Sheet Aluminum and Aluminum Alloys
from Arnold Magnetic Technologies
Thin-rolled aluminum and aluminum alloys from Arnold Precision Thin Metals (PTM) are versatile and lightweight and are used in a variety of electrical products packaging and other applications. Aluminum is often the best solution when reduced weight, good conductivity, and high formability are... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Foil; Sheet; Strip
- Width / OD: 4.25 to 17.5
- Thickness: 1.00E-4 to 0.0250
- Features: Wrought
from Aleris International, Inc.
Aleris is one of the leading suppliers of common alloy aluminum bare sheet made from recycled aluminum via two different methods: direct-chill and continuous-cast. The Aleris direct-chill casting facility is located in Lewisport, Kentucky, while our continuous casting mini-mills are located in... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Coil Stock; Coated; Sheet
- AA Grade: 1100
- Type: Pure / Low Alloy
- Specifications: AA / IADS; EN
from Kloeckner Metals Corporation
Kloeckner Metals, along with its subsidiary company Temtco Steel are ‘reliable partners ’ to more than 8,000 metalworking businesses throughout the United States. Through these partnerships, the Company uses its technological, commercial, operational, and financial resources to meet the... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Width / OD: 36 to 60
- Specifications: ASTM / ASME
- Length: 96 to 120
from Trinity Brand Industries
Considered commercially pure, Alloy 1100 is 99% aluminum and is an excellent conductor of heat and electricity. It offers excellent corrosion resistance and is easily welded and brazed. Not heat treated, Nonmagnetic. Market Applications: Chemical Equipment, Heat Exchanger Fins, Sheet Metal work,... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Thickness: 0.0200
from United Performance Metals
Alloy 263 is a Ni-Co-Cr-Mo-Ti-Al precipitation-hardenable alloy. 263 is furnished in the solution-treated condition unless otherwise specified. It exhibits high strength, corrosion resistance, excellent formability, ductility, and weldability. This alloy is normally used for applications up to 1650... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- Specifications: AMS; UNS
- Type: Aluminum Alloy
- Thickness: 0.1770 to 0.2400
from H.M. Hillman Brass & Copper
Width and length specified by client [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet
- UNS A: 61400
- Type: Aluminum Alloy; CladBimetal
- Specifications: ASTM / ASME; UNS; ASME-SB-169
from Alcoa North American Rolled Products
2024 Aluminum Alloy Sheet and Plate. Description. Alloy 2024 was introduced by Alcoa in 1931 as an alclad sheet in the T3 temper. It was the first Al-Cu-Mg alloy to have a yield strength approaching 50,000-psi and generally replaced 2017-T4 (Duralumin) as the predominant 2XXX series aircraft alloy. [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Plate; Sheet
from Alcoa North American Rolled Products
5xCE1. This aluminum alloy has a superior anodizing quality that can match any color need. The finishing quality of this alloy is exceptional and can be finished in a variety of textures. Pre-polished/mirror finish is also available in coil form so there is no need to take an extra step in the... [See More]
- Shape / Form: Semi-finished, Mill Stock or Near Net Shapes; Sheet