Double Pole, Double Throw (DPDT) Liquid Level Switches

5 Results
Vibrating Rod For Hazardous Locations -- VR-90
from BinMaster, Inc.

The VR-90 is a vibrating rod used for level indication in granular and coarse-grained bulk solids contained in bins, tanks, silos, and hoppers. It features a round, stainless steel rod that resists buildup and requires minimal maintenance. The VR-90 is appropriate for a wide variety of processing... [See More]

  • Pole & Throw: Double Pole, Double Throw (DPDT)
  • Maximum AC Voltage: 253
  • Construction: Electro-mechanical switch
  • Maximum DC Voltage: 253
Magnetic level gauge -- MS41
from ABB Measurement & Analytics

The unique magnetic coupling action eliminates the need for seals, diaphragm springs, or torque tubes because there is no physical contact with the process. The switch configuration also has no process connections which insures complete isolation from the process. The maintenance free design... [See More]

  • Pole & Throw: Double Pole, Double Throw (DPDT)
  • Technology: Other (Such as tilt etc.)
  • Material Temperature: 850
  • Operating Temperature: -58 to 176
RF Capacitance - MK2 -- 11-8511-211
from Monitor Technologies LLC

Suitable for dry solids, wet solids, liquids, viscous liquids, and slurries [See More]

  • Pole & Throw: Double Pole, Double Throw (DPDT)
  • Maximum Current: 5
  • Construction: Electro-mechanical switch
  • Maximum AC Voltage: 250
Single-Point Level Switch -- LS-800-5 Series
from Gems Sensors & Controls

Ideal for Large or Small Tanks. Mounts Outside the Tank. 3/4" Brass or Stainless Steel NPT Ports. Bottle type level switches are ideal for large or small tanks or where access to the inside is impractical or impossible. These units mount completely outside of the tank, at the level actuation point. [See More]

  • Pole & Throw: Single Pole, Single Throw (SPST); Double Pole, Double Throw (DPDT)
  • Configuration: Normally Open (NO); Normally Closed (NC)
  • Construction: Electro-mechanical switch
  • Maximum  Pressure: 750
Electrolyte Level Sensor -- ELS
from Albér

The Alber ELS is a non-invasive level sensor designed to save you time and money!. ● Designed specifically to comply with the NERC PRC-005 requirements for electrolyte level inspection. ● Eliminate the required quarterly inspection of battery electrolyte levels. ● No alarm …... [See More]

  • Pole & Throw: Double Pole, Double Throw (DPDT)
  • Configuration: Normally Open (NO); Normally Closed (NC)
  • Construction: Electro-mechanical switch
  • Maximum Current: 2