Component / Subsystem Laser Processing Equipment
from DigiKey
LASER HEAD (30989), 633NM, 2.0MW [See More]
- Type: Component or Subsystem
- Power: 0.0020
- Options / Components: Laser head or focusing module; HeNe Laser Heads
from Electro Optical Components, Inc.
Total transmission (1.5 m length): >70%. Maximum input power: 30 W CW. Minimal bending radius: 10 cm. Applications. A medical laser delivery system for transmission energy of laser to a surgical site of a patient. Used in: Stomatology, Urology, Proctology [See More]
- Type: Component or Subsystem
- Laser Type: CO2
- Options / Components: Laser Optics or Beam Delivery Components; FiberDelivery
from Suntech Applied Materials (Hefei) Co.,Ltd
Materials Ceramic Circuit Board is a high-performance electronic substrate made from ceramic materials, typically alumina (Al2O3), aluminum nitride (AlN).Features High Thermal Conductivity: Ceramic circuit boards offer superior heat dissipation compared to traditional PCB materials, making them... [See More]
- Type: Component or Subsystem
from CRYSTECH, Inc.
CRYSTECH based on the market demand for 1064nm Laser Medical Aesthetics and combined with the characteristics of Nd: YAG crystal materials, has designed and developed the 1064nm long pulse laser module. This product adopts a dual-lamp parallel pumping mode, with greater energy and longer service... [See More]
- Type: Component or Subsystem
- Workpiece Material: Medical; Treat Skin Pigmentary Disorders
- Options / Components: Laser Optics or Beam Delivery Components
from CASTECH, Inc.
Product description:The acousto-optic frequency shifter(AOFS) with RF driver is used to modify the frequency of the optical beam. Due to the Doppler shift, the frequency shift of 1st order diffracted light (variation quantity of wavelength) equals to the frequency of RF signal (wavelength). If the... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components
from CRYSTECH, Inc.
1535nm Laser Modules operate in the eye safe wavelength regime, and have great advantages in applications including Laser Ranging and LiDAR, This laser modules have stable pulse energy and excellent beam profile. The compact size makes it convenient for system installation. [See More]
- Type: Component or Subsystem
- Workpiece Material: Laser Range Finder, LiDAR, Meteorological Radar
- Options / Components: Laser Optics or Beam Delivery Components
- Laser Type: Pulsed
from CASTECH, Inc.
Product description:BBO Pockels cell is a laser device based on electro-optic effect. When a voltage is applied to the electro-optic crystal,the refractive index of the crystal will change and the phase difference caused by the birefringence of the polarized light transmitted along the optical axis... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting
- Options / Components: Laser Optics or Beam Delivery Components; FiberDelivery
from CRYSTECH, Inc.
Holmium laser (2100nm) is a type of laser. It uses yttrium-aluminum-garnet (YAG) as the activating medium and is produced by a pulsed solid-state laser device made of a laser crystal (Cr:Tm:Ho:YAG) doped with sensitizing ion chromium (Cr), energy-transferring ion thulium (Tm), and activating ion... [See More]
- Type: Component or Subsystem
- Workpiece Material: Medical; Urinary calculi, Prostatic hyperplasia, Bladder tumors
- Options / Components: Laser Optics or Beam Delivery Components
- Laser Type: NdYAG
from CASTECH, Inc.
Product description:Beam expander is an optical component built to enlarge the diameter of collimated input beam and reduce beam divergence. It is primarily applied in laser scanning, laser processing, interferometry and remote sensing. A typical Galilean type beam expander consists of one negative... [See More]
- Type: Component or Subsystem
- Workpiece Material: UVFS
- Options / Components: Laser Optics or Beam Delivery Components; Expander
from CRYSTECH, Inc.
CRYSTECH based on the market demand for 755nm laser hair removal and combined with the characteristics of self-produced Alexandrite crystal materials, has designed and developed the 755nm long pulse laser module. This product adopts a dual-lamp parallel pumping mode, with greater energy and longer... [See More]
- Type: Component or Subsystem
- Workpiece Material: Medical; Laser Hair Removal
- Options / Components: Laser Optics or Beam Delivery Components
from CASTECH, Inc.
Product description:F-theta lenses are often used in laser marking, laser engraving and laser cutting systems where constant scan rate and linear displacement are required. F-theta lenses are designed with a barrel distortion, and resulting a displacement that is linear with scanning angle.CASTECH... [See More]
- Type: Component or Subsystem
- Laser Operation: Marking; Kiss Cutting / Scribing
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: UVFS
from CRYSTECH, Inc.
Ceramic materials, as high-quality focusing cavity materials, due to their diffuse reflection characteristics, mechanical properties, and good chemical structural stability, have a more uniform irradiation light field on the laser working substance, and can form a uniform pump across the entire... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; ReflectIsolator
from CASTECH, Inc.
Product description:Faraday rotator provides non-reciprocal rotation while maintaining linear polarization. The plane of polarization will be rotated 45°when light transmits through the Faraday rotator in the forward direction and rotated additional 45°in the same relative direction with respect to... [See More]
- Type: Component or Subsystem
- Options / Components: Rotary Table / Rotary Axis; Laser Optics or Beam Delivery Components
from CRYSTECH, Inc.
A Diffractive Optical Element (DOE) is an optical component fabricated based on the principle of binary optics, which can precisely control the light intensity distribution of the light beam passing through it. Optical components made of DOE are widely used in the field of skin cosmetology, mainly... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components
from CASTECH, Inc.
Product description:Fiber-Free Space Isolators can be divided into two categories according to its output mode: non-expanded-beam isolator and expanded-beam isolator.Non-expanded-beam isolator consists of birefringent crystal, Faraday rotator, half-wave plate or polarizer and collimator.It's usually... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components
from CRYSTECH, Inc.
The Dye Laser is a kind of laser radiation generated with organic dyes as the medium. It is widely used in the treatment of vascular diseases in medical cosmetology, such as port-wine stains, hemangiomas, telangiectasia, rosacea, spider nevi, acne, scars, stretch marks, dark circles around the eyes,... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components
from CASTECH, Inc.
Product description:The fiber collimator is an important component of laser devices such as isolators and circulators. It is formed by precisely aligned the optical fiber and the focusing lens. It can not only collimate the beam output from the optical fiber but also couple the collimated beam into... [See More]
- Type: Component or Subsystem
- Laser Type: Fiber Laser
- Options / Components: Laser Optics or Beam Delivery Components; Collimator
- Power: 20 to 100
from CRYSTECH, Inc.
The honeycomb mirror, also known as the compound eye lens, is an optical element formed by a series of small lenses combined together. The laser beam passing through the honeycomb mirror will be rearranged to form a hexagonal lattice. This technology is widely used in the field of skin cosmetology,... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components
from CASTECH, Inc.
Product description:Free space isolators are divided into two categories: polarization dependent isolator and polarization independent isolator.The polarization dependent isolator, or Faraday isolator consists of three major parts which are input polarizer (polarized vertically),Faraday Rotator, and... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components
from Universal Laser Systems, Inc.
HPDFO – High Power Density Focusing Optics (HPDFO) uses a patented method to expand the laser beam within the focusing carriage. This expansion allows the beam to be focused into a much smaller focal spot, suitable for intricate, tight-tolerance engraving and for direct marking on some metals. [See More]
- Type: Component or Subsystem
- Laser Operation: Marking
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials
from WDI Wise Device Inc.
The ATF4 sensor provides an auto focusing servo system with fast feed back signals needed to accurately focus almost every type of infinity corrected microscopes. It projects a reference laser spot through the microscopes own objective lens. The sensor determines direction and measures the distance... [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining
- Options / Components: Monitoring System or Sensors
- Workpiece Material: Electronics / Wafers
from Precitec, Inc.
Cladding improves wear resistance and corrosion characteristics of a component or a component area. Therefore, the compact and solid cladding head YC30 is intended for fiber-guided laser in the medium to high powered range. Areas of application are e.g. repair welding of tools, turbine blades or... [See More]
- Type: Component or Subsystem
- Laser Operation: Forming , Cladding or Repair
from Hypertherm, Inc.
With nearly 3,000 part numbers, including laser optics and mirrors manufactured by II-VI Infrared, the Centricut CO2 laser consumables product line is one of the largest on the market. Centricut CO2 laser consumables are manufactured with Hypertherm precision and consistency delivering OEM quality... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components (optional feature)
from Trotec Laser, Inc.
The Atmos Cube forms a single unit with smaller laser machines and simultaneously functions as a support frame. It is suitable for applications with low dust levels. The Atmos exhaust system removes dust and gas created during laser processing and filters odors through its activated carbon filters,... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; PointingDiode; Exhaust systems
from AMADA Weld Tech
LW300AH ’s high-brightness design achieves significant increases in laser welding speed, and deeper penetration in laser weldable aluminum alloys: deep penetration, crack-free welds are possible using this innovative industrial laser design with weld speeds up to 3 times faster than... [See More]
- Type: Component or Subsystem
- Laser Operation: Welding
- Options / Components: Laser Optics or Beam Delivery Components; FiberDelivery; PointingDiode
- Laser Type: NdYAG; Pulsed
from MECCO
FARO ® ’s Xtreme 2-Axis Scan Heads provide XY deflection capability for all laser applications. Heads consist of two galvanometers, two mirrors, two servo amplifiers, and communication electronics. The synchronized actions of two turning mirrors direct the laser beam to specific locations... [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining; Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals
from Nutfield Technology
Nutfield Technolog y ’s 3XB Series 3-axis Scan Heads use a dynamic focusing system to produce a flat field rather than a f-theta lens. They are often used to create a large scan field with a relatively small spot. Various field and spot size combinations can be selected simply by turning a... [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining; Cutting; Marking; Kiss Cutting / Scribing
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Textile Cutting and Embossing, Solar Scribing, Laser Process Development
from Leister USA
Optional components for WS and BASIC AT •Integrated optical and clamping system •Glass sphere on air bearing •Pneumatic clamping device •Adjustable welding seam width [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from LaserStar Technologies Corporation
LaserStar Focus Heads provide exceptional beam quality while efficiently transferring the laser beam from the fiber cable to the focus head. Benefits include minimal spherical aberration, optimal beam spatial profile, and a precision beam diameter as small as 40 microns. LaserStar offers a wide... [See More]
- Type: Component or Subsystem
- Laser Operation: Welding
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from Cambridge Technology, Inc.
General Scanning Solutions brings you features never before available in a scan head family. Named Lightning Digital Scan Heads, its performance was defined as “Best in Class ” by our customers. It also offers you incredible design flexibility with modular design architecture and... [See More]
- Type: Component or Subsystem
- Laser Type: CO2; NdYAG
- Options / Components: Laser Optics or Beam Delivery Components (optional feature); Laser head or focusing module
from Universal Laser Systems, Inc.
Our exclusive line of patented CO2 Free-Space Gas Slab Lasers is designed specifically for the needs of laser cutting, engraving, graphic imaging and marking applications. Our lasers produce an excellent quality beam with even power distribution and good near and far field characteristics. We design... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Marble, Wood, Glass
from WDI Wise Device Inc.
The WDI Laser Auto-Focus ATF5 sensor is an active optical device (incorporating a semiconductor laser) designed to provide focusing servo systems with fast feedback signals needed to quickly and accurately focus all types of infinity corrected microscopes. [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining
- Options / Components: Monitoring System or Sensors
- Workpiece Material: Electronics / Wafers
from Precitec, Inc.
Cladding improves wear resistance and corrosion characteristics of a component or a component area. Therefore, the compact and solid cladding head YC52 is intended for fiber-guided laser in the medium to high powered range. Areas of application are e.g. repair welding of tools, turbine blades or... [See More]
- Type: Component or Subsystem
- Laser Operation: Forming , Cladding or Repair
from Trotec Laser, Inc.
The Atmos Duo Plus exhaust system is a stand-alone version with one turbine and two activated carbon comfort bags, perfect for odor-intensive applications and high levels of dust. The Atmos exhaust system removes dust and gas created during laser processing and filters odors through its activated... [See More]
- Type: Component or Subsystem
- Options / Components: Motorized Head, Guidance Module or Robotic Arm; Exhaust systems
from AMADA Weld Tech
The LW300A – 600A industrial laser welders are specifically designed for high speed seam laser welding applications. They feature high peak power and pulse stability to meet virtually any production laser welding application requirement. The lasers can be configured with up to four time or... [See More]
- Type: Component or Subsystem
- Laser Operation: Welding
- Options / Components: Laser Optics or Beam Delivery Components; PointingDiode
- Laser Type: NdYAG; Pulsed
from MECCO
The FARO Digi-Cube is a high precision, high scan rate, 10mm aperture digital servo controlled scan head that cost less than comparable lower performance analog models. Fully compatible with industry standard mounting interface, it is a high value alternative to lower performance products offered by... [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining; Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals
from Nutfield Technology
Nutfield Technology ’s Contour 3-Axis Scan Head is a compact scanning solution designed to offer 3-axis capability at cost comparable to 2-axis systems. The Contour includes a high bandwidth Z axis mechanism for marking on highly contoured surfaces. The fully packaged design allows for easy... [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining; Cutting; Marking; Kiss Cutting / Scribing
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Solar Scribing, Textile Cutting and Pattering
from Leister USA
Optional components for WS and BASIC AT •Line lengths 20 - 100 mm •Laser power up to 600 W •Very homogeneous energy density distribution due to special optics •Line lasers are equipped with their own intelligence [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from Cambridge Technology, Inc.
Cambridge Technology's Modular 3-axis scanning systems provide OEM customers with a flexible, compact and cost effective solution for custom integration needs, for Applications that require: Ultimate Flexibility. Custom Enclosures. Compact Solution. 3-Axis Modular Scanning Systems are available in 3... [See More]
- Type: Component or Subsystem
- Laser Type: CO2
- Options / Components: Laser Optics or Beam Delivery Components; Galvanometer
from Universal Laser Systems, Inc.
Our exclusive line of patented CO2 Free-Space Gas Slab Lasers is designed specifically for the needs of laser cutting, engraving, graphic imaging and marking applications. Our lasers produce an excellent quality beam with even power distribution and good near and far field characteristics. We design... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Marble, Wood, Glass
from WDI Wise Device Inc.
WDI's Laser Auto-Focus ATF6 sensor is an active optical device (incorporating a class II semiconductor laser) designed to provide focusing servo systems with fast feedback signals needed to quickly and accurately focus all types of infinity corrected microscopes. [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining
- Options / Components: Monitoring System or Sensors
- Workpiece Material: Electronics / Wafers
from Precitec, Inc.
The HP1.5 ″ cutting head is applied universally in modern sheet metal production in flatbed and pipe cutting systems with CO2 lasers. The proved cartridge change system makes switching pre-adjustable cartridges fast and easy and makes cutting alternating work piece gauge and types of material... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting
- Options / Components: Laser Optics or Beam Delivery Components
from Trotec Laser, Inc.
The Atmos Mono Plus exhaust system is a stand-alone version with one turbine and two activated carbon comfort bags, perfect for odor-intensive applications and medium levels of dust. Features such as monitor remote control, online filter exchange indicators, and more save the user valuable time... [See More]
- Type: Component or Subsystem
- Options / Components: Motorized Head, Guidance Module or Robotic Arm; Exhaust systems
from MECCO
FARO ® ‘s 3D-Contour is a scanning solution offering 3-axis capabilities in a compact package for small to medium field sizes. The integrated design features FARO ’s advanced galvanometer technology providing superior bandwidth, accuracy, and flexibility, and incorporates a high... [See More]
- Type: Component or Subsystem
- Laser Operation: 3D Laser Processing or 5-Axis Machining; Micromachining; Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals
from Nutfield Technology
Nutfield Technology ’s Laser Coder Kit gets you up and running quickly, providing an extensive feature set at minimal cost. Designed around the DPI 20W CO2 (Model N20-black), this laser coder kit offers standard 10 mm aperture, shutter, and red pointer, in a highly integrated compact head. [See More]
- Type: Component or Subsystem
- Laser Operation: Welding; Micromachining; Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module; Expander
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Surface Treatment, Industrial Processing
from Leister USA
Optional components for WS and BASIC AT •For rotationally symmetrical components •Multiple diameters available •Laser safety can be integrated into optical head [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from Cambridge Technology, Inc.
Cambridge Technology's Modular 3-axis scanning systems provide OEM customers with a flexible, compact and cost effective solution for custom integration needs, for Applications that require: Ultimate Flexibility. Custom Enclosures. Compact Solution. 3-Axis Modular Scanning Systems are available in 3... [See More]
- Type: Component or Subsystem
- Laser Type: CO2
- Options / Components: Laser Optics or Beam Delivery Components; Galvanometer
from Universal Laser Systems, Inc.
Our exclusive line of patented CO2 Free-Space Gas Slab Lasers is designed specifically for the needs of laser cutting, engraving, graphic imaging and marking applications. Our lasers produce an excellent quality beam with even power distribution and good near and far field characteristics. We design... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Marble, Wood, Glass
from WDI Wise Device Inc.
This is the only commercially available microscope guaranteeing transmission of more then 80% for all four YAG laser harmonics: 266, 355, 532, and 1064nm - without compromising the review channel fidelity. The MIC4 microscope is instrumental in laser repair of TFT arrays over the wavelength ranging... [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining
- Options / Components: Motorized Head, Guidance Module or Robotic Arm (optional feature); Laser Optics or Beam Delivery Components; Laser head or focusing module; Lens Focusing Head or Module; Linear Lens Changer
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Electronics / Wafers; PV Cell, Laser Micromachining, Photomask
from Precitec, Inc.
Finest contours - smooth cutting surfaces - no further processing necessary. Precitec's fine cutting system with integrated camera monitoring is used for high-precision applications. The outstanding beam quality of the beam source and the high imaging quality of the optical components are a... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from Trotec Laser, Inc.
The Atmos Nano exhaust system removes dust and gas created during laser processing and filters odors through its activated carbon filters, ensuring the safe and clean operation of your laser equipment. This model is compact and easy to transport, ideal for fiber laser applications with particularly... [See More]
- Type: Component or Subsystem
- Options / Components: Motorized Head, Guidance Module or Robotic Arm; Exhaust systems
from MECCO
FARO ® ’s 3D-Ultralight Scan Head is a 3-axis solution that delivers better field-size/spot-size ratios than those provided by standard f-theta scanning lenses. Offering different field and spot size combinations, the 3D-Ultralight ’s dynamic lens translator continuously adjusts the... [See More]
- Type: Component or Subsystem
- Laser Operation: 3D Laser Processing or 5-Axis Machining; Micromachining; Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals
from Nutfield Technology
Nutfield Technology ’s D-20 is a fully digital, encoder-based XY-axis scan head that is ideal for applications requiring the ultimate in accuracy and stability. High resolution encoders provide accuracy and insensitivity to environmental factors for a wide range of applications. Nutfield... [See More]
- Type: Component or Subsystem
- Laser Operation: Welding; Micromachining; Drilling; Kiss Cutting / Scribing
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Materials Processing, Surface Treatment, Laser Ablasion
from Leister USA
Optional components for WS and BASIC AT •Nearly any ring diameter •Welding seam width is selectable •Homogeneous energy distribution [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from Cambridge Technology, Inc.
Cambridge Technology ’s field-proven Dynamic Focusing Module provides the ultimate in flexibility. Whether your application requires a larger scanning field than can economically be provided by a F-theta lens, or a dynamically changing focal plane to follow contours, or to focus at varying... [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components (optional feature); Laser head or focusing module
from Universal Laser Systems, Inc.
Our exclusive line of patented CO2 Free-Space Gas Slab Lasers is designed specifically for the needs of laser cutting, engraving, graphic imaging and marking applications. Our lasers produce an excellent quality beam with even power distribution and good near and far field characteristics. We design... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Marble, Wood, Glass
from WDI Wise Device Inc.
Specifically to facilitate cell/module repair, the ATF5CM forces microscope to automatically focus on the surface of the glass where the TFT array is deposited (usually the bottom). This process will not be distracted by reflections from other surfaces within the light path such as the protective... [See More]
- Type: Component or Subsystem
- Laser Operation: Micromachining
- Options / Components: Monitoring System or Sensors
- Workpiece Material: Electronics / Wafers
from Precitec, Inc.
The FormWelder Plus welds spatially limited, flat parts quickly and precisely. The integrated X/Y axis system assumes the highly-dynamic and precise contour movement. Process monitoring also controls welding up to 100% on line. Thus, especially safety relevant components like gambrel sticks,... [See More]
- Type: Component or Subsystem
from MECCO
FARO ® ’s 3D-XB Scan Head is designed to deliver large field sizes (from 150mm to 2,000mm), without the use of f-theta lenses, XY tables, or gantries. This 3-axis technology provides better field-size/spot-size ratios than those of standard f-theta scanning lenses. With the 3D-XB Scan... [See More]
- Type: Component or Subsystem
- Laser Operation: 3D Laser Processing or 5-Axis Machining; Micromachining; Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals
from Nutfield Technology
A Nutfield Tech nology ’s Fiber Laser Scan Kit can turn your laser into a laser scanning system in less than half a day! When integrated with certain fiber lasers, our Fiber Laser Scan Kit streamlines the integration process, and provides support and service benefits of a single point of... [See More]
- Type: Component or Subsystem
- Laser Operation: Welding; Micromachining; Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Surface Treatment, Industrial Processing
from Leister USA
Optional components for WS and BASIC AT •Local pneumatic pressure without additional clamping device •Constant pressure distribution by swinging roller •Different models •Line width ranging from 3 - 30 mm [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from Universal Laser Systems, Inc.
Our exclusive line of patented CO2 Free-Space Gas Slab Lasers is designed specifically for the needs of laser cutting, engraving, graphic imaging and marking applications. Our lasers produce an excellent quality beam with even power distribution and good near and far field characteristics. We design... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Marble, Wood, Glass
from Precitec, Inc.
Features: integrated, non-contact, patented distance sensors. faster changing of focal lengths thanks to exchangeable cartridges. error signals if collision or cable breakage occurs or if measuring area tolerances are exceeded. magnetic protection if collision occurs (optional). water cooling system... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from MECCO
SMARTmark Systems - our configurable laser equipment focused on delivering "Simplified Marking And Real-time Traceability" - are most often chosen by customers because of the product's capabilities and quality, as well as the quality of the mark it produces. Providing an industrial solution for... [See More]
- Type: Complete or Turnkey System; Component or Subsystem
- Laser Operation: Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module; Lens Focusing Head or Module
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Electronics / Wafers
from Nutfield Technology
Nutfield Technology ’s QS-12 Open Frame 2-Axis Scan Head includes two galvanometers with mirrors mounted in optimized XY configuration, two servo amplifiers (require mounting to heat sink, not provided), and galvo-to-servo cable sets. Open frame heads are compact and provide flexibility for... [See More]
- Type: Component or Subsystem
- Laser Operation: Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module; Galvanometer
- Workpiece Material: Optical Coherence Tomography (OCT), Microscopy, Imaging, Materials Processing
from Leister USA
•Quasi-simultaneous or contour scanning •Laser beam focused to a spot •Great flexibility •Gap filling possible •High speed and high accuracy •Suitable for small series and mass productio [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from Universal Laser Systems, Inc.
Our exclusive line of patented CO2 Free-Space Gas Slab Lasers is designed specifically for the needs of laser cutting, engraving, graphic imaging and marking applications. Our lasers produce an excellent quality beam with even power distribution and good near and far field characteristics. We design... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Marble, Wood, Glass
from Precitec, Inc.
The DS 1.5" Cutting Head is designed for bevel cutting and for 3D applications in modern sheet metal processing with CO2 lasers. It can be used for the burr-free processing of corners, initial cuts, cut sections and radial edges, or for creating bevels in various angled positions. No reworking is... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting
- Options / Components: Laser Optics or Beam Delivery Components
from MECCO
The SMARTmark Large Enclosure is a Class 1 laser safety enclosure for your medium to large parts. It is also ideal for marking multiple parts at once. This system is easily customizable with removable side panels, side doors, pass-through and more. [See More]
- Type: Component or Subsystem
- Laser Operation: Marking
- Options / Components: Cabinet
- Z Travel / Width Capacity: 26
from Nutfield Technology
Nutfield Technology ’s QS-30 Open Frame 2-Axis Scan Head is comprised of two galvanometers with mirrors mounted in optimized XY configuration, two servo amplifiers (require mounting to heat sink, not provided), and galvo-to-servo cable sets. Open frame heads are used for fast and accurate beam... [See More]
- Type: Component or Subsystem
- Laser Operation: Marking
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module; Galvanometer
- Workpiece Material: Optical Coherence Tomography (OCT), Microscopy
from Leister USA
Optional components for WS and BASIC AT •Process monitoring and control •Measuring frequency 1 kHz •Temperature range 100° to 400 °C •Modular evaluation software [See More]
- Type: Component or Subsystem
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from Universal Laser Systems, Inc.
Our exclusive line of patented CO2 Free-Space Gas Slab Lasers is designed specifically for the needs of laser cutting, engraving, graphic imaging and marking applications. Our lasers produce an excellent quality beam with even power distribution and good near and far field characteristics. We design... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting; Marking
- Options / Components: Laser Optics or Beam Delivery Components
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Marble, Wood, Glass
from Precitec, Inc.
All-purpose cutting head with cartridge replacement system. The HP1.5" and HP2" Cutting Heads are used for modern sheet metal processing in flatbed and pipe-cutting systems. The time-tested cartridge replacement system enables the fast and simple replacement of the preadjustable cartridges and the... [See More]
- Type: Component or Subsystem
- Laser Operation: Cutting
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module
from MECCO
The Mini Enclosure has been specifically designed as a desktop solution with a small footprint for the most compact Class 1 enclosure. The "Start Mark" button and 5" of travel in the programmable Z axis make this enclosure a value packed, low-cost solution for small, one-piece workflow or trays of... [See More]
- Type: Component or Subsystem
- Laser Operation: Marking
- Options / Components: Cabinet
- Z Travel / Width Capacity: 5
from Nutfield Technology
Nutfield Technology ’s XLR8-10 Packaged 2-Axis Scan Head provides XY deflection capability for all laser applications. Heads consist of two QS-7 OPD galvanometers, two mirrors, two servo-amplifiers, and communication electronics. The synchronized actions of two turning mirrors direct the laser... [See More]
- Type: Component or Subsystem
- Laser Operation: Welding; Micromachining; Cutting; Marking; Kiss Cutting / Scribing
- Options / Components: Laser Optics or Beam Delivery Components; Laser head or focusing module; Galvanometer
- Workpiece Material: Conductive / Metals; Plastic, Wood, Composites or Other Non-Conductive Materials; Solar Scribing, Textile Cutting and Pattering, Surface Treatment