable and resistant to most solvents. 2 in x 36 yd Roll. [See More]
- Adhesive: Rubber
- Carrier / Backing: Polyvinyl Chloride
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Temperature Resistance: 4 to 77
from RS Components, Ltd.
SAV left luminous tape,40mmx10m [See More]
- Adhesive: Rubber
- Width: 1.57
- Type: Reflective; Industrial Tape
- Carrier / Backing: Plastic / Polymer
from Ellsworth Adhesives
3M 5702 Safety Stripe Tape Black and Yellow is made of a vinyl backing and rubber adhesive. It is used to mark hazard, safety, and traffic areas. It is durable and resistant to most solvents. 2 in x 36 yd Roll. [See More]
- Adhesive: Rubber
- Carrier / Backing: Polyvinyl Chloride
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Temperature Resistance: 4 to 77
from RS Components, Ltd.
SAV right luminous tape,40mmx10m [See More]
- Adhesive: Rubber
- Width: 1.57
- Type: Reflective; Industrial Tape
- Carrier / Backing: Plastic / Polymer
from Ellsworth Adhesives
3M Hazard Marking Vinyl Tape 766 Black and Yellow, is a vinyl backed, rubber adhesive that is used for safety marking applications. 2 in x 36 yd Roll. [See More]
- Adhesive: Rubber
- Carrier / Backing: Polyvinyl Chloride
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Color: Black and Yellow
from RS Components, Ltd.
SAV striped luminous tape,40mmx10m [See More]
- Adhesive: Rubber
- Width: 1.57
- Type: Reflective; Industrial Tape
- Carrier / Backing: Plastic / Polymer
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Vinyl Tape 471 Blue, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, dead stretch properties to provide straighter lines, clean removal, good solvent resistance. 3M ™ Vinyl Tape 471, ideal for masking,... [See More]
- Adhesive: Single; Rubber
- Width: 1
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Thickness: 0.0052
from NADCO Tapes & Labels, Inc.
Grit Safety Anti-Slip Tape possesses a mineral-coated plastic film. It contains one pressure sensitive adhesive side, and is protected by a removable liner. Applications: This non-skid tape is recommended for surface application temperatures of 50 °F and above. Grit Safety Anti-Slip Tape may be... [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0275
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Carrier / Backing: Plastic / Polymer; Polyvinyl Chloride
from Deviser, Inc.
Friction Tape is cotton cloth impregnated with a unique brown scientifically compounded natural rubber and synthetic rubber blend adhesive. It offers good mechanical protection against abrasion and penetration of low voltage cable, splices and wire. It ’s suitable for temporary binding and... [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0150
- Type: Reflective or Flagging Safety Tape (optional feature); Industrial Tape
- Carrier / Backing: Cloth / Fabric; Rubber
from Shenzhen You-San Technology Co., Ltd.
Warning tape is made of PVC film and coated with special high performance rubber. It has good flexibility, good Tensile Strength, high abrasion resistance, colour diversity, no fading, long lasting adhesion, repeatable positioning, acid and alkali resistance, water resistance, friction resistance,... [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0051 to 0.0063
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Carrier / Backing: Plastic / Polymer; Polyvinyl Chloride; Rubber
from Berry Plastics Corporation - Engineered Materials Division
Patco 503R. Colored Polyethylene Tape. This product offers durable conformability combined with an aggressive permanent rubber based adhesive. Applications. Designed as a general purpose sealing, seaming, splicing, and spiral wrapping tape. Recyclable splice tape for polyethylene films. [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0055
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Carrier / Backing: Plastic / Polymer
from Shurtape Technologies, LLC
UV-resistant SPVC line set tape, available in a variety of colors, used for general purpose floor, lane and aisle marking, color-coding and identification applications, as well as in the HVAC industry to wrap line sets, seam Rubatex and Armaflex, and insulate air ducts and underground pipes. VP 410... [See More]
- Adhesive: Single; Pressure Sensitive; Rubber
- Width: 0.9843 to 2.95
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Thickness: 0.0052
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Vinyl Tape 471 Green, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, dead stretch properties to provide straighter lines, clean removal, good solvent resistance. 3M ™ Vinyl Tape 471, ideal for masking,... [See More]
- Adhesive: Single; Rubber
- Width: 1
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Thickness: 0.0052
from NADCO Tapes & Labels, Inc.
Mineral-coated film non-slip tape, possessing one side that is pressure sensitive. This anti-slip grit tape is protected by a removable liner. Applications: Our 189Y/B non-skid tape is recommended for surface application temperatures of 50 °F and above. This anti-slip tape may be applied to... [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0230
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Peel: 5 to 8.12
from Deviser, Inc.
Gaffer ’s tape is a matte finish coated cloth tape with good adhesion, high tensile strength, conformability and easy tear. It is designed to use in entertainment industry where light reflection is a concern. It ’s used in a wide variety of applications which include temporary holding of... [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0110
- Type: Reflective or Flagging Safety Tape (optional feature); Industrial Tape
- Carrier / Backing: Cloth / Fabric
from Berry Plastics Corporation - Engineered Materials Division
Patco 152. PVC Color Coding & Aisle Marking Tape. General purpose PVC film tape with rubber-based adhesive. Applications. Color coding ,identification, aisle and floor marking, spiral wrapping, sealing and decorative masking. Features & Benefits. High abrasion resistance. Conforms well to... [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0060
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Carrier / Backing: Plastic / Polymer; Polyvinyl Chloride
from Shurtape Technologies, LLC
An SPVC film warning stripe tape used for lane marking and identification of safety zones and hazard areas. VP 415 is constructed with a flexible backing that is resistant to abrasion, UV light, acid, alkalides, oils, moisture, humidity and corrosion, and meets OSHA requirements for hazard markings. [See More]
- Adhesive: Single; Pressure Sensitive; Rubber
- Width: 1.97
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Thickness: 0.0066
from 3M Aerospace and Aircraft Maintenance Division
3M ™ Vinyl Tape 471 Red, 5.2 mil (0.13 mm), vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, dead stretch properties to provide straighter lines, clean removal, good solvent resistance. 3M ™ Vinyl Tape 471, ideal for masking, wrapping... [See More]
- Adhesive: Single; Rubber
- Width: 1
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Thickness: 0.0052
from NADCO Tapes & Labels, Inc.
Self Wound Vinyl anti-slip tape is of superior quality, possessing a long shelf-life, and "write-on" capability. And, this non-skid tape provides a very effective vapor and moisture barrier. Self wound vinyl anti-slip tape is highly conformable and resistant to aging, sun, water, fungue, bacteria,... [See More]
- Adhesive: Single; Rubber
- Carrier / Backing: Plastic / Polymer; Polyvinyl Chloride
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Features: Permanent; UV or Weather Resistant
from Deviser, Inc.
Hazard Warning Tape comes with alternative colored stripes and is designed to mark floors and objects to identify safety areas or situations that are required under the Occupational Safety and Health Act (OSHA). The natural rubber adhesive system provides high initial bond strength to most surfaces. [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0070
- Type: Reflective or Flagging Safety Tape (optional feature); Industrial Tape
- Carrier / Backing: Plastic / Polymer; Polyvinyl Chloride
from Berry Plastics Corporation - Engineered Materials Division
Polyken 860. ROAD TAPE. Polyethylene tape with extra thick butyl rubber adhesive. Applications. *Used to secure traffic counters to the road surface. * Securing objects to rough asphalt surfaces. Features & Benefits. *Extra thick butyl rubber adhesive for superior adhesion to asphalt and other... [See More]
- Adhesive: Single; Rubber
- Thickness: 0.0550
- Type: Reflective or Flagging Safety Tape; Industrial Tape
- Carrier / Backing: Plastic / Polymer