Thermoset Sealers and Seal Coatings
from CHEMEON Surface Technology, LLC
CHEMEON ® Seal 6000 - Additive for hot deionized water seal. Wetting agents and dispersants prevent smut and accelerate seal. Parts sealed in CHEMEON Seal 6000 may be painted, bonded, or welded with excellent results. Use at 0.1-0.5% v/v with a pH of 6.2 to 7.0 and temperature of 195 °F to... [See More]
- Cure / Setting Technology: Thermoset
- Coating Material: Metal Filled; -2146826273
- Substrate: Metallic; Aluminum; Anodized
- Cure Temperature: 195 to 205
from Houghton International, Inc.
Houghto-Seal ™ A-617 is cold seal designed to seal aluminum anodized parts at 90 °F. Parts sealed in Houghto-Seal A-617 will pass the Dye Stain Test immediately after drying, pass the Modified Dye Stain Test six hours after, pass the Acid Dissolution Test 24 hours after, and be fully cured... [See More]
- Cure / Setting Technology: Thermoset
- Cure Temperature: 90
- Substrate: Aluminum; Anodized
- Industry: OEM / Industrial
from Sherwin-Williams Protective & Marine Coatings
Macropoxy ® 920 PRE-PRIME is a 100% solids, VOC compliant, penetrating epoxy primer designed for use over marginally prepared steel or concrete surfaces. A penetrating sealer for tight rusted surfaces. A penetrating sealer for concrete and masonry surfaces. Low viscosity. Low VOC. Barrier coat... [See More]
- Cure / Setting Technology: Thermoset
- Coating Material: Epoxy; Resin
- Substrate: Steel; Other; Iron, Previously Painted Surfaces; Concrete
- Thickness: 0.0015 to 0.0020