%Volume Combustion Analyzers
from Fuji Electric Corp. of America
Optimization of combustion efficiency and compliance with environmental standards. Ideal for combustion control in boilers, incinerators, and furnaces. Lowering CO ₂, SOx, and NOx emissions while saving energy. This oxygen analyzer is used to continuously measure oxygen concentration in the... [See More]
- Measurement Type: %Volume
- Number of Gases Monitored: Multi
- Mounting Type: Fixed
- Application: Confined Space Entry
from ABB Measurement & Analytics
The H2 purity and purge gas monitor AK100 provides a complete system for monitoring hydrogen purity during normal operation and purge gas monitoring during commissioning and decommissioning of the generator. [See More]
- Measurement Type: %Volume
- Analyzer Technology: Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring. [See More]
- Measurement Type: %Volume
- Analyzer Technology: Zirconia
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from ABB Measurement & Analytics
The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted into the furnace or flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion optimization, process control and furnace atmosphere monitoring. [See More]
- Measurement Type: %Volume
- Analyzer Technology: Zirconia
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from ABB Measurement & Analytics
ABB ’s new ACF5000 is the specialist for emission and process monitoring from the pioneers in FTIR CEMS. It is available in the 4th generation. Since introduction in 1993, ABB has sold more than 2000 units. The standard system design combines the advantages of a FTIR spectrometer, flame... [See More]
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Multi
- Mounting Type: Fixed
- Application: Continuous Emissions Monitoring; Process Gas
from Environment One Corporation
E/One's Generator Gas Analyzer (GGA) for hydrogen-cooled generators is a triple-range sensor/analyzer that provides continuous monitoring of gas purity during all phases of generator operation. We've taken a proven monitoring principle — thermal conductivity — and improved upon it. The... [See More]
- Measurement Type: %Volume; Leakage
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Nova Analytical Systems Inc.
The Nova 4230 Process Hydrogen Analyzer has been specifically designed for the accurate measurement of H2 in exothermic or 'DX' gas from a furnace, generator, or other processes with high levels of H2 and CO2. The CO2 acts as an interference to the measurement of Hydrogen when using a thermal... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Process Sensing Technologies USA
The XZR500 oxygen analyzer from Michell Instruments is designed to determine the excess air required for optimum combustion. It uses advanced Zirconium Oxide technology to measure levels of oxygen in harsh conditions such as boilers, incinerators, cremators and furnaces. It provides fast, accurate... [See More]
- Measurement Type: %Volume
- Gas Types: O2 (0.01 - 25% Oxygen)
- Analyzer Technology: Zirconium Oxide Sensor with metallic sealed reference and K Type T/C
- Features: Self Calibration
from Owlstone Inc.
Lonestar is a portable gas analyzer that can detect a broad range of analytes at part per billion concentrations, with high selectivity in just a few seconds. [See More]
- Measurement Type: %Volume; Trace; Signature
- Analyzer Technology: PID
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from COSA Xentaur Corporation
The COSA 707 is a hand held multigas analyzer for industrial and combustion processes. The COSA 707 is an easy to hold, hand-held emissions analyzers capable of measuring up to seven different gases. The emissions analyzer can be equipped with up to 6 electrochemical sensors and a CO2 IR-bench for... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical
- Mounting Type: Handheld; Portable
- Number of Gases Monitored: Multi
from Cubic Sensor and Instrument Co.,Ltd.
High precision automobile emission gas analyzer Gasboard-3000E is based on advanced 00 class emission standards, mainly used for measuring exhaust gases of CO, CO2, HC, O2, NO from petro, gasoline, CNG engines, for car testings lines, garage stations and so on [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Bacharach, Inc.
Measures O2, CO, stack and air temperature for complete combustion analysis. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Compatible with the Bacharach Reporting App. Six fuels available in North American configuration covering most applications like natural gas, oil... [See More]
- Measurement Type: %Volume; Trace
- Gas Types: O2 (0 to 20.9%); CO (0 to 2000 ppm)
- Number of Gases Monitored: Multi
- Display: Digital
from Emerson Automation Solutions – Rosemount
Traditional in situ oxygen flue gas analyzers utilize zirconium oxide sensors to measure excess oxygen in process flue gas. These zirconium oxide sensors use a principle of operation based on the Nernst equation. This principle requires that the sensor cell be maintained at a high operating... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from RKI Instruments, Inc.
Long life light source, no reference gas required, continuous measurement [See More]
- Measurement Type: %LEL or %LFL; %Volume
- Analyzer Technology: Optical Interferometric
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Teledyne Monitor Labs, Inc.
The sensor-e ® NOx uses the proven. chemiluminescence detection principle,. coupled with state-of-the-art. microprocessor technology to provide. the sensitivity, stability and ease. of use needed for ambient or CEM. monitoring requirements. The analyzer uses multi-tasking software. which allows... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Chemiluminescence
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Roscid Technologies
The Model CH-Trans is simple, accurate and. very simple to use in measuring the % levels of hydro carbons. three wire hydrocarbon transmitter. The Model CH-Trans is simple, accurate and very simple to use in measuring the % levels of hydro carbons. One User specific measuring range. The unit offers... [See More]
- Measurement Type: %Volume
- Number of Gases Monitored: Multi
- Analyzer Technology: Infrared
- Application: Process Gas
from Environment One Corporation
Environment One's standard Generator Gas Analyzer (GGA) can also be supplied in a portable configuration. The PGA incorporates the same hydrogen gas sensor/analyzer and system electronics found in our other hydrogen gas purity systems. The PGA is specifically intended for use in non-hazardous... [See More]
- Measurement Type: %Volume; Leakage
- Analyzer Technology: Thermoconductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Nova Analytical Systems Inc.
The Nova 900 Series analyzers have been designed for monitoring recovered and processed gases from landfill and biogas sites. This equipment continuously removes moisture from the wet sample gas without the need for cooling water, compressed air, or failure-prone thermoelectric elements. The 900... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature)
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from COSA Xentaur Corporation
The COSA/Xentaur Continuous Hydrogen Analyzer (CHA), used in countless UOP Schedule A applications for many years, is built under a license to a patented UOP design. It provides petroleum refiners, petrochemical producers, and electric power generators a means to continuously and accurately monitor... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
Automobile emission gas analyzer Gasboard-5020 is a portable type exhaust gas analyzer, mainly used for measuring exhaust gases of CO, CO2, HC, O2, NO from petro, gasoline, CNG engines, with built-in printer, high accuracy, stable performance and easy operation. [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Bacharach, Inc.
Industry-exclusive Tune Rite ® on-demand HVAC “assistant ”. Measures O2, CO (w/NOx filter), stack/air temperature and draft/pressure. Exclusive B-Smart ® pre-calibrated CO sensor for easy field replacement. Standard 3 year O2 sensor. Compatible with the Bacharach Reporting App... [See More]
- Measurement Type: %Volume; Trace
- Gas Types: O2 (20.9%); CO (0 to 4,000 ppm)
- Number of Gases Monitored: Multi
- Display: Digital
from Emerson Automation Solutions – Rosemount
Rosemount Analytical is the leader in oxygen flue gas analyzer technology. The 6888 continues the tradition of integrating an oxygen probe and field electronics into a single, compact package. The probe inserts directly into a flue gas duct to measure oxygen in combustion processes. No sampling... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Roscid Technologies
The Model O2Tracer-M is simple to use, accurate and very economical. Features. Oxygen Transmitter with a display. 4 – 20 mA Loop Powered two wire. Two Wire Process Oxygen analyzer. Calibration : performed at Ambient O2. Accuracy : +/- 2% FSD T= const. +/- 5% FSD 0 >T >50 °C. Response... [See More]
- Measurement Type: %Volume
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Application: Process Gas
from Nova Analytical Systems Inc.
The Nova 8000 series has been designed for the continuous monitoring of pre-cleaned gases from a blast furnace or other high intensity, continuous industrial processes. The analyzer measures up to four gases simultaneously - O2, CO, CO2, and H2, the ranges of which are shown below. From these... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical (optional feature); Infrared (optional feature); Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
Handheld biogas analyzer Gasboard-3200Plus is handheld type analyzer, mainly used for measuring biogas compositions of CH4, CO2, O2, H2S and optional H2, CO gases, with high accuracy, stable performance and easy carrying features, widely used in anaerobic digestion biogas, waste water treatment... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Handheld; Portable
- Number of Gases Monitored: Multi
from Bacharach, Inc.
Measures up to 7 gases simultaneously (minimum O2 and CO), including NOx, SOx and combustibles. Sensors are easily replaced or upgraded in the field. Rugged suitcase design with large, easy-to-read display. Built-in printer for instant traceability and record-keeping. The ECA 450 is an industrial... [See More]
- Measurement Type: %Volume; Trace
- Gas Types: NO (0 to 3500 ppm, 0 to 14900 ppm); NO2 (0 to 500 ppm, 0 to 2100 ppm); NxOx (0 to 4000 ppm, 0 to 17000 ppm); SO2 (0 to 4000 ppm); CO2 (0 to Fuel Dependent Maximum); CO (0 to 4000 ppm (Hydrogen Compensated), 4001 to 80000 ppm, 0 to 99999 ppm)
- Number of Gases Monitored: Multi
- Display: Digital
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Roscid Technologies
4 – 20 mA Loop Powered two wire Oxygen Transmitter. Two Wire Process Oxygen analyzer. The Model OxyTrans LC is simple, accurate and economic measurement of Oxygen at trace (ppm) levels and % levels. Four User Specific Measuring Range Offered. The OxyTrans LC is offered in 4 different measuring... [See More]
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Application: Process Gas
from Nova Analytical Systems Inc.
The Nova 350 Series Portable Flue Gas Analyzer has been designed for accuracy, reliability, ease of use and ease of service. It uses customer replaceable sensors which respond quickly to the Oxygen (O2) and combustibles present in the flue gas sample. The sensor life expectancy is between 2 and 3... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Catalytic; Electrochemical
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Cubic Sensor and Instrument Co.,Ltd.
Combustion analyzers are available for HVAC, boiler, industrial and flue gas monitoring applications. A wide range of units is available, with most offering CO2, CO, O2 with advanced NDIR and long life time ECD technology. A new portable type in reliable and accurate combustion analysis with its... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Bacharach, Inc.
Complete kit for measuring all attributes of combustion. The Bacharach Mechanical Oil/Gas Testing Kits are complete kits that have HVAC technicians and contractors in mind. They include everything needed to perform a comprehensive combustion test, including the Fyrite ® Classic (0-20% CO2), MZF... [See More]
- Measurement Type: %Volume
- Gas Types: O2 (0-60%); CO2 (0-60%)
- Number of Gases Monitored: Multi
- Display: Analog
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Roscid Technologies
The Model O2Tracer is simple, accurate and very economic measurement of Oxygen at % levels. One User specific measuring range. the unit will offer with different ranges between 0 – 100% of oxygen. Typical range is 0- 25%. Sensor. The O2Tracer uses a special fuel cell to measure the oxygen... [See More]
- Measurement Type: %Volume
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Application: Process Gas
from Nova Analytical Systems Inc.
The Nova 350 Series Portable Flue Gas Analyzer has been designed for accuracy, reliability, ease of use and ease of service. It uses customer replaceable sensors which respond quickly to the Oxygen (O2) and combustibles present in the flue gas sample. The sensor life expectancy is between 2 and 3... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Catalytic; Electrochemical
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Cubic Sensor and Instrument Co.,Ltd.
Online flue gas analyzer Gasboard-3000UV is designed with advanced UV DOAS technology for ultra-low SO2,NO,O2 measurement, this model is an ideal solution with CE certification for pollution emission monitoring in boiler, power, cement, incinerator, furnace, steel and other industrial applications. [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical; UV DOAS
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Bacharach, Inc.
Measure O2 and CO2 simply, accurately and quickly. Multiple ranges available for use in a wide variety of applications. Field-replaceable, easy-to-change fluid for keeping the instrument in the field. The Fyrite ® Classic is a tried-and-true instrument for measuring oxygen and carbon dioxide. [See More]
- Measurement Type: %Volume
- Gas Types: O2 (0-60%); CO2 (0-60%)
- Number of Gases Monitored: Multi
- Operating Temperature: -30 to 150
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Roscid Technologies
Two Wire Process Oxygen Analyser. The Model OxyTrans is simple, accurate and an economical way to measure traces and % ranges of Oxygen. The unit has a simple display and offers a one point calibration allowing for a quick start up. optional 1/2 G Ex ia IIC T4 (ATEX). Specific Measuring Range. There... [See More]
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Application: Process Gas
from Nova Analytical Systems Inc.
The Nova Model 7900P Series Heat Treat analyzers utilize a three channel high stability infrared detector for the simultaneous measurement of CO, CO2, and CH4 in exothermic or endothermic gas mixtures. In addition, the analyzer can be supplied with a fully compensated thermal conductivity cell for... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Portable
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
Analyzers for professionals. Excellent portable flue gas analyzer for analyzing various measuring variables like SO2,NO,CO,CO2,O2 based on unique micro-flow NDIR and long life time technology. Cubic-Ruiyi is a leader in the field of portable, stationary measurement solutions. Stable performance and... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Portable
- Number of Gases Monitored: Multi
from Bacharach, Inc.
4.3 inch color touch screen with enhanced viewing options to easily see readings. Bluetooth ® wireless technology allows for live streaming of data to any phone, PC or tablet. Rugged all-in-one probe connection for durability and easy setup. Optional NOx and SO2 sensors with Viton probe tubing... [See More]
- Measurement Type: %Volume; Trace
- Gas Types: NO (0 to 3,000 ppm); NO2 (0 to 500 ppm); O2 (0 to 20.9%); SO2 (0 to 5,000 ppm); CO (0 to 40,000 ppm)
- Number of Gases Monitored: Multi
- Display: Digital
from Emerson Automation Solutions – Rosemount
Rosemount Analytical ’s MLT, CLD and FID series of analyzers offer MLT with multi-component, multi-method analysis utilizing non-dispersive infrared, visible, ultraviolet (NDIR/UV/VIS), thermal conductivity (TCD), paramagnetic, and electrochemical sensor technologies (pO2/eO2), trace oxygen... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical; Infrared; PID; Paramagnetic, Thermal Conductivity
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Roscid Technologies
The Model OxyTrans is simple, accurate and Economic measurement of Oxygen at trace and % levels. A simple Display and one point calibration allow easy and fast start-up of the instrument. Features. Measuring ranges. ppm: 0-10, 0 – 100; 0 – 1000;. : 0 – 10000 ppm O2. : 0 – 25;... [See More]
- Measurement Type: %Volume; Trace
- Number of Gases Monitored: Single
- Analyzer Technology: Electrochemical
- Application: Process Gas
from Nova Analytical Systems Inc.
The Nova 430DPL analyzer utilizes a temperature-controlled T/C cell for the detection of H2 in process gas. This cell produces a small millivoltage output which is directly proportional to the H2 detected. This output is then amplified and displayed on a digital readout meter and is also available... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
Laser raman gas analyze?r LRGA-6000 is an advanced equipment that can online measure all the gas composition of most fuel gases, including biogas, syngas, natural gas, producer gas and so on. And with the unique advantages of no consumables, higher accuracy, long lifetime, and no routine calibration... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Laser Raman
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Emerson Automation Solutions – Rosemount
The OCX 8800 with its rugged design, stable sensor, electronics and software package, is the most dependable oxygen/combustibles transmitter on the market. The time-tested and world renowned zirconium oxide sensor is the basis for the oxygen measurement. This, coupled with the new combustibles... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Roscid Technologies
OxyP- This Model was made for fast, accurate and economic measurement of Oxygen at trace or percent levels. A simple operating and a large LCD-display allow easy and fast start-up of the instrument. The Unit is measuring Oxygen between 0 – 10000 ppm or 0 -25%. Specification. Measuring range :... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Electrochemical
- Mounting Type: Portable
- Number of Gases Monitored: Single
from Nova Analytical Systems Inc.
The Nova 430DPL analyzer utilizes a temperature-controlled T/C cell for the detection of H2 in process gas. This cell produces a small millivoltage output which is directly proportional to the H2 detected. This output is then amplified and displayed on a digital readout meter and is also available... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
Online syngas analyzer Gasboard-3100 is a stationary analyzer with standard 19'' 3U rack enclosure, easy to be integrated inside industrial system. It is able to online continuously measure volume concentration of CO, CO2, CH4, H2 , O2 , CnHm, C2H2 , C2H4 simultaneously, and calculate gas heating... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical; Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Emerson Automation Solutions – Rosemount
Emerson is the leader in oxygen flue gas analyzer technology. Our Hagan in situ, zirconium oxide oxygen analyzers have long been established as industry standards. We've combined our Hagan expertise with the latest Rosemount Analytical transmitter technology to create a truly revolutionary package;... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Zirconium Oxide Sensing Element
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Roscid Technologies
The Model O2 Tracer-R is simple, accurate and very economic measurement of Oxygen at a % levels. Features. Measuring range: all ranges between : 0-25% O2. Calibration: with calibration gas( ppm) or air. Accuracy: +/- 2% FS . Response time: 90 % FS at 25 °C. Operating Temperature: 0 – 50C. [See More]
- Measurement Type: %Volume
- Analyzer Technology: Electrochemical
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Nova Analytical Systems Inc.
The Nova 430DPL analyzer utilizes a temperature-controlled T/C cell for the detection of H2 in process gas. This cell produces a small millivoltage output which is directly proportional to the H2 detected. This output is then amplified and displayed on a digital readout meter and is also available... [See More]
- Measurement Type: %Volume
- Analyzer Technology: Thermal Conductivity Cell
- Mounting Type: Fixed
- Number of Gases Monitored: Single
from Cubic Sensor and Instrument Co.,Ltd.
NDIR gas bench Gasboard-2000 is based on NDIR technology for measuring CO, CO2, HC gases, which are exhausted from petro, gasoline, CNG engines, with high accuracy, easy integration and developing on emission gas analyzer [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Multi
from Emerson Automation Solutions – Rosemount
This multi-component QCL represents the next generation of gas analyzers and sensors, with the ability to measure up to 20 gases and an interchangeable modular configuration for up to 9 lasers. An embedded ARM processor gives fully autonomous intelligent operation. Key Features/Benefits: Measure up... [See More]
- Measurement Type: %Volume; Trace
- Analyzer Technology: Infrared
- Mounting Type: Fixed
- Number of Gases Monitored: Multi