Audible or Visual Alarms Combustion Analyzers
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Features: Audible or Visual Alarms; Hazardous Environment; Self Calibration (optional feature)
- Number of Gases Monitored: Multi
- Mounting Type: Fixed
- Measurement Type: %Volume
from ABB Measurement & Analytics
The H2 purity and purge gas monitor AK100 provides a complete system for monitoring hydrogen purity during normal operation and purge gas monitoring during commissioning and decommissioning of the generator. [See More]
- Features: Audible or Visual Alarms; Hazardous Environment; Intrinsically Safe
- Analyzer Technology: Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Control Instruments Corp.
Control Instruments' CalorVal BTU Analyzer is a micro-combustion calorimeter. Because of its unique construction and operating technology, it is the optimum analyzer for directly measuring the total heating value of varying waste gas streams of industrial processes. Continuous & Direct measure... [See More]
- Features: Audible or Visual Alarms; Hazardous Environment; Sampling Pump; Self Calibration; Temperature
- Analyzer Technology: Micro-combustion calorimeter
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Features: Audible or Visual Alarms
- Analyzer Technology: Infrared (optional feature)
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring. [See More]
- Features: Audible or Visual Alarms; Data Logger
- Analyzer Technology: Zirconia
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Control Instruments Corp.
For flammable gas monitoring in relatively clean, low temperature, low concentration applications. It ’s suitable for single or select solvent ranges and can also be used for mixtures of solvents in processes where normal solvent concentrations are below 25% LFL. Built on proven industrial... [See More]
- Features: Audible or Visual Alarms; Controller; Self Calibration
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Single; Multi
from Owlstone Inc.
Lonestar is a portable gas analyzer that can detect a broad range of analytes at part per billion concentrations, with high selectivity in just a few seconds. [See More]
- Features: Audible or Visual Alarms; Controller; Data Logger; Interchangeable Probes; Temperature
- Analyzer Technology: PID
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Eagle Eye Power Solutions, LLC
The Eagle Eye HGD-2000 Hydrogen Gas Detector allows the user to monitor hydrogen gas buildup in storage room and facilities that house batteries - including forklifts, golf carts, backup power supplies, and battery charging stations. Lead-acid batteries on charge emit hydrogen gas after reaching the... [See More]
- Features: Audible or Visual Alarms; Controller
- Number of Gases Monitored: Single; Multi
- Mounting Type: Fixed
- Measurement Type: %LEL or %LFL
from Emerson Automation Solutions – Rosemount
The CCO 5500 Carbon Monoxide (CO) Analyzer uses infrared absorption spectroscopy to continuously measure CO concentration in combustion flue gases. The infrared source is mounted directly on the flue gas duct or stack on the side opposite from the receiver. Infrared energy is radiated by the source,... [See More]
- Features: Audible or Visual Alarms; Controller
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Det-Tronics
The Det-Tronics Eagle Quantum Premier (EQP) Fire and Gas Detection/Releasing System serves the monitoring and protection functions in hazardous areas. This microprocessor based module performs communication and control functions of the fire and gas safety system. NEW! Ethernet Interface Board option... [See More]
- Features: Audible or Visual Alarms; Controller
- Number Channels: 8
- Application: Ambient Air Monitoring
- Response Time: 0.1000
from Honeywell Analytics, Inc.
A fast response device detecting down to ppb of toxic gases, providing physical evidence of a gas event. This use-anywhere, fast response monitor is specific to your target gas only. Until now, the big concern with basic units for toxic gas monitoring was that environmental conditions or other... [See More]
- Features: Audible or Visual Alarms; Hazardous Environment
- Analyzer Technology: Chemcassette. Pyrolyzer option.
- Mounting Type: Portable; Fixed
- Number of Gases Monitored: Single
from RKI Instruments, Inc.
Long life light source, no reference gas required, continuous measurement [See More]
- Features: Audible or Visual Alarms; Hazardous Environment
- Analyzer Technology: Optical Interferometric
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Roscid Technologies
The Model CH-Trans is simple, accurate and. very simple to use in measuring the % levels of hydro carbons. three wire hydrocarbon transmitter. The Model CH-Trans is simple, accurate and very simple to use in measuring the % levels of hydro carbons. One User specific measuring range. The unit offers... [See More]
- Features: Audible or Visual Alarms
- Number of Gases Monitored: Multi
- Analyzer Technology: Infrared
- Measurement Type: %Volume
from Environment One Corporation
E/One's Generator Gas Analyzer (GGA) for hydrogen-cooled generators is a triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. We've taken a proven monitoring principle — thermal conductivity — and improved upon it. The... [See More]
- Features: Audible or Visual Alarms; Controller; Data Logger; Hazardous Environment; Intrinsically Safe; Self Calibration
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Roscid Technologies
This medical gas analyzer is designed for fast, accurate and economic measurement of CO and Dew Point in medical air applications. A simple menu-driven software and LED-display allows easy and fast start-up of the instrument. Ranges. The CO can be measured in the range of 0 – 50 ppm and the... [See More]
- Features: Audible or Visual Alarms; Sensor Array (optional feature)
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical; Capacitive Sensor
- Measurement Type: Trace
from Environment One Corporation
Environment One's standard Generator Gas Analyzer (GGA) can also be supplied in a portable configuration. The PGA incorporates the same hydrogen gas sensor/analyzer and system electronics found in our other hydrogen gas purity systems. The PGA is specifically intended for use in non-hazardous... [See More]
- Features: Audible or Visual Alarms; Controller; Data Logger; Intrinsically Safe; Self Calibration
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Single