Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Accuris
Description: HF Data Link System Design Guidance Material
-
Supplier: Quarktwin Technology Ltd.
Description: RF EMI Absorbing Sheet AB7000HF Polymer Resin, Metal Flakes Non-Conductive, Single Sided 8.268" (210.00mm) X 11.693" (297.00mm) X 0.010" (0.25mm)
-
Supplier: Indium Corporation
Description: efficient. NC-10HF is a halide-free, no-clean formulation that can be used on any substrate surface and coated onto any solder material.
- Fluxes & Cleaners: Soldering Flux / Rosin
-
-
Supplier: DigiKey
Description: "RF EMI Absorbing Tape AB5100HF Polymer Resin, Metal Flakes Non-Conductive, Single Sided 8.268"" (210.00mm) X 32.810' (10.00m) X 0.039"" (1.00mm)"
-
Supplier: Indium Corporation
Description: Indium8.9HF Pb-Free Solder Paste is Halogen-Free per EN14582 test method. Eliminates hot and cold slump, high oxidation resistance, wets well to oxidized BGA and pad surface. Indium8.9HF has a high transfer efficiency through small apertures, has an excellent soldering performance under high
- Solder Alloy: Lead Free
- Joining Process / Product Form: Paste
-
Supplier: Umicore Metal Deposition Solutions
Description: Specifications Material Type Metals Material Hf Purity 3N7
- Purity: 99.97 %
- Material: Metal
- Features: Specialty / Other
- Type: Sputtering Target
-
Supplier: Umicore Materials
Description: Specifications Material Type Metals Material Hf Purity 3N7
-
Industrial Adhesives - Tia208R-Hf/p_Pl Kit/88.2Lb-40Kg_N Momentive Performance Materials -- 26AK5959Supplier: Newark, An Avnet Company
Description: TIA208R-HF/P_PL KIT/88.2LB-40KG_N
-
Supplier: RFID, Inc.
Description: When backed with a ferrous material, just about any HF Tag can be metal mountable, but here is a sampling of a few specifically designed with either the ferrous backing or in a package that provides for adequate spacing.
- Frequency: 13,560,000 Hz
- Operating Temperature: -40 to 85 C
- Technology: Passive
-
Supplier: MacDermid Alpha Electronics Solutions
Description: Low-etch alternative oxide provides low surface profiles and reliable adhesion for high frequency applications. Product Overview M-Speed HF is a low-etch oxide alternative that improves signal integrity for high-speed innerlayers. The unique low-etch process provides a low-profile surface
- Industry: Electronics, Semiconductors / IC Packaging
- Features: Thermal / Heat Conductive
-
Supplier: Trelleborg Sealing Solutions Americas
Description: The Turcon® Variseal® HF is a single acting sealing element optimized for sealing high-pressure fluid and gas. The high spring load of the helical spring ensures effective sealing even in extremely low temperature applications. These helical spring seals are ideal for slow moving and static
- Shaft O.D. or Seal I.D.: 0.1181103 to 129.92133 inch
- Maximum Operating Pressure: 8,702.21036143182 psi
- Features: Other
-
Supplier: Win Source Electronics
Description: 6GHz Housing Color: Gold Number of Ports: 1 Impedance: 50Ohm Body Material: Phosphor Bronze Insertion Loss: 0.15dB Shield Termination: Solder Body Finish: Gold Center Contact Material: Beryllium Copper Center Contact Plating: Gold Dielectric Material: Polyamide (PA), Nylon 6T
- Frequency Range: 6 GHz
- Features: Coaxial Connector
-
Supplier: RFID, Inc.
Description: When backed with a ferrous material, just about any HF Tag can be metal mountable, but here is a sampling of a few specifically designed with either the ferrous backing or in a package that provides for adequate spacing.
- Frequency: 13,560,000 Hz
- Operating Temperature: -40 to 85 C
- Technology: Passive
-
Supplier: Win Source Electronics
Description: Manufacturer: TDK Corporation Win Source Part Number: 873507-HF30ACC321611-TD25 Series: HF-ACC Operating Temperature Range: -40°C ~ 125°C Features: Signal Line Ferrite Bead 1206 (3216 Metric) 1.5A 40mOhm Package: Reel - TR Package: 1206 (3216 Metric) Mounting: Surface Mount Part Status: Not
-
Supplier: Win Source Electronics
Description: Manufacturer: TE Connectivity Raychem Cable Protection Win Source Part Number: 771487-HF-17FRX4 Series: HF-FR Type: Tubing, Flexible Color: Black Operating Temperature Range: -55°C ~ 90°C Features: Flame Retardant, Fluid Resistant Length: 4.00' (1.22m) Material: Polyolefin (PO)
-
Supplier: Utmel Electronic Limited
Description: 1.25mm Wire to Board Connector(JST GH) Header,LCP Material,10P
- Current Rating: 1 amps
- Features: Header Connector
- Connector Type: Wire-to-Board Connector
-
Supplier: Materion Corporation
Description: Aluminum Oxide, Al2O3 Antimony Oxide, Sb2O3 Barium Oxide, BaO Barium Titanate, BaTiO3 Bismuth Oxide, Bi2O3 Bismuth Titanate, Bi4Ti3O12 Ba Sr Titanate, BST Chromium Oxide, Cr2O3 Copper Oxide, CuO Hafnium Oxide, HfO2 Indium Oxide, In2O3 Indium Tin Oxide, ITO Lanthanum Aluminate, LaAlO3 Lanthanum
- Type: CVD / Chemical Precursor
- Material: Oxides
-
Supplier: Utmel Electronic Limited
Description: 1.25mm wire to board connector(JST GH) header,LCP material,14P
- Current Rating: 1 amps
- Features: Header Connector
- Connector Type: Wire-to-Board Connector
-
Supplier: Henkel Corporation - Electronics
Description: LOCTITE HF 212 Applications Solder Paste for Medium and Large Board Assemblies LOCTITE HF 212 is a halogen-free solder paste that withstands the thermal demands inherent with larger assemblies. High reliability and a wide reflow process window are at the foundation of this
-
Supplier: Eastman Chemical Company
Description: resistance. Eastman Tritan™ copolyester TX1500HF may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Eastman Tritan™ copolyester TX1500HF is certified to NSF/ANSI Standard 51 for Food and Equipment Materials.
- Deflection Temperature (@ 264 psi, 1.8 MPa): 177.8 F
- Tensile Strength (Break): 7,541.91564657424 psi
- Elongation: 7 %
- Chemical System: Polyester (PET, PBT)
-
Supplier: Electro Optical Components, Inc.
Description: SemeaTech, a world leader in sensing technologies, offers a full line of electrochemical sensors for detecting hazardous materials and gases for work safety and environmental protection. SemeaTech has built a wide network of industry experts and technologists to provide the company with
- Features: Hazardous Environments
- Gas Types: Hydrogen Fluoride (HF)
- Number of Gases Monitored: Single Gas
- Measurement Type: Trace
-
Supplier: Morgan Advanced Materials
Description: A very high purity zirconia-based material, partially stabilised with yttria, produced specifically for surgical implant devices. Contains 99.9 % ZrO2, Y2O3 and HfO2 in combination.
- Thermal Conductivity: 2.9 W/m-K
- MOR / Flexural Strength: 88,472.47200789017 to 174,044.2072286364 psi
- Modulus of Elasticity: 31,908,104.65858334 psi
- Density: 0.0000000060692221439097844 g/cc
-
Supplier: Win Source Electronics
Description: (SMT) Impedance: 50 Ohm Body Material: Phosphor Bronze Insertion Loss: 0.15dB Shield Termination: Solder Body Finish: Gold Center Contact Material: Beryllium Copper Center Contact Plating: Gold Dielectric Material: Polyamide (PA), Nylon 6T Mating Cycles: 100 Categories:
- Frequency Range: 6 GHz
- Features: Coaxial Connector
-
Supplier: Monroe Engineering
Description: Material-Steel
- Bore Diameter: 0.3125 inches
- Handle Type: Lever Handle
- Handle Material: Metal
- Mounting Type: Stud
-
Supplier: FluoroSeal, Inc.
Description: valve market, FluoroSeal® HF Alkylation Plug Valves ensure that your alkylation process stays in your process lines. FluoroSeal® HF Alkylation Valves are designed and manufactured in strict compliance with the requirements of the HF Alkylation’s Process Licensor specifications.
- Valve Type: Plug Valves
- Media: Water
-
Supplier: MAXPRO Technologies, Inc.
Description: MAXIMATOR couplings are female to female fittings that allow the joining of two different sizes and/or types of connections for a variety of size combinations. All couplings and adapters are made of 316 cold worked stainless steel material; other materials are available upon request.
- English Size: 0.375 inch
- Fitting Type: Coupling
- Features: English
- Material: Stainless Steel
-
Supplier: Hiab, Inc.
Description: M50 High Floatation is commonly used for delivering building material, such as Plaster board, Brick & Block and Timber. High speed, lifting capacity of 5000 lbs and ability in rough terrain deliver the material from the truck to where the work is done, makes this a perfect portable
- Capacity: 5,000 lbs
- Stroke: 109 inch
- Width: 101 inch
- Type: Forklift
-
Supplier: PHOENIX CONTACT USA
Description: Insert label with integrated RFID-HF transponder, matt, white, unmarked, can be printed with: BLUEMARK CLED, mounting type: adhesive, lettering field size: 110 x 38 mm
- Width: 3.543307086614173 inches
- Length: 0.12467198333333333 ft
- Features: Specialty / Other
-
Supplier: PHOENIX CONTACT USA
Description: Insert label with integrated RFID-HF transponder, matt, white, unmarked, can be printed with: BLUEMARK CLED, mounting type: snapped into marker carrier, lettering field size: 110 x 38 mm
- Width: 3.543307086614173 inches
- Length: 0.12467198333333333 ft
- Features: Specialty / Other
-
Supplier: PHOENIX CONTACT USA
Description: Plastic label with integrated RFID-HF transponder, matt, white, unmarked, can be printed with: BLUEMARK CLED, mounting type: adhesive, lettering field size: 110 x 38 mm
- Width: 4.330708661417323 inches
- Length: 0.12467198333333333 ft
- Materials of Construction: Plastic / Film
- Features: Specialty / Other
-
Supplier: Utmel Electronic Limited
Description: 1.50mm Wire to Board Connector (Molex 87438) Header, LCP Material, Matte Tin, 09P
- Current Rating: 3 amps
- Features: Header Connector
- Connector Type: Wire-to-Board Connector
-
Supplier: Norplex-Micarta
Description: NP130HF (NEMA FR-4) is a glass fabric epoxy composite that is a lower resin content version of NP130. NP130HF is engineered to provide higher flexural strength, higher flexural modulus (stiffness), and resistance to warp and twist than other NEMA Grade FR-4 products. The product is also more
- Temperature Resistance: 130 to 140 C
- Materials: Cloth / Fabric (Woven), Glass / Fiberglass
-
Supplier: Magnetics
Description: Kool Mµ® Hƒ Cores Lowest Losses for High Frequencies Kool Mµ® Hƒ powder cores are made from distributed gap alloy powder optimized for frequencies 200-500 kHz. Exhibiting approximately 35% lower losses when compared to Kool Mµ, Kool Mµ Hƒ is a cost-effective solution for minimizing power losses in
- Inductance: 14.999999999999998 nH
- Length: 41.2 mm
- Width: 7.11 mm
- Diameter: 17.270000000000003 mm
-
Supplier: Eastman Chemical Company
Description: Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org.
- Deflection Temperature (@ 264 psi, 1.8 MPa): 152.6 F
- Tensile Strength (Break): 5,511.39989557349 psi
- Elongation: 5 %
- Chemical System: Polyester (PET, PBT)
-
Supplier: Henkel Corporation - Industrial
Description: When cured, this material provides excellent mechanical and moisture resistant properties for protection of electronic components Halogen-free One component for easy processing Fast cure at moderate temperatures Good adhesion to a variety of substrates Stable electrical performance in
- Coeff. of Thermal Expansion (CTE): 33.55555555555556 µin/in-F
- Viscosity: 3,300 cP
- Chemical System: Epoxy (EP)
Find Suppliers by Category Top
Featured Products Top
-
production. Designed for wide product ranges and high-performance materials, Thermatool’s XPERT™ High Frequency Welder delivers unmatched reliability, minimal scrap, and precise weld heat input control across any grade of steel. Its lightweight, modular HF power design and patented (read more)
Browse Welding, Brazing, and Soldering Equipment Datasheets for Inductotherm Group -
frequency of filter replacements, saving time and maintenance costs in the long run. Durable Construction Robust Materials : High flow pleated filter cartridges are constructed with durability in mind. The materials used in their construction are carefully (read more)
Browse Filter Elements Datasheets for Harbory Filtration -
from entering the work area and contaminating samples. Clean benches do not protect users from exposure and should never be used when working with any infectious material or volatile/toxic chemicals. The EdgeGARD® e3 HF Horizontal Laminar-Flow Clean Bench provides ISO Class 5 cleanliness (read more)
Browse Clean Benches Datasheets for Baker -
work area and contaminating samples. Clean benches do not protect users from exposure and should never be used when working with any infectious material or volatile/toxic chemicals. The EdgeGARD® e3 HF Horizontal Laminar-Flow Clean Bench provides ISO Class 5 cleanliness (for .05 micrometer (read more)
Browse Clean Benches Datasheets for Baker -
INOCART HF COMPLETE POWDER PACKAGE The Inocart HF is a simple and complete manual solution for applying thermoplastic and anti-corrosion powders. Using the Inogun M spray gun and the Inobox control module, it enhances the user's experience with a (read more)
Browse Powder Coating Equipment Datasheets for Sames North American Corporation -
Si3N4 Silicon Nitride Ceramic Guide Roll For HF Tube And Pipe Welding The electric resistance welding (ERW) is used to fabricate steel pipes and tubes. Silicon Nitride Ceramic is typically used to make welding guide rolls for the high frequency ERW in continuous steel tube (read more)
Browse Ceramic Tube and Ceramic Rod Products Datasheets for Xiamen Unipretec Ceramic Technology Co., Ltd. -
JR1000 Series Single Stage Regulator Low to intermediate flow Features ? Body material: SS 316L, SS 316L VAR. ? Metal to metal diaphragm sealing (read more)
Browse Control Valves Datasheets for Shenzhen Jewellok Technology Co., Ltd. -
innermost edge of the spring across its narrowest point. The ID is typically smaller than the OD by twice the material thickness. 3. Free Height (Hf) (read more)
Browse Compression Springs Datasheets for Zhejiang Lisheng Spring Co., Ltd. -
, style can be FH,HF,VF.HVF VFM/VFU Material: Material of the flange parts is indicated in each single article, normally C45 is used for non-welding flange parts and fitings, and Q345B or C20 is used for welding flange parts, For stainless steel (read more)
Browse CNC Machining Services Datasheets for Running Industry Co., Ltd -
Military Ground Vehicles With three levels of effectiveness to choose from, Shield-Flex can meet your needs. All versions can be manufactured with halogen-free jacketing material, using a HF prefix. · Good Shielding: Type (read more)
Browse Electrical Conduit Datasheets for Electri-Flex Company
Conduct Research Top
-
Study Crowns HF the Item-Level King
, says Odin president and CEO Patrick J. Sweeney II. HF won five of the eight tests that were conducted, while UHF fared better in two and one was a draw, he says. The most important category tested may be material dependence, since manufacturers must guarantee high read rates for RFID
-
Pedigree Tags Need HF; FDA Agrees
have a greater ability to penetrate obscuring materials and are less affected by the presence of liquids and moisture. This is simply because the radio waves are longer and small fluctuations result in less distortion. Admittedly, no RF system is immune to the effects of liquids and metals. Each
-
Can Packaging Materials Foil RFID Success?
By Paul Thomas, Managing Editor If there s anything that s well understood about how drug packaging materials impact the success of RFID applications, it is that nothing is well understood. Some materials, such as metal foils, can compromise signal strength and significantly reduce the read-rate
-
Innovative Seal for Anodized Aluminum Eliminates Hexavalent Chrome Emissions
CHEMEON TCP-HF Provides Safe Alternative to Carcinogenic Materials Used on Naval Aircraft
-
Filtration Performance of Permanently Hydrophilized Polyethylene Membranes
Lydall Performance Materials B.V. recently developed an innovative membrane platform based on Ultra High Molecular Weight Polyethylene (UHMwPE), a chemically inert and highly durable polymer. The new generation of UHMwPE membranes include Solupor (R) HF membranes and Arioso (R) high performance air
-
Case Study No.2: Metal Processing
Considering the installation of a treatment device for hydrogen fluoride gas (HF gas) discharged in the Atmospheric Plasma Spraying (APS) process. Due to the characteristics of the discharged gas, both scrubber and blower need to use corrosion resistant materials. The final concentration
-
Pfizer Learns by Doing with RFID
early insight into how readability and read rates are affected by packaging and product and also how to compensate in some cases. You re using HF tags for the pilot. Was the fact that HF is thought to work better with a wider variety of packaging materials a major consideration in this choice? Did
-
Capacitives with Perspective
Unlike inductive proximity switches, which respond exclusively to metals, capacitive sensors react to a wide spectrum of other materials, such as for example: paper, glass, plastics, oil, water, as well as all metals. The sensor output switches when the object to be detected is within a certain
More Information Top
-
Nanoscale characterization of the dielectric charging phenomenon in PECVD silicon
nitride thin films with various interfacial structures based on Kelvin probe ...
…the stored charge was found to increase almost linearly with increased film thickness for LF SiNx material while there was no clear effect of the dielectric film thickness on the stored charge in the case of HF material (Daigler et al 2009…
-
Measurements and Performance Factor Comparisons of Magnetic Materials at High Frequency
From this example we see that operating at frequencies best suited to a given magnetic material can offer significant 2015 Energy Conversion Congress and Exposition, Sept. 2015 (to appear) TABLE II: Steinmetz parameters for commercially available HF materials , valid for Pv(mW/cm3…
-
Polymeric hollow fiber membranes for bioartificial organs and tissue engineering applications
Other non-degradable materials employed less often for BAO are poly(vinylidene difluoride) (PVDF),92 polycarbonate (PC)93 or for cellular therapies using patented HF materials like Polyflux consisting of a blend of polyarylethersulfone, polyvinylpyrrolidone and polyamide.94 All these materials could…
-
CRANFIELD UNIVERSITY
Experimental study of operation of an MBR to treat municipal wastewater based on a new HF material has revealed that studies based on aeration step provide a more realistic indication of critical operation than classical flux step experiments, since the latter involve…
-
Surface Energy of Sol Gel‐Derived Silicon Oxycarbide Glasses
From the ordi- nate in the V–t plot, the micropore volume of the T- HF material has been calculated and collected in Table V.
-
Periodic cluster Anderson model: Kondo, Intermediate Valence, and Heavy fermion of system
There ar examples of metals with e.g. dilute Ce impurities whose specific heat per impurity is AS large AS that of the HF of material .
-
Tc for heavy Fermion superconductors linked with other physical
properties at zero and applied pressure
Here, a further physical property, the dc electrical conductivity σ(Tc), is one focal point, another being the pressure dependence of both Tc and σ(Tc) for several HF materials .
-
Heavy Fermion Superconductivity
interesting to note that the original question posed above for the discovery of CeCu2Si2, namely the coexistence of magnetism and superconductivity in HF materials , remains a central challenge for the .
Indicates content that may require registration and/or purchase.