psi Mechanical Pressure Gauges
from EXAIR
EXAIR's Pressure Regulators permit easy selection of an operating pressure that will allow the air product to work properly without using excessive amounts of compressed air. Reducing the air pressure from 100 PSIG to 80 PSIG reduces air consumption by almost 20% and reduces required input power by... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 160
- Type: Absolute
- Connection Size: 0.2500 to 1.25
from HydraCheck Inc.
A single hydraulic system can have components and or sub-systems that operate at different pressures. For example, the pressure in the housing of a hydraulic pump or motor cannot exceed 70 PSI while the system pressure might be 6000 PSI. It is not possible to use a 6000 PSI analog gauge to read... [See More]
- Scale Units: pounds per square inch; bar
- Type: Gauge
from Petersen Products Co.
Battery 9 VDC. Connection Type 1/4" Quick Disconnect, Plug. Description Alarm, Audible, Low Pressure, 0-15 psi, 9V DC Battery. Pressure 0-15 psi (0-1.03 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg) [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 15
- Type: Gauge
from Clippard
Pressure Gauge, 0 to 100 psig Panel mount [See More]
- Scale Units: pounds per square inch; kg/cm2
- Working Pressure Range: 0.0 to 100
- Type: Sealed
- Connection Size: 0.1250
from Plast-O-Matic Valves, Inc.
Series DPI Indicator designed to show at a glance if maximum filter pressure has been exceeded. 1/8 ″ FNPT connections with 0-15 PSID or 0-30 PSID Gauge; PVC or CPVC. Series DPIS includes optional switch. [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 15
- Type: Differential
- Connection Size: 0.1250
from HydraCheck Inc.
Highest quality, liquid-filled gauges available in the market today! Features a stainless steel case for protection in harsh environments. Intended for adverse service conditions where pulsating and vibration exists. Suitable for gaseous or liquid media that will not obstruct the pressure system. [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 7500
- Type: Gauge; Vacuum; Liquid Filled
- Connection Size: 0.2500
from Petersen Products Co.
Battery 9 V DC Battery. Connection Type 1/4" Quick Disconnect Plug. Description Alarm, Audible, Low Pressure, 10-90 psig, 9V DC Battery. Pressure 10-90 PSI (0.68-6.20 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg) [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 10 to 90
- Type: Gauge
from Clippard
Pressure Gauge, 0 to 100 psig Stud Mount [See More]
- Scale Units: pounds per square inch; kg/cm2
- Working Pressure Range: 0.0 to 100
- Type: Sealed
- Connection Size: 0.1250
from HydraCheck Inc.
A single hydraulic system can have components and or sub-systems that operate at different pressures. For example, the pressure in the housing of a hydraulic pump or motor cannot exceed 70-PSI while the system pressure might be 6000-PSI. It is not possible to use a 6000-PSI analog gauge to read... [See More]
- Scale Units: pounds per square inch; bar
- Type: Gauge
from Petersen Products Co.
Battery 9 VDC. Comment 1 Alarm, Audible, Low Pressure, 10-90 psig (0.69-6.21 bar). Connection Type 1/2" Quick Disconnect, Plug. Description Alarm, Audible, Low Pressure, 10-90 psig, 9V DC Battery. Pressure 10-90 psi (0.69-6.21 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg) [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 10 to 90
- Type: Gauge
from HydraCheck Inc.
The Pressure Gauge Diagnostic Tee Kit is an excellent tool for capturing pressure measurements on all types of hydraulic and pneumatic equipment, both mobile and industrial. The kit combines accurate pressure gauges along with the most common in-line adaptors for JIC and ORFS port configurations. [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 6000
- Type: Gauge
from Petersen Products Co.
Connection Type 1/2" Quick Disconnect Plug. Description Alarm, Audible, Low Pressure, 300 psig, 1/2" Quick Disconnects. Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg) [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 300
- Type: Gauge
from HydraCheck Inc.
The glycerine-filled Quadrigage (Tetra Gauge) offers pressure readings from 0 to 6000 PSI via 3 pressure gauges. Low-pressure gauge range – 0 to 300 PSI. Medium-pressure gauge range – 0 to 1000 PSI. High-pressure gauge range – 0 to 6000 PSI. [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 6000
- Type: Gauge
- Diameter: 15.5
from Petersen Products Co.
Battery 9 VDC. Connection Type 1-1/2" (38 mm) Cam & Groove Coupling. Description Alarm, Audible, Low Pressure. Pressure 10-90 psi (0.69-6.21 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg) [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 10 to 90
- Type: Gauge
from HydraCheck Inc.
The Standard Quadrigage (Tetra Gauge) offers pressure readings from 0 to 5000 PSI via 3 pressure gauges. Low-pressure gauge range – 0 to 150 PSI. Medium-pressure gauge range – 0 to 600 PSI. High-pressure gauge range – 0 to 5000 PSI. [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 5000
- Type: Gauge
- Diameter: 15.5
from Petersen Products Co.
Battery 9 VDC. Connection Type 1/4" Quick Disconnect Plug. Description Alarm, Audible, Low Pressure, 20-300 psig, 9V DC Battery. Pressure 20-300 psi (1.37-20.68 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg) [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 20 to 300
- Type: Gauge
from HydraCheck Inc.
A single hydraulic system can have components and or sub-systems that operate at different pressures. For example, the pressure in the housing of a hydraulic pump or motor cannot exceed 70-PSI while the system pressure might be 6000-PSI. It is not possible to use a 6000-PSI analog gauge to read... [See More]
- Scale Units: pounds per square inch; bar
- Type: Gauge
from Petersen Products Co.
Battery 9 VDC. Connection Type 1/4" Quick Disconnect Plug. Description Alarm, Audible, Low Pressure, 50-500 psig, 9V DC Battery. Pressure 50-500 psi (3.45-34.47 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg) [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 50 to 500
- Type: Gauge
from HydraCheck Inc.
HydraCheck developed the Universal Pressure Gauge Diagnostic Tee Kit because we wanted to give hydraulic technicians one kit that has all the pressure gauges and gauge port adapters needed for checking a broad variety of pressures. Having the right pressure only solves half the problem though. There... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 8700
- Type: Gauge
from Petersen Products Co.
Connection Type 1/4" QC, Plug. Description Gauge, Air or Water. Dia., Face 2.5" (64mm). Pressure, PSI 0-60 psi (0-4.14 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg). Type Glycerin Filled [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 60
- Type: Gauge
- Diameter: 2.5
from Petersen Products Co.
Connection Type 1/4" QC, Plug. Description Gauge, Air or Water. Dia., Face 2.5" (64mm). Pressure, PSI 0-160 psi (0-11.04 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg). Type Glycerin Filled [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 160
- Type: Gauge
- Diameter: 2.5
from Petersen Products Co.
Connection Type 1/4" Quick Connect, Plug. Description Gauge, Air or Water. Dia., Face 2.5" (64mm). Pressure, PSI 0-600 psi (0-41.38 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg). Type Glycerin Filled [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 600
- Type: Gauge
- Diameter: 2.5
from Petersen Products Co.
Connection Type 1/4" QC, Plug. Description Gauge, Air or Water. Dia., Face 2.5" (64mm). Pressure, PSI 0-100 psi (0-6.90 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg). Type Glycerin Filled [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 100
- Type: Gauge
- Diameter: 2.5
from Petersen Products Co.
Connection Type 1/4" QC, Plug. Description Gauge, Air or Water. Dia., Face 2.5" (64mm). Pressure, PSI 0-30 psi (0-2.07 bar). Sage Subcategory Number W9360. Shipping Wt. 2 Lb (0.91 Kg). Type Glycerin Filled [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 30
- Type: Gauge
- Diameter: 2.5
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 1500
- Type: Gauge; Liquid Filled
- Connection Size: 0.1250
from Emerson Automation Solutions – TESCOM Regulators, Valves & Systems
Pressure gauges are designed for use in general, laboratory and semiconductor applications involving the measurement of compressed gases compatible with materials of construction. Suitable for gaseous media and gas filling pressure indicator on cylinder regulators. This product is also ideal for use... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 10000
- Type: Gauge
- Connection Size: 0.2500
from ASCO
The. GeoMetric ® Series conforms to the following cylinder specifications: VDMA 24562, DIN/ISO 6431, and ISO/FDIS 15552. One of the most desirable features of the cylinder line is the dual switch/sensor groove design that is a standard offering on all GeoMetric ®cylinders. The dual groove... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 60
- Type: Gauge
- Connection Size: 0.2500
from General Pump
Gauge, Glycerin Filled, Dual Scale, Panel Mount [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 3000
- Type: Gauge
- Connection Size: 0.2500
from Uehling Instrument Company
Tank liquid level (any tank shape, vented or closed to atmosphere), wells, watertowers, reservoirs, sumps, sewage/water treatment, acids, caustics, chemicals, pharmaceutical products, fuels/oils, solvents, marine, paint/varnish, polymers. Measurement of gauge, differential or absolute pressure. [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: ? to 150
- Type: Absolute; Differential; Gauge; Vacuum
- Operating Temperature: 0 to 130
from Whitman Controls, LLC
Whitman Controls specializes in the manufacture of miniature pressure, vacuum, temperature, and liquid level switches. The company prides itself on the diversity and quality of its product offering, proven by its ISO 9001 certification and the industry leadership position the firm has held for over... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 300
- Type: Absolute (optional feature)
- Type: Dual Scale
from PMC Engineering LLC
PMC Seal Gauges accurately measure pressure in industries where viscous materials are processed. The PMC design permits the diaphragm to be installed flush with the inside wall of pipes 3" or larger. This feature avoids the pocketing problems usually encountered with conventional seal gauge systems. [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 0.0 to 400
- Type: Gauge; Liquid Filled
- Diameter: 4
from Carr Lane Manufacturing Co.
Rugged, high-quality hydraulic pressure gauge. Stainless steel body with glycerin filling. Body diameter is 2-1/2 inches. Calibrated from 0 to 9000 psi. [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 7500
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from Dynisco
Features and Benefits. Direct, local readings. Mechanical design. Step-up and stem-down versions. Gauge head rotates 300 °. 0 - 5,000 or 0 -10,000 psi. Stainless steel construction. Description. Dynisco ’s family of mechanical pressure gauges are the ideal choice for applications requiring... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 1000
- Type: Absolute (optional feature); Gauge
- Diameter: 4.69
from Air Logic
The subminiature gauges are for pressure measurement between 0-160 PSI. Four pressure ranges are available: 0-30 PSI, 0-60 PSI, 0-100 PSI, and 0-160 PSI. The inside case of the gauge is polished brass; the one-piece lens cover is polycarbonate. The gauge has a brass geared movement with a "C" shape... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 30
- Type: Gauge
- Connection Size: 0.1250
from Lube USA, Inc.
Pressure gauge [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 600
- Type: Gauge
- Sensor Technology: Mechanical Deflection
from Orange Research, Inc.
Diaphragm Sensor for Liquids & Gases. These diaphragm sensor differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 1
- Type: Differential; Liquid Filled (optional feature)
- Connection Size: 0.5000
from Winters Instruments
Description & Features: • ±0.75% full scale accuracy • Food grade glycerin filling standard • Re-zero feature standard • Crack/breakage-resistant polycarbonate lens standard • Clean-In-Place design • Steam-In-Place design • Autoclavable • CRN... [See More]
- Scale Units: pounds per square inch; bar; Inches of Hg
- Working Pressure Range: -14.74 to 30
- Type: Compound; Liquid Filled
- Connection Size: 1.5
from McDaniel Controls, Inc.
2 1/2 " (63 mm) Dial Size - Fillable 1/4 " NPT [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 0.0 to 6000
- Type: Compound; Vacuum; Liquid Filled
- Connection Size: 0.2500
from Alfa Laval Inc.
The Alfa Laval electronical pressure gauge provides accurate and reliable pressure measurement with electrical output capabilities. It fulfils the demands for pressure indication in hygienic systems for the dairy, food and biopharm industries. Accurate, reliable pressure indication. The Alfa Laval... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: -14.5 to 580
- Type: Gauge
- Diameter: 3.94
from DME Company
Rugged, Low cost pressure gauges for hydraulic & pneumatic applications. Liquid fill helps dampen pulsations and acts as a natural lubricant. Northern Supply offers low prices and quick shipment. [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 10000
- Type: Gauge; Liquid Filled
- Accuracy: 0.7500
from Bijur Delimon International
Application. Pressure gauges are used as a convenient means of indicating pressure developed in the distribution system. They are supplied either with standard indicators to show the pressure during the lubrication period or with a standard indicator plus a red follower finger which is carried along... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 30 to 800
- Type: Gauge
- Connection Size: 0.1250
from NOSHOK, Inc.
Meets current standards for 3A and ASME BPE-2002. Compact size for space restricted applications. Wide variety of ranges from vacuum to 600 psi. Process temperatures up to 300 °F (150 °C). Gauge size 2 inch, Clamp size ¾ inch. Case and cover ring are electropolished Stainless steel... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 600
- Type: Gauge; Liquid Filled (optional feature)
- Connection Size: 0.7500
from Columbia Research Labs, Inc.
The Models 954M2 and 954M5 Integrated Dynamic Pressure Gages are designed for the measurement of dynamic pressure events, such as explosive blasts and high level pressure pulses in the frequency range of 1 Hz to 15KHz. The pressure sensing area will sustain continuous operating temperatures up to... [See More]
- Scale Units: pounds per square inch; mV/psi
- Working Pressure Range: 0.0 to 3500
- Type: Gauge
- Connection Size: 0.8750
from Clark Solutions
Noshok 400 (dry) and 500 (liquid filled) series all stainless steel gages are the ultimate in corrosion resistant, heavy duty, vacuum and pressure gauges. They are used in corrosive service world-wide where ruggedness and reliability are critical. Typical applications include chemical and petroleum... [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Working Pressure Range: -14.74 to 300
- Type: Compound; Vacuum
- Connection Size: 0.1250
from KOBOLD Instruments, Inc.
Product Features. 4 â € or 6 â € Combination PressureGauge & Switch. 1 or 2 SPST Switches Possible. Stainless Steel Construction. ±1.0% Accuracy. Pulsation and Vibration Damping Through Optional Paraffin Oil Filling. For those users needing a pressure gauge with... [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Working Pressure Range: 0.0 to 10000
- Type: Gauge; Vacuum; Liquid Filled
- Connection Size: 0.5000
from Watts
Series IWTG-Gas Air Test Assembly Gauges are used in commercial, residential, and institutional HVAC applications It consists of a 3/4 in. (20mm) FPT chrome-plated brass manifold, steel case, Kostil Polymer window, 3/4 in. (20mm) FPT x Schrader type air valve w/cap connection, and copper alloy... [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 100
- Type: Gauge
- Connection Size: 0.7500
from FIPA Inc.
Visual monitoring of the vacuum and/or pressure level in gripper systems. Standardized design for flexible use in vacuum and/or pressure systems. Vacuum units displayed in „mbar “: -1000 mbar = -29.5 inHg. Pressure units displayed in „bar “: 1 - 10 bar = 14.5 to 145 psi [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 14.5 to 145
- Type: Gauge
- Connection Size: 0.1250 to 0.5000
from Brooks Instrument
The Brooks Instrument 122 Series mechanical pressure gauges were designed and developed for the demanding high-purity applications of the semiconductor industry. Made of stainless steel, they feature an accuracy of 1% of full scale. These two inch gauges are durable measuring devices that come in a... [See More]
- Scale Units: pounds per square inch; bar; Inches of Hg
- Working Pressure Range: 4000
- Type: Gauge; Vacuum
- Connection Size: 0.2500
from Mid-West Instrument
1 to 2 independently adjustable switches. Clamp or Stick on Switches. Hermetically Sealed Switches. SPDT, SPST Normally Open Configurations. Most configurations CE marked to the Low Voltage Directive (EN 61010). Power Ratings ranging from 3 Watts to 60 Watts (Great for upgrades to handle cable... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 110
- Type: Differential; Liquid Filled (optional feature)
- Connection Size: 0.2500
from OMEGA Engineering, Inc.
bull; POCKET TEST GAUGES WITH 3-INCH DIAL AND STAINLESS STEEL CASE. • Accuracy 0.5% Full Scale. • Ideal "Tool Box" Test Gauge. • All Stainless Steel Construction. • LOW PRESSURE DIAPHRAGM GAUGES. • Corrosion Resistant Bronze Diaphragm. • 150% Overpressure Protection. [See More]
- Scale Units: pounds per square inch; Inches of H2O
- Working Pressure Range: 0.0 to 1000
- Type: Gauge
- Connection Size: 0.2500
from Tompkins Industries, Inc.
Description. Gauge has a 2.5 ” Dial and -04 Male Pipe Lower Mount. Case and Ring are 304 Stainless Steel and Male Pipe is Extruded Brass. [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 100
- Type: Gauge
- Diameter: 2.5
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 1500
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from ASCO
Numatics 'RB' series valve was designed and manufactured to reduce the amount of time associated with engineering layout and assembly. It's uniqueness truly revolves around it's ability to allow for multiple mounting configurations including circuit board and hardwire mounting. It has a lightweight... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 60
- Type: Gauge
- Connection Size: 0.2500
from General Pump
Gauge, Glycerin Filled, Dual Scale, Bottom Mount [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 3000
- Type: Gauge
- Connection Size: 0.2500
from Air Logic
Steel case, panel mount, U-clamp center back connection, port = 1/8" NPT [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 60
- Type: Gauge
- Diameter: 2
from Orange Research, Inc.
Piston Sensors with Explosion-Proof Enclosures. Hazardous location differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 150
- Type: Differential; Liquid Filled (optional feature)
- Connection Size: 0.2500 to 0.5000
from Winters Instruments
Description & Features: • Wide variety to measure pressure and temperature of ammonia systems • ±0.5% to ±3-2-3% accuracy available • 2.5" ( 63mm) to 10" (250mm) dial sizes • CRN registered • 5 year warranty [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: -14.74 to 150
- Type: Compound
- Connection Size: 0.2500
from McDaniel Controls, Inc.
2 1/2 "(63mm) Dial Size - Liquid Filled, Stainless Steel Case 1/4 " NPT (1/8 " NPT special order available) [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 15000
- Type: Compound; Vacuum; Liquid Filled
- Connection Size: 0.2500
from Alfa Laval Inc.
Alfa Laval pressure gauges provide accurate and reliable indication of internal pressure in vessels and systems used in the dairy, food and beverage and biopharm industries. Accurate pressure measurement. Equipped with easy-to-read, 80 or 100 mm-diameter dials, these Alfa Laval pressure gauges are... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: -14.5 to 870
- Type: Gauge
- Operating Temperature: -4 to 392
from NOSHOK, Inc.
Meets current standards for 3A and ASME BPE-2002. Ranges from 30" Hg to 0 psi through 30" Hg to 600 psi. 2-1/2 and 4 inch sizes available, with 1-1/2 or 2 inch Tri-Clamp ® process connections. Electropolished 304 Stainless steel case with welded 316LSS socket and Tri-Clamp ® process... [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Working Pressure Range: -14.74 to 400
- Type: Gauge; Liquid Filled (optional feature)
- Connection Size: 0.7500
from Columbia Research Labs, Inc.
The Models 954M2 and 954M5 Integrated Dynamic Pressure Gages are designed for the measurement of dynamic pressure events, such as explosive blasts and high level pressure pulses in the frequency range of 1 Hz to 15KHz. The pressure sensing area will sustain continuous operating temperatures up to... [See More]
- Scale Units: pounds per square inch; mV/psi
- Working Pressure Range: 0.0 to 3000
- Type: Gauge
- Connection Size: 0.8750
from Watts
Series IWTG-NYC Air Test Assembly Gauges are used in commercial, residential, and institutional HVAC applications They consist of a 3/4 in. FPT chrome-plated brass manifold with shutoff valve, steel case, Kostil Polymer window, 3/4 in. FPT x Schrader type air valve w/cap connection and copper alloy... [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 10
- Type: Gauge
- Connection Size: 0.7500
from Mid-West Instrument
Simple Rugged Designs. Glass Reinforced Thermoplastic Gauge Front Is Standard. Weather Resistant & Corrosion Resistant Gauge Front. Shatter Resistant Lens. 5 Year Warranty [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 400
- Type: Differential; Liquid Filled (optional feature)
- Connection Size: 0.2500 to 0.5000
from OMEGA Engineering, Inc.
• Economically Priced. • Long Lasting Movement. • Durable Construction. • Stocked Ranges for Fast Delivery [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Working Pressure Range: 0.0 to 600
- Type: Gauge; Compound; Vacuum
- Connection Size: 0.2500
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 3000
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from ASCO
Numatics gauges are widely used on compressors, filter/regulators ( ‘piggybacks ’), water pumps, paint sprayers, and a variety of other applications for measuring the pressure of the air passing through the component. Numatics Liquid Filled pressure gauges provide maximum service life... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 160
- Type: Gauge; Liquid Filled
- Connection Size: 0.1250
from General Pump
Gauge, Glycerin Filled, Dual Scale, Bottom Mount [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 5000
- Type: Gauge
- Connection Size: 0.2500
from Orange Research, Inc.
Miniature Differential Pressure Gauges. These miniature differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level applications,... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 30
- Type: Differential
- Connection Size: 0.1250
from Winters Instruments
Description & Features: • Economical 2" (50mm) gauge with built-in safety features • Safety blowout back steel case • Easy to read coloured pressure zones on the dial • UL Listed • 5 year warranty [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 30
- Type: Gauge
- Connection Size: 0.1250
from McDaniel Controls, Inc.
2 1/2 " (63mm) Dial Size - Stainless Steel Case 1/4 " NPT (1/8 " NPT special order available) [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 15000
- Type: Compound; Vacuum
- Connection Size: 0.2500
from Watts
Series IWTG Hose Connection Gauges are used to test water supply pressures within a distribution system. Its red indicator hand holds at the highest reading registered for detection of thermal expansion pressure surges. It features a black enamel steel case, Kostil Polymer window, 3/4 in. H.T. hose... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 200
- Type: Gauge
- Connection Size: 0.7500
from Mid-West Instrument
The Model 220 carries global certifications from CSA, UL, and ATEX. The piston style Differential Pressure Switch is CSA Certified to both the Canadian and U.S. Standards and U.L. Listed to the U.S. Standards. Certified to ATEX directive Ex d, IIB + H2 with an IP65 rating. Mid-West Instrument's new... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 100
- Type: Differential
- Connection Size: 0.2500 to 0.5000
from OMEGA Engineering, Inc.
• Durable and Accurate Design. • U-Clamp Mount. • 2 1 /2 Inch Dials. • For Use in a Wide Variety of Applications [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Working Pressure Range: 0.0 to 300
- Type: Gauge; Compound; Vacuum
- Connection Size: 0.2500
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 6000
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from General Pump
Gauge, Glycerin Filled, Dual Scale, Bottom Mount [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 20000
- Type: Gauge
- Connection Size: 0.5000
from Orange Research, Inc.
Piston Sensor Differential Pressure Gauges. These piston sensor differential pressure gauges measure the pressure difference between two points. Acting in the place of two pressure gauges, these units allow for one simple reading on an easy-to-read scale. Popular in filtration, flow and level... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 100
- Type: Differential; Liquid Filled (optional feature)
- Connection Size: 0.2500
from Winters Instruments
Description & Features: • Brass or stainless steel wetted parts • Both conventional and balanced scale available • CRN registered • 5 year warranty [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 15
- Type: Differential
- Connection Size: 0.2500
from McDaniel Controls, Inc.
2 1/2 " (63mm) Dial Size - Non-Fillable 1/4 " NPT Standard [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 15000
- Type: Compound; Vacuum
- Connection Size: 0.2500
from Watts
Series 276H300 Hose Connection Gauges are used to test water supply pressures within a distribution system. Its red indicator hand holds at the highest reading registered for detection of thermal expansion pressure surges. It features a black enamel steel case, Kostil Polymer window, 3/4 in. H.T. [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 300
- Type: Gauge
- Connection Size: 0.7500
from OMEGA Engineering, Inc.
• Heavy Duty Construction. • Double-Strength Shatter-Resistant Glass. • 2-1-2% ANSI Grade A Accuracy [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 100
- Type: Differential
- Connection Size: 0.2500
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 3000
- Type: Gauge; Liquid Filled
- Connection Size: 0.1250
from Winters Instruments
Description & Features: • Heavy duty, highly accurate, aluminum case • Brass and stainless steel wetted parts available • Two separate bourdon tubes and pointers • One red and one black pointer • CRN registered • 5 year warranty [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 15
- Type: Gauge
- Connection Size: 0.2500
from McDaniel Controls, Inc.
4 " (100mm) Dial Size - Non-Fillable 1/4 " NPT [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 0.0 to 35000
- Type: Compound; Vacuum
- Connection Size: 0.2500
from Watts
Series LFDPG-1 Bottom-Entry Pressure Gauges are used in commercial, residential, and institutional HVAC applications. It features an ABS polymer case, Kostil Polymer window, 1/4 in. NPT connection, and copper alloy Bourdon tube sensing element. Accuracy is ASME, Type B. Available in various pressure... [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 600
- Type: Gauge
- Connection Size: 0.2500
from OMEGA Engineering, Inc.
• 2 ½" and 3 ½" Dials. • Stem and Panel Mount Styles. • Weather Resistant Stainless Steel Case. • 316SS Wetted Parts. • 1% FS Accuracy [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Connection Size: 0.2500
- Type: Gauge; Vacuum; Liquid Filled (optional feature)
- Diameter: 2.5 to 3.5
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 1500
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from Winters Instruments
Description & Features: • Economical pressure gauge and valve body assembly • Bleed port and plated housing on the gas test assembly • Black steel case • ±3-2-3% accuracy • CRN registered • 5 year warranty [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 0.0 to 15
- Type: Gauge
- Connection Size: 0.7500
from McDaniel Controls, Inc.
Process Gauges 4 1/2 " Dial Size - Liquid Fillable - 1/4 " NPT [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 0.0 to 20000
- Type: Compound; Vacuum; Liquid Filled
- Connection Size: 0.2500
from Watts
Series LFDPG-3 Center Back-Entry Pressure Gauges are used in commercial, residential, and institutional HVAC applications It features an ABS polymer case, Kostil Polymer window, 1/8 or 1/4 in. NPT connection, and copper alloy Bourdon tube sensing element. Accuracy is ASME, Type B. Available in... [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 200
- Type: Gauge
- Connection Size: 0.1250 to 0.2500
from OMEGA Engineering, Inc.
• Dual Scales in PSI and BAR Standard. • 63 mm (2 ½") and 100 mm (4") Dial Sizes. • Back or Lower Mount Fittings. • All Stainless Steel Construction. • Liquid Fillable in the Field. • IP65 Protection [See More]
- Scale Units: pounds per square inch; bar
- Connection Size: 0.2500
- Type: Gauge; Vacuum; Liquid Filled
- Diameter: 2.5 to 4
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 1500
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from Winters Instruments
Description & Features: • 2.5" (63mm) to 6" (150mm) durable gauges • 2.5" (63mm) dial have a blue and red coloured case for easy identification • Dual scale (psi/ °F) • Flutterless movement on the 2.5" (63mm) • Chlorofluorocarbon (CFC) temperature scales (R-12,... [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Working Pressure Range: -14.74 to 120
- Type: Compound
- Connection Size: 0.1250
from McDaniel Controls, Inc.
4 " (100mm) Filled or Fillable [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 0.0 to 35000
- Type: Compound; Vacuum; Liquid Filled
- Connection Size: 0.2500
from Watts
Series LFDPTG-1 Combination Pressure and Temperature Gauges are used in commercial, residential, and institutional HVAC applications It is a bottom-entry type model with black enamel steel cases, Kostil Polymer windows, 1/2 in. NPT connection, copper alloy Bourdon tube pressure elements, and bimetal... [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 200
- Type: Gauge
- Connection Size: 0.5000
from OMEGA Engineering, Inc.
bull; 0.5% FS Accuracy. • PGH Gauge Ranges from 15 psi to 20,000 psi. • Double-Strength Shatter-Resistant Glass. • Heavy Duty 316 SS Wetted Parts. • Easily Adjustable, Self-Locking Micrometer Dial. • PTFE Coated SS Movement for Long Lasting Accuracy. • Solid Front with... [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Connection Size: 0.2500
- Type: Gauge; Vacuum; Liquid Filled (optional feature)
- Diameter: 4.5 to 6
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 6000
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from Winters Instruments
Description & Features: • Pulsation resistant, liquid filled stainless steel case • Glycerin filled • Brass and stainless steel internals • Restricted orifice • Crimp-On bezel • Dual scale (psi/kPa) • Optional U-Clamps and front flanges • CRN... [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 0.0 to 30
- Type: Gauge; Liquid Filled
- Connection Size: 0.1250
from McDaniel Controls, Inc.
Plant Safety Gauges 4 1/2 " Dial Size - Liquid Fillable - 1/4 " NPT [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 0.0 to 20000
- Type: Compound; Vacuum
- Connection Size: 0.2500
from Watts
Series LFDPTG-3 Combination Pressure and Temperature Gauges are used in commercial, residential, and institutional HVAC applications. It is a center, back-entry type model with a black enamel steel case, Kostil Polymer window, 1/2 in. NPT connection, copper alloy Bourdon tube pressure element, and... [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 200
- Type: Gauge
- Connection Size: 0.5000
from OMEGA Engineering, Inc.
• Dual Scales in PSI and BAR. • Economically Priced. • 3-2-3% Full Scale Accuracy*. • 1 ½", 2", 2 ½", or 3 ½" Dials (38, 50, 63, or 89 mm Dials). • Center Back or Lower Mount Fittings [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 300
- Type: Gauge
- Connection Size: 0.1250 to 0.2500
from Cat Pumps - High Pressure Pumps & Systems
A Pressure Gauge is used to monitor a pump ’s discharge or inlet pressure. They are filled with glycerine for consistent pressure readings and use 1/4 ” or 1/2 ” NPTM inlet ports. Sealed stainless steel cases eliminate corrosion risk. Product Range: Up to 20,000 PSI. Typical Usage:... [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 3000
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from Winters Instruments
Description & Features: • Rugged, 2" (50mm) forged brass case and connection • Forged brass case and socket • Glycerin filled • 3/8" Steck-O connection • 3 coloured zone dial for easier pressure reading • 0-9,000 psi/bar • 5 year warranty [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 9000
- Type: Gauge; Liquid Filled
- Connection Size: 0.3750
from McDaniel Controls, Inc.
2 " (50mm) Dial Size - Fillable 1/4 " NP and 1/8 " NPT Standard [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 0.0 to 6000
- Type: Compound; Vacuum; Liquid Filled
- Connection Size: 0.2500
from Watts
Series LFDPG-5 Top-Entry Pressure Gauges are used in commercial, residential, and institutional HVAC applications. It features an ABS polymer case, Kostil Polymer window, 1/8 or 1/4 in. NPT connection, and copper alloy Bourdon tube sensing element. Accuracy is ASME, Type B. Available in various... [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 160
- Type: Gauge
- Connection Size: 0.1250 to 0.2500
from OMEGA Engineering, Inc.
• Dual Scales in PSI and BAR Standard. • Economically Priced. • 2.5% Full Scale Accuracy. • 1 ½", 2", or 2 ½" Dial Faces. • Center Back or Lower Mount Fittings [See More]
- Scale Units: pounds per square inch; bar
- Working Pressure Range: 0.0 to 3000
- Type: Gauge; Liquid Filled
- Connection Size: 0.1250 to 0.2500
from Winters Instruments
Description & Features: • Versatile high static low differential pressure gauges • Four types of sensing elements for a large variety of ranges • Switches available for actuation • 5 year warranty [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 5 to 150
- Type: Differential
- Connection Size: 0.2500 to 0.5000
from McDaniel Controls, Inc.
21/2 " (63mm) Dial Size - Fillable 1/4 " NPT Standard (1/8 " NPT available on request) [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 0.0 to 10000
- Type: Compound; Vacuum; Liquid Filled
- Connection Size: 0.2500
from Watts
The pressure gauge is designed to read low pressure ratings with a range of 0 to 100 PSI. The gauge features a 2 1/2-inch case diameter, 1/4-inch NPT connection, bottom entry mount, ABS polymer case, 372 plastic window, brass internals and connection. [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 100
- Type: Gauge; Liquid Filled
- Connection Size: 0.2500
from OMEGA Engineering, Inc.
• 0.5% FS Accuracy. • Ideal "Tool Box" Test Gauge. • All Stainless Steel Construction [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 1000
- Type: Gauge
- Connection Size: 0.2500
from Winters Instruments
Description & Features: • High quality gauge designed to work with a pneumatic transmitter or controller • Stainless steel or brass wetted parts • 3-15 psi with a variety of receiver ranges • 316 stainless steel or brass wetted parts • CRN registered • 5 year... [See More]
- Scale Units: pounds per square inch
- Working Pressure Range: 0.0 to 15
- Type: Gauge; Liquid Filled (optional feature)
- Connection Size: 0.2500
from McDaniel Controls, Inc.
6 " (160 mm) Dial Size - Non-Fillable 1/4 " NPT [See More]
- Scale Units: pounds per square inch; Kilopascals; bar; kg/cm2
- Working Pressure Range: 0.0 to 35000
- Type: Compound; Vacuum
- Connection Size: 0.2500
from OMEGA Engineering, Inc.
• Easy To Read 2 ½ inch Dial. • Superior Performance With Vibration, Pulsation, Shock. • Leakproof O-Ring Seal. • Lower and Back Mounts [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Connection Size: 0.2500
- Type: Gauge; Vacuum; Liquid Filled
- Diameter: 2.5
from Winters Instruments
Description & Features: • Small diameter, all stainless steel gauge • 1.5" (40mm) and 2" (50mm) dials • Full view snap-in lens • Back and bottom connection • 5 year warranty [See More]
- Scale Units: pounds per square inch; Kilopascals
- Working Pressure Range: 0.0 to 30
- Type: Gauge
- Connection Size: 0.1250
from OMEGA Engineering, Inc.
• 0.25% FS Accuracy. • Monel Wetted Parts. • Stem and Panel Mount. • Mirrored Scale. • 4 ½, 6, or 8 ½" Dial Sizes [See More]
- Scale Units: pounds per square inch; Inches of Hg
- Connection Size: 0.5000
- Type: Gauge; Vacuum
- Diameter: 4.5 to 8.5