Single Gas Combustion Analyzers
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring. [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconia
- Mounting Type: Fixed
- Measurement Type: %Volume
from Control Instruments Corp.
For flammable gas monitoring in relatively clean, low temperature, low concentration applications. It ’s suitable for single or select solvent ranges and can also be used for mixtures of solvents in processes where normal solvent concentrations are below 25% LFL. Built on proven industrial... [See More]
- Number of Gases Monitored: Single; Multi
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Measurement Type: %LEL or %LFL
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted into the furnace or flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion optimization, process control and furnace atmosphere monitoring. [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconia
- Mounting Type: Fixed
- Measurement Type: %Volume
from Control Instruments Corp.
The Model SNR705 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR705 to sample low oxygen and... [See More]
- Number of Gases Monitored: Single; Multi
- Analyzer Technology: Flame temperature sensor
- Mounting Type: Fixed
- Measurement Type: %LEL or %LFL
from Bacharach, Inc.
Fast, accurate measurement of CO for both ambient air and flue gas applications. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Advanced features like trending display and a 15-minute CO ambient test. Available accessories for appliance testing, differential temperature... [See More]
- Number of Gases Monitored: Single
- Gas Types: CO (0 - 2,000 ppm in 1 ppm Increments)
- Measurement Type: Trace
- Display: Digital
from COSA Xentaur Corporation
The COSA/Xentaur Continuous Hydrogen Analyzer (CHA), used in countless UOP Schedule A applications for many years, is built under a license to a patented UOP design. It provides petroleum refiners, petrochemical producers, and electric power generators a means to continuously and accurately monitor... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Mounting Type: Fixed
- Measurement Type: %Volume
from Environment One Corporation
E/One's Generator Gas Analyzer (GGA) for hydrogen-cooled generators is a triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. We've taken a proven monitoring principle — thermal conductivity — and improved upon it. The... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Measurement Type: %Volume; Leakage
from Teledyne Monitor Labs, Inc.
The sensor-e ® CO (TML30) measures. carbon monoxide by comparing. infrared energy absorbed by a sample. to that absorbed by a reference gas. according to the Beer-Lambert law. This is accomplished with a Gas Filter. wheel which alternately allows a high. energy light source to pass through. a CO... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Measurement Type: Trace
from Eagle Eye Power Solutions, LLC
The Eagle Eye HGD-2000 Hydrogen Gas Detector allows the user to monitor hydrogen gas buildup in storage room and facilities that house batteries - including forklifts, golf carts, backup power supplies, and battery charging stations. Lead-acid batteries on charge emit hydrogen gas after reaching the... [See More]
- Number of Gases Monitored: Single; Multi
- Measurement Type: %LEL or %LFL
- Mounting Type: Fixed
- Application: Confined Space Entry; Ambient Air Monitoring
from Sensidyne, LP
The Sensidyne Compressed Breathing Air (CBA) Analysis Kit allows anyone to simply, quickly, and quantitatively measure all four of the common contaminants in breathing air, plus oxygen defeciency. [See More]
- Number of Gases Monitored: Single
- Measurement Type: %Volume (optional feature); Trace (optional feature)
- Mounting Type: Portable
- Application: Personal Exposure Monitoring; Confined Space Entry; Continuous Emissions Monitoring; Ambient Air Monitoring; Process Gas
from Emerson Automation Solutions – Rosemount
The CCO 5500 Carbon Monoxide (CO) Analyzer uses infrared absorption spectroscopy to continuously measure CO concentration in combustion flue gases. The infrared source is mounted directly on the flue gas duct or stack on the side opposite from the receiver. Infrared energy is radiated by the source,... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Measurement Type: Trace
from Nova Analytical Systems Inc.
The Nova 4230 Process Hydrogen Analyzer has been specifically designed for the accurate measurement of H2 in exothermic or 'DX' gas from a furnace, generator, or other processes with high levels of H2 and CO2. The CO2 acts as an interference to the measurement of Hydrogen when using a thermal... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Thermal Conductivity Cell
- Mounting Type: Fixed
- Measurement Type: %Volume
from Roscid Technologies
The Model CO Tracer is simple, accurate and very economic measurement of CO in the ppm levels. The sensor comes fully calibrated and requires no calibration for two years. The CO Tracer uses a special electro chemical cell to measure the CO concentration. The sensor meets the industrial requirements... [See More]
- Number of Gases Monitored: Single
- Measurement Type: Trace
- Analyzer Technology: Electrochemical
- Gas Types: CO (0-50ppm)
from Honeywell Analytics, Inc.
A fast response device detecting down to ppb of toxic gases, providing physical evidence of a gas event. This use-anywhere, fast response monitor is specific to your target gas only. Until now, the big concern with basic units for toxic gas monitoring was that environmental conditions or other... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Chemcassette. Pyrolyzer option.
- Mounting Type: Portable; Fixed
- Measurement Type: Trace
from Environment One Corporation
Environment One's standard Generator Gas Analyzer (GGA) can also be supplied in a portable configuration. The PGA incorporates the same hydrogen gas sensor/analyzer and system electronics found in our other hydrogen gas purity systems. The PGA is specifically intended for use in non-hazardous... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Measurement Type: %Volume; Leakage
from Emerson Automation Solutions – Rosemount
Traditional in situ oxygen flue gas analyzers utilize zirconium oxide sensors to measure excess oxygen in process flue gas. These zirconium oxide sensors use a principle of operation based on the Nernst equation. This principle requires that the sensor cell be maintained at a high operating... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Measurement Type: %Volume
from Nova Analytical Systems Inc.
The Nova 900 Series analyzers have been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas without the need for cooling water, compressed air, or failure-prone thermoelectric elements. The 900... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature)
- Mounting Type: Fixed
- Measurement Type: %Volume
from Roscid Technologies
This medical gas analyzer is designed for fast, accurate and economic measurement of CO and Dew Point in medical air applications. A simple menu-driven software and LED-display allows easy and fast start-up of the instrument. Ranges. The CO can be measured in the range of 0 – 50 ppm and the... [See More]
- Number of Gases Monitored: Single
- Measurement Type: Trace
- Analyzer Technology: Electrochemical; Capacitive Sensor
- Application: Ambient Air Monitoring
from Emerson Automation Solutions – Rosemount
Rosemount Analytical is the leader in oxygen flue gas analyzer technology. The 6888 continues the tradition of integrating an oxygen probe and field electronics into a single, compact package. The probe inserts directly into a flue gas duct to measure oxygen in combustion processes. No sampling... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Measurement Type: %Volume
from Nova Analytical Systems Inc.
The Nova 8000 series has been designed for the continuous monitoring of pre-cleaned gases from a blast furnace or other high intensity, continuous industrial processes. The analyzer measures up to four gases simultaneously - O2, CO, CO2, and H2, the ranges of which are shown below. From these... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature); Thermal Conductivity Cell
- Mounting Type: Fixed
- Measurement Type: %Volume
from Roscid Technologies
The Model H2S-Tracer is simple, accurate and very economic measurement of Hydrogen Sulfide at ppm levels. [See More]
- Number of Gases Monitored: Single
- Gas Types: H2S
- Measurement Type: Trace
- Display: Digital
from Emerson Automation Solutions – Rosemount
The OCX 8800 with its rugged design, stable sensor, electronics and software package, is the most dependable oxygen/combustibles transmitter on the market. The time-tested and world renowned zirconium oxide sensor is the basis for the oxygen measurement. This, coupled with the new combustibles... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Measurement Type: %Volume
from Nova Analytical Systems Inc.
The Nova Model 7200-1-F1 flue gas analyzer is specifically designed for use on the flue gases from combustion processes burning gaseous fuels.Sample Gas is drawn into the analyzer from the sampling probe, then pumped through a condensate removal system. Any condensate formed collects and is purged... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature); Zirconia, Para-Magnetic
- Mounting Type: Fixed
- Measurement Type: %Volume (optional feature); Trace (optional feature)
from Roscid Technologies
The Model H2Trans is simple, accurate and economic measurement of Hydrogen at trace and % levels. A simple Display and one point calibration allow easy and fast start-up of the instrument. Optional 1/2 G Ex ia IIC T4 (ATEX). Specifications. Measuring range. ppm : 100 – 100000 ppm H2. [See More]
- Number of Gases Monitored: Single
- Measurement Type: Trace
- Analyzer Technology: Electrochemical
- Application: Process Gas
from Emerson Automation Solutions – Rosemount
Emerson is the leader in oxygen flue gas analyzer technology. Our Hagan in situ, zirconium oxide oxygen analyzers have long been established as industry standards. We've combined our Hagan expertise with the latest Rosemount Analytical transmitter technology to create a truly revolutionary package;... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Measurement Type: %Volume
from Nova Analytical Systems Inc.
The Nova 7900 Series Heat Treat Analyzer System utilizes high stability infrared detectors for the simultaneous measurement of CO, CO2, and CH4. In addition, the analyzer can also be supplied with a non-consumable, long life thermal conductivity cell for hydrogen that is compensated for the... [See More]
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature); Thermal Conductivity Cell
- Mounting Type: Fixed
- Measurement Type: %Volume (optional feature); Trace (optional feature)
from Roscid Technologies
The Model O2Tracer-M is simple to use, accurate and very economical. Features. Oxygen Transmitter with a display. 4 – 20 mA Loop Powered two wire. Two Wire Process Oxygen analyzer. Calibration : performed at Ambient O2. Accuracy : +/- 2% FSD T= const. +/- 5% FSD 0 >T >50 °C. Response... [See More]
- Number of Gases Monitored: Single
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical
- Application: Process Gas