80-50 Scratch / Dig Optical Mirrors
from Newport MKS
The UBBR1-1UV Broadband Hollow Retroreflector is constructed of three front-surface flat mirrors assembled into a corner cube. A stress-free mounting technique is employed to ensure dimensional stability. This geometry results in a reflected beam that is precisely parallel to the incident beam,... [See More]
- Surface Quality: 80-50 Scratch / Dig; 80-50 scratch-dig
- Wavelength Range: 225 to 700
- Mirror Types: Reflector
- Mirror Shape: Hollow Retroreflector
from CeNing Optics Co., Ltd.
Metallic Coatings are very broadband and relatively insensitive to incidence angle. They offer good performance at a low price. Although they are most commonly used, metallic reflective coatings are delicate and require crae during cleaning. They are only recommended for low power applications. The... [See More]
- Surface Quality: 60-40 Scratch / Dig; 80-50 Scratch / Dig
- Wavelength Range: 250 to 800
- Mirror Types: Flat Mirror; Parabolic Mirror (optional feature)
- Diameter/Width: 5 to 76.2
from Newport MKS
The UBBR2.5-1UV Broadband Hollow Retroreflector is constructed of three front-surface flat mirrors assembled into a corner cube. A stress-free mounting technique is employed to ensure dimensional stability. This geometry results in a reflected beam that is precisely parallel to the incident beam,... [See More]
- Surface Quality: 80-50 Scratch / Dig; 80-50 scratch-dig
- Wavelength Range: 225 to 700
- Mirror Types: Reflector
- Mirror Shape: Hollow Retroreflector
from Edmund Optics Inc.
Over 95% Reflectance of Visible Laser Diode Light. Ideal for Multiple Reflection Systems. Coating Optimized for 633nm at 45 ° AOI. These Visible Laser Diode Mirrors are specially coated to attain maximum reflection of visible laser diodes. Optimized for 633nm at a 45 ° angle of incidence,... [See More]
- Surface Quality: 80-50 Scratch / Dig
- Diameter/Width: 10
- Mirror Types: Laser Mirror
- Thickness: 3
from Shimadzu Corporation
An off-axis parabolic mirror converts plane waves into spherical ones and vice versa with high accuracy. This aspherical mirror is indispensable for spectrometers and astronomical optical instruments which require high resolution. [See More]
- Surface Quality: 80-50 Scratch / Dig
- Focal Length: 125 to 787
- Mirror Types: Parabolic Mirror
- Second Focal Length: 134 to 789
from Tower Optical Corporation
Cold Mirrors are used where the requirements are to reflect visible light and remove the heat by transmission. Operation at an AOI of 45 º is preferred. The most common wavelength range for transmission through the cold mirror is 800 - 1200nm. The average transmission range is T >85%. [See More]
- Surface Quality: 80-50 Scratch / Dig
- Wavelength Range: 800 to 1200
- Mirror Types: Flat Mirror
- Diameter/Width: 15 to 300
from Advanced Optics, Inc.
Economy optical mirrors offer a low-cost alternative to ultra-high precision optics. They are flat to approximately one wave per inch. These economy optical mirrors have the same low-pinhole, long-lasting AlSiO coating as our finest quality mirrors. In addition to those listed, other sizes are... [See More]
- Surface Quality: 80-50 Scratch / Dig
- Diameter/Width: 25.4 to 152
- Mirror Types: Flat Mirror
- Thickness: 5.7 to 6.35
from Shimadzu Corporation
This aspherical mirror, which focuses parallel light to the focus point without aberrations, or converts a point light source from the focuse point into parallel light without aberrations, is used in spectroscopic systems that require high resolution. [See More]
- Surface Quality: 80-50 Scratch / Dig
- Focal Length: 275 to 350
- Mirror Types: Parabolic Mirror
- Second Focal Length: 279 to 351
from Tower Optical Corporation
Hot Mirrors are used in applications when there is the requirement to separate visible light from heat. The hot mirror accomplishes this by reflecting the heat. The use of Borosilicate type glass allows operation in high temperatures. Operation at an AOI of 0 º is preferred. The most common... [See More]
- Surface Quality: 80-50 Scratch / Dig
- Wavelength Range: 420 to 700
- Mirror Types: Flat Mirror
- Diameter/Width: 15 to 300
from Advanced Optics, Inc.
Bare Aluminum coating provides a higher reflectivity than overcoated aluminum. This feature makes it the coating of choice for some systems, such as spectrophotometers. Unlike AlSiO, bare aluminum is not very durable and because of the softness of the coating, mirrors are difficult to clean without... [See More]
- Surface Quality: 80-50 Scratch / Dig
- Diameter/Width: 25.4 to 76.2
- Mirror Types: Flat Mirror
- Thickness: 1.6 to 3.2