Clean Water Heating Immersion Heaters
from Backer Hotwatt Inc.
Features: Designed for direct immersion thru 2 ” bung opening in 55 gallon drums. Incoloy sheath for long life in most materials. 60-250 ̊F integral thermostat. Manual reset thermostat protects against overheating. Adjustable mounting bracket. Low watt density (1000w - 120w - 8w watts per... [See More]
- Applications: Clean Water Heating; Process Waters
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 60 to 250
- AC Voltage Required: 120 to 240
from WATTCO
Wattco offers a wide variety of process heating equipment to our customers. We manufacture boiler heaters that suit many different sizes and dimensions that customers need. If a boiler has a flanged heater that need to be replaced, Wattco can replicate the model you currently have from practically... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Caustic Solutions
- Sleeve (Sheath) Material: Copper; Nickel Alloy; Stainless Steel; Steel
- kWatts: 5.00 to 3000.00
from Tempco Electric Heater Corporation
Flanged Immersion Heaters are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating type heaters, to a pipe. [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Liquid Paraffin
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 350 to 1200
- AC Voltage Required: 240 to 480
from Heatron, Inc.
Water, water-soluble and low viscosity fluid heater. Compact immersion cartridge heaters are designed for minimal assembly and ease of service in the field. With smaller fittings than tubular versions, tight spaces won't pose a problem for these high performance immersion cartridge heaters. Contact... [See More]
- Applications: Water-soluble And Low Viscosity Fluid; Clean Water Heating
- Immersion (Heated) Length: 36 to 72
- Heater Type: Screw Plug / NPT Threaded; Cartridge Heater
- Sleeve (Sheath) Material: Stainless Steel; Incoloy®
from WATTCO
Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid... [See More]
- Applications: Food Equipment, Soap and Detergent Solutions, Freeze Protection; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions
- AC Voltage Required: 208 to 600
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Watt Density: 8.8 to 67.8
from Tempco Electric Heater Corporation
Screw Plug Immersion Heaters consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling.. [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Liquid Paraffin
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 350 to 1200
- AC Voltage Required: 120 to 480
from WATTCO
Industrial immersion heaters are a fast and efficient way of heating up various liquid solutions in processing equipment, as well as in large tanks through the use of tank immersion heaters. Heating up liquids using direct heat transfer allows for the liquid medium to quickly reach the desired... [See More]
- Applications: Solvents, Salts, Freeze Protection; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Caustic Solutions; Liquid Paraffin
- Sleeve (Sheath) Material: Nickel Alloy; Stainless Steel; Steel
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
from WATTCO
Over the Side Heaters are a popular industrial heating product for economic and practical uses. Using a water-resistant terminal housing, these industrial heaters come in many shapes and sizes to fit within your tank dimensions and specifications. Wattco over the side immersion heaters are custom... [See More]
- Applications: Solvents, Salts, Freeze Protection; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Caustic Solutions; Liquid Paraffin
- AC Voltage Required: 208 to 600
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Watt Density: 14 to 60
from WATTCO
Screw Plug heaters from WATTCO ™ consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded coupling in the tank wall or vessel, or installed in... [See More]
- Applications: Food Equipment, Soap and Detergent Solutions, Freeze Protection; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions
- AC Voltage Required: 120 to 600
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Watt Density: 11 to 80
from Durex Industries
Flanged immersion heaters are constructed with formed tubular heating elements brazed or welded to a high pressure flange for direct immersion into tanks and pressure vessels. Flanged immersion heaters are capable of achieving higher wattage requirements than screw plug heaters due to the fact that... [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 240 to 480
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- kWatts: 0.02
from Process Heating Company, Inc.
The "Problem Solver" for underground tanks. Having trouble solving your underground storage tank problems? PHCo Lo-Density Drop-In Heater Kits have been designed for the heating of underground tanks and other applications that cannot be cut or welded on. These heaters can be used in multiples if... [See More]
- Applications: Ink, Asphalt, Pulp, & Construction; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from OMEGA Engineering, Inc.
•. 2" NPT Brass Screw Plug. •. Copper Sheath Elements. •. High Watt Density (61 - 67 W/In2). •. 3 - 12 kW. •. Without Thermostat. •. 240 and 480 Volt, Three Phase. •. General Purpose or Moisture Resistant/ Explosion Resistant Terminal Enclosure [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 240 to 480
- Phase: Three Phase AC Voltage
- kWatts: 3.00 to 12.00
from Chromalox
208, 240 and 480 Volt, Three Phase. Third-party certifications: UL Recognized, CSA. Applications. Hot Water Storage Tanks. Warming Equipment. Preheating All Grades of Oil. Food Processing Equipment. Cleaning and Rinsing Tanks. Heat Transfer Systems. Process Air Equipment. Boiler Equipment. Freeze... [See More]
- Applications: Clean Water Heating; Process Waters
- AC Voltage Required: 208 to 480
- Phase: Three Phase AC Voltage
- kWatts: 12.00 to 22.50
from Process Technology
Small design to fit all size aquaculture applications. FEATURES. 316 stainless steel for fresh water or titanium for salt water applications. Available in Over the Side, L Shaped and Screwplug Styles. Watt densities up to 40 watts/square inch (6.5 w/cm ²). Vapor resistant, flame retardant... [See More]
- Applications: Salt Water; Clean Water Heating
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 6.00
from Heat Exchange & Transfer, Inc.
Flanged immersion heaters consist of a number of “U ” bend tubular heating elements welded into a standard ANSI pipe flange. Elements are supported with TEMA style baffles. A thermowell is installed through the center of the flange for the over temperature sensor. A NEMA rated enclosure... [See More]
- Applications: Gases/Vapors; Clean Water Heating; Process Waters; High Purity Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions
- AC Voltage Required: 480
- Phase: Three Phase AC Voltage
- kWatts: 6.00
from Durex Industries
Screw plug immersion heaters utilize an NPT screw plug for direct immersion into liquids, oils, or other heat transfer mediums. These heaters utilize a rugged tubular heating element with sheath materials of copper, stainless steel, or Incoloy. The elements are formed and welded or brazed into the... [See More]
- Applications: Clean Water Heating
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 350
- AC Voltage Required: 120 to 240
from Process Heating Company, Inc.
Flanged Immersion Heaters for use in tanks, large vats and reservoirs. These heaters consist of a standard 150# or 300# flange for mounting and PHCos exclusive heating elements. The elements are "dry well" and "low density" design. The dry wells allow the elements to be serviced or replaced without... [See More]
- Applications: Ink, Asphalt, Pulp, & Construction; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from OMEGA Engineering, Inc.
•. Rugged General Purpose Models-UL Listed and NEMA-1 Rated. •. Optional Moisture Tight/ Explosion Resistant Enclosure Available. •. Ideal for pH 6 to pH 8 Clean Liquids. •. 1.5 and 15 kW [See More]
- Applications: General Purpose; Clean Water Heating
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 15.00
from Chromalox
1-1/4" NPT Brass Screw Plug. Copper Sheath Elements. High Watt Density (43 - 86 W/In ²). 1 - 2 kW. Intergral Thermostat (SPST). 120 and 240 Volt, Single Phase. General Purpose or Moisture Resistant/Explosion Resistant Terminal Enclosure. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 2.00
from Process Technology
Quick plug in system for aquaculture applications. 316 stainless steel for fresh water or titanium for salt water applications. Watt densities up to 40 watts/square inch (6.5 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 8.5 flexible cord/plug. P1 thermal... [See More]
- Applications: Salt Water; Clean Water Heating
- AC Voltage Required: 100 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- kWatts: 1.00 to 5.60
from Heat Exchange & Transfer, Inc.
The UST (Unitary Storage Tank) heater is a completely packaged tank heating unit. The UST utilizes a flexible open coil heating element. The open coil heater consists of nickel chromium resistance coils supported in high temperature ceramic insulators on a flexible stainless steel strap. Each... [See More]
- Applications: Asphalt, Wax, Pitch, Creosote; Clean Water Heating; Process Waters; High Purity Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Caustic Solutions; Liquid Paraffin
- AC Voltage Required: 120 to 600
- Phase: Three Phase AC Voltage
- kWatts: 10.00
from Process Heating Company, Inc.
Heater elements are readily available in lengths from two feet to forty feet and can be custom sized to match both heating requirements and tank dimensions. Single and three-phase elements can be furnished. Elements are constructed of nickel chromium alloy coils that are supported by patented... [See More]
- Applications: Ink, Asphalt, Pulp, & Construction; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin
- AC Voltage Required: 200 to 600
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
from OMEGA Engineering, Inc.
•. 1" Brass Screw Plug. •. Copper Sheath for Clean Water Applications. •. Integral Bulb and Capillary Thermostat — 3 Temperature Ranges Available. •. U.L. Listed with General Purpose NEMA-1 Rated Enclosure [See More]
- Applications: Clean Water Heating
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 240
- AC Voltage Required: 120 to 240
from Chromalox
2" NPT Brass Screw Plug. Copper Sheath Elements. High Watt Density (46 - 53 W/In ²). 1.5 - 15 kW. Integral Thermostat (DPST). 120, 208, 240 and 480 Volt, Single Phase. General Purpose Terminal Enclosure. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 15.00
from Process Technology
Designed for safety and low maintenance. FEATURES. Automatic temperature protection is built in. Won't burn out due to air or scale exposure. 316 stainless steel for fresh water or titanium for salt water applications. Available in Over the Side, L Shaped and Axial Styles. Watt densities up to 40... [See More]
- Applications: Salt Water; Clean Water Heating
- AC Voltage Required: 100 to 240
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 1.70
from Process Heating Company, Inc.
No tanks to drain. Easily installed the heavy-duty assemblies weld directly into storage tanks to deliver long term and economical performance. Once installed, the flexible heater elements are removable from heater tubes without the need to drain the tank or disconnect fluid lines. LO-DENSITY IS A... [See More]
- Applications: Ink, Asphalt, Pulp, & Construction; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from OMEGA Engineering, Inc.
The MT-1 series immersion heater is ideally suited for clean water requirements. Models are available with a general purpose terminal enclosure1 or a rugged moisture resistant explosion resistant terminal enclosure. [See More]
- Applications: General Purpose; Clean Water Heating
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 0.60 to 2.00
from Chromalox
2-1/2" NPT Brass Screw Plug. Integral Thermostat (DPST). Copper Sheath Elements. High Watt Density (46 - 53 W/In ²). 3 - 18 kW. 120, 208, 240 and 480 Volt, 1 and 3 Phase. General Purpose Terminal Enclosure. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 3.00 to 18.00
from Process Heating Company, Inc.
Rigid Tubular Drywell Heaters solve the problem of heating viscous products without damage to the product being heated. The Rigid Heaters can be installed as new or as replacement equipment for existing metal sheathed style tubular units that have higher watt density. Process Heatings Rigid Heaters... [See More]
- Applications: Ink, Asphalt, Pulp, & Construction; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from OMEGA Engineering, Inc.
•. Rugged, Heavy Duty Construction. •. Models Available with Explosion Resistant Enclosure. •. 0.475" Diameter Copper Sheath, Ideal for pH 6 to pH 8 Liquids. •. 3 to 18 kw. •. 120, 208, 240 and 480 Vac 1 and 3 Phase Power [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- kWatts: 3.00 to 18.00
from Chromalox
1" NPT Brass Screw Plug. Copper Sheath Element. High Watt Density (64 - 86 W/In ²). 0.75 -3 kW. Integral Thermostat (SPST). 120 and 240 Volt, Single Phase. General Purpose or Moisture Resistant/Explosion Resistant Terminal Enclosure. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 0.75 to 3.00
from Process Heating Company, Inc.
Unitized Heaters remain Process Heating Company's best selling product line. Its popularity continues due to the ease of installation into any tank or vat; its 100% efficiency; its ease of automation; its lack of maintenance and remarkable reliability. The Lo-Density Unitized Heater dissipates as... [See More]
- Applications: Ink, Asphalt, Pulp, & Construction; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Caustic Solutions; Liquid Paraffin
- Phase: Single Phase AC Voltage (optional feature); Three Phase AC Voltage (optional feature)
- Maximum Operating (Sheath) Temperature: 750
- AC Voltage Required: 200 to 600
from OMEGA Engineering, Inc.
The OMEGALUX ® CH-SD Series features a compact 3 element heater design with a 2" brass screw plug. The Incoloy sheath allows compatibility with difficult clean liquids. A popular application for CH-SD Series is heating for industrial dishwashing equipment. Please Note: This immersion heater... [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 208 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 5.00 to 10.00
from Chromalox
2" NPT Brass Screw Plug. INCOLOY ® Sheath Elements. HIgh Watt Density (50 W/In ²). 5 - 10 kW. Without Thermostat. 208, 240 and 480 Volt, 1 and 3 Phase. General Purpose Terminal Enclosure [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 208 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 5.00 to 10.00
from OMEGA Engineering, Inc.
Omegalux ® field adjustable screw plug immersion heaters can be applied to a variety of clean water and oil applications. The unique versatility of this design allows field adjustment of the rating by simple connections to the six elements of the heater. This simplifies selection and spare parts... [See More]
- Applications: Oil Applications; Clean Water Heating
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 300
- AC Voltage Required: 120 to 480
from Chromalox
2" NPT Brass Screw Plug. Copper Sheath Elements. High Watt Density (61 - 67 WIn ²). 3 - 12 kW. Without Thermostat. 240 and 480 Volt, Three Phase. General Purpose, Moisture Resistant/Explosion Resistant Terminal Enclosure, or Moisture Resistant. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 240 to 480
- Phase: Three Phase AC Voltage
- kWatts: 3.00 to 12.00
from OMEGA Engineering, Inc.
•. Flange Sizes 3" to 5" of High Grade Steel. •. General Purpose, NEMA 1 Rated Enclosure or Moisture Resistant, Explosion Resistant † Enclosure Available. •. Sturdy 0.475"Diameter Copper Elements. •. 6 to 150 kW. •. 240 and 480 Vac Power, 1 and 3 Phase [See More]
- Applications: Clean Water Heating; Process Waters
- AC Voltage Required: 240 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 6.00 to 150.00
from Chromalox
2 1/2" NPT Steel Screw Plug. INCOLOY Sheath Elements (2 to 80 W/In ² Water) (2 to 23 W/In ² Oil). Field Adjustable kWs and Voltage Ratings. 0.5 - 40kW Water, 0.5 - 10 kW Oil. Integral Thermocouple. 120, 208, 240, and 480V 1 Phase. 208, 240, and 480V 3 Phase. General Purpose Terminal... [See More]
- Applications: Oil; Clean Water Heating
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 0.50 to 40.00
from OMEGA Engineering, Inc.
•. GTF -- Side Mount. •. GTFL -- L-Shaped. •. Fluoropolymer Covered Stainless Steel Elements. •. 10 W/In2. •. 1- 6 kW. •. 120, 240 and 480 Volt, Single Phase. •. Moisture Resistant Terminal Enclosure [See More]
- Applications: Clean Water Heating
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 260
- AC Voltage Required: 120 to 480
from Chromalox
2-1/2 x 2-1/2" Square Brass Flange. Copper Sheath Elements. High Watt Densities (See Catalog Page for Table). 13.5 - 18 kW. 208 and 480 Volt, Three Phase. Third-party certifications: UL Recognized, CSA [See More]
- Applications: Clean Water Heating; Process Waters
- AC Voltage Required: 208 to 480
- Phase: Three Phase AC Voltage
- kWatts: 5.00 to 18.00
from OMEGA Engineering, Inc.
bull;. Integral Thermostat. •. General Purpose Enclosure NEMA-1 Rated. •. .475" (1cm) Diameter Copper Sheath. •. 3 to 18 kW. •. Dependable 3 Element Heater Design. •. 120, 208, 240 and 480 Vac Power; 1 and 3 Phase Models. •. Integral Thermostat. •. General Purpose... [See More]
- Applications: Clean Water Heating
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 250
- AC Voltage Required: 120 to 480
from Chromalox
LTFX units provide low watt density heating over a large surface area, while providing precise temperature control for such materials as fire water storage, asphalt, diesel, lube oils, ethanol, bio-diesel, glycerin, animal fats, vegetable oils, fuel oils, or similar types of liquids. 4 - 240 kW Unit... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Liquid Paraffin
- AC Voltage Required: 480 to 600
- Phase: Three Phase AC Voltage
- kWatts: 4.00 to 240.00
from OMEGA Engineering, Inc.
•. 11/4" NPT Brass Screw Plug. •. Copper Sheath Element. •. 64 - 86 W/In2. •. 750 - 5,000 Watts. •. 120 and 240 Volt, Single Phase. •. Without Terminal Cover. •. Without Thermowell [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 120 to 240
- Phase: Single Phase AC Voltage
- kWatts: 0.75 to 5.00
from Chromalox
STFX units provide replaceable-element design in a compact setting, while providing precise temperature control. Units comply with API- 614 and can be used for such materials as lube oil, fire water storage, water solutions, asphalt, water/glycol, diesel, acidic solutions, ethanol, bio-diesel... [See More]
- Applications: Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Mild Corrosive Solutions; Severe Corrosive Solutions; Liquid Paraffin
- AC Voltage Required: 240 to 600
- Phase: Three Phase AC Voltage
- kWatts: 1.00 to 25.00
from OMEGA Engineering, Inc.
•. Passivated Stainless Steel Sheath for Weak Corrosive Solutions. •. 0.75 to 3 kW. •. 120, and 240 Vac, 1 phase. •. Integral Thermostat [See More]
- Applications: Clean Water Heating
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 240
- AC Voltage Required: 120 to 240
from OMEGA Engineering, Inc.
Lightweight, portable, easy to install L-shape construction, puts the heat at the bottom of the tank and the terminal enclosure at the top of the tank. These heaters are convenient answers for many immersion heating applications. Capacities, dimensions and sheaths fit a wide range of heating... [See More]
- Applications: Clean Water Heating
- Watt Density: 20 to 40
- Phase: Single Phase AC Voltage
- Heater Type: Screw Plug / NPT Threaded; Over the Side Heater
from OMEGA Engineering, Inc.
These heaters are lightweight and portable and provide convenient solutions to many heating applications. TLC Series heaters have two or three straight heating elements, while KTLC Series heaters have two or three curved heating elements. [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 120 to 480
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 2.00 to 18.00
from OMEGA Engineering, Inc.
PPLICATIONS. Primarily for use in salt baths. Available in other sheath materials and watt densities for most liquids and viscous materials. Conctact sales for further information. FEATURES. Vapor resistant cast iron terminal box for dependable service. Optional features include special voltage or... [See More]
- Applications: Clean Water Heating
- AC Voltage Required: 240 to 480
- Phase: Single Phase AC Voltage
- kWatts: 3.00 to 7.50
from OMEGA Engineering, Inc.
•. Copper Sheath Nickel Plated Elements. •. High Watt Density (49 - 58 W/In2). •. 4 and 6 kW. •. 208 and 240 Volt, Single Phase [See More]
- Applications: Clean Water Heating
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 250
- AC Voltage Required: 208 to 240
from OMEGA Engineering, Inc.
•. Ideal For Clean Liquids within pH 6 to pH 8 Range. •. Quality Construction with Copper Sheath. •. Models Available with 120V, 208V, 240V, or 480V, 1 Phase Power. •. Integral Thermostat [See More]
- Applications: Clean Water Heating
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 250
- AC Voltage Required: 120 to 490
from OMEGA Engineering, Inc.
•. 1/2, 3/4, and 1 1/4 NPT Screw Plugs. •. 316 SS Sheath. •. 400 to 1000 W. •. 120 and 240 V, 1-Phase. •. Single Thread Pipe Construction [See More]
- Applications: Clean Water Heating
- Phase: Single Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 482
- AC Voltage Required: 120 to 240
from OMEGA Engineering, Inc.
•. Thermostat for Reliable Operation. •. Incoloy Sheath for Compatibility with Most Industrial Fluids. •. 240 and 480 V Models with 3 Phase Power. •. 3 to 18 kW. •. 46 to 51 W/in2 [See More]
- Applications: Clean Water Heating
- Phase: Three Phase AC Voltage
- Maximum Operating (Sheath) Temperature: 250
- AC Voltage Required: 240 to 480