Fixed Combustion Analyzers
from ABB Measurement & Analytics
The H2 purity and purge gas monitor AK100 provides a complete system for monitoring hydrogen purity during normal operation and purge gas monitoring during commissioning and decommissioning of the generator. [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Thermal Conductivity
- Measurement Type: %Volume
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Mounting Type: Fixed
- Measurement Type: %Volume
- Number of Gases Monitored: Multi
- Application: Confined Space Entry
from Control Instruments Corp.
Control Instruments' CalorVal BTU Analyzer is a micro-combustion calorimeter. Because of its unique construction and operating technology, it is the optimum analyzer for directly measuring the total heating value of varying waste gas streams of industrial processes. Continuous & Direct measure... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Micro-combustion calorimeter
- Application: Process Gas
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring. [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconia
- Measurement Type: %Volume
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Infrared (optional feature)
- Application: Confined Space Entry
from Control Instruments Corp.
For flammable gas monitoring in relatively clean, low temperature, low concentration applications. It ’s suitable for single or select solvent ranges and can also be used for mixtures of solvents in processes where normal solvent concentrations are below 25% LFL. Built on proven industrial... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single; Multi
- Analyzer Technology: Infrared
- Measurement Type: %LEL or %LFL
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted into the furnace or flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion optimization, process control and furnace atmosphere monitoring. [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconia
- Measurement Type: %Volume
from Control Instruments Corp.
The Model SNR701 is an industrial strength assembly consisting of a heated flame cell and an integrated controller that continuously measures total flammable vapor concentrations from 0 to 100% of the Lower Flammable Limit (LFL) range. Optional modifications allow the SNR701 to sample low oxygen and... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Flame temperature sensor
- Measurement Type: %LEL or %LFL
from ABB Measurement & Analytics
ABB ’s new ACF5000 is the specialist for emission and process monitoring from the pioneers in FTIR CEMS. It is available in the 4th generation. Since introduction in 1993, ABB has sold more than 2000 units. The standard system design combines the advantages of a FTIR spectrometer, flame... [See More]
- Mounting Type: Fixed
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Multi
- Application: Continuous Emissions Monitoring; Process Gas
from Emerson Automation Solutions – Rosemount
The CCO 5500 Carbon Monoxide (CO) Analyzer uses infrared absorption spectroscopy to continuously measure CO concentration in combustion flue gases. The infrared source is mounted directly on the flue gas duct or stack on the side opposite from the receiver. Infrared energy is radiated by the source,... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Infrared
- Measurement Type: Trace
from Honeywell Analytics, Inc.
A fast response device detecting down to ppb of toxic gases, providing physical evidence of a gas event. This use-anywhere, fast response monitor is specific to your target gas only. Until now, the big concern with basic units for toxic gas monitoring was that environmental conditions or other... [See More]
- Mounting Type: Portable; Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Chemcassette. Pyrolyzer option.
- Measurement Type: Trace
from Nova Analytical Systems Inc.
The Nova 4230 Process Hydrogen Analyzer has been specifically designed for the accurate measurement of H2 in exothermic or 'DX' gas from a furnace, generator, or other processes with high levels of H2 and CO2. The CO2 acts as an interference to the measurement of Hydrogen when using a thermal... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Thermal Conductivity Cell
- Measurement Type: %Volume
from RKI Instruments, Inc.
Long life light source, no reference gas required, continuous measurement [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Optical Interferometric
- Measurement Type: %LEL or %LFL; %Volume
from Cubic Sensor and Instrument Co.,Ltd.
High precision automobile emission gas analyzer Gasboard-3000E is based on advanced 00 class emission standards, mainly used for measuring exhaust gases of CO, CO2, HC, O2, NO from petro, gasoline, CNG engines, for car testings lines, garage stations and so on [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Electrochemical; Infrared
- Measurement Type: %Volume; Trace
from COSA Xentaur Corporation
The COSA/Xentaur Continuous Hydrogen Analyzer (CHA), used in countless UOP Schedule A applications for many years, is built under a license to a patented UOP design. It provides petroleum refiners, petrochemical producers, and electric power generators a means to continuously and accurately monitor... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Measurement Type: %Volume
from Teledyne Monitor Labs, Inc.
The sensor-e ® NOx uses the proven. chemiluminescence detection principle,. coupled with state-of-the-art. microprocessor technology to provide. the sensitivity, stability and ease. of use needed for ambient or CEM. monitoring requirements. The analyzer uses multi-tasking software. which allows... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Chemiluminescence
- Measurement Type: Trace
from Eagle Eye Power Solutions, LLC
The Eagle Eye HGD-2000 Hydrogen Gas Detector allows the user to monitor hydrogen gas buildup in storage room and facilities that house batteries - including forklifts, golf carts, backup power supplies, and battery charging stations. Lead-acid batteries on charge emit hydrogen gas after reaching the... [See More]
- Mounting Type: Fixed
- Measurement Type: %LEL or %LFL
- Number of Gases Monitored: Single; Multi
- Application: Confined Space Entry; Ambient Air Monitoring
from Environment One Corporation
E/One's Generator Gas Analyzer (GGA) for hydrogen-cooled generators is a triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. We've taken a proven monitoring principle — thermal conductivity — and improved upon it. The... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Thermoconductivity
- Measurement Type: %Volume; Leakage
from Roscid Technologies
The Model Oxymaster is made for fast, accurate and economic measurement of Oxygen at trace levels. A simple menu-driven software, touch pad and large LCD-display allow easy and fast start-up of the Oxymaster instrument. Specifications. Measuring range: 0 – 8000 ppb O2. free programmable lowest... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Variety of Sensors Available
- Measurement Type: Trace
from Emerson Automation Solutions – Rosemount
Traditional in situ oxygen flue gas analyzers utilize zirconium oxide sensors to measure excess oxygen in process flue gas. These zirconium oxide sensors use a principle of operation based on the Nernst equation. This principle requires that the sensor cell be maintained at a high operating... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconium Oxide Sensing Element
- Measurement Type: %Volume
from Nova Analytical Systems Inc.
The Nova 900 Series analyzers have been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas without the need for cooling water, compressed air, or failure-prone thermoelectric elements. The 900... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature)
- Measurement Type: %Volume
from Cubic Sensor and Instrument Co.,Ltd.
Continuous biogas analysis system Gasboard-9060 is wall mounted type system supports 24*365 days continuous analysis on wet and dry biogas, mainly used for measuring CH4, CO2, O2, H2S compositions in different biogas, landfill gas, biomethane gas applications, with high accuracy, stable performance,... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Electrochemical; Infrared
- Measurement Type: %Volume; Trace
from Environment One Corporation
Environment One's standard Generator Gas Analyzer (GGA) can also be supplied in a portable configuration. The PGA incorporates the same hydrogen gas sensor/analyzer and system electronics found in our other hydrogen gas purity systems. The PGA is specifically intended for use in non-hazardous... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Thermoconductivity
- Measurement Type: %Volume; Leakage
from Roscid Technologies
The Model O2 Tracer-R is simple, accurate and very economic measurement of Oxygen at a % levels. Features. Measuring range: all ranges between : 0-25% O2. Calibration: with calibration gas( ppm) or air. Accuracy: +/- 2% FS . Response time: 90 % FS at 25 °C. Operating Temperature: 0 – 50C. [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Measurement Type: %Volume
from Emerson Automation Solutions – Rosemount
Rosemount Analytical is the leader in oxygen flue gas analyzer technology. The 6888 continues the tradition of integrating an oxygen probe and field electronics into a single, compact package. The probe inserts directly into a flue gas duct to measure oxygen in combustion processes. No sampling... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Zirconium Oxide Sensing Element
- Measurement Type: %Volume
from Nova Analytical Systems Inc.
The Nova 8000 series has been designed for the continuous monitoring of pre-cleaned gases from a blast furnace or other high intensity, continuous industrial processes. The analyzer measures up to four gases simultaneously - O2, CO, CO2, and H2, the ranges of which are shown below. From these... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature); Thermal Conductivity Cell
- Measurement Type: %Volume
from Cubic Sensor and Instrument Co.,Ltd.
Online flue gas analyzer Gasboard-3000UV is designed with advanced UV DOAS technology for ultra-low SO2,NO,O2 measurement, this model is an ideal solution with CE certification for pollution emission monitoring in boiler, power, cement, incinerator, furnace, steel and other industrial applications. [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Electrochemical; UV DOAS
- Measurement Type: %Volume
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Measurement Type: %Volume; Trace
from Nova Analytical Systems Inc.
The Nova Model 7200-1-F1 flue gas analyzer is specifically designed for use on the flue gases from combustion processes burning gaseous fuels.Sample Gas is drawn into the analyzer from the sampling probe, then pumped through a condensate removal system. Any condensate formed collects and is purged... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Catalytic (optional feature); Electrochemical (optional feature); Infrared (optional feature); Zirconia, Para-Magnetic
- Measurement Type: %Volume (optional feature); Trace (optional feature)
from Cubic Sensor and Instrument Co.,Ltd.
Laser raman gas analyze?r LRGA-6000 is an advanced equipment that can online measure all the gas composition of most fuel gases, including biogas, syngas, natural gas, producer gas and so on. And with the unique advantages of no consumables, higher accuracy, long lifetime, and no routine calibration... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Laser Raman
- Measurement Type: %Volume
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Measurement Type: %Volume; Trace
from Nova Analytical Systems Inc.
The Nova 7900 Series Heat Treat Analyzer System utilizes high stability infrared detectors for the simultaneous measurement of CO, CO2, and CH4. In addition, the analyzer can also be supplied with a non-consumable, long life thermal conductivity cell for hydrogen that is compensated for the... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature); Thermal Conductivity Cell
- Measurement Type: %Volume (optional feature); Trace (optional feature)
from Cubic Sensor and Instrument Co.,Ltd.
Online syngas analyzer Gasboard-3100 is a stationary analyzer with standard 19'' 3U rack enclosure, easy to be integrated inside industrial system. It is able to online continuously measure volume concentration of CO, CO2, CH4, H2 , O2 , CnHm, C2H2 , C2H4 simultaneously, and calculate gas heating... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Electrochemical; Infrared
- Measurement Type: %Volume
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Measurement Type: %Volume; Trace
from Nova Analytical Systems Inc.
The Nova 430DPL analyzer utilizes a temperature-controlled T/C cell for the detection of H2 in process gas. This cell produces a small millivoltage output which is directly proportional to the H2 detected. This output is then amplified and displayed on a digital readout meter and is also available... [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Single
- Analyzer Technology: Thermal Conductivity Cell
- Measurement Type: %Volume
from Cubic Sensor and Instrument Co.,Ltd.
NDIR gas bench Gasboard-2000 is based on NDIR technology for measuring CO, CO2, HC gases, which are exhausted from petro, gasoline, CNG engines, with high accuracy, easy integration and developing on emission gas analyzer [See More]
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
- Analyzer Technology: Infrared
- Measurement Type: %Volume; Trace