Epoxy Sealers and Seal Coatings
from Aervoe Industries Incorporated
Tough coating, protects & insulates exposed wires & electrical windings [See More]
- Coating Material: Epoxy; Resin; Solvent
- Substrate: Other; Coils, Windings, Insulation, Bus Bars; Metallic
- Cure / Setting Technology: Film Drying
- Coverage: 17 to 34
from Rust-Oleum Corporation
Heavy duty static control floor topping, 3 component epoxy resin polymer [See More]
- Coating Material: Epoxy; Resin
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Form: Liquid
from Sherwin-Williams Protective & Marine Coatings
ArmorSeal ®33 EPOXY PRIMER/SEALER is a low viscosity, 100% solids, high build, fast cure, epoxy primer designed for use under ArmorSeal ®650 or where a high build primer is needed. This primer/sealer enhances adhesion by penetrating into the concrete substrate and helps reduce bubbling and... [See More]
- Coating Material: Epoxy; Resin
- Substrate: Wood; Concrete
- Cure / Setting Technology: Multicomponent
- Thickness: 0.0080
from Rust-Oleum Corporation
Clear, unpigmented, two component, zero VOC waterborne epoxy primer. [See More]
- Coating Material: Epoxy; Resin
- Substrate: Concrete
- Cure / Setting Technology: Multicomponent
- Coverage: 200
from Sherwin-Williams Protective & Marine Coatings
The movement to produce, liquefy, store and transfer natural gas at sea brings to the forefront a new concern in the risk assessment stages of any floating liquefied natural gas (FLNG) project: how to protect the vessel and support structures from the catastrophic effects of a cryogenic LNG spill on... [See More]
- Coating Material: Epoxy; Resin
- Substrate: Metallic
- Cure / Setting Technology: Film Drying
- Thickness: 0.3937
from Sherwin-Williams Protective & Marine Coatings
KEM ® Cati-Coat ® HS EPOXY FILLER/SEALER is a high performance, interior/exterior, VOC compliant, epoxy block filler. Designed for tenacious adhesion to masonry substrates while filling voids and crevices to smooth the surface. Excellent resistance to moisture, humidity, impact, and... [See More]
- Coating Material: Epoxy; Resin
- Substrate: Concrete
- Cure / Setting Technology: Film Drying
- Thickness: 0.0140 to 0.0280