Self Calibration Combustion Analyzers
from Control Instruments Corp.
Control Instruments' CalorVal BTU Analyzer is a micro-combustion calorimeter. Because of its unique construction and operating technology, it is the optimum analyzer for directly measuring the total heating value of varying waste gas streams of industrial processes. Continuous & Direct measure... [See More]
- Features: Audible or Visual Alarms; Hazardous Environment; Sampling Pump; Self Calibration; Temperature
- Analyzer Technology: Micro-combustion calorimeter
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Control Instruments Corp.
For flammable gas monitoring in relatively clean, low temperature, low concentration applications. It ’s suitable for single or select solvent ranges and can also be used for mixtures of solvents in processes where normal solvent concentrations are below 25% LFL. Built on proven industrial... [See More]
- Features: Audible or Visual Alarms; Controller; Self Calibration
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Single; Multi
from Teledyne Monitor Labs, Inc.
The sensor-e ® NOx uses the proven. chemiluminescence detection principle,. coupled with state-of-the-art. microprocessor technology to provide. the sensitivity, stability and ease. of use needed for ambient or CEM. monitoring requirements. The analyzer uses multi-tasking software. which allows... [See More]
- Features: Data Logger; Self Calibration
- Analyzer Technology: Chemiluminescence
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Nova Analytical Systems Inc.
The Nova 8000 series has been designed for the continuous monitoring of pre-cleaned gases from a blast furnace or other high intensity, continuous industrial processes. The analyzer measures up to four gases simultaneously - O2, CO, CO2, and H2, the ranges of which are shown below. From these... [See More]
- Features: Audible or Visual Alarms (optional feature); Hazardous Environment (optional feature); Sampling Pump; Self Calibration
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature); Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Environment One Corporation
E/One's Generator Gas Analyzer (GGA) for hydrogen-cooled generators is a triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. We've taken a proven monitoring principle — thermal conductivity — and improved upon it. The... [See More]
- Features: Audible or Visual Alarms; Controller; Data Logger; Hazardous Environment; Intrinsically Safe; Self Calibration
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Process Sensing Technologies USA
The XZR500 oxygen analyzer from Michell Instruments is designed to determine the excess air required for optimum combustion. It uses advanced Zirconium Oxide technology to measure levels of oxygen in harsh conditions such as boilers, incinerators, cremators and furnaces. It provides fast, accurate... [See More]
- Features: Self Calibration
- Measurement Type: %Volume
- Analyzer Technology: Zirconium Oxide Sensor with metallic sealed reference and K Type T/C
- Gas Types: O2 (0.01 - 25% Oxygen)
from Nova Analytical Systems Inc.
Bright digital readout, long life sensors, fast response time [See More]
- Features: Audible or Visual Alarms; Hazardous Environment; Sampling Pump; Self Calibration
- Analyzer Technology: Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Environment One Corporation
Environment One's standard Generator Gas Analyzer (GGA) can also be supplied in a portable configuration. The PGA incorporates the same hydrogen gas sensor/analyzer and system electronics found in our other hydrogen gas purity systems. The PGA is specifically intended for use in non-hazardous... [See More]
- Features: Audible or Visual Alarms; Controller; Data Logger; Intrinsically Safe; Self Calibration
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Single