Submersible Pumps Self Priming Pumps
from Pump Solutions Group
ALMATEC pneumatic diaphragm pumps of type AD 6 are a special development for laboratory applications and for sampling water from wells for continuous monitoring of the groundwater under landfills. They have a maximum delivery volume of 250 l/h which can be infinitely varied by adjusting the air... [See More]
- Pump Type: Diaphragm Pump; Submersible Pump; Utility Pump; Water Pump
from Godwin, a xylem brand
The GST Sub-Prime pumps are a family of portable, electric, submersible pumps designed for trash-laden applications. Standard side discharge and semi-vortex cast iron impeller enable these units to handle solids up to 1 in (25mm) in diameter. The fully removable volute makes it quick and easy for... [See More]
- Pump Type: Centrifugal Pump; Submersible Pump; Trash Pump; Water Pump
- Media: Abrasive, Ground Water
- Power Source: AC; 115 VAC
from Griffin Pump & Equipment, Inc.
Griffin Pump and Equipment Inc. offers a complete line of electric submersible pumps. Whether it is clean water, gray water, or trash laden effluent. Griffin can provide the right pump for your application. Electric submersible pumps are available for flows as low as a few gallons per minute to... [See More]
- Pump Type: Submersible Pump; Water Pump
- Media: Effluent, Ground Water, Liquids, Liquids with Solids, Potable Water
- Power Source: AC; 115 VAC, 230V to 460V, Three Phase, 230 VAC
from SEEPEX Inc.
SEEPEX semi-submersible pumps drain full containers, basins and barrels. They convey abrasive or corrosive conveying products with low to high viscosity. Individually sized and designed for the application, they are easy to maintain and have low operating costs. Overall, our semi-submersible pumps... [See More]
- Pump Type: Dewatering Pump; Drum Pump; Immersible Pump; Positive Displacement Pump; Progressing Cavity Pump; Submersible Pump; Wastewater Treatment Pump; Water Treatment Pump
- Discharge Pressure: 180.0
- Liquid Flow: 1300.0
- Discharge Size: 8.000
from Johnson Pump, An SPX Brand
Full-capacity, hand-powered bilge pump perfect for installation in tight spaces. This rugged, yet sleekly designed, single-chamber diaphragm pump provides first-rate performance and is a snap to install. It can be fitted in minutes from one side of the bulkhead with just four screws, self-sealing... [See More]
- Pump Type: Bilge Ballast Pump; Hand Foot Pump; Submersible Pump; Water Pump
- Discharge Pressure: 1.5
- Liquid Flow: 9.1 to 11.9
- Discharge Size: 0.984 to 1.496
from Versa-Matic Pump Co.
For a pump that handles mud, leaves, sand, and any solid up to 1.5" without clogging, get the SludgeMaster ™ air-driven high-flow pump. This trash pump operates at up to 300 gpm —our highest flow rate — runs on compressed air for continuous power supply. Weighing just 59 lbs, the... [See More]
- Pump Type: Centrifugal Pump; Dewatering Pump; Submersible Pump; Sump Pump; Water Pump
- Discharge Pressure: 28.0
- Liquid Flow: 300.0
- Discharge Size: 3.000
from Pump Solutions Group
The Pro-Flo X ™ is the latest innovation to the AODD pump world. The development of Wilden's Pro-Flo X ™ air distribution system (ADS) is derived from the Pro-Flo ® family and offers an alternative with operational flexibility never before seen. This flexibility is accomplished by... [See More]
- Pump Type: Submersible Pump
from Godwin, a xylem brand
The Godwin Heidra hydraulic submersible pumps are an extremely powerful, yet compact, pumps with flow capabilities up to 5,622 US GPM (1,277 m ³/hr) and discharge heads up to 164 ft (50 m). They have the ability to handle solids up to 3.7 in (95 mm) in diameter. With a liquid bath mechanical... [See More]
- Pump Type: Centrifugal Pump; Dewatering Pump; Submersible Pump; Trash Pump; Water Pump
- Discharge Pressure: 316.0 to 378.3
- Liquid Flow: 996.0 to 5622.0
- Discharge Size: 4.000 to 12.000
from Pump Solutions Group
The Pro-Flo X ™ is the latest innovation to the AODD pump world. The development of Wilden's Pro-Flo X ™ air distribution system (ADS) is derived from the Pro-Flo ® family and offers an alternative with operational flexibility never before seen. This flexibility is accomplished by... [See More]
- Pump Type: Submersible Pump
from Godwin, a xylem brand
The GSP Series Submersible pumps are available up to 2 hp (1.5 kW) and offers flow rates up to 140 US GPM (31.8 m ³/hr) and maximum heads to 70 ft (21.3 m). With a slimline top discharge design this pump works nicely for draining unwanted water from utility boxes, manholes, and other hard to... [See More]
- Pump Type: Centrifugal Pump; Submersible Pump; Water Pump
- Discharge Pressure: 90.0 to 149.9
- Liquid Flow: 70.0 to 140.0
- Power Source: AC; 115 VAC
from Pump Solutions Group
The Pro-Flo ™ patented air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air... [See More]
- Pump Type: Submersible Pump
from Pump Solutions Group
The Pro-Flo ™ patented air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air... [See More]
- Pump Type: Submersible Pump
from Pump Solutions Group
The Pro-Flo ™ patented air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air... [See More]
- Pump Type: Submersible Pump
from Pump Solutions Group
The Pro-Flo ™ patented air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air... [See More]
- Pump Type: Submersible Pump
from Pump Solutions Group
The Pro-Flo ™ patented air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air... [See More]
- Pump Type: Piston Plunger Pump (optional feature); Submersible Pump
from Pump Solutions Group
The Pro-Flo ™ patented air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air... [See More]
- Pump Type: Submersible Pump
from Pump Solutions Group
The Pro-Flo X ™ is the latest innovation to the AODD pump world. The development of Wilden's Pro-Flo X ™ air distribution system (ADS) is derived from the Pro-Flo ® family and offers an alternative with operational flexibility never before seen. This flexibility is accomplished by... [See More]
- Pump Type: Submersible Pump
from Pump Solutions Group
The Pro-Flo X ™ is the latest innovation to the AODD pump world. The development of Wilden's Pro-Flo X ™ air distribution system (ADS) is derived from the Pro-Flo ® family and offers an alternative with operational flexibility never before seen. This flexibility is accomplished by... [See More]
- Pump Type: Submersible Pump