Double-ended Stepper Motors (rotary)

22 Results
Sealed Stepper Motor -- TorquePower™ TP23
from ElectroCraft

This 1.8 ° size 23 hybrid DC stepping motor is built with an extra-sturdy casing for when you need small, powerful torque with a little more durability. The motor is totally enclosed with permanently lubricated ball bearings. The bi-directional size 23 has a step angle accuracy of ±3%. [See More]

  • Shaft Orientation: In-line; Single-ended; Double-ended
  • DC Voltage Range: 34.0
  • Stepper Construction: Permanent Magnet
  • Current per Phase: 4
PM Motor -- PL25L-024-01/02 Series
from 3X Motion Technologies Co., Ltd

3X MOTION TECHNOLOGIES current annual manufactory capacity produces 1.8 million Hybrid Stepper Motors, 0.6 million DC-Brushless Motors, over 0.25 million DC-Brushed Motors, and 0.15 million Servo Motors through their production line, which includes automatic winding and welding machines. 3X Motion's... [See More]

  • Shaft Orientation: In-line; Double-ended
  • DC Voltage Range: 5.0
  • Stepper Construction: Permanent Magnet
  • Continuous Current: 0.0 to 0.4000
100 oz-in Min.Holding torque, NEMA size 23 Frame Hybrid Stepper Motor -- S9123M-D30
from Stock Drive Products & Sterling Instrument - SDP/SI

With so many Brushless (BLDC) Motor, Brushed (PMDC) Motor, Motor Controller, Gearmotor (PMDC), Gearhead, Actuator, Hybrid Stepper Motor, and AGV /AMR Gearmotor (BLDC) options available it can be tricky when selecting the best product or group of products for a specific application. To save you time... [See More]

  • Shaft Orientation: Double-ended
  • Step Angle: 1.80
  • Current per Phase: 1.78
  • Shaft Size: 0.250
Sealed Stepper Motor -- TorquePower™ TP34
from ElectroCraft

This 1.8 ° size 34 hybrid DC stepping motor is built with an extra-sturdy casing for when you need medium-sized, powerful torque with a little more durability. The motor is totally enclosed with permanently lubricated ball bearings. The bi-directional size 34 has a step angle accuracy of... [See More]

  • Shaft Orientation: In-line; Single-ended; Double-ended
  • DC Voltage Range: 34.0
  • Stepper Construction: Permanent Magnet
  • Current per Phase: 7.1
15Y Series High Torque Stepper Motor -- 15Y001D-LW4
from Anaheim Automation, Inc.

High step accuracy & resolution, low vibration & noise, can be customized [See More]

  • Shaft Orientation: In-line; Double-ended
  • Number of Leads: 4
  • Stepper Construction: Hybrid
  • Step Angle: 1.80
High-Torque Stepper Motors -- T
from Kollmorgen Corporation

The T Series is a set of custom T2 Series stepper motors that are factory-integrated with Kollmorgen Electric Cylinders, Rodless Actuators, and Precision Stages. These motors were selected to provide a range of compatibility with Kollmorgen ’s P7000 Series stepper drives. Features. T22: NEMA... [See More]

  • Shaft Orientation: In-line; Double-ended
  • Current per Phase: 0.7700 to 1.5
  • Stepper Construction: Hybrid
  • Holding Torque: 280 to 1250
Hybrid Stepper Motor -- 28HSD
from Jingjiang Nair Motion Technologies Co., Ltd.

JingJiang Nair Motion Technologies Co., Ltd.. have design, manufacturing and logistics facilities in China. They manufacture a wide range of DC gear motors, brushless DC motors and stepper motors which can be engineered to meet your exact requirements. They focus all of their product, application... [See More]

  • Shaft Orientation: In-line; Double-ended
  • Standard DC Voltage: 24V
  • Stepper Construction: Hybrid
  • DC Voltage Range: 24.0
Slimline Stepper Motor -- 6407
from SONCEBOZ Corporation

SONCEBOZ slimline stepper motors are flat actuators for instrument clusters. They present motion smoothness, low noise, robustness and cost efficiency. Sonceboz stepper motors have become a worldwide standard in this industry for instrument clusters. [See More]

  • Shaft Orientation: Double-ended; Offset / Parallel
  • Standard DC Voltage: 6V
  • Stepper Construction: Permanent Magnet
  • DC Voltage Range: 4.5 to 7.5
5-Phase Stepping Motor -- 103-4505-7010
from Sanyo Denki America, Inc.

5-phase stepping motor, 39mm square, 0.36 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • DC Voltage Range: 24.0
  • Standard DC Voltage: 24V
  • Current per Phase: 0.7500
High-Torque Stepper Motors -- T2
from Kollmorgen Corporation

Kollmorgen T2 Series stepper motors provide high torque in a NEMA 23 frame size (60 mm). With holding torques to 421 oz-in (3.0 N-m), these steppers deliver the most torque of any Size 23 motor. They are available with open leads or a terminal box, and offer an excellent alternative to pneumatic,... [See More]

  • Shaft Orientation: In-line; Double-ended
  • Current per Phase: 0.4000 to 6.6
  • Stepper Construction: Hybrid
  • Holding Torque: 421
5-Phase Stepping Motor -- 103-7566-7011
from Sanyo Denki America, Inc.

5-phase stepping motor, 60mm circular, 0.45 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • Holding Torque: 129
  • Current per Phase: 0.7500
  • Step Angle: 0.45
Stepper Motor -- POWERMAX II® M and P
from Kollmorgen Corporation

POWERMAX II ® motors are the most powerful steppers available, providing the highest torque per motor size and speed range These NEMA 23 (60 mm) motors are available in half-, single-, and two-stack configurations with holding torques from 42 to 253 oz-in. The M Series includes SIGMAX ®... [See More]

  • Shaft Orientation: In-line; Double-ended
  • Current per Phase: 1.3 to 6.5
  • Stepper Construction: Hybrid
  • Holding Torque: 42 to 253
5-Phase Stepping Motor -- 103H3505-7010
from Sanyo Denki America, Inc.

5-phase stepping motor, 28mm square, 0.72 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • DC Voltage Range: 24.0
  • Standard DC Voltage: 24V
  • Current per Phase: 0.7500
5-Phase Stepping Motor -- 103H5505-7010
from Sanyo Denki America, Inc.

5-phase stepping motor, 42mm square, 0.72 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • DC Voltage Range: 24.0
  • Standard DC Voltage: 24V
  • Current per Phase: 0.7500
5-Phase Stepping Motor -- 103H6500-7011
from Sanyo Denki America, Inc.

5-phase stepping motor, 50mm square, 0.72 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • DC Voltage Range: 24.0
  • Standard DC Voltage: 24V
  • Current per Phase: 0.7500
5-Phase Stepping Motor -- 103H7521-6020
from Sanyo Denki America, Inc.

5-phase stepping motor, 60mm circular, 0.72 °/step. CE marked. [See More]

  • Shaft Orientation: In-line; Double-ended
  • DC Voltage Range: 24.0
  • Standard DC Voltage: 24V
  • Current per Phase: 0.7500
5-Phase Stepping Motor -- 103H7521-7021
from Sanyo Denki America, Inc.

5-phase stepping motor, 60mm circular, 0.72 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • DC Voltage Range: 24.0
  • Standard DC Voltage: 24V
  • Current per Phase: 0.7500
5-Phase Stepping Motor -- 103H7851-7021
from Sanyo Denki America, Inc.

5-phase stepping motor, 60mm square, 0.72 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • Holding Torque: 92
  • Current per Phase: 0.7500
  • Step Angle: 0.72
5-Phase Stepping Motor -- 103H8581-6020
from Sanyo Denki America, Inc.

5-phase stepping motor, 86mm circular, 0.72 °/step. CE marked. [See More]

  • Shaft Orientation: In-line; Double-ended
  • Holding Torque: 292
  • Current per Phase: 0.7500
  • Step Angle: 0.72
5-Phase Stepping Motor -- 103H8581-7011
from Sanyo Denki America, Inc.

5-phase stepping motor, 86mm circular, 0.72 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • Holding Torque: 292
  • Current per Phase: 0.7500
  • Step Angle: 0.72
5-Phase Stepping Motor -- 103H89582-6020
from Sanyo Denki America, Inc.

5-phase stepping motor, 106mm circular, 0.72 °/step. CE marked. [See More]

  • Shaft Orientation: In-line; Double-ended
  • Holding Torque: 1529
  • Current per Phase: 0.7500
  • Step Angle: 0.72
5-Phase Stepping Motor -- 103H89582-7011
from Sanyo Denki America, Inc.

5-phase stepping motor, 106mm circular, 0.72 °/step. [See More]

  • Shaft Orientation: In-line; Double-ended
  • Holding Torque: 1529
  • Current per Phase: 0.7500
  • Step Angle: 0.72