Single Phase Immersion Heaters
from WATTCO
Flanged heaters are commonly used in many chemical, petroleum and water based applications. Consisting normally of an ANSI rated flange with several hairpin elements or bugle tubular elements extending from the face of the flange, this electric heater uses direct heat application to the liquid... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Watt Density: 8.8 to 67.8
- AC Voltage Required: 208 to 600
- Heater Type: Flange Mount / (ANSI) Flanges
from Backer Hotwatt Inc.
Features. The Hotwatt Immersion Heater may be supplied with various junction boxes for additional terminal or lead protection. For corrosive environments, units can be supplied in other special alloys best suited to the operating conditions. The lead end of the unit may be sealed for extreme... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- kWatts: 0.12 to 21.00
- AC Voltage Required: 120 to 240
- Watt Density: 6 to 38
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 190
- kWatts: 0.50 to 6.00
from WATTCO
Industrial immersion heaters are a fast and efficient way of heating up various liquid solutions in processing equipment, as well as in large tanks through the use of tank immersion heaters. Heating up liquids using direct heat transfer allows for the liquid medium to quickly reach the desired... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Sleeve (Sheath) Material: Nickel Alloy; Stainless Steel; Steel
- Applications: Solvents, Salts, Freeze Protection; Clean Water Heating; Process Waters; Lightweight Oils & Degreasing Solutions; Medium Weight Oils; Heavy Weight Oils; Caustic Solutions; Liquid Paraffin
from Backer Hotwatt Inc.
Features: The Miniature Circulation Heater is a packaged heater for heating small volumes of liquids as in photographic developer solutions, chemicals, dyes and inks. Constructed of 316 series stainless steel. Pressures to 100 psig. [See More]
- Phase: Single Phase AC Voltage
- kWatts: 100.00 to 1200.00
- AC Voltage Required: 120 to 240
- Watt Density: 23 to 120
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 190
- kWatts: 0.50 to 6.00
from WATTCO
Over the Side Heaters are a popular industrial heating product for economic and practical uses. Using a water-resistant terminal housing, these industrial heaters come in many shapes and sizes to fit within your tank dimensions and specifications. Wattco over the side immersion heaters are custom... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Watt Density: 14 to 60
- AC Voltage Required: 208 to 600
- Heater Type: Over the Side Heater
from Backer Hotwatt Inc.
Features: Designed for direct immersion thru 2 ” bung opening in 55 gallon drums. Incoloy sheath for long life in most materials. 60-250 ̊F integral thermostat. Manual reset thermostat protects against overheating. Adjustable mounting bracket. Low watt density (1000w - 120w - 8w watts per... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 60 to 250
- kWatts: 1.00 to 4.00
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 190
- kWatts: 0.50 to 6.00
from WATTCO
Screw Plug heaters from WATTCO ™ consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded coupling in the tank wall or vessel, or installed in... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- Watt Density: 11 to 80
- AC Voltage Required: 120 to 600
- Heater Type: Screw Plug / NPT Threaded
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 190
- kWatts: 0.50 to 6.00
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 190
- kWatts: 1.00 to 6.00
from Tempco Electric Heater Corporation
Typical Applications. Compatible with most plating tank solutions; inert to acids, anodizing and pickling solutions up to 190 °F (88 °C). Replaces more expensive alumina or graphite heaters. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded internal metal element for... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 190
- kWatts: 2.00 to 12.00
from Tempco Electric Heater Corporation
Typical Applications. For plating tanks, rinse tanks and other non-sludging aqueous solutions. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded for safety. Vapor-tight polypropylene terminal enclosure. Standard 3-ft. flexible PVC liquid-tight conduit. 240, 480 volts... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 240 to 480
- Maximum Operating (Sheath) Temperature: 180 to 300
- kWatts: 3.00 to 36.00
from Tempco Electric Heater Corporation
Typical Applications. For plating tanks, rinse tanks and other non-sludging aqueous solutions. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded for safety. Vapor-tight polypropylene terminal enclosure. Standard 3-ft. flexible PVC liquid-tight conduit. 120, 240, 480 volts... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 300
- kWatts: 1.00 to 12.00
from Tempco Electric Heater Corporation
Typical Applications. For plating tanks, rinse tanks and other acidic aqueous solutions. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded for safety. Vapor-tight polypropylene terminal enclosure with universal mounting flange. Standard 3-ft. flexible PVC liquid-tight... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 300
- kWatts: 5.00 to 12.00
from Tempco Electric Heater Corporation
Typical Applications. For plating tanks, rinse tanks and other non-sludging aqueous solutions. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded for safety. Vapor-tight polypropylene terminal enclosure. Standard 3-ft. flexible PVC liquid-tight conduit. 240, 480 volts... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 240 to 480
- Maximum Operating (Sheath) Temperature: 180 to 300
- kWatts: 3.00 to 36.00
from Tempco Electric Heater Corporation
Typical Applications. For plating tanks, phosphatizing and concentrated aqueous solutions. T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded for safety. Vapor-tight polypropylene terminal enclosure with universal mounting flange. Standard 3-ft. flexible PVC liquid-tight... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 300
- kWatts: 3.00 to 18.00
from Tempco Electric Heater Corporation
Standard guards are made of polypropylene. Fluoropolymer (PTFE) guards are available for chromic acid and temperatures above 180 °F (82 °C). T1 thermal fuse protection standard; T2 bi-metal switch optional. Grounded for safety. Vapor-tight polypropylene terminal enclosure with universal. [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 220
- kWatts: 0.50 to 30.00
from Tempco Electric Heater Corporation
This design consists of tubular heating elements silver brazed or TIG welded to a flange cut from steel or stainless steel plate. Flange plate size, thickness and shape are determined by the application. A fiber gasket is supplied with each heater. [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 208 to 575
- Maximum Operating (Sheath) Temperature: 350
- kWatts: 1.00 to 15.00
from Tempco Electric Heater Corporation
Flanged Immersion Heaters are designed for use in tanks and pressurized vessels to heat both liquids and gases. They mate to a companion flange that is either welded to a tank wall or, for circulating type heaters, to a pipe. [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 240 to 480
- Maximum Operating (Sheath) Temperature: 350 to 1200
- kWatts: 1.50 to 375.00
from Tempco Electric Heater Corporation
Screw Plug Immersion Heaters consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling.. [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 350 to 1200
- kWatts: 0.25 to 20.00
from Durex Industries
Screw plug immersion heaters utilize an NPT screw plug for direct immersion into liquids, oils, or other heat transfer mediums. These heaters utilize a rugged tubular heating element with sheath materials of copper, stainless steel, or Incoloy. The elements are formed and welded or brazed into the... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 750
- kWatts: 0.25
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Low watt densities of 18 watts/square inch (2.8 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 180
- kWatts: 0.50 to 6.00
from OMEGA Engineering, Inc.
Adjustable range from -73 to 316 °C (-100 to 600 °F) offers wide field of application . Resolution sensitivity of -17.7 °C (0.1 °F) offers close control of process. Compact size; lengths under 127 mm (5") and diameters less than 20.6 mm (13.16") fit almost any application. Fast... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 600
- Heater Type: Screw Plug / NPT Threaded; Cartridge Heater
from U.S. Plastic Corporation
Hot Zone: 16", Overall Length: 23" [See More]
- Phase: Single Phase AC Voltage
- kWatts: 9.00
- AC Voltage Required: 480
from Chromalox
Circular Blades. Steel Sheath Elements. Low Watt Density (12 and 18 W/In ²). 7.5 - 24 kW. 240 and 480 Volt, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. 12 ft. Riser (Other Lengths Available) [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 7.50 to 24.00
- AC Voltage Required: 240 to 480
- Watt Density: 12 to 18
from Trent, Inc.
Used for oil preheating, oil baths, wax and other heat transfer fluids. TRENT FO Series Fintube Heaters are designed to give years of trouble-free service when the tubes are completely covered with fluid, used on correct voltage and kept free of carbonization. TRENT FO Series Fintube Heater casings... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 240
- Maximum Operating (Sheath) Temperature: 550
- kWatts: 4.00
from Process Technology
Customer designed specifically for phosphate coating applications. FEATURES. For use in iron, zinc and manganese phosphate tanks. Schedule 40, heavy wall, 316 stainless steel sheath withstands scaling better than traditional heaters. Low watt densities up to 23 watts/square inch (3.5 w/cm ²)... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 230
- kWatts: 1.00 to 10.00
from OMEGA Engineering, Inc.
•. Rugged General Purpose Models-UL Listed and NEMA-1 Rated. •. Optional Moisture Tight/ Explosion Resistant Enclosure Available. •. Ideal for pH 6 to pH 8 Clean Liquids. •. 1.5 and 15 kW [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 15.00
- AC Voltage Required: 120 to 480
- Watt Density: 46 to 53
from Chromalox
Straight Blade. Steel Sheath Elements. Low Watt Density (12 and 18 W/In ²). 7.5 - 24 kW. 240 and 480 Volt, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. 12 ft. Riser (Other Lengths Available). Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 7.50 to 24.00
- AC Voltage Required: 240 to 480
- Watt Density: 12 to 18
from Process Technology
Compatible with many aggressive chemistries. FEATURES. Heavy wall fluoropolymer sheath (PTFE) covered stainless steel element reduces permeation. Low watt densities of 10 watts/square inch (1.5 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 6.00
- AC Voltage Required: 120 to 480
- Watt Density: 10
from OMEGA Engineering, Inc.
•. 1" Brass Screw Plug. •. Copper Sheath for Clean Water Applications. •. Integral Bulb and Capillary Thermostat — 3 Temperature Ranges Available. •. U.L. Listed with General Purpose NEMA-1 Rated Enclosure [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 240
- kWatts: 0.75 to 3.00
from Chromalox
Side Mount. Fluoropolymer Covered Stainless Steel Elements. 10 W/in ². 1 - 6 kW. 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. Third-party certifications: UL Listed, cUL [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 219
- kWatts: 1.00 to 6.00
from Process Technology
Durable, efficient chemical heater. FEATURES. 304 stainless, 316 stainless steel or titanium elements for use in most aqueous alkaline solutions and plating and phosphate tanks. Watt densities up to 35 watts/square inch (5.4 w/cm ²). Vapor resistant, flame retardant PVC terminal enclosure with... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- kWatts: 1.00 to 12.00
- AC Voltage Required: 120 to 600
- Watt Density: 35
from OMEGA Engineering, Inc.
The MT-1 series immersion heater is ideally suited for clean water requirements. Models are available with a general purpose terminal enclosure1 or a rugged moisture resistant explosion resistant terminal enclosure. [See More]
- Phase: Single Phase AC Voltage
- kWatts: 0.60 to 2.00
- AC Voltage Required: 120 to 240
- Watt Density: 43 to 86
from Chromalox
L-Shaped. Fluoropolymer Covered Stainless Steel Elements. 10 W/in ². 1 - 6 kW. 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. Third-party certifications: UL Listed, cUL [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 219
- kWatts: 1.00 to 6.00
from Process Technology
Small design to fit all size aquaculture applications. FEATURES. 316 stainless steel for fresh water or titanium for salt water applications. Available in Over the Side, L Shaped and Screwplug Styles. Watt densities up to 40 watts/square inch (6.5 w/cm ²). Vapor resistant, flame retardant... [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 6.00
- AC Voltage Required: 120 to 240
- Watt Density: 40
from OMEGA Engineering, Inc.
The OMEGALUX ® CH-SD Series features a compact 3 element heater design with a 2" brass screw plug. The Incoloy sheath allows compatibility with difficult clean liquids. A popular application for CH-SD Series is heating for industrial dishwashing equipment. Please Note: This immersion heater... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 5.00 to 10.00
- AC Voltage Required: 208 to 480
- Watt Density: 50
from Chromalox
Side Mount. Fluoropolymer Covered Stainless Steel Elements. 10 W/in ². Third-party certifications: UL Listed, CSA, CE. 1 - 6 kW. 120, 240 and 480 Volt, Single Phase. Moisture/Corrosion Resistant Terminal Enclosure. Third-party certifications: UL Listed, CSA, CE [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 219
- kWatts: 1.00 to 6.00
from Process Technology
Quick plug in system for aquaculture applications. 316 stainless steel for fresh water or titanium for salt water applications. Watt densities up to 40 watts/square inch (6.5 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 8.5 flexible cord/plug. P1 thermal... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- kWatts: 1.00 to 5.60
- AC Voltage Required: 100 to 480
- Watt Density: 40
from OMEGA Engineering, Inc.
Omegalux ® field adjustable screw plug immersion heaters can be applied to a variety of clean water and oil applications. The unique versatility of this design allows field adjustment of the rating by simple connections to the six elements of the heater. This simplifies selection and spare parts... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 300
- kWatts: 0.50 to 40.00
from Chromalox
L-Shaped. Fluoropolymer Covered Stainless Steel Elements. 10 W/in ². 1 - 6 kW. 120, 240 and 480 Volt, Single Phase. Moisture/Corrosion Resistant Terminal Enclosure. Third-party certifications: UL Listed, CSA, CE [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 219
- kWatts: 1.00 to 6.00
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Low watt densities of 18 watts/square inch (2.8 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 180
- kWatts: 0.50 to 6.00
from OMEGA Engineering, Inc.
•. Flange Sizes 3" to 5" of High Grade Steel. •. General Purpose, NEMA 1 Rated Enclosure or Moisture Resistant, Explosion Resistant † Enclosure Available. •. Sturdy 0.475"Diameter Copper Elements. •. 6 to 150 kW. •. 240 and 480 Vac Power, 1 and 3 Phase [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 6.00 to 150.00
- AC Voltage Required: 240 to 480
- Number of Elements: 6
from Chromalox
INCOLOY ® Sheath Elements W/In ²). Stainless Steel Riser (36 and 48"). 120, 240 and 480 Volt, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. For Corrosive Fluids. 2 Element 2 - 12 kW. 3 Element 3 - 18 kW. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 2.00 to 18.00
- AC Voltage Required: 120 to 480
- Watt Density: 40
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall metal sheaths available in steel, 304 stainless steel, 316 stainless steel and titanium. Low watt densities of 18 watts/square inch (2.8 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 180
- kWatts: 1.50 to 18.00
from OMEGA Engineering, Inc.
•. Heavy Duty for Severe Corrosive Solutions. •. 3-8 Inch 150 Ib. Steel Flange. •. 3 to 50 kW. •. Premium Grade Incoloy Sheath [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 3.00 to 50.00
- AC Voltage Required: 240 to 480
- Watt Density: 23
from Chromalox
Copper Sheath Elements (40 W/In ²). 304 SS Riser. 120, 240 and 480V, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. For Clean Water. 2 Element 2 - 12 kW. 3 Element 3 - 18 kW. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 2.00 to 18.00
- AC Voltage Required: 120 to 480
- Heater Type: Over the Side Heater
from Process Technology
Designed for safety and low maintenance. FEATURES. Automatic temperature protection is built in. Won't burn out due to air or scale exposure. 316 stainless steel for fresh water or titanium for salt water applications. Available in Over the Side, L Shaped and Axial Styles. Watt densities up to 40... [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 1.70
- AC Voltage Required: 100 to 240
- Watt Density: 40
from OMEGA Engineering, Inc.
Heavy coil construction — Watt density on the heating coil is designed for low watt density operation by increasing the coil diameter and length to give maximum coil surface area and limit coil surface temperature, providing longer coil life. [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 3.00 to 24.00
- AC Voltage Required: 240 to 480
- Watt Density: 15
from Chromalox
INCOLOY ® Sheath Elements (40W/In ²). Stainless Steel Riser (36 and 48"). 120, 240 and 480 Volt, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. For Corrosive Fluids. 2 Element 2 - 12 kW. 3 Element 3 - 18 kW. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 2.00 to 18.00
- AC Voltage Required: 120 to 480
- Watt Density: 40
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). 4 foot (1.2m) continuous fluoropolymer (PTFE) cable leading to a vapor resistant... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 1.00 to 6.00
from OMEGA Engineering, Inc.
•. Rugged Steel Sheath. •. Low Watt Density 6 1/2" W/in2. •. 1.2 to 8.4 kW. •. 3 & 5 Inch, 150 Ib. Steel Flange [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 1.20 to 8.40
- AC Voltage Required: 240 to 480
- Watt Density: 6.5
from Chromalox
Steel Sheath Elements (20 W/In ²). Steel Riser (36 and 48"). 120, 240 and 480V, 1 and 3 Phase. Moisture Resistant terminal Enclosure. For Medium Weight Oils & Degreasing Solutions. 2 Element 2 - 7 kW. 3 Element 3 - 10 kW. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 2.00 to 10.00
- AC Voltage Required: 120 to 480
- Watt Density: 20
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 1.00 to 6.00
from OMEGA Engineering, Inc.
bull;. Type E-2 Moisture Tight/Explosion Resistant Enclosure Standard*. •. 240 V Models Include an Integral 3 Phase Thermostat. •. 3" (8 cm) 150 lb (68 kg) Steel Flange. •. Low Watt Density Steel Sheath Elements Suitable for Heating Sump Oil. •. 3 to 6 kW. •. 240 and 480 V,... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 3.00 to 6.00
- AC Voltage Required: 240 to 480
- Watt Density: 23
from Chromalox
Stainless Steel Sheath Elements (40 W/In ²). Stainless Steel Riser (36 and 48"). 120, 240 and 480V, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. For Mildly Corrosive Fluids. 2 Element 2 - 12 kW. 3 Element 3 - 18 kW. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 2.00 to 18.00
- AC Voltage Required: 120 to 480
- Watt Density: 40
from Process Technology
Durable, efficient chemical heater. FEATURES. Heavy wall fluoropolymer sheath (PTFE) covered stainless steel element reduces permeation. Low watt density design 10 watts/square inch (1.5 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 1.00 to 18.00
from OMEGA Engineering, Inc.
• Long Life Heating Elements with Stainless Steel (8% Nickel) Sheath. • For Very Weak Solutions or Industrial Process Water. • Zinc Coated Steel Flange. • 6 to 72 kW. • 240 and 480 V, 1 and 3 Phase [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 6.00 to 72.00
- AC Voltage Required: 240 to 480
- Watt Density: 64 to 86
from Chromalox
Copper Sheath Elements (40 W/In ²). 304 Stainless Steel Riser. 120, 240 and 480V, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. For Clean Water. 2 Element 2 - 12 kW. 3 Element 3 - 18 kW. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 12.00 to 18.00
- AC Voltage Required: 120 to 480
- Watt Density: 40
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). 4 foot (1.2m) continuous fluoropolymer (PTFE) cable leading to a vapor resistant... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 1.00 to 6.00
from OMEGA Engineering, Inc.
Sturdy stainless steel .475" (1.2 cm) diameter elements, welded to steel flanges provide superior rigidity and strength. Heavy duty jumper straps and terminal parts assure permanent tightness of connections and an extra margin of current carrying capacity. Long life elements. High grade 304 series... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 3.00 to 36.00
- AC Voltage Required: 240 to 480
- Watt Density: 45
from Chromalox
Steel Sheath Elements (20 W/In ²). Steel Riser (36 and 48"). 120, 240 and 480V, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. For Medium Weight Oils & Degreasing Solutions. 2 Element 2 - 7 kW. 3 Element 3 - 10 kW. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 2.00 to 10.00
- AC Voltage Required: 120 to 480
- Watt Density: 20
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). 4 foot (1.2m) continuous fluoropolymer (PTFE) cable leading to a vapor resistant... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 1.00 to 6.00
from OMEGA Engineering, Inc.
Type TTSF heaters are used in industrial water boilers and storage tanks. They feature high watt density for rapid heat transfer. The steam boiler heaters feature the highest quality, high nickel Incoloy sheath that provides the highest practical protection available against hard water containing... [See More]
- Phase: Single Phase AC Voltage
- kWatts: 5.00 to 18.00
- AC Voltage Required: 208 to 480
- Watt Density: 49 to 184
from Chromalox
Stainless Steel Sheath Elements (40 W/In ²). Stainless Steel Riser (36 and 48"). 120, 240 and 480V, 1 and 3 Phase. Moisture Resistant Terminal Enclosure. For Mildly Corrosive Fluids. 2 Element 2 - 12 kW. 3 Element 3 - 18 kW. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 2.00 to 18.00
- AC Voltage Required: 120 to 480
- Watt Density: 40
from Process Technology
Designed for the most demanding chemical applications and to provide years of trouble-free performance. FEATURES. Constructed with our exclusive patented N2 “purged ” elements for extended service life. High efficiency in a compact design, and an excellent alternative for replacing strip... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 266
- kWatts: 0.50 to 12.00
from OMEGA Engineering, Inc.
•. GTF -- Side Mount. •. GTFL -- L-Shaped. •. Fluoropolymer Covered Stainless Steel Elements. •. 10 W/In2. •. 1- 6 kW. •. 120, 240 and 480 Volt, Single Phase. •. Moisture Resistant Terminal Enclosure [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 260
- kWatts: 1.00 to 6.00
from Chromalox
Steel Sheath Elements. 20 W/In ². 3, 4, 5, 6 and 7.5 kW. 240 and 480 Volt, Single Phase [See More]
- Phase: Single Phase AC Voltage
- kWatts: 3.00 to 7.50
- AC Voltage Required: 240 to 480
- Watt Density: 20
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). 4 foot (1.2m) continuous fluoropolymer (PTFE) cable leading to a vapor resistant... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 0.50 to 6.00
from OMEGA Engineering, Inc.
bull;. Integral Thermostat. •. General Purpose Enclosure NEMA-1 Rated. •. .475" (1cm) Diameter Copper Sheath. •. 3 to 18 kW. •. Dependable 3 Element Heater Design. •. 120, 208, 240 and 480 Vac Power; 1 and 3 Phase Models. •. Integral Thermostat. •. General Purpose... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 250
- kWatts: 3.00 to 18.00
from Chromalox
Round Cross Section Elements. Fluoropolymer Coated Stainless Steel Elements. 20 W/In ². 1 - 8 kW. 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. Third-party certifications: UL Listed, CSA [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 8.00
- AC Voltage Required: 120 to 480
- Watt Density: 20
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). 4 foot (1.2m) continuous fluoropolymer (PTFE) cable leading to a vapor resistant... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 0.50 to 9.00
from OMEGA Engineering, Inc.
The OMEGALUX ® MTS -2 Series process water immersion heater is available for applications with mild acid or alkaline conditions. The passivated stainless steel construction allows complete compatibility. [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 15.00
- AC Voltage Required: 120 to 480
- Watt Density: 46 to 51
from Chromalox
304 Stainless Steel, Titanium, Steel, Copper, and Carpenter 20 Sheath Elements. 5 - 7.5 kW. 20 - 44 W/In ². 240 Volt, Single Phase. Moisture Resistant Terminal Enclosure [See More]
- Phase: Single Phase AC Voltage
- kWatts: 5.00 to 7.50
- AC Voltage Required: 240
- Watt Density: 20 to 44
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 0.50 to 6.00
from OMEGA Engineering, Inc.
•. 1 1/4" NPT Steel Screw Plug. •. Steel Sheath Elements. •. 10 and 20 W/In2. •. 0.5 - 3 kW. •. Without Thermostat. •. 120 and 240 Volt, Single Phase. •. General Purpose or Moisture Resistant/ Explosion Resistant Terminal Enclosure [See More]
- Phase: Single Phase AC Voltage
- kWatts: 0.50 to 3.00
- AC Voltage Required: 120 to 240
- Watt Density: 10 to 20
from Chromalox
Passivated 316 Stainless Steel Sheath Elements. 1 - 9 kW. 21 - 34 W/In ². 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. UL Recognized [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 9.00
- AC Voltage Required: 120 to 480
- Watt Density: 21 to 34
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 0.50 to 9.00
from OMEGA Engineering, Inc.
•. 11/4" NPT Brass Screw Plug. •. Copper Sheath Element. •. 64 - 86 W/In2. •. 750 - 5,000 Watts. •. 120 and 240 Volt, Single Phase. •. Without Terminal Cover. •. Without Thermowell [See More]
- Phase: Single Phase AC Voltage
- kWatts: 0.75 to 5.00
- AC Voltage Required: 120 to 240
- Heater Type: Screw Plug / NPT Threaded
from Chromalox
Titanium Sheath Elements. 1 - 8 kW. 20 - 35 W/In ². 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. UL Recognized [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 9.00
- AC Voltage Required: 120 to 480
- Watt Density: 20 to 35
from Process Technology
Excellent chemical resistance to aggressive acids. FEATURES. PTFE sleeved 304 stainless elements inert to most solutions up to 212 °F (100 °C). Low watt density design 10 watts/square inch (1.5w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m)... [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 212
- kWatts: 0.50 to 9.00
from OMEGA Engineering, Inc.
•. Passivated Stainless Steel Sheath for Weak Corrosive Solutions. •. 0.75 to 3 kW. •. 120, and 240 Vac, 1 phase. •. Integral Thermostat [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 240
- kWatts: 0.75 to 3.00
from Chromalox
316 Stainless Steel Sheath Tubes. 40 W/In ². 1 - 12 kW. 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. Third-party certifications: UL Listed, cUL [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 219
- kWatts: 1.00 to 12.00
from Process Technology
Compatible with many aggressive chemistries. FEATURES. Heavy wall quartz sheath with replaceable metal element and polypropylene guards (complete assembly) . For use in most aqueous acidic plating solutions and pickling tanks. Watt densities up to 25 watts/square inch (4 w/cm ²). Vapor... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 600
- Maximum Operating (Sheath) Temperature: 230
- kWatts: 0.50 to 10.00
from OMEGA Engineering, Inc.
•. The Ideal Immersion Heater for Severe, Hard Water pH 5 to 9. •. Integral Thermostat. •. 2" NPT Stainless Steel Fitting with 2 Heating Elements. •. Available with NEMA-1 Rated General Purpose Enclosure, or Explosion Resistant Enclosure. •. 240 or 480 V, 1 Phase Power [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 240 to 480
- Maximum Operating (Sheath) Temperature: 250
- kWatts: 2.00 to 15.00
from Chromalox
316 Stainless Steel Sheath Tubes. 40 W/In ². 3 - 36 kW. 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. Third-party certifications: UL Listed, cUL [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 219
- kWatts: 3.00 to 36.00
from Process Technology
Excellent for laboratory and small tank applications. FEATURES. 304 stainless steel, 316 stainless steel or titanium provide protection from most chemistries. Low watt densities up to 40 watts/square inch (6.5 w/cm ²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- kWatts: 0.50 to 2.00
- AC Voltage Required: 120 to 480
- Watt Density: 40
from OMEGA Engineering, Inc.
•. Built-In Thermostat — Three Temperature Ranges Available. •. 1.5 to 6 KW. •. 120, 208 240 or 480 V, 1 Phase. •. Rugged, 2 Element Design. •. Premium Grade Steel Sheath. •. Lower Watt Densities for Heating Lightweight Oils [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 208 to 480
- Maximum Operating (Sheath) Temperature: 550
- kWatts: 2.00 to 6.00
from Chromalox
INCOLOY ® Sheath Elements Enclosed in Quartz Tube. 25 W/In ². 1 - 10 KW. 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. Third-party certifications: UL Listed, cUL [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 219
- kWatts: 1.00 to 10.00
from Process Technology
Heater cannot ignite plastic even if operated in air. FEATURES. Safety is built in, not added on. Heater self limits its maximum operating temperature to 482 °F (250 °C). This is lower than the ignition point of most plastics. Watt densities up to 26 watts/square inch (4 w/cm ²). Vapor... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 482
- kWatts: 1.00 to 6.00
from OMEGA Engineering, Inc.
•. Built in Thermostat — Three Temperature Ranges Available. •. Steel Sheath and Lower Watt Density for Heating Lightweight Oils. •. 208, 240 or 480 V 1 & 3 Phase [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 208 to 480
- Maximum Operating (Sheath) Temperature: 550
- kWatts: 3.00 to 9.00
from Chromalox
INCOLOY ® Sheath Elements Enclosed in Quartz Tube. 25 W/In ². 3 - 30 kW. 120, 240 and 480 Volt, Single Phase. Moisture Resistant Terminal Enclosure. Third-party certifications: UL Listed, cUL [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 180 to 219
- kWatts: 3.00 to 30.00
from Process Technology
Heater cannot ignite plastic even if operated in air. FEATURES. Safety is built in, not added on. Heater self limits its maximum operating temperature to 482 °F (250 °C). This is lower than the ignition point of most plastics. Watt densities up to 26 watts/square inch (4 w/cm ²). Vapor... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- AC Voltage Required: 120 to 480
- Maximum Operating (Sheath) Temperature: 482
- kWatts: 1.00 to 6.00
from OMEGA Engineering, Inc.
•. Built in Thermostat — Three Temperature Ranges Available. •. 0.25 to 0.50 kW. •. 120 and 240 V, 1 Phase. •. 0.315" Diameter Heavy Duty Steel Sheath. •. Lower Watt Density for Heating Light Weight Oils. •. Single Heating Element Design [See More]
- Phase: Single Phase AC Voltage
- AC Voltage Required: 120 to 240
- Maximum Operating (Sheath) Temperature: 240
- kWatts: 0.25 to 0.50
from Chromalox
1-1/4" NPT Brass Screw Plug. Copper Sheath Elements. High Watt Density (43 - 86 W/In ²). 1 - 2 kW. Intergral Thermostat (SPST). 120 and 240 Volt, Single Phase. General Purpose or Moisture Resistant/Explosion Resistant Terminal Enclosure. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.00 to 2.00
- AC Voltage Required: 120 to 240
- Watt Density: 43 to 86
from Process Technology
Heater cannot ignite plastic even if operated in air. FEATURES. Safety is built in, not added on. Heater self limits its maximum operating temperature to 482 °F (250 °C). This is lower than the ignition point of most plastics. Watt densities up to 26 watts/square inch (4 w/cm ²). Vapor... [See More]
- Phase: Single Phase AC Voltage; Three Phase AC Voltage (optional feature)
- AC Voltage Required: 100 to 480
- Maximum Operating (Sheath) Temperature: 482
- kWatts: 1.00 to 5.60
from OMEGA Engineering, Inc.
•. Rugged Steel Sheath for Use with Lightweight Oils. •. 1.5 to 6 kW. •. 120 280, 240 or 480V. 1 Phase. •. General Purpose1 NEMA-1 Rated and UL Listed Enclosure or Moisture Resistant/ Explosion Enclosure2 [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 6.00
- AC Voltage Required: 120 to 480
- Watt Density: 23 to 26
from Chromalox
2" NPT Brass Screw Plug. Copper Sheath Elements. High Watt Density (46 - 53 W/In ²). 1.5 - 15 kW. Integral Thermostat (DPST). 120, 208, 240 and 480 Volt, Single Phase. General Purpose Terminal Enclosure. Third-party certifications: UL Listed, CSA, cCSAus [See More]
- Phase: Single Phase AC Voltage
- kWatts: 1.50 to 15.00
- AC Voltage Required: 120 to 480
- Watt Density: 46 to 53