Digital Combustion Analyzers
from ABB Measurement & Analytics
The H2 purity and purge gas monitor AK100 provides a complete system for monitoring hydrogen purity during normal operation and purge gas monitoring during commissioning and decommissioning of the generator. [See More]
- Display: Digital
- Analyzer Technology: Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Display: Digital
- Number of Gases Monitored: Multi
- Mounting Type: Fixed
- Measurement Type: %Volume
from Control Instruments Corp.
Control Instruments' CalorVal BTU Analyzer is a micro-combustion calorimeter. Because of its unique construction and operating technology, it is the optimum analyzer for directly measuring the total heating value of varying waste gas streams of industrial processes. Continuous & Direct measure... [See More]
- Display: Digital
- Analyzer Technology: Micro-combustion calorimeter
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring. [See More]
- Display: Digital
- Analyzer Technology: Zirconia
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Display: Digital
- Analyzer Technology: Infrared (optional feature)
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Control Instruments Corp.
For flammable gas monitoring in relatively clean, low temperature, low concentration applications. It ’s suitable for single or select solvent ranges and can also be used for mixtures of solvents in processes where normal solvent concentrations are below 25% LFL. Built on proven industrial... [See More]
- Display: Digital
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Single; Multi
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted into the furnace or flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion optimization, process control and furnace atmosphere monitoring. [See More]
- Display: Digital
- Analyzer Technology: Zirconia
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Control Instruments Corp.
The Model SNR701 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR701 to sample low oxygen and... [See More]
- Display: Digital
- Analyzer Technology: Flame temperature sensor
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from ABB Measurement & Analytics
ABB ’s new ACF5000 is the specialist for emission and process monitoring from the pioneers in FTIR CEMS. It is available in the 4th generation. Since introduction in 1993, ABB has sold more than 2000 units. The standard system design combines the advantages of a FTIR spectrometer, flame... [See More]
- Display: Digital
- Number of Gases Monitored: Multi
- Mounting Type: Fixed
- Measurement Type: %Volume; Trace
from Roscid Technologies
The Model CH-Trans is simple, accurate and. very simple to use in measuring the % levels of hydro carbons. three wire hydrocarbon transmitter. The Model CH-Trans is simple, accurate and very simple to use in measuring the % levels of hydro carbons. One User specific measuring range. The unit offers... [See More]
- Display: Digital
- Number of Gases Monitored: Multi
- Analyzer Technology: Infrared
- Measurement Type: %Volume
from Honeywell Analytics, Inc.
A fast response device detecting down to ppb of toxic gases, providing physical evidence of a gas event. This use-anywhere, fast response monitor is specific to your target gas only. Until now, the big concern with basic units for toxic gas monitoring was that environmental conditions or other... [See More]
- Display: Digital
- Analyzer Technology: Chemcassette. Pyrolyzer option.
- Mounting Type: Portable; Fixed
- Number of Gases Monitored: Single
from Eagle Eye Power Solutions, LLC
The Eagle Eye HGD-2000 Hydrogen Gas Detector allows the user to monitor hydrogen gas buildup in storage room and facilities that house batteries - including forklifts, golf carts, backup power supplies, and battery charging stations. Lead-acid batteries on charge emit hydrogen gas after reaching the... [See More]
- Display: Digital
- Number of Gases Monitored: Single; Multi
- Mounting Type: Fixed
- Measurement Type: %LEL or %LFL
from Cubic Sensor and Instrument Co.,Ltd.
High precision automobile emission gas analyzer Gasboard-3000E is based on advanced 00 class emission standards, mainly used for measuring exhaust gases of CO, CO2, HC, O2, NO from petro, gasoline, CNG engines, for car testings lines, garage stations and so on [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Det-Tronics
The Det-Tronics Eagle Quantum Premier (EQP) Fire and Gas Detection/Releasing System serves the monitoring and protection functions in hazardous areas. This microprocessor based module performs communication and control functions of the fire and gas safety system. NEW! Ethernet Interface Board option... [See More]
- Display: Digital
- Number Channels: 8
- Application: Ambient Air Monitoring
- Response Time: 0.1000
from Environment One Corporation
E/One's Generator Gas Analyzer (GGA) for hydrogen-cooled generators is a triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. We've taken a proven monitoring principle — thermal conductivity — and improved upon it. The... [See More]
- Display: Digital
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Teledyne Monitor Labs, Inc.
The sensor-e ® NOx uses the proven. chemiluminescence detection principle,. coupled with state-of-the-art. microprocessor technology to provide. the sensitivity, stability and ease. of use needed for ambient or CEM. monitoring requirements. The analyzer uses multi-tasking software. which allows... [See More]
- Display: Digital
- Analyzer Technology: Chemiluminescence
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Owlstone Inc.
Lonestar is a portable gas analyzer that can detect a broad range of analytes at part per billion concentrations, with high selectivity in just a few seconds. [See More]
- Display: Digital
- Analyzer Technology: PID
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Nova Analytical Systems Inc.
The Nova 4230 Process Hydrogen Analyzer has been specifically designed for the accurate measurement of H2 in exothermic or 'DX' gas from a furnace, generator, or other processes with high levels of H2 and CO2. The CO2 acts as an interference to the measurement of Hydrogen when using a thermal... [See More]
- Display: Digital
- Analyzer Technology: Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from RKI Instruments, Inc.
Long life light source, no reference gas required, continuous measurement [See More]
- Display: Digital
- Analyzer Technology: Optical Interferometric
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Emerson Automation Solutions – Rosemount
The CCO 5500 Carbon Monoxide (CO) Analyzer uses infrared absorption spectroscopy to continuously measure CO concentration in combustion flue gases. The infrared source is mounted directly on the flue gas duct or stack on the side opposite from the receiver. Infrared energy is radiated by the source,... [See More]
- Display: Digital
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Bacharach, Inc.
Fast, accurate measurement of CO for both ambient air and flue gas applications. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Advanced features like trending display and a 15-minute CO ambient test. Available accessories for appliance testing, differential temperature... [See More]
- Display: Digital
- Measurement Type: Trace
- Number of Gases Monitored: Single
- Gas Types: CO (0 - 2,000 ppm in 1 ppm Increments)
from COSA Xentaur Corporation
The COSA 707 is a hand held multigas analyzer for industrial and combustion processes. The COSA 707 is an easy to hold, hand-held emissions analyzers capable of measuring up to seven different gases. The emissions analyzer can be equipped with up to 6 electrochemical sensors and a CO2 IR-bench for... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical
- Mounting Type: Handheld; Portable
- Number of Gases Monitored: Multi
from Roscid Technologies
This medical gas analyzer is designed for fast, accurate and economic measurement of CO and Dew Point in medical air applications. A simple menu-driven software and LED-display allows easy and fast start-up of the instrument. Ranges. The CO can be measured in the range of 0 – 50 ppm and the... [See More]
- Display: Digital
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical; Capacitive Sensor
- Measurement Type: Trace
from Cubic Sensor and Instrument Co.,Ltd.
Automobile emission gas analyzer Gasboard-5020 is a portable type exhaust gas analyzer, mainly used for measuring exhaust gases of CO, CO2, HC, O2, NO from petro, gasoline, CNG engines, with built-in printer, high accuracy, stable performance and easy operation. [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Environment One Corporation
Environment One's standard Generator Gas Analyzer (GGA) can also be supplied in a portable configuration. The PGA incorporates the same hydrogen gas sensor/analyzer and system electronics found in our other hydrogen gas purity systems. The PGA is specifically intended for use in non-hazardous... [See More]
- Display: Digital
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Nova Analytical Systems Inc.
The Nova 900 Series analyzers have been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas without the need for cooling water, compressed air, or failure-prone thermoelectric elements. The 900... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature)
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Emerson Automation Solutions – Rosemount
Traditional in situ oxygen flue gas analyzers utilize zirconium oxide sensors to measure excess oxygen in process flue gas. These zirconium oxide sensors use a principle of operation based on the Nernst equation. This principle requires that the sensor cell be maintained at a high operating... [See More]
- Display: Digital
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Bacharach, Inc.
Measures O2, CO, stack and air temperature for complete combustion analysis. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Compatible with the Bacharach Reporting App. Six fuels available in North American configuration covering most applications like natural gas, oil... [See More]
- Display: Digital
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Multi
- Gas Types: O2 (0 to 20.9%); CO (0 to 2000 ppm)
from COSA Xentaur Corporation
The COSA/Xentaur Continuous Hydrogen Analyzer (CHA), used in countless UOP Schedule A applications for many years, is built under a license to a patented UOP design. It provides petroleum refiners, petrochemical producers, and electric power generators a means to continuously and accurately monitor... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Roscid Technologies
The Model H2S-Tracer is simple, accurate and very economic measurement of Hydrogen Sulfide at ppm levels. [See More]
- Display: Digital
- Measurement Type: Trace
- Number of Gases Monitored: Single
- Gas Types: H2S
from Cubic Sensor and Instrument Co.,Ltd.
Handheld biogas analyzer Gasboard-3200Plus is handheld type analyzer, mainly used for measuring biogas compositions of CH4, CO2, O2, H2S and optional H2, CO gases, with high accuracy, stable performance and easy carrying features, widely used in anaerobic digestion biogas, waste water treatment... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Handheld; Portable
- Number of Gases Monitored: Multi
from Nova Analytical Systems Inc.
The Nova 8000 series has been designed for the continuous monitoring of pre-cleaned gases from a blast furnace or other high intensity, continuous industrial processes. The analyzer measures up to four gases simultaneously - O2, CO, CO2, and H2, the ranges of which are shown below. From these... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature); Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Bacharach, Inc.
Industry-exclusive Tune Rite ® on-demand HVAC “assistant ”. Measures O2, CO (w/NOx filter), stack/air temperature and draft/pressure. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Standard 3 year O2 sensor. Compatible with the Bacharach Reporting App... [See More]
- Display: Digital
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Multi
- Gas Types: O2 (20.9%); CO (0 to 4,000 ppm)
from Roscid Technologies
The Model H2Trans is simple, accurate and economic measurement of Hydrogen at trace and % levels. A simple Display and one point calibration allow easy and fast start-up of the instrument. Optional 1/2 G Ex ia IIC T4 (ATEX). Specifications. Measuring range. ppm : 100 – 100000 ppm H2. [See More]
- Display: Digital
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Measurement Type: Trace
from Cubic Sensor and Instrument Co.,Ltd.
Combustion analyzers are available for HVAC, boiler, industrial and flue gas monitoring applications. A wide range of units is available, with most offering CO2, CO, O2 with advanced NDIR and long life time ECD technology. A new portable type in reliable and accurate combustion analysis with its... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Nova Analytical Systems Inc.
The Nova Model 7200-1-F1 flue gas analyzer is specifically designed for use on the flue gases from combustion processes burning gaseous fuels.Sample Gas is drawn into the analyzer from the sampling probe, then pumped through a condensate removal system. Any condensate formed collects and is purged... [See More]
- Display: Digital
- Analyzer Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature); Zirconia, Para-Magnetic
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Bacharach, Inc.
Measures up to 7 gases simultaneously (minimum O2 and CO), including NOx, SOx and combustibles. Sensors are easily replaced or upgraded in the field. Rugged suitcase design with large, easy-to-read display. Built-in printer for instant traceability and record-keeping. The ECA 450 is an industrial... [See More]
- Display: Digital
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Multi
- Gas Types: NO (0 to 3500 ppm, 0 to 14900 ppm); NO2 (0 to 500 ppm, 0 to 2100 ppm); NxOx (0 to 4000 ppm, 0 to 17000 ppm); SO2 (0 to 4000 ppm); CO2 (0 to Fuel Dependent Maximum); CO (0 to 4000 ppm (Hydrogen Compensated), 4001 to 80000 ppm, 0 to 99999 ppm)
from Roscid Technologies
The Model O2Tracer-M is simple to use, accurate and very economical. Features. Oxygen Transmitter with a display. 4 – 20 mA Loop Powered two wire. Two Wire Process Oxygen analyzer. Calibration : performed at Ambient O2. Accuracy : +/- 2% FSD T= const. +/- 5% FSD 0 >T >50 °C. Response... [See More]
- Display: Digital
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Measurement Type: %Volume
from Cubic Sensor and Instrument Co.,Ltd.
Online flue gas analyzer Gasboard-3000UV is designed with advanced UV DOAS technology for ultra-low SO2,NO,O2 measurement, this model is an ideal solution with CE certification for pollution emission monitoring in boiler, power, cement, incinerator, furnace, steel and other industrial applications. [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; UV DOAS
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Nova Analytical Systems Inc.
The Nova 350 Series Portable Flue Gas Analyzer has been designed for accuracy, reliability, ease of use and ease of service. It uses customer replaceable sensors which respond quickly to the Oxygen (O2) and combustibles present in the flue gas sample. The sensor life expectancy is between 2 and 3... [See More]
- Display: Digital
- Analyzer Technology: Catalytic; Electrochemical
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Bacharach, Inc.
Measures up to 4 gases simultaneously (minimum O2 and CO), including NOx using NO only or NO + NO2. Exclusive B-Smart ® pre-calibrated sensors for easy field replacement or upgrades. 3.5 inch color LCD with customizable layout and zoom for viewing the readings you want to see. Ten standard fuels... [See More]
- Display: Digital
- Measurement Type: Trace
- Number of Gases Monitored: Multi
- Gas Types: NO (0 to 9999 ppm); NO2 (0 to 9999 ppm); NxOx (0 to 9999 ppm, 0 to 3500 ppm); SO2 (0 to 9999 ppm); CO2 (0 to Fuel Dependent Maximum); CO (0 to 9999 ppm)
from Roscid Technologies
Two Wire Process Oxygen Analyser. The Model OxyTrans is simple, accurate and an economical way to measure traces and % ranges of Oxygen. The unit has a simple display and offers a one point calibration allowing for a quick start up. optional 1/2 G Ex ia IIC T4 (ATEX). Specific Measuring Range. There... [See More]
- Display: Digital
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Measurement Type: %Volume; Trace
from Cubic Sensor and Instrument Co.,Ltd.
Analyzers for professionals. Excellent portable flue gas analyzer for analyzing various measuring variables like SO2,NO,CO,CO2,O2 based on unique micro-flow NDIR and long life time technology. Cubic-Ruiyi is a leader in the field of portable, stationary measurement solutions. Stable performance and... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Nova Analytical Systems Inc.
The Nova 7900 Series Heat Treat Analyzer System utilizes high stability infrared detectors for the simultaneous measurement of CO, CO2, and CH4. In addition, the analyzer can also be supplied with a non-consumable, long life thermal conductivity cell for hydrogen that is compensated for the... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature); Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Bacharach, Inc.
4.3 inch color touch screen with enhanced viewing options to easily see readings. Bluetooth ® wireless technology allows for live streaming of data to any phone, PC or tablet. Rugged all-in-one probe connection for durability and easy setup. Optional NOx and SO2 sensors with Viton probe tubing... [See More]
- Display: Digital
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Multi
- Gas Types: NO (0 to 3,000 ppm); NO2 (0 to 500 ppm); O2 (0 to 20.9%); SO2 (0 to 5,000 ppm); CO (0 to 40,000 ppm)
from Roscid Technologies
The Model OxyTrans is simple, accurate and Economic measurement of Oxygen at trace and % levels. A simple Display and one point calibration allow easy and fast start-up of the instrument. Features. Measuring ranges. ppm: 0-10, 0 – 100; 0 – 1000;. : 0 – 10000 ppm O2. : 0 – 25;... [See More]
- Display: Digital
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Measurement Type: %Volume; Trace
from Cubic Sensor and Instrument Co.,Ltd.
Laser raman gas analyze?r LRGA-6000 is an advanced equipment that can online measure all the gas composition of most fuel gases, including biogas, syngas, natural gas, producer gas and so on. And with the unique advantages of no consumables, higher accuracy, long lifetime, and no routine calibration... [See More]
- Display: Digital
- Analyzer Technology: Laser Raman
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Nova Analytical Systems Inc.
The Nova Model 7900P Series Heat Treat analyzers utilize a three channel high stability infrared detector for the simultaneous measurement of CO, CO2, and CH4 in exothermic or endothermic gas mixtures. In addition, the analyzer can be supplied with a fully compensated thermal conductivity cell for... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Portable
- Number of Gases Monitored: Single
from Emerson Automation Solutions – Rosemount
The OCX 8800 with its rugged design, stable sensor, electronics and software package, is the most dependable oxygen/combustibles transmitter on the market. The time-tested and world renowned zirconium oxide sensor is the basis for the oxygen measurement. This, coupled with the new combustibles... [See More]
- Display: Digital
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Roscid Technologies
The Model Oxymaster is made for fast, accurate and economic measurement of Oxygen at trace levels. A simple menu-driven software, touch pad and large LCD-display allow easy and fast start-up of the Oxymaster instrument. Specifications. Measuring range: 0 – 8000 ppb O2. free programmable lowest... [See More]
- Display: Digital
- Analyzer Technology: Variety of Sensors Available
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
Online syngas analyzer Gasboard-3100 is a stationary analyzer with standard 19'' 3U rack enclosure, easy to be integrated inside industrial system. It is able to online continuously measure volume concentration of CO, CO2, CH4, H2 , O2 , CnHm, C2H2 , C2H4 simultaneously, and calculate gas heating... [See More]
- Display: Digital
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Nova Analytical Systems Inc.
The Nova 430DPL analyzer utilizes a temperature-controlled T/C cell for the detection of H2 in process gas. This cell produces a small millivoltage output which is directly proportional to the H2 detected. This output is then amplified and displayed on a digital readout meter and is also available... [See More]
- Display: Digital
- Analyzer Technology: Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Emerson Automation Solutions – Rosemount
Emerson is the leader in oxygen flue gas analyzer technology. Our Hagan in situ, zirconium oxide oxygen analyzers have long been established as industry standards. We've combined our Hagan expertise with the latest Rosemount Analytical transmitter technology to create a truly revolutionary package;... [See More]
- Display: Digital
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Number of Gases Monitored: Single