Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Description: This test is conducted to determine the resistance of solid state devices to corrosion. It is an accelerated test that simulates the effects of severe sea-coast atmosphere on all exposed surfaces.
-
Description: Corrosion tests in artificial atmospheres -- Salt spray tests
-
Description: IEC 60749-13:2018 describes a salt atmosphere test that determines the resistance of semiconductor devices to corrosion. It is an accelerated test that simulates the effects of severe sea-coast atmosphere on all exposed surfaces. It is only applicable to those
-
-
Description: Describes a salt atmosphere test that determines the resistance of semiconductor devices to corrosion. It is an accelerated test that simulates the effects of severe sea-coast atmosphere on all exposed surfaces. It is only applicable to those devices specified for
-
Description: Corrosion of metals and alloys -- Corrosion tests in artificial atmosphere -- Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
-
Supplier: System of Systems, Inc.
Description: Salt Fog Testing Salt is one of the most pervasive naturally occurring chemical compounds. Corrosion, electrical, and physical effects on materials commonly occur when exposed to this type of corrosive atmosphere. This method of testing provides a quick evaluation
- Configuration: Walk-In
-
Supplier: Accuris
Description: CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS
-
Supplier: Haida International Equipment Co., Ltd.
Description: products Test Ka" GB / T10125-1997 Corrosion tests in artificial atmospheres - salt spray test _ GB / T10587-2006 salt spray test chamber Technical conditions GB10593.2-1990 electric and electronic products environmental parameters measurements GB /
- Configuration: Floor Mount
- Test Parameters: Temperature, Corrosion (Salt Fog / Immersion)
-
Description: Modification of the validity date: now put at 2007.
-
Description: ISO 21207:2004 defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing
-
Supplier: Accuris
Description: Italian Language - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS
-
Supplier: Accuris
Description: Chinese Language - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS
-
Supplier: Accuris
Description: French Language - CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - SALT SPRAY TESTS
-
Supplier: CSA Group
Description: IEC 60749-13:2018 describes a salt atmosphere test that determines the resistance of semiconductor devices to corrosion. It is an accelerated test that simulates the effects of severe sea-coast atmosphere on all exposed surfaces. It is only applicable to those
-
Supplier: CSA Group
Description: ISO 9227:2017 specifies the apparatus, the reagents and the procedure to be used in conducting the neutral salt spray (NSS), acetic acid salt spray (AASS) and copper-accelerated acetic acid salt spray (CASS) tests for assessment of the corrosion resistance of metallic
-
Description: of clogging or binding of moving parts. The purpose of testing is to assess as early as possible the ability of the instrument, and particularly of the surfaces and protective coatings of the instrument, to resist the effects of a salt atmosphere. Normally, representative
-
Supplier: Associated Environmental Systems
Description: Corrosive atmosphere chambers subject test items to corrosion without introducing other contaminants into the test area. Associated Environmental Systems' salt spray chambers are entirely self-contained. The basic chamber conforms to military specifications, including
- Configuration: Benchtop / Instrument, Reach-In
- Features: Humidity Control, Windows, Other
- Temperature Control: Heating
- Test Parameters: Corrosion (Salt Fog / Immersion)
-
Supplier: CSA Group
Description: ISO 21207:2015 defines two accelerated corrosion test methods to be used in assessing the corrosion resistance of products with metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or by winter road de-icing
-
Description: removal of these special atmospheres. The standard also provides safety requirements for the generation, storage and use of special atmosphere gases. Requirements are also provided to cover salt baths, open liquid quench tanks, and integral quench tank applications. (96 pp.,
-
Supplier: CSA Group
Description: NEW! IEC 60068-2-52:2017 is available as IEC 60068-2-52:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60068-2-52:2017 specifies the application of the cyclic salt mist test
-
Supplier: Element Materials Technology
Description: Salt Fog/Corrosive Atmosphere Fungus Testing HALT/HASS (Highly Accelerated Life Testing/Highly Accelerated Stress Screening) Icing/Snow/Rain/Wind Solar Radiation/Weathering Effects RDGT/TAAF Programs (Reliability Development Growth Test/Test, Analyze, and Fix
- Accelerated (HALT / HASS): Yes
- Capabilities: Component / Product Testing, Component / Product Comparisons, Certification / Qualification, Evaluation and Analysis, In-Process In-Line Testing, Performance Testing, Reliability / Robustness, Test Development, Test Fixtures / Equipment, Test Panel / Sample
- Combined Environments / Conditions: Yes
- Forms Tested: Components / Parts, Products (Equipment / Devices), Samples / Materials
-
Supplier: ASTM International
Description: 1.1 This ion chromatographic test method describes the determination of sulfuric acid mist in air samples collected from workplace atmospheres in a three-piece cassette filter. 1.2 The lower detection limit of this test method is 0.017 mg/m3 of sulfuric acid (H2SO4) mist in 60
-
Supplier: ASTM International
Description: 1.1 This ion chromatographic test method describes the determination of sulfuric acid mist in air samples collected from workplace atmospheres in a three-piece cassette filter. 1.2 The lower detection limit of this test method is 0.017 mg/m of sulfuric acid (H2SO4) mist in 60 L
-
Supplier: ASTM International
Description: 1.1 This ion chromatographic test method describes the determination of sulfuric acid mist in air samples collected from workplace atmospheres on a mixed cellulose ester (MCE) filter. Note 1: Other filter types such as quartz fiber, polytetrafluoroethyl ene (PTFE), and polyvinyl
-
Supplier: ASTM International
Description: 1.1 This ion chromatographic test method describes the determination of sulfuric acid mist in air samples collected from workplace atmospheres on a mixed cellulose ester (MCE) filter. Note 1-Other filter types such as quartz fiber, polytetrafluoroethyl ene (PTFE), and polyvinyl
-
Supplier: Quantachrome Instruments
Description: , or an extended mass range for a single sample. The independently temperature-controll ed balance head environment ensures long term stability. The small sample chamber ensures rapid changes in sample atmosphere conditions when the relative humidity is altered during an analysis. Sample(s)
- Display & Special Features: Laboratory / Batch
- Property Analyzed: Absorption / Water Absorption, Porosimetry / Pore Volume
- Test Media / Material: Adhesives / Coatings, Ceramics / Glass, Concrete / Cement, Food / Drugs, Powders / Granular Materials, Textiles
-
Supplier: KSB AG
Description: Design Diaphragm valve with gunmetal body and threaded ends for drinking water installations in building services to DIN 1988, DIN-DVGW Waterapproved acc. to test W 270, in compliance with KTW recommendations (use of elastomers in drinking water applications); shut-off and sealing
- Actuation: Manual / Hand
- Connection: Threaded
- Material of Construction: Brass / Bronze
- Media Description: Water, Cold Water, Salt Water
-
Supplier: KSB AG
Description: Design Flanged diaphragm valve for drinking water installations toDIN 1988, DIN-DVGW Water approved acc. to test W 270, in compliance withKTW recommendations (use of elastomers in drinking water applications); shut-off and sealing to atmosphere by completely enclosed diaphragm
- Actuation: Manual / Hand, Electric, Pneumatic
- Connection: Bolt Flange
- Media Description: Water (General), Hot Water, Cold Water, Salt Water
- Media Temperature: 14 to 194 F
-
Supplier: R. STAHL, Inc.
Description: Watertight luminaire Features Rugged and low profile Simple to install and maintain. Proven ingress protection Available for mounting on pipe with cable entry through pipe Resistant to vibrations Tested according to IEC 60945;1996 Resistant to salt-laden atmospheresApplicati ons
- Application: Outdoor
- Bulb Included: Yes
- Explosion-proof: Yes
- Ingress Protection(IP) Rating Against Foreign Objects: Type 5
-
Supplier: International Thermal Systems LLC.
Description: mechanism locates the part into the quench with minimal heat loss. Quenching solutions can include water, glycol, oil, salt bath, or air. Quench solution temperatures are tightly monitored and controlled. Typical quench systems are located at the furnace level, or in a pit, and can be either
- Application: Quenching
- Atmosphere: Air / Oxidizing, Inert, Salt Bath
- Configuration: Other
- Controller Type: Programmable
-
Supplier: ASCO
Description: • Designed to meet vibration and/or shock per ISA specification S71.03C2. High shock construction • Handles aggressive atmosphere per salt resistance testing (ASTM B117) •Most hardware is stainless steel, and all aluminum components are hard anodized and Nituff ® coated
- Media Description: Air, Water
- Number of Ports/Ways: 3
- Power: 24 volts
- Pressure Rating: 125 psi
-
Supplier: Process Sensing Technologies USA
Description: heaters, eliminates the requirement for routine maintenance and minimises operating costs. An optional Weatherguard protects sensor from rain and salt spray and has the option for remote gas testing. Features: Certified Ex d IIC to IECEx and ATEX Temperature compensated
- Features: Self Calibration
- Instrument Type: Detector
- Measurement Type: %LEL, %Volume
- Operating Humidity: Over 0.0 %
-
Supplier: Continental Hydraulics
Description: -Nickel surface treatment to ensure a salt spray resistance of up to 370 h. (test conducted per UNI EN ISO 9227 and evaluated per UNI EN ISO 10289). The Zinc-Nickel surface treatment is available on the pilot operated valves upon request. A statement of conformity to the applicable
- Actuation: Electric
- Pressure Rating: 5000 psi
- Valve Type: Control Valves, Directional Valves, Solenoid Valves, Spool Valves
-
Supplier: Knight Optical (UK) Ltd
Description: Potassium Bromide (KBr) is a crystalline compound of potassium and bromide with a rock-salt type structure. It is used in optical applications in the UV, Visible, MWIR, and LWIR waveband regions. KBr has a melting point of 730°C and must be used in a moisture-free environment as the
- Diameter, Square Side, or Rectangular Length: 0.2000 mm
- Materials: Specialty / Other
- Surface Flatness: λ/2
- Surface Quality: 60-40 Scratch / Dig
-
Description: . Sapphire windows contain solid chemical inertia to common acids/alkalines, with the sole exception being hot caustic salts. Sapphire outperforms other materials in coping with corrosive chemicals and erosive atmospheres, hence expanding the usage of sapphire windows into the domain
- Parallelism or Wedge Angle: 0.5000 arcmin
- Surface Quality: 20-10 Scratch / Dig, 40-20 Scratch / Dig, 60-40 Scratch / Dig, Other
- Window Shape: Square
Find Suppliers by Category Top
Featured Products Top
-
Salt-Fog and Salt-Spray Testing Accelerated corrosion atmospheres for salt spray testing can be applied to items as large as 16ft by 15ft by 15ft. We have portable chambers that can be configured to a multitude of (read more)
Browse Environmental Exposure (Climatics) Testing Services Datasheets for E-Labs, Inc. -
simulate and control most climatic conditions including temperature, humidity, altitude, pressure, vibration, temperature cycling, solar heating, exposure to UV light, corrosive atmospheres, and other climatic variables. These climatic testing services play an important role in product and (read more)
Browse Environmental Exposure (Climatics) Testing Services Datasheets for E-Labs, Inc. -
Contamination by Fluids 505.4 Solar Radiation 506.4 Rain 507.4 Humidity 508.4 Fungus 509.4 Salt Fog 510.4 Sand and Dust 511.4 Explosive Atmosphere 512.4 Immersion 513.4 Acceleration 514.4 Vibration 515 (read more)
Browse Product and Component Testing Services Datasheets for E-Labs, Inc. -
services that have the ability to simulate and control most climatic conditions including temperature, humidity, altitude, pressure, vibration, temperature cycling, solar heating, exposure to UV light, corrosive atmospheres, and other climatic variables. These climatic testing services play an (read more)
Browse Environmental Exposure (Climatics) Testing Services Datasheets for E-Labs, Inc. -
simulate and control most climatic conditions including temperature, humidity, altitude, pressure, vibration, temperature cycling, solar heating, exposure to UV light, corrosive atmospheres, and other climatic variables. These climatic testing services play an important role in product and (read more)
Browse Environmental Exposure (Climatics) Testing Services Datasheets for E-Labs, Inc. -
and control most climatic conditions including temperature, humidity, altitude, pressure, vibration, temperature cycling, solar heating, exposure to UV light, corrosive atmospheres, and other climatic variables. These climatic testing services play an important role in product and component (read more)
Browse Environmental Exposure (Climatics) Testing Services Datasheets for E-Labs, Inc. -
, Salt Fog, Sand and Dust, Immersion Testing and more. We also offer full EMI and EMC Testing, and (read more)
Browse Flow and Pressure (Fluid Dynamics) Testing Services Datasheets for E-Labs, Inc. -
, Salt Fog, Sand and Dust, Immersion Testing and more. We also offer full EMI and EMC Testing, (read more)
Browse Environmental Exposure (Climatics) Testing Services Datasheets for E-Labs, Inc. -
Climatic Testing for issues such as Temperature, Humidity, Salt Fog, Sand and Dust, Immersion Testing and more (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc. -
-Labs, we perform Climatic Testing for issues such as Temperature, Humidity, Salt Fog, Sand and Dust, (read more)
Browse Shock and Vibration (Dynamics) Testing Services Datasheets for E-Labs, Inc.
Conduct Research Top
-
What is a Salt Fog Test?
A salt fog test subjects test specimens to an atomized fog of water having a high salt content (typically 5%). The purpose is to simulate a corrosive atmosphere.
More Information Top
-
AMLCD design considerations for avionics and vetronics applications
The displays were exposed to the standard 48-hour, 5% salt atmosphere test at room temperature defined in MIL-STD-810E, Method 509.3.