Weather / UV Resistant Sealers and Seal Coatings
from Sherwin-Williams Protective & Marine Coatings
GENERAL POLYMERS 3460 AquArmor ™ WBE is a unique, high solids water-based epoxy used as a primer, binder resin, and/or topcoat for the AquArmor ™ floor systems and as a concrete sealer. RECOMMENDED USAGE. Binder resin for the AquArmor ™ systems and as a concrete sealer [See More]
- Features: Chemical Resistant; Weather Resistant; Can Be Applied To Green Concrete
- Substrate: Wood; Concrete
- Cure / Setting Technology: Multicomponent
- Coating Material: Epoxy; Resin; Water
from Columbia Chemical Corporation
Lac-Chro-SEAL ® is a non-hazardous lacquer coating for enhanced corrosion resistance on electroplated deposits and base metals. It air dries quickly to a very thin, clear & glossy finish which prevents fingerprints and provides significant protection to high humidity conditions. [See More]
- Features: Corrosion Resistant; Protective; Weather Resistant
- Substrate: Other; Zinc & Zinc Alloy Deposits Over Steel; Metallic
- Cure / Setting Technology: Film Drying
- Coating Material: Acrylic; Zinc; Water
from Columbia Chemical Corporation
Zinc-Chro-SHIELD ® is a unique sealer for chromated zinc deposits which dramatically increases corrosion protection at very little additional cost. And since it's added to the final stagnant rinse at low concentrations (1% to 8% by volume), no additional equipment is required. Zinc-Chro-SHIELD... [See More]
- Features: Corrosion Resistant; Protective; Weather Resistant
- Substrate: Steel; Other; Zinc & Zinc Alloy Deposits Over Steel
- Cure / Setting Technology: Film Drying
- Coating Material: Zinc; Water; Silicate Based