Cast Iron Diverter Valves
from FLSmidth
FLSmidth Type SK One-Way Cutoff Valves are designed to provide a positive cut-off and seal for pressure and vacuum pneumatic conveying lines. The valves can be used at inlet and outlet locations on conveying pressure tanks. The cut-off valve can also be used on branched systems to permit selection... [See More]
- Primary Material: Cast Iron
- Media Temperature: 850
- Valve Size: 3.00 to 6.00
- Actuation: Pneumatic
from Clark Solutions
Clark Globe Valves 1/2"through 2"are bronze body, NPT screw type, and are rated for ANSI Class 250 working pressure. The operating temperature range (of the controlled medium) limits are 20 ° to 250 °F. Valve stems are stainless steel and valve plugs are brass for water service and brass or... [See More]
- Primary Material: Cast Iron
- Number of Ports: 3
- Valve Type: Globe
- Valve Size: 4.00
from DMN, Incorporated
The BTD ball type diverter has been specifically designed to converge or diverge abrasive products in pneumatic conveying systems. The diverter is also suitable for systems having relatively high pressures and temperatures, e.g. thermoelectric power stations (coal and fuel oil ash), incinerators,... [See More]
- Primary Material: Cast Iron
- Maximum Pressure: -7.25 to 87.02
- Valve Size: 2.36 to 9.84
- Media Temperature: 14 to 176
from FLSmidth
The new 2-way SK Valve offers a larger hinged access port that gives full access to the internals. Replaceable hard seats are now pre-mounted in a cartridge that makes replacements very simple. Hand, Air & motor actuators are available in sizes 3" to 14". [See More]
- Primary Material: Cast Iron
- Media Temperature: 850
- Valve Size: 3.00 to 14.00
- Actuation: Manual (optional feature); Electric (optional feature); Pneumatic