Industrial Molding Compounds and Resins
from Cri-Tech, Inc.
66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors. [See More]
- Industry: Sanitary; OEM or Industrial
- Chemical System: Fluoropolymer
- Type: Elastomer
- Tensile (Break): 2200
from ELANTAS North America LLC
ELANTAS PDG, Inc., founded in 1919 and based in St. Louis, Missouri, is a premier global supplier of specialty resins for applications in the electrical and electronic industries. ELANTAS Electrical Insulation companies are respected as the market leaders in the development and manufacturing of wire... [See More]
- Industry: Aerospace; Electronics; OEM or Industrial; Tooling
- Chemical System: Epoxy
- Type: Thermally cured
- Filler: Mineral or Inorganic
from AGC Chemicals Americas, Inc.
AFLAS ® fluor elastomers are the material of choice for parts and components that need to perform reliably in the world ’s harshest environments. AGC formulated AFLAS resins from alternating polymers of tetrafluoroethylene and propylene to achieve unique properties over a conventional... [See More]
- Industry: Automotive; Electrical Power or High Voltage; Sanitary; OEM or Industrial
- Use Temperature: 518
- Type: Elastomer
- Tensile (Break): 1595 to 3336
from Victrex PLC
High performance thermoplastic material, 30% carbon fiber reinforced Poly Ether Ether Ketone (PEEK), semi crystalline, granules for injection molding, easy flow, FDA food contact compliant, color black. [See More]
- Industry: Aerospace; Automotive; Electronics; Sanitary; OEM or Industrial; Semiconductors or IC Packaging; Energy, Textile, Industrial, Food, Oil/Gas
- Chemical System: PEEK
- Type: Thermoplastic
- Filler: Carbon or Graphite
from Cri-Tech, Inc.
Cri-Line compounds are fully formulated high performance FKM compounds, developed, tested and guaranteed by Cri-Tech, Inc. [See More]
- Industry: OEM or Industrial
- Chemical System: Fluoropolymer
- Type: Elastomer
- Tensile (Break): 2640
from Cri-Tech, Inc.
Flexible, Fluoromaterial based Cri-plastMP F-TPE, F-TPX (XLFE e-beam crosslinkable) and F-TPVs are a family of melt-processable Fluoro – Thermoplastic Elastomers (F-TPEs) and Thermoplastic Vulcanizates (F-TPVs) developed to meet a wide range of applications including Wire & Cable, Fuel... [See More]
- Industry: OEM or Industrial; Fuel and Chemical Transfer, Wire & Cable, Consumer Goods, Tubing/sheet/film
- Chemical System: Fluoropolymer
- Type: Elastomer; Thermoplastic
- Tensile (Break): 700 to 2000
from Cri-Tech, Inc.
Cri-plastMP ™ PFA Electrically Conductive Compounds are formulated to meet your static dissipative/conductive, ATEX requirements in multiple applications. Specific grades can be processed by injection, extrusion, transfer molding, and compression molding. Superior static dissipative compounds... [See More]
- Industry: OEM or Industrial
- Chemical System: Fluoropolymer
- Type: Thermoplastic
- Features: Electrically Conductive Compound
from Esprix Technologies
PRODUCT CHARACTERISTICS. KetoprixTM EKT23G3C3 and EKT23G3C2 resins are thermoplastic aliphatic polyketone compounds containing the base 1,4-diketone polymer backbone structure with added fiber reinforcement and thermally conductive additives. Additional thermal stabilizers and lubricants are also... [See More]
- Industry: Automotive; OEM or Industrial
- Filler: Fiber Reinforcement and Thermally Conductive Additives
- Type: Thermoplastic
- Tensile (Break): 10153 to 13053
from 3M Advanced Materials Division
In 1969, astronauts boarded the Apollo 11 spacecraft wearing boots containing 3M ™ Dyneon ™ Fluoroelastomers. Today, these synthetic elastomeric materials are used in some of the toughest environments on earth. From hot-running automotive engines to harsh chemicals of semiconductor... [See More]
- Industry: Aerospace; Automotive; Electronics; Energy Conversion (Battery / Fuel Cell); Electrical Power or High Voltage; Marine; Sanitary; Military; Repair or Construction; OEM or Industrial; Semiconductors or IC Packaging; Oil &Gas Exploration
- Chemical System: Polypropylene; Polyamide; Fluoropolymer
- Type: Elastomer; Thermoplastic; Thermally cured; Optical
- Filler: Unfilled
from Bluestar Silicones USA Corp.
Properties. Viscosity 35000. Hardness Sha 13. Description. Bluesil V-1068 is a translucent, high strength, two component, tin catalyzed, room temperature cure silicone rubber. It is designed as a 14 Durometer (Shore A), very pourable low viscosity rubber providing excellent physical properties, long... [See More]
- Industry: Electronics; OEM or Industrial; Tooling
- Chemical System: Silicone
- Type: Elastomer
- Filler: Unfilled
from Idemitsu Chemicals USA Corporation
TARFLON ™ Polycarbonate thermoplastic products deliver exceptional impact strength and transparency. The stable performance of TARFLON ™ over a wide temperature range (-100C to 135C) makes it ideal for a wide variety of applications involving appliances, optical components such as light... [See More]
- Industry: Optoelectronics or Photonics; OEM or Industrial
- Chemical System: Polycarbonate
- Type: Thermoplastic; Optical
- Form / Shape: Pellets
from Wacker Chemical Corp.
SEMICOSIL ® 2M2M is Dimethoxydimethylsilane of high purity. Special features. high purity. low metal content. low chloride content. low methanol content. Application. SEMICOSIL ® 2M2M was developed for the semiconductor industry, e.g. as precursor for low dielectric constant interlayer... [See More]
- Industry: OEM or Industrial
from Real Seal Company
Engineered Thermoset Rubber Components. Rubber has its own unique array of available materials and associated properties, and can be produced in almost any conceivable configuration, including bonding to metal components. Rubber materials possess some physical properties that are superior to many... [See More]
- Industry: Automotive; Repair or Construction; OEM or Industrial; Tooling
- Filler: Unfilled
- Type: Elastomer; Thermally cured
- Form / Shape: Pellets
from MCG - Performance Polymers Division
MODIC ™ offers two technologies designed to be used as a tie-resin or for peelable purposes: MODIC ™ - ACID-GRAFTED POLYMER (TIE RESIN). MODIC ™ tie-layer resin is acid grafted polyolefin forming a layer or a coating which provides adhesion between materials that have poor... [See More]
- Industry: Automotive; Sanitary; OEM or Industrial
- Chemical System: Polypropylene; Thermoplastic Polyester (PET, PBT, etc.); Polycarbonate; Polyethylene
- Type: Thermoplastic
from Hapco, Inc.
HIGH PERFORMANCE HYBRID ELASTOMERIC POLYMER ALLOYS. The Hapflex ™ 1000 Series products are soft, colorless, Shore A elastomers. These materials are available in both a fast and slow gel time and can also be combined to yield customized gel times without the addition of heat. Hapflex ™... [See More]
- Industry: Electronics; OEM or Industrial; Tooling
- Chemical System: Polyurethane
- Type: Elastomer
- Filler: Unfilled
from Idemitsu Chemicals USA Corporation
Offering more strength and ductility than the WA grades, the N WA grades have been formulated with Nylon 66 to create a unique blend that offers strength and ductility, in the complex tool designs frequently encountered underhood in automotive USCAR class 3 and 4 environments. The N WA7020-02 and N... [See More]
- Industry: Automotive; OEM or Industrial
- Chemical System: Polyamide; Styrene or Polystyrene
- Type: Thermoplastic
- Filler: Glass or FRP; Nylon
from MCG - Performance Polymers Division
VINIKA ™ is the brand name for vinyl compounds, including soft (PVC-P) and rigid (PVC-U) solutions. The flexible PVC-P range includes phthalate and phenol free solutions with low VOC (Volatile Organic Content) and the rigid PVC-U line is lead free formulated. ENHANCED SOLUTIONS FOR SPECIFIC... [See More]
- Industry: Automotive; Electronics; Electrical Power or High Voltage; Repair or Construction; OEM or Industrial
- Chemical System: Vinyl / PVC
- Type: Thermoplastic
- Features: Flame Retardant
from Hapco, Inc.
HIGH PERFORMANCE HYBRID ELASTOMERIC POLYMER ALLOYS. The Hapflex ™ 500 Series offers soft durometer elastomers ranging from 45 - 95 Shore A. All are relatively fast, room curing, flexible systems that can be accelerated with moderate heat for faster cycle times. Most 500 Series products are... [See More]
- Industry: OEM or Industrial; Tooling
- Chemical System: Polyurethane
- Type: Elastomer
- Filler: Unfilled
from Idemitsu Chemicals USA Corporation
Lower dielectric heating than PPS due to low dissipation factor. Easier processing than PPS. Lower cost than PPS. Application Requirements: Heat and chemical resistance. Dimensional stability for part flatness. [See More]
- Industry: Electronics; OEM or Industrial
- Chemical System: Styrene or Polystyrene
- Type: Thermoplastic
- Filler: Glass or FRP
from Hapco, Inc.
HIGH PERFORMANCE HYBRID ELASTOMERIC POLYMER ALLOYS. The Hapflex ™ 600 series are relatively fast, semi-rigid, room temperature curing systems. This series yields harder durometers ranging from 50 - 70 Shore D. Most. 600 Series products are offered in 2 speeds: a standard 20-25 minute working... [See More]
- Industry: OEM or Industrial; Tooling
- Chemical System: Polyurethane
- Type: Elastomer
- Filler: Unfilled
from Idemitsu Chemicals USA Corporation
Material: Xarec WA210. Better humidity resistance than PBT or Nylon. Better dimensional stability than PBT or Nylon. Faster cycle time and easier flow in tools than PBT. Lighter weight than PBT. Application Requirements: USCAR Class 3 heat and humidity resistance. Dimensional tolerance accuracy for... [See More]
- Industry: Automotive; OEM or Industrial
- Chemical System: Styrene or Polystyrene
- Type: Elastomer; Thermoplastic
- Filler: Glass or FRP
from Hapco, Inc.
HIGH PERFORMANCE HYBRID ELASTOMERIC POLYMER ALLOYS. Hapflex ™ 700/800 products are colorless, high strength elastomers available in hardnesses ranging from 65A to 72D. Hapflex ™ 700/800 products exhibit high tensile strength, high tear strength, and excellent elongation. All Hapflex... [See More]
- Industry: Electronics; OEM or Industrial; Tooling
- Chemical System: Polyurethane
- Type: Elastomer
- Filler: Unfilled
from Idemitsu Chemicals USA Corporation
Material: Xarec WA550. Better chemical resistance to transformer oils than PET. Better hydrolytic stability (no drying) than PET. Easier to process than PET. Application Requirements: Chemical resistance. Good dimensional [See More]
- Industry: Automotive; OEM or Industrial
- Chemical System: Styrene or Polystyrene
- Type: Elastomer; Thermoplastic
- Filler: Glass or FRP
from Hapco, Inc.
Hapsil 360 ™ is a high tear strength, tin-catalyzed RTV-2 silicone rubber, which was designed for casting Hapco's wide variety of rigid and flexible polyurethane resins. Hapsil 360 ™ is not sensitive to inhibition, meaning it will cure at room temperature over virtually any surface. [See More]
- Industry: OEM or Industrial; Tooling
- Chemical System: Silicone
- Type: Elastomer
- Filler: Unfilled
from Hapco, Inc.
Solid Reaction Injection Molding. S-RIM ™ is a series of advanced casting resins that exhibit high physical properties and are extremely fast curing. Easy to mix with a 1:1 ratio by volume. Available in black or natural/tan. Available in 60 or 240 second gel time. 6260/61 can be de-molded in... [See More]
- Industry: OEM or Industrial; Tooling
- Form / Shape: Liquid
- Filler: Unfilled
- Viscosity: 600
from Hapco, Inc.
Tuffalloy ™ is an advanced chemistry developed by Hapco to meet today ’s market demands for prototype and low production parts that mimic the physical attributes of many injection molding materials. Tuffalloy ™ 4270 Series. Tuffalloy ™ 4270 series are low viscosity Liquid... [See More]
- Industry: OEM or Industrial; Tooling
- Form / Shape: Liquid
- Filler: Unfilled
- Viscosity: 250 to 350