Tube End / Hose Nipple Flow Meters
from Eldridge Products, Inc.
MP Series flow meters are approved for use in hazardous locations (see specifications). Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow inlet tube. Our insertion style... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
The flow meters red-y compact series are characterized by powerful technology, intelligent functions, and innovative design.The instruments offer a new level of ease of use: compact design with battery power, portable, clear digital display and optional smart alarm functions. (totalizer and 24 Vdc... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Litre Meter Limited
Low cost, plastic bodied Pelton Wheel flowmeter with push-on hose connections, providing a pulse output. [See More]
- End Fittings: In-line Clamp (optional feature); Compression (optional feature); In-line Flanged (optional feature); Plain End (optional feature); Socket Weld / Union (optional feature); In-line Threaded (optional feature); Tube End/Hose Nipple; Hub, Graylock etc
- Pipe Diameter: 0.00
- Meter Technology: Piston; Paddlewheel; Turbine
- Mounting: In-line
from Malema Sensors
The CPFM Series 8800 is a family of advanced flow meters based on the Coriolis principle fabricated exclusively from PFA* (Perfluoroalkoxy) polymeric material. Series 8800 flow meters are comprised of two assemblies: one containing the sensor, the other containing the supporting electronics. Series... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.38
- Meter Technology: Coriolis
- Mounting: In-line
from OMEGA Engineering, Inc.
The OMEGA ® FTB600B Series Flowmeters feature an infrared, electro-optical transmitter and receiver molded into the flowmeter ’s body, along with two miniature circuit boards to provide voltage stabilization and automatic IR output level control. The FTB600B automatically compensates IR... [See More]
- End Fittings: In-line Threaded; Tube End/Hose Nipple
- Mounting: In-line
- Pipe Diameter: 0.50 to 1.25
- Process Media Type: Liquid; Gas
from Bionetics
Rheotherm low gas flow meters provide an easy-to-use technology for measuring gas flow in small lines - typically 1" or smaller at flow rates from a few hundred SCFM down to 25 SCCM. (For flow measurement in larger pipes and ducts, click here). These meters give a repeatable reading in mass or... [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded (optional feature); Tube End/Hose Nipple; Sanitary
- Pipe Diameter: 0.06 to 1.00
- Meter Technology: Thermal
- Mounting: In-line
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow inlet tube. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. Tube... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
The flow meters red-y compact series are characterized by powerful technology, intelligent functions, and innovative design.The instruments offer a new level of ease of use: compact design with battery power, portable, clear digital display and optional smart alarm functions. (totalizer and 24 Vdc... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Malema Sensors
The M-2511 is an integrated flow measuring solution in a small package. The M-2511 utilizes the latest high-speed digital signal processing (DSP) technology to provide a cost effective flow measuring solution with minimal compromise in performance. The flow sensor is a U or Z shaped PFA tube with no... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.25 to 0.50
- Meter Technology: Ultrasonic
- Mounting: In-line
from OMEGA Engineering, Inc.
FL-30000 Series flow meters use a pitot tube pickup and a hard-edged float design to provide a convenient and economical means of measuring water flow in a closed pipe system. A one-piece, impact-resistant machined acrylic body offers the strength and long service required in most commercial and... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 1.00 to 8.00
- Meter Technology: Pitot Tubes
- Mounting: In-line
from Bionetics
Rheotherm flow meters are an excellent, and often times the only choice for reliable liquid flow measurement at low flow rates. For flow rates from 1 gallon/year (10 cc/day) to a few GPM, they provide repeatable liquid flow measurement with little or no maintenance. Options for hazardous locations... [See More]
- End Fittings: In-line Flanged (optional feature); In-line Threaded (optional feature); Tube End/Hose Nipple; Sanitary
- Pipe Diameter: 0.06 to 1.00
- Meter Technology: Thermal
- Mounting: In-line
from Eldridge Products, Inc.
MP Series flow meters are approved for use in hazardous locations (see specifications). Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow inlet tube. Our insertion style... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
The flow meters red-y compact series are characterized by powerful technology, intelligent functions, and innovative design.The instruments offer a new level of ease of use: compact design with battery power, portable, clear digital display and optional smart alarm functions. (totalizer and 24 Vdc... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Malema Sensors
Tangential turbine flow meters continue to be the most common way to measure flow electronically in a wide range of industries. Enhancements to tangential turbine flow meter systems are producing a flow-sensing device that is smaller, easier to install, and more accurate than ever before. Malema... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.25 to 1.00
- Meter Technology: Paddlewheel
- Mounting: In-line
from OMEGA Engineering, Inc.
The FTB300 Series of digital paddle wheels are an economical choice for low flow rate applications. They use Infra-red light beam technology. Available connections include 1/8 FNPT, 1/4 FNPT and 3/8" OD tube fittings. Six available flow ranges as low as 30ml/min to 7000 ml/min. No display models... [See More]
- End Fittings: In-line Threaded; Tube End/Hose Nipple
- Mounting: In-line
- Pipe Diameter: 0.12 to 0.38
- Process Media Type: Liquid
from Eldridge Products, Inc.
MPNH Series flow meters are approved for use in ordinary locations (see specifications). Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow inlet tube. Our insertion style... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
Reliable technology and industry standard interfaces make the red-y smart series thermal mass flow meters and controllers particularly suitable for measurement and control in gas delivery systems and plant engineering applications. High accuracy, Analog and Digital, free software and program... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Malema Sensors
The M-1500P Series with DSP Technology consists of an inline primary flow sensor and externally mounted controller unit. The flow sensor is a straight - through flow tube that uses ultrasonic sensing technology to measure the flow rate. The Controller Electronics receives the raw flow rate signal... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.12
- Meter Technology: Ultrasonic
- Mounting: Non-Invasive
from OMEGA Engineering, Inc.
FPR1501 Series flow sensors can measure extremely low flow rates from 15 mL/min. They are suitable for a wide variety of industrial, commercial, and laboratory flow applications. Because the FPR1501 flow sensors have only PTFE and sapphire wetted surfaces, it is anticipated that they will replace... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.12 to 0.38
- Meter Technology: Turbine
- Mounting: In-line
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
Reliable technology and industry standard interfaces make the red-y smart series thermal mass flow meters and controllers particularly suitable for measurement and control in gas delivery systems and plant engineering applications. High accuracy, Analog and Digital, free software and program... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Malema Sensors
The M-1800 series consists of an inline flow sensor and electronics in one package. The flow sensor is a straight-through PFA tube that uses ultrasonic sensing technology to measure the flow rate. The M-1800 utilizes the latest digital signal processing (DSP) technology and provides cost effective... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.12 to 0.25
- Meter Technology: Ultrasonic
- Mounting: In-line
from OMEGA Engineering, Inc.
The FMA3100/3300ST Series will precisely measure flow rates of virtually any clean, dry gas as low as 0.4 to 20 SCCM or as high as 10 to 500 SLPM, including hydrogen. Repeatable results are achieved by utilizing a thermal mass flow measurement sensor design. This proven design minimizes zero drift... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.12 to 0.50
- Meter Technology: Thermal
- Mounting: In-line
from Eldridge Products, Inc.
MP Series flow meters are approved for use in hazardous locations (see specifications). Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
Reliable technology and industry standard interfaces make the red-y smart series thermal mass flow meters and controllers particularly suitable for measurement and control in gas delivery systems and plant engineering applications. High accuracy, Analog and Digital, free software and program... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Malema Sensors
The M-2111 Series flow detector has non-contact transducers and a PFA flow tube design without dead pockets. Its advanced signal converter with DSP electronics offers unmatched flow measurement capabilities even in tough applications. The M-2111 is an ideal choice for use in the semiconductor... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.25 to 1.00
- Meter Technology: Ultrasonic
- Mounting: In-line
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
The flow meters red-y compact series are characterized by powerful technology, intelligent functions, and innovative design.The instruments offer a new level of ease of use: compact design with battery power, portable, clear digital display and optional smart alarm functions. (totalizer and 24 Vdc... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Malema Sensors
The VF-8100 consists of an inline flow sensor and electronics in one package. The flow sensor is a straight-through PFA tube that uses ultrasonic sensing technology to measure the flow rate. There are no moving parts or mechanical seals. The VF-8100 is an ideal choice for use in the semiconductor... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.38 to 1.00
- Meter Technology: Vortex (Shedding) Meter
- Mounting: In-line
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
The flow meters red-y compact series are characterized by powerful technology, intelligent functions, and innovative design.The instruments offer a new level of ease of use: compact design with battery power, portable, clear digital display and optional smart alarm functions. (totalizer and 24 Vdc... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 1/2 ″, 3/4 ″, or 1 ″ OD probes. [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.50 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
The flow meters red-y compact series are characterized by powerful technology, intelligent functions, and innovative design.The instruments offer a new level of ease of use: compact design with battery power, portable, clear digital display and optional smart alarm functions. (totalizer and 24 Vdc... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Eldridge Products, Inc.
Eldridge Products, Inc. has achieved innovation and excellence in thermal dispersion gas mass flow measurement since 1988. With an economical set of features and a number of common configuration and installation choices, our newest ValuMass ™ flow meters continue our tradition of solving flow... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.25 to 2.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
The flow meters red-y compact series are characterized by powerful technology, intelligent functions, and innovative design.The instruments offer a new level of ease of use: compact design with battery power, portable, clear digital display and optional smart alarm functions. (totalizer and 24 Vdc... [See More]
- End Fittings: Compression; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 1.00
- Meter Technology: Rotameter; Thermal
- Mounting: In-line
from Eldridge Products, Inc.
Insertion style thermal mass flow meters include a sensor & probe assembly that is inserted into the process gas flow conduit to allow the process gas to flow across the flow sensing elements. Our insertion style flow meters are available with 3/4 ″, or 1 ″ OD probes. Tube fittings... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.75 to 1.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
Reliable technology and industry standard interfaces for rough environments:Our tried and tested thermal mass flow meters and controllers for gases now available as IP67?/?NEMA 6 version. red-y industrial devices come along with ATEX certification (Category 3?/?Zone 2 & 22) [See More]
- End Fittings: Compression; In-line Flanged; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 2.00
- Meter Technology: Thermal
- Mounting: In-line
from Eldridge Products, Inc.
Multipoint Systems are designed to measure gas flows where two or more sensing points are required due to large cross-sectional areas, such as large air intake ducts or air exhaust and flue stacks. Our Series 9000MP Multipoint Systems are installed throughout the world, providing our customers with... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 1.50
- Meter Technology: Thermal
- Process Media Type: Gas
from Vogtlin Massflow USA
Reliable technology and industry standard interfaces for rough environments:Our tried and tested thermal mass flow meters and controllers for gases now available as IP67?/?NEMA 6 version. red-y industrial devices come along with ATEX certification (Category 3?/?Zone 2 & 22) [See More]
- End Fittings: Compression; In-line Flanged; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 2.00
- Meter Technology: Thermal
- Mounting: In-line
from Eldridge Products, Inc.
Our ValuMass ™ Series 400 offer another lower cost option for many flow applications with the high value associated with all of EPI ’s flow measurement instrumentation. ValuMass ™ flow meters include a robust feature set: 0 – 5, 10 VDC, 4 – 20mA, RS485 Modbus RTU and... [See More]
- End Fittings: Tube End/Hose Nipple
- Pipe Diameter: 0.25 to 2.00
- Meter Technology: Thermal
- Mounting: Insertion
from Vogtlin Massflow USA
Reliable technology and industry standard interfaces for rough environments:Our tried and tested thermal mass flow meters and controllers for gases now available as IP67?/?NEMA 6 version. red-y industrial devices come along with ATEX certification (Category 3?/?Zone 2 & 22) [See More]
- End Fittings: Compression; In-line Flanged; Plain End; Socket Weld / Union; In-line Threaded; Tube End/Hose Nipple; VCO® / VCR®; Push-in Fittings
- Pipe Diameter: 0.03 to 2.00
- Meter Technology: Thermal
- Mounting: In-line