Square Terminal and Junction Boxes
from Rolec Enclosures Inc.
IP 66. aluKOM is a watertight IP66 enclosure made from diecast aluminum which has gone on to become the global standard since its introduction. Originally developed as a terminal enclosure, it is ideal for mounting all types of electronic and electrical components. The large range of sizes is... [See More]
- Shape: Rectangular; Square
- Width: 1.77 to 12.2
- Length: 1.96 to 23.62
- Depth: 1.18 to 4.33
from Rolec Enclosures Inc.
IP 66, Optional: IP 67. aluNORM IP 66 diecast aluminum enclosures are designed to protect electrical and electronic components. The enclosures are available in four different versions with different lid and base combinations. This gives a huge variety of sizes and design options to choose from. [See More]
- Shape: Rectangular; Square
- Width: 2.55 to 12.59
- Length: 1.96 to 25.19
- Depth: 1.57 to 4.72
from Rolec Enclosures Inc.
IP 66, Optional: IP 67. conFORM is a highly versatile and economic range of RFI/EMI shielded aluminum enclosures with in-built shielding. The design does not require expensive and delicate conductive gaskets – continuous contact is created by means of a patented tooth system which is pre-cast... [See More]
- Shape: Rectangular; Square
- Width: 3.3 to 6.61
- Length: 3.11 to 10.55
- Depth: 1.73 to 3.93
from Rolec Enclosures Inc.
IP 65. polyKOM is a practical and economic range of standard IP 65 enclosures made from weather-resistant polyester. The enclosure are available in 15 industry standard sizes which makes them interchangeable with other standard products. All types of electronic components and electrical assemblies... [See More]
- Shape: Rectangular; Square
- Width: 2.95 to 15.94
- Length: 3.14 to 15.74
- Depth: 2.16 to 4.72
from Rolec Enclosures Inc.
IP 66 - Optional: IP 67. polyTOP is a range of IP 66 enclosures made of highly resistant glass-fibre reinforced polyester. The enclosures are ideal for industrial electronics and control equipment used in harsh indoor and outdoor applications. Special features include corrosion-resistant polyamide... [See More]
- Shape: Rectangular; Square
- Width: 3.22 to 15.9
- Length: 3.22 to 15.9
- Depth: 2.36 to 6.29
from Sitron
The CHP65 is an ideal Weatherproof Termination Box to extend the cable length of hydrostatic probes. Its characteristic is protection against voltage surges generated by lightning strike, over voltage in the supply network and also protection for the vent tube for atmospheric compensation if the... [See More]
- Shape: Square
- Ingress Protection(IP) Rating Against Foreign Objects: 6
- Material: Aluminum
- Ingress Protection(IP) Rating Against Moisture: 7
from Schneider Electric
Industrial Boxes. ABS industrial boxes. Polycarbonate industrial boxes. Spacial SBM. Steel safety boxes. Steel derivation boxes. Steel wall-mounting enclosures. Steel wall-mounting enclosures. Steel command enclosures for human-machine interface. Reinforced EMC wall-mounting enclosures. Steel... [See More]
- Shape: Rectangular; Square
- Mounting Type: Free Standing; Wall Mount
- Material: Steel; Steel - Stainless; Polycarbonate; ABS
- Features: Screw-on Cover; Insulated
from Allied Moulded Products, Inc.
Designed to insulate and protect controls, components, and combiner boxes in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil,... [See More]
- Shape: Rectangular; Square
- Width: 24
- Length: 24
- Depth: 10.13
from Stahlin Enclosures
Link lock latch for quick entry. Latch lies flat on side of enclosure. Can be lifted and turned with ease. Full 180 °+ door opening [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Saginaw Control & Engineering
Application -. Designed for indoor or outdoor use to house pushbuttons, switches, and pilot lights in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents. Provides protection from dust, dirt, oil and water. Construction -. Fiberglass reinforced... [See More]
- Shape: Rectangular; Square
- Width: 3.81 to 32.5
- Length: 6.63 to 39.31
- Depth: 3.89 to 14.05
from Phoenix Mecano Inc.
Rose+Bopla ’s Aluform enclosures are stylish, diecast aluminum. enclosures specifically designed for rugged electronic instrumentation applications. Aluform enclosures feature an attractive beveled lid and are designed with a lower profile height than Rose+Bopla ’s standard diecast... [See More]
- Shape: Rectangular; Square
- Width: 3.15
- Length: 3.15
- Depth: 3.19
from Fibox Enclosures
Featuring a hinged opaque screw cover. Including: Hinged screw cover base with 10-32 brass inserts, cover with formed in place PUR gasket, stainless hinge pin and 2 cover screws. Enclosure mounting foot kit. Accessory 10-32 screws for panel mounting. [See More]
- Shape: Square
- Width: 10
- Length: 10
- Depth: 6
from DSE HI-BOX
rarr; Combination type among DS HI boxes DS. Available to connect several boxes together. Special built-in packing inside plate makes cable gland or connector installation easy and convenient. → K-terminal box integrates various advantages of Dong Shin Hi-box to satisfy the needs of customer... [See More]
- Shape: Rectangular; Square
- Width: 7.48
- Length: 7.48
- Depth: 5.12
from Enclosure Solutions, Inc.
Poly-Guard" Polycarbonate Enclosures. UL-Listed Type 4X, 12, 6P, and 13 File No. E226322. Enclosure Solutions, Inc. re-sets the bar for functionality, aesthetics, service, design and value with the new "Poly-Guard" Series of polycarbonate enclosures. Available in six fundamental sizes ranging from... [See More]
- Shape: Square
- Width: 6
- Length: 6
- Depth: 4
from RAWELT S.A. de C.V.
FINISH: Electrostatic powder epoxy/polyester coating. Two green ground screws included. For wet location when gasketed cover are used. NPT threaded for use with RIGID and IMC conduit. APPLICATIONS: They can be installed to accommodate accessories such as switches, receptacles. Provide openings for... [See More]
- Shape: Square
- Material: Aluminum
from Ralston Metal Products Limited
Application. Ralston ’s HALP series enclosures are designed to provide protection indoors and outdoors, against dust, dirt, oil, and water for items such as: electronic and electrical controls and pneumatic components. The HALP is well suited for corrosive environments. Construction. All HALP... [See More]
- Shape: Rectangular; Square
- Width: 6.3
- Length: 6.3
- Depth: 3.5
from CANTEX, Inc.
Conforms to NEMA types 1, 3, 3S, 4, 4X, 5, 6 and 6P [See More]
- Shape: Rectangular; Square
- Width: 4
- Length: 4
- Depth: 2
from Legrand
Double Gang, Switch and Outlet box With Captive Mounting Nails on Each End, Four Auto/Clamps on each end. 100 pack. FEATURES. Durable, impact-resistant thermoplastic box. Easy installation, rectangular cutout. Innovative extras that cut installation time. [See More]
- Shape: Rectangular; Square
- Width: 3.97
- Length: 3.97
- Depth: 3.38
from Alpha Moisture Systems
GUBH Flameproof Enclosure (type “d ”) Ex II 2 G D. Designed for installation in Ex Hazardous areas. Flameproof to ATEX and IECEx certification for use in potentially explosive atmospheres. Offered with either DS4000 or DS1200 Indicators and AMT-Ex Intrinsically Safe Dewpoint Transmitter. [See More]
- Shape: Square
- Width: 5.31
- Length: 2.6
- Depth: 4.25
from Hi-Tech Controls, Inc.
Suitable for indoor installation and outdoor installation, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.86
- Length: 3.86
- Depth: 2.4
from BOXCO Inc.
1. It has excellent resistance against chemicals. 2. It can be used in wide temperature range. 3. It is proper to be used for indoor, outdoor or coastal area in harmful environment where to be contact with sea water. [See More]
- Shape: Square
- Width: 6.3
- Length: 6.3
- Depth: 3.54
from Allied Moulded Products, Inc.
Designed to insulate and protect controls, components, and combiner boxes in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil,... [See More]
- Shape: Rectangular; Square
- Width: 24
- Length: 24
- Depth: 10.13
from Stahlin Enclosures
Padlock latch for quick entry. Snap catch concept with toggle action. Integral hasp provides secure loop for padlock (padlock not included). Can be lifted and released with ease. Full 180 °+ door opening [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Saginaw Control & Engineering
Application -. Designed to house electrical and electronic controls, instrumentation and components in indoor & outdoor locations. For outdoor applications a drip shield is recommended. Construction -. 0.104 ” stainless Steel Type 304 Seams continuously welded and ground smooth. Flange... [See More]
- Shape: Rectangular; Square
- Width: 24 to 235
- Length: 60 to 90
- Depth: 12 to 36
from Phoenix Mecano Inc.
Painted Version: The Rose+Bopla watertight diecast aluminum enclosure in the powdercoated version is our basic off-the-shelf model and is stocked ready to ship. This box is powdercoat painted in silver gray and comes with a lid, base and seal. Rose+Bopla ’s diecast aluminum enclosures have... [See More]
- Shape: Rectangular; Square
- Width: 3.94
- Length: 3.94
- Depth: 3.19
from Fibox Enclosures
Featuring a hinged opaque screw cover. Including: Hinged screw cover base with 10-32 brass inserts, cover with formed in place PUR gasket, stainless hinge pin and 2 cover screws. Enclosure mounting foot kit. Accessory 10-32 screws for panel mounting. [See More]
- Shape: Square
- Width: 7.99
- Length: 7.99
- Depth: 4.02
from DSE HI-BOX
rarr; Combination type among DS HI boxes DS. Available to connect several boxes together. Special built-in packing inside plate makes cable gland or connector installation easy and convenient. → K-terminal box integrates various advantages of Dong Shin Hi-box to satisfy the needs of customer... [See More]
- Shape: Rectangular; Square
- Width: 11.02
- Length: 11.02
- Depth: 5.12
from RAWELT S.A. de C.V.
MATERIAL: Diecast aluminum. FINISH: Electrostatic powder epoxy/polyester coating. Two green ground screws included. Two mounting lugs, screws and close-up plugs included. For wet location when gasketed cover are used. NPT threaded for use with RIGID and IMC conduit. APPLICATIONS: They can be... [See More]
- Shape: Square
- Material: Aluminum
from Ralston Metal Products Limited
Application. Ralston ’s N4X-DD-SS enclosures are applied indoors and outdoors to house such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic, and machine tool controls. These enclosures are designed to provide protection against dust, dirt, oil, and... [See More]
- Shape: Rectangular; Square
- Width: 60
- Length: 60
- Depth: 12
from Legrand
Double Gang, Switch and Outlet Box with Captive Mounting Nails on Each End, Four Auto/Clamps on Each End, 3" depth for manufactured housing walls. 100 pack. FEATURES. Durable, impact-resistant thermoplastic box. Easy installation, rectangular cutout. Innovative extras that cut installation time. [See More]
- Shape: Rectangular; Square
- Width: 3.97
- Length: 3.97
- Depth: 3
from Hi-Tech Controls, Inc.
Suitable for indoor installation and outdoor installation, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.86
- Length: 3.86
- Depth: 2.4
from BOXCO Inc.
1. Our product is material of resistance to flame. 2. 20P products with A-type structure, which enables convenient wiring. 3. Easy to work because boxes are separable from terminal block. [See More]
- Shape: Square
- Width: 6.3
- Length: 6.3
- Depth: 2.76
from Allied Moulded Products, Inc.
Designed to insulate and protect controls, components, and combiner boxes in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil,... [See More]
- Shape: Rectangular; Square
- Width: 24
- Length: 24
- Depth: 10.13
from Stahlin Enclosures
Full length stainless steel hinged cover. Surface flat stainless steel screws. Full 180 °+ door opening. Crown cover available in 10 x 8 configuration only [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Saginaw Control & Engineering
Application -. Designed to house standard pushbuttons, switches and pilot lights in wet and hosed down areas and in corrosive atmospheres. Construction -. 0.063 ” stainless steel Type 304. Seams continuously welded and ground smooth. Captivated cover screws thread into sealed wells. 4-way... [See More]
- Shape: Rectangular; Square
- Width: 3.25 to 48
- Length: 3.5 to 72
- Depth: 2.75 to 24
from Phoenix Mecano Inc.
Unpainted Version: Rose+Bopla ’s watertight diecast aluminum enclosure is available in an unpainted version. For the engineers who want to do machining in-house or wish for us to do machining or other secondary service operations, the unpainted version is the best option. The features are the... [See More]
- Shape: Rectangular; Square
- Width: 3.94
- Length: 3.94
- Depth: 3.19
from Fibox Enclosures
Featuring a hinged opaque cover w/Plastic quick release latch. Including: Hinged cover base with 10-32 brass inserts, latched cover with formed in place PUR gasket, and stainless hinge pin. Quick release latches. (Latch options available.) Enclosure mounting foot kit. Accessory 10-32 screws for... [See More]
- Shape: Square
- Width: 10
- Length: 10
- Depth: 6
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carry and efficient work. No corrosion and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests (IP 66). → Convenient to use for console-alternative rail and... [See More]
- Shape: Rectangular; Square
- Width: 5.91
- Length: 5.91
- Depth: 3.54
from Ralston Metal Products Limited
Application. N12 Double Door enclosures are designed to provide protection against dust, dirt, and oil for such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic, and machine tool controls. Construction. N12 Double Door enclosures are made from 12 ga. steel. [See More]
- Shape: Rectangular; Square
- Width: 60
- Length: 60
- Depth: 10
from Legrand
Double Gang Switch and Outlet Box, Captive Mounting Nails on Each End, Four Auto Clamps on each end. 50 pack. FEATURES. Quick/Click feature secures devices quickly and easily. Does not strip when over-torqued. 4 Auto/Clamps on each end eliminate the need for separate cable clamps. Easy installation,... [See More]
- Shape: Rectangular; Square
- Width: 3.97
- Length: 3.97
- Depth: 3.38
from Hi-Tech Controls, Inc.
Suitable for indoor installation and outdoor installation, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.46
- Length: 3.46
- Depth: 2.09
from BOXCO Inc.
1. Our product is material of resistance to flame. 2. 20P products. 3. Easy to work because boxes are separable from terminal block. [See More]
- Shape: Square
- Width: 6.3
- Length: 6.3
- Depth: 2.76
from Allied Moulded Products, Inc.
Designed to insulate and protect controls, components, and combiner boxes in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil,... [See More]
- Shape: Rectangular; Square
- Width: 24
- Length: 24
- Depth: 10.13
from Stahlin Enclosures
Lift off cover design. Surface flat stainless steel screw. Integral mounting flange. Soft rounded edges. Overhang cover. Stainless steel beaded cover retention chain [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Saginaw Control & Engineering
Application -. Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt, and oil. Construction - 0.063 ” carbon steel. Continuously welded seams. Captivated cover screws thread into sealed wells. 4-way standard pushbutton holes accept all brands... [See More]
- Shape: Rectangular; Square
- Width: 3.25 to 37.38
- Length: 3.5 to 72
- Depth: 2.75 to 24
from Phoenix Mecano Inc.
The availability of 11 different sizes with lids of up to 4 different heights are the basic components of this series of enclosures. The PCI enclosure series comes with PG embossings, while the ECO enclosure series has plain sides. Optionally, the ECO enclosures are available with an opaque or... [See More]
- Shape: Rectangular; Square
- Width: 2.56
- Length: 2.56
- Depth: 2.24
from Fibox Enclosures
Features a hinged opaque cover w/S.S. Lockable latch. Including: Hinged cover base with 10-32 brass inserts, latched cover with formed in place PUR gasket, and stainless hinge pin. Quick release latches. (Latch options available.) Enclosure mounting foot kit. Accessory 10-32 screws for panel... [See More]
- Shape: Square
- Width: 10
- Length: 10
- Depth: 6
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carry and efficient work. No corrosion and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests (IP 66). → Convenient to use for console-alternative rail and... [See More]
- Shape: Rectangular; Square
- Width: 19.69
- Length: 19.69
- Depth: 9.84
from Ralston Metal Products Limited
Application. Ralston ’s N4-DD enclosures are applied indoors and outdoors to house such items as: electronic controls, instrumentation systems, pneumatic, hydraulic and machine tool controls. These enclosures are designed to provide protection against dust, dirt, oil and water. They are for... [See More]
- Shape: Rectangular; Square
- Width: 60
- Length: 60
- Depth: 12
from Legrand
Double Gang, Screw Mount Steel Stud Box with Captive Combo Head Self-Tapping Mount Screws on Each End. Four Auto/Clamps on Each End. 50 pack. FEATURES. Available in single, single deep, two, three and four gang, and 4 inch round ceiling boxes. All multi-gang and ceiling boxes include exclusive... [See More]
- Shape: Rectangular; Square
- Width: 3.97
- Length: 3.97
- Depth: 3.38
from Hi-Tech Controls, Inc.
Suitable for indoor installation and outdoor installation, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.46
- Length: 3.46
- Depth: 2.09
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Scratch and abrasion resistant UVA acrylic flush bonded window. Link lock latch for quick entry. Latch lies flat on side of enclosure. Can be lifted and turned with ease. Full 180 °+ door opening [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Features a hinged opaque cover w/S.S. lockable latch. Including: Hinged cover base with 10-32 brass inserts, latched cover with formed in place PUR gasket, and stainless hinge pin. Quick release latches. (Latch options available.) Enclosure mounting foot kit. Accessory 10-32 screws for panel... [See More]
- Shape: Square
- Width: 24.06
- Length: 24.06
- Depth: 10
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carry and efficient work. No corrosion and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests (IP 66). → Convenient to use for console-alternative rail and... [See More]
- Shape: Rectangular; Square
- Width: 11.81
- Length: 11.81
- Depth: 7.09
from Ralston Metal Products Limited
Application. Ralston ’s N12 Free Standing enclosures are designed to provide protection against dust, dirt, oil for items such as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic and machine tool controls. Construction. All N12 Free Standing Double Door... [See More]
- Shape: Rectangular; Square
- Width: 72
- Length: 72
- Depth: 24
from Legrand
Double Gang, Wood and Steel Stud Bracket Box with Quick/Click, 3/8" offset for wood and steel stud mounting. Four Auto/Clamps on each end. For use with 3/8" to 5/8" wallboard. 50 pack. FEATURES. Available in single, two, three, four gang and 4 inch square boxes. Two, three and four gang boxes and 4... [See More]
- Shape: Rectangular; Square
- Width: 3.97
- Length: 3.97
- Depth: 3.38
from Hi-Tech Controls, Inc.
Suitable for indoor installation and outdoor installation, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.46
- Length: 3.46
- Depth: 2.09
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Scratch and abrasion resistant UVA acrylic flush mounted window. Padlock latch for quick entry plus security. Snap catch concept with toggle action. Integral hasp provides secure loop for padlock (not included). Can be lifted and released with ease. Full 180 °+ door opening [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Features a hinged opaque cover w/S.S. Lockable latch. Including: Hinged cover base with 10-32 brass inserts, latched cover with formed in place PUR gasket, and stainless hinge pin. Quick release latches. (Latch options available.) Enclosure mounting foot kit. Accessory 10-32 screws for panel... [See More]
- Shape: Square
- Width: 5.98
- Length: 5.98
- Depth: 4.02
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carry and efficient work. No corrosion and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests (IP 66). → Convenient to use for console-alternative rail and... [See More]
- Shape: Rectangular; Square
- Width: 11.81
- Length: 11.81
- Depth: 5.12
from Ralston Metal Products Limited
Application. Ralston ’s N12 Free Standing enclosures are designed to provide protection against dust, dirt, and oil for such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic, and machine tool controls. Construction. All N12 Free Standing Double Door... [See More]
- Shape: Rectangular; Square
- Width: 72
- Length: 72
- Depth: 24
from Legrand
Shallow 4" Square box with Captive Mounting Nails on Each End with Threaded Mounting Holes. Two Auto/Clamps on Each End. Two #8 Mounting Screws Factory Installed. 50 pack. FEATURES. Auto/Clamps on each end eliminate the need for separate cable clamps. Easy installation, rectangular cutout. [See More]
- Shape: Rectangular; Square
- Width: 4.25
- Length: 4.25
- Depth: 1.25
from Hi-Tech Controls, Inc.
for normal environment and protected outdoor. connecting terminal made from ceramic with resistance to high temperatures. Intrinsic fire resistance in accordance with DIN 4102 part 12 in combination with function-retaining cables. 4 mounted plug cable glands, closed. mounted using exterior wall... [See More]
- Shape: Rectangular; Square
- Width: 5.91
- Length: 5.91
- Depth: 3.15
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Full length stainless steel hinged cover. Scratch and abrasion resistant UVA acrylic flush bonded window. Pan head stainless steel screws. Maintains both watertight and submersible ratings with installed window. Full 180 °+ door opening [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Features a hinged opaque cover w/S.S. lockable twist latch. Including: Hinged cover base with 10-32 brass inserts, latched cover with formed in place PUR gasket, and stainless hinge pin. Quick release latches. (Latch options available.) Enclosure mounting foot kit. Accessory 10-32 screws for panel... [See More]
- Shape: Square
- Width: 24.06
- Length: 24.06
- Depth: 10
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests(IP 66). → Convenient to use for console-alternative... [See More]
- Shape: Rectangular; Square
- Width: 3.94
- Length: 3.94
- Depth: 3.94
from Ralston Metal Products Limited
Application. Ralston ’s PB37-BC series enclosures are designed to provide protection against dust, dirt, and oil. PB37-BC are also designed to provide extra depth, which may be required in some applications. Construction. All PB37-BC enclosures are made from 14 ga. hot rolled steel and have... [See More]
- Shape: Rectangular; Square
- Width: 4
- Length: 4
- Depth: 4.75
from Legrand
4" Square Box with Threaded Mounting Holes for Wood and Steel Stud Mounting.Three Auto/Clamps each end, 2 on side opposite bracket. Two #8 mounting screws factory installed. FEATURES. Auto/Clamps on each end eliminate the need for separate cable clamps. Easy installation, rectangular cutout. [See More]
- Shape: Rectangular; Square
- Width: 4.25
- Length: 4.25
- Depth: 1.5
from Hi-Tech Controls, Inc.
for normal environment and protected outdoor. connecting terminal made from ceramic with resistance to high temperatures. Intrinsic fire resistance in accordance with DIN 4102 part 12 in combination with function-retaining cables. 4 mounted plug cable glands, closed. mounted using exterior wall... [See More]
- Shape: Rectangular; Square
- Width: 7.87
- Length: 7.87
- Depth: 3.15
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Lift off cover design. Scratch and abrasion resistant UVA acrylic flush bonded window. Pan head stainless steel screws. Integral mounting flange. Maintains both watertight and submersible ratings with installed window. Stainless steel beaded cover retention chain [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Features a hinged transparent cover w/Plastic quick release launch. Including: Hinged screw cover base with 10-32 brass inserts, cover with formed in place PUR gasket, stainless hinge pin and 2 cover screws. Enclosure mounting foot kit. Accessory 10-32 screws for panel mounting. [See More]
- Shape: Square
- Width: 5.98
- Length: 5.98
- Depth: 4.02
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests(IP 66). → Convenient to use for console-alternative... [See More]
- Shape: Rectangular; Square
- Width: 4.92
- Length: 4.92
- Depth: 3.94
from Ralston Metal Products Limited
Application. Ralston ’s IBOH Series JIC enclosures are designed to provide protection against dust, dirt, and oil for such items as: pneumatic or hydraulic instruments, transformers, and junction wiring. Construction. All IBOH enclosures are made from 14 ga. hot rolled steel. All seams are... [See More]
- Shape: Rectangular; Square
- Width: 4
- Length: 4
- Depth: 3
from Legrand
4" Square Box with Threaded Mounting Holes, Captive Mounting Nail each end. Three Auto/Clamps each end, Two on side adjacent to nails. Two #8 mounting screws factory installed. FEATURES. Auto/Clamps on each end eliminate the need for separate cable clamps. Easy installation, rectangular cutout. [See More]
- Shape: Rectangular; Square
- Width: 4.25
- Length: 4.25
- Depth: 2.38
from Hi-Tech Controls, Inc.
for normal environment and protected outdoor. terminal block made from ceramic with resistance to high temperatures. intrinsic fire resistance E 30 in accordance with DIN 4102 part 12. cable junction box with fused outgoing unit. D 01 neozed fuse base. 4 mounted plug cable glands, closed. mounted... [See More]
- Shape: Rectangular; Square
- Width: 7.87
- Length: 7.87
- Depth: 3.15
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Link lock latch for quick entry. Latch lies flat on side of enclosure. Can be lifted and turned with ease. Full 180 °+ door opening [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Featuring a hinged transparent cover w/S.S. Lockable latch. Including: Hinged cover base with 10-32 brass inserts, latched cover with formed in place PUR gasket, and stainless hinge pin. Quick release latches. (Latch options available.) Enclosure mounting foot kit. Accessory 10-32 screws for panel... [See More]
- Shape: Square
- Width: 10
- Length: 10
- Depth: 6
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests(IP 66). → Convenient to use for console-alternative... [See More]
- Shape: Rectangular; Square
- Width: 4.92
- Length: 4.92
- Depth: 2.95
from Ralston Metal Products Limited
Application. Ralston ’s IBWRH Series, JIC enclosures, are designed to provide protection, indoors and outdoors, against dust, dirt, oil, and water for items such as: pneumatic or hydraulic instruments, transformers, and junction wiring. These enclosures are for use in areas such as dairies and... [See More]
- Shape: Rectangular; Square
- Width: 4
- Length: 4
- Depth: 3
from Legrand
4" Square Box with Threaded Mounting Holes for Wood and Steel Stud Mounting. Three Auto/Clamps each end, Two on side opposite bracket. Two #8 mounting screws factory installed. FEATURES. Auto/Clamps on each end eliminate the need for separate cable clamps. Easy installation, rectangular cutout. [See More]
- Shape: Rectangular; Square
- Width: 4.25
- Length: 4.25
- Depth: 2.38
from Hi-Tech Controls, Inc.
This Enclosure box is suitable for indoor and outdoor installation and harsh environments, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.46
- Length: 3.46
- Depth: 2.09
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Padlock latch for quick entry. Snap catch concept with toggle action. Integral hasp provides secure loop for padlock (padlock not included). Can be lifted and released with ease. Full 180 °+ door opening [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Features a high base, grey cover. Including: Base with TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 5.12
- Length: 5.12
- Depth: 3.94
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests(IP 66). → Convenient to use for console-alternative... [See More]
- Shape: Rectangular; Square
- Width: 6.89
- Length: 6.89
- Depth: 2.95
from Ralston Metal Products Limited
Application. Ralston ’s IBWRH-SS series, JIC enclosures, are designed to provide protection, indoors and outdoors, against dust, dirt, oil, and water for items such as: pneumatic or hydraulic instruments, transformers, and junction wiring. These enclosures are for use in areas such as dairies... [See More]
- Shape: Rectangular; Square
- Width: 6
- Length: 6
- Depth: 4
from Hi-Tech Controls, Inc.
This Enclosure box is suitable for indoor and outdoor installation and harsh environments, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.9
- Length: 3.9
- Depth: 2.4
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Full length stainless steel hinged cover. Surface flat stainless steel screws. Full 180 °+ door opening. Extended depth cover [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Features a low base, grey cover. Including: Base with TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 5.12
- Length: 5.12
- Depth: 3.94
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests(IP 66). → Convenient to use for console-alternative... [See More]
- Shape: Rectangular; Square
- Width: 6.89
- Length: 6.89
- Depth: 3.94
from Ralston Metal Products Limited
Application. Ralston ’s IBOR series, JIC enclosures, are designed to provide protection against dust, dirt and oil for items such as: pneumatic or hydraulic instruments, transformers, and junction wiring. Construction. All IBOR enclosures are made from 14 ga. hot rolled steel. All seams are... [See More]
- Shape: Rectangular; Square
- Width: 6
- Length: 6
- Depth: 4
from Hi-Tech Controls, Inc.
This Enclosure box is suitable for indoor installation and protected outdoor installation, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.46
- Length: 3.46
- Depth: 2.09
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Lift off cover design. Surface flat stainless steel screw. Integral mounting flange. Extended depth in cover. Overhang cover. Stainless steel beaded cover retention chain [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Features a high base, grey cover. Including: Base with TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 7.09
- Length: 7.09
- Depth: 3.94
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests(IP 66). → Convenient to use for console-alternative... [See More]
- Shape: Rectangular; Square
- Width: 6.89
- Length: 6.89
- Depth: 4.92
from Ralston Metal Products Limited
Application. Ralston ’s IBWR Series, JIC enclosures, are designed to provide protection, indoors and outdoors, against dust, dirt, oil, and water for items such as: pneumatic or hydraulic instruments, transformers, and junction wiring. These enclosures are for use in areas such as dairies and... [See More]
- Shape: Rectangular; Square
- Width: 6
- Length: 6
- Depth: 4
from Hi-Tech Controls, Inc.
This Enclosure box is suitable for indoor installation and protected outdoor installation, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.9
- Length: 3.9
- Depth: 2.4
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Scratch and abrasion resistant UVA acrylic flush bonded window. Padlock latch for quick entry. Snap catch concept with toggle action. Integral hasp provides secure loop for padlock (padlock not included). Can be lifted and released with ease. Full 180 °+ door opening. Maintains both watertight... [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Featuring a high base, grey cover. Including: Base with TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 7.09
- Length: 7.09
- Depth: 3.94
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests(IP 66). → Convenient to use for console-alternative... [See More]
- Shape: Rectangular; Square
- Width: 7.87
- Length: 7.87
- Depth: 3.74
from Ralston Metal Products Limited
Application. Ralston ’s IBSC Series, JIC enclosures are designed to provide protection against dust, dirt, and oil for such items as: pneumatic or hydraulic instruments, transformers, and junction wiring. Construction. All IBSC enclosures are made from 14 ga. hot rolled steel. All seams are... [See More]
- Shape: Rectangular; Square
- Width: 4
- Length: 4
- Depth: 3
from Hi-Tech Controls, Inc.
This Enclosure box is suitable for indoor installation and protected outdoor installation, protected against weather influences according to DIN VDE 0100 Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.46
- Length: 3.46
- Depth: 2.09
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Full length stainless steel hinged cover. Scratch and abrasion resistant UVA acrylic flush bonded window. Pan head stainless steel screws. Maintains both watertight and submersible ratings with installed window. Full 180 °+ door opening. Extended depth cover [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Featuring a high base, grey cover. Including: Base with TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 7.09
- Length: 7.09
- Depth: 5.91
from DSE HI-BOX
rarr; 1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation. → Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests(IP 66). → Convenient to use for console-alternative... [See More]
- Shape: Rectangular; Square
- Width: 7.87
- Length: 7.87
- Depth: 3.74
from Ralston Metal Products Limited
Application. Ralstons EE Series is made up of modular boxes which may be coupled to each other to form groups or compact switchboards, whilst maintaining the double insulation properties and high protection level. The EE Series is suitable for all types of mountings; even under the most severe... [See More]
- Shape: Rectangular; Square
- Width: 10.6
- Length: 10.6
- Depth: 7.4
from Hi-Tech Controls, Inc.
Suitable for use in offshore areas and for indoor/outdoor installation (normal to harsh environment) in accordance with DIN VDE 0100, Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.46
- Length: 3.46
- Depth: 2.09
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Stahlin Enclosures
Lift off cover design. Scratch and abrasion resistant UVA acrylic flush bonded window. Pan head stainless steel screws. Integral mounting flange. Extended depth in cover. Maintains both watertight and submersible ratings with installed window. Stainless steel beaded cover retention chain [See More]
- Shape: Rectangular; Square
- Width: 7.5
- Length: 7.5
- Depth: 4.75
from Fibox Enclosures
Features a low base, grey cover. Including: Base with PUR gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 3.94
- Length: 3.94
- Depth: 1.38
from DSE HI-BOX
rarr; Terminal Box (draw latch type) can be customized by custom order. → The most excellent box in function and performance among the plastic boxes currently in sale. With its reasonable price comparable to metal box, it strengthens competitiveness. → Containing blocking/protection... [See More]
- Shape: Rectangular; Square
- Width: 7.48
- Length: 7.48
- Depth: 5.12
from Ralston Metal Products Limited
Application. Ralston ’s small N1 panel enclosures are general purpose enclosures designed to house electrical controls, electronic controls, and instruments indoors. These enclosures do not have the oil and dust tight characteristics of the NEMA/EEMAC Type 12 enclosures. Construction. All... [See More]
- Shape: Rectangular; Square
- Width: 5
- Length: 5
- Depth: 4
from Hi-Tech Controls, Inc.
Suitable for use in offshore areas and for indoor/outdoor installation (normal to harsh environment) in accordance with DIN VDE 0100, Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.86
- Length: 3.86
- Depth: 2.28
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Fibox Enclosures
Features a low base, grey cover. Including: Base with PUR gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 3.94
- Length: 3.94
- Depth: 1.97
from DSE HI-BOX
rarr; Terminal Box (draw latch type) can be customized by custom order. → The most excellent box in function and performance among the plastic boxes currently in sale. With its reasonable price comparable to metal box, it strengthens competitiveness. → Containing blocking/protection... [See More]
- Shape: Rectangular; Square
- Width: 11.02
- Length: 11.02
- Depth: 5.12
from Ralston Metal Products Limited
Application. Ralston ’s V-GP Vision Series single door enclosures are applied indoors and outdoors to house such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic and machine tool controls. These enclosures are designed to provide protection against... [See More]
- Shape: Rectangular; Square
- Width: 12
- Length: 12
- Depth: 6
from Hi-Tech Controls, Inc.
Suitable for use in offshore areas and for indoor/outdoor installation (normal to harsh environment) in accordance with DIN VDE 0100, Part 737. [See More]
- Shape: Rectangular; Square
- Width: 3.46
- Length: 3.46
- Depth: 2.09
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Fibox Enclosures
Features a high base, grey cover. Including: Base with PUR gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 3.94
- Length: 3.94
- Depth: 2.36
from Ralston Metal Products Limited
Application. Ralston ’s V-GP Vision Series single door enclosures are applied indoors and outdoors to house such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic and machine tool controls. These enclosures are designed to provide protection against... [See More]
- Shape: Rectangular; Square
- Width: 12
- Length: 12
- Depth: 6
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Fibox Enclosures
Features a high base, grey cover. Including: Base with PUR gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 3.94
- Length: 3.94
- Depth: 2.95
from Ralston Metal Products Limited
Application. Ralston ’s V-SS Vision Series single door enclosures are applied indoors and outdoors to house such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic and machine tool controls. These enclosures are designed to provide protection against... [See More]
- Shape: Rectangular; Square
- Width: 12
- Length: 12
- Depth: 6
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Fibox Enclosures
Features a grey cover. Including: Base with metric knock-outs and TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 5.12
- Length: 5.12
- Depth: 2.36
from Ralston Metal Products Limited
Application. Ralston ’s FM Series was especially developed for housing electrical and/or electronic apparatus in all their applications, where because of corrosion, fiberglass enclosures offer greater advantages than traditional sheet steel types. With the FM Series, it is possible to use an... [See More]
- Shape: Rectangular; Square
- Width: 30
- Length: 30
- Depth: 12
from Allied Moulded Products, Inc.
Designed to insulate and protect controls and components in both indoor and outdoor applications often found in oil refineries, waste water treatment equipment, and chemical plants. Especially well suited for high temperature or corrosive environments. Protects from dirt, dust, oil, and water. For... [See More]
- Shape: Rectangular; Square
- Width: 6.1
- Length: 6.1
- Depth: 4.18
from Fibox Enclosures
Features a grey cover. Including: Base with metric knock-outs and TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 7.09
- Length: 7.09
- Depth: 3.94
from Ralston Metal Products Limited
Application. Ralston ’s V-SW Vision Series single door enclosures are applied indoors and outdoors to house such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic and machine tool controls. These enclosures are designed to provide protection against... [See More]
- Shape: Rectangular; Square
- Width: 12
- Length: 12
- Depth: 6
from Fibox Enclosures
Featuring a grey cover. Including: Base with metric knock-outs and TPE gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 7.09
- Length: 7.09
- Depth: 3.94
from Ralston Metal Products Limited
Application. Ralston ’s V-GW Vision Series single door enclosures are applied indoors and outdoors to house such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic and machine tool controls. These enclosures are designed to provide protection against... [See More]
- Shape: Rectangular; Square
- Width: 12
- Length: 12
- Depth: 6
from Fibox Enclosures
Features a grey cover. Including: Base with metric knock-outs and PUR gasket, screws for mounting plate/DIN-rail and cover with polyamide cover screws. [See More]
- Shape: Square
- Width: 3.94
- Length: 3.94
- Depth: 2.36
from Ralston Metal Products Limited
Application. Ralston ’s V-GW Vision Series single door enclosures are applied indoors and outdoors to house such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic and machine tool controls. These enclosures are designed to provide protection against... [See More]
- Shape: Rectangular; Square
- Width: 12
- Length: 12
- Depth: 6