T 20mm Timing Belts (metric)
from Hangzhou Chinabase Machinery Co., Ltd.
The pitch &tooth type of double sided timing belt is same as synchronous belt. There are two kinds of double sided timing belt - DA type: Arrangement symmetrical ( see section a); DB type: Arrangement overlapping ( see section b) [See More]
- Metric Pitch: T 2.5mm; T 5mm; T 10mm; T 20mm; HTD 8mm; S 2mm; S 3mm; S 4.5mm; S 5mm; S 8mm; S 14mm; 14M, RP14M
- Features: Double-Sided
from Hangzhou Chinabase Machinery Co., Ltd.
All specification and types of timing belt can be produced;so do other specification and types. of timing belt not listed in this table. For particular specification belt,we can make according to the clients' supplying drawing or. sample after negotiation. Timing belts' width can be adjusted as... [See More]
- Metric Pitch: T 2.5mm; T 5mm; T 10mm; T 20mm; AT 5mm; AT 10mm; AT 20mm
from US Timing & Conveyor
Pin Splice. We pin splice up to 50mm wide [See More]
- Metric Pitch: T 10mm; T 20mm; AT 10mm; AT 20mm
- Reinforcement: Kevlar® (optional feature)
- Belt Width: 25 to 100
from SKF/Global
Double Sided Timing Belts. Construction details. Tension members: The tension members are made from low stretch glass fibre cords. Rubber cushion: The rubber cushion is made from a chloroprene compound. Tooth wrapping fabric: Polyamide industrial fabric. Features: • Moderately oil-resistant. [See More]
- Metric Pitch: T 20mm
- Belt Length: 1700 to 5000
- Belt Width: 115 to 230
- Number of Teeth: 85 to 250
from Megadyne Americas
T20 pitch, 1000 mm min. welded belt length, 30 m standard roll length [See More]
- Metric Pitch: T 20mm
- Belt Material: Urethane
- Belt Width: 25
- Reinforcement: Reinforced (optional feature); Kevlar® (optional feature)
from Habasit America
Category: Flex Belts - Aramid [See More]
- Metric Pitch: T 20mm
- Minimum Pulley Size: 120
- Belt Width: 25
- Reinforcement: A - Aramid
from US Timing & Conveyor
Metric pitch. The number following T or AT designates toothspacing in mm for example T10 and AT10 are 10 millimeters. Made according to ISO 17396. Trapezoidal shaped tooth [See More]
- Metric Pitch: T 20mm
- Number of Teeth: 15 to 25
- Belt Width: 25 to 150
- Ultimate Tensile Strength: 13280 to 115087
from Habasit America
Category: Open-end Timing Belts - Aramid [See More]
- Metric Pitch: T 20mm
- Ultimate Tensile Strength: 3200
- Belt Width: 25
- Minimum Pulley Size: 120