RJ-45 Serial Servers
from Sealevel Systems, Inc.
Easily communicate with up to 16 serial devices over an Ethernet network with the 4161 Ethernet serial server. Each RS-232 port implements all common modem control signals for maximum compatibility with a wide range of peripherals. SeaLINK ® products use industry standard RFC 2217 TCP/IP... [See More]
- Connector: RJ-45
- Number of Ports: 16
- Serial Protocol: RS232
- Data Rate: 230
from Moxa Inc.
Compared to other NPort IA device servers, the NPort IA5000A series device servers have a more rugged design with respect to housing, connectors, mounting methods, and surge protection. The NPort IA5000A series is not only hardware upgrade, but in addition, the device server's software tools are... [See More]
- Connector: RJ-45
- Number of Ports: 2
- Serial Protocol: RS232/422/485
- Data Rate: 10000 to 100000
from Patton Electronics Co.
Ethernet continues to be the most common office networking infrastructure. Now, Ethernet is making its way from the office to the shop floor. Traditional RS-232 environments require the use of multiport serial cards, expensive cables, and the personnel to manage multiple systems. Patton ’s... [See More]
- Connector: DB9; DB25; RJ-45
- Number of Ports: 1
- Serial Protocol: RS232
- Data Rate: 115
from Sena Technologies
Connects legacy serial devices to 802.11b/g Wi-Fi or Ethernet [See More]
- Connector: RJ-45; Wireless
- Number of Ports: 1
- Serial Protocol: RS232
- Data Rate: 460
from Radicom Research, Inc.
Measuring only 1 ” (W) x 1 ” (D) x 0.25 ” (H), the LSHM-200 family of Embedded Serial-to-Ethernet Modules connect serial devices to IP networks with a 10/100BaseT interface. They provide an easy solution for connecting micro controller based systems with serial port to IP networks... [See More]
- Connector: DB9; RJ-45
- Data Rate: 230
- Serial Protocol: RS232
- Network / Bus: 10/100Base-T
from OMEGA Engineering, Inc.
The OMEGA iFPX Internet Counter puts 'dumb' data on the World Wide Web. This revolutionary technology transmits virtually any conventional counting application up to 500 KHz over an Ethernet network or the Internet. The OMEGA iFPX (Internet Frequency Pulse Transmitter) can count contacts from the... [See More]
- Connector: RJ-45
- Flash: 0.5120
- RAM: 0.0160
- Network / Bus: 10Base-T
from Digi International, Inc.
The ConnectPort TS 4x4 family of device servers provides serial device network connectivity and remote Ethernet switch capability. Supporting multiple serial and Ethernet ports, this product is ideal for medical, utility, traffic, retail and POS, industrial automation, banking and many more... [See More]
- Connector: RJ-45
- Number of Ports: 8
- Serial Protocol: RS232
- Data Rate: 230 to 10000
from Sealevel Systems, Inc.
Connect with up to 16 RS-232, RS-422 and RS-485 devices over an Ethernet network with the 4163 Ethernet serial server. For quick installation, a convenient webpage is used to select RS-232, RS-422, or RS-485 mode for each serial port. Additionally, the onboard webserver provides access to common... [See More]
- Connector: RJ-45
- Number of Ports: 16
- Serial Protocol: RS232/422/485
- Data Rate: 230
from Moxa Inc.
NPort ® IA device servers provide easy and reliable serial-to-Ethernet connectivity for industrial automation applications. The device servers can connect any serial device to an Ethernet network, and to ensure compatibility with network software, they support a variety of port operation modes,... [See More]
- Connector: RJ-45
- Number of Ports: 1
- Serial Protocol: RS485; RS232/422/485
- Network / Bus: 10Base-T; 100Base-T
from Patton Electronics Co.
Ethernet has far outgrown the confines of the office network. From factories and farms to railways and retail shops, credit bureaus, banks —even medical and dental offices —anywhere serial devices are found —the EtherBITS Model 2232 offers network managers the lowest-cost solution... [See More]
- Connector: DB9; DB25; RJ-45
- Number of Ports: 1
- Serial Protocol: RS232
- Data Rate: 115
from OMEGA Engineering, Inc.
The OMEGA iBTHX transmitter lets you monitor and record barometric pressure, temperature, relative humidity, and dew point over an Ethernet network or the Internet with no special software except a Web browser. The iBTHX serves active Web pages to display real time readings; display charts of... [See More]
- Connector: RJ-45
- Flash: 0.5120
- RAM: 0.0160
- Network / Bus: 10Base-T
from Digi International, Inc.
Digi Connect WS is intended to be used with a data acquisition system to connect to RS-232 serial devices and send data from these serial devices to the data acquisition system without adjusting or manipulating the format. The extended safety terminal server complies with IEC 60601-1 3rd edition and... [See More]
- Connector: RJ-45
- Number of Ports: 2 to 9
- Serial Protocol: RS232
- Network / Bus: 10/100Base-T
from Sealevel Systems, Inc.
Connect with up to 16 RS-422 and RS-485 devices over an Ethernet network with the 4162 Ethernet serial server. For quick installation, a convenient webpage is used to select RS-422 or RS-485 mode for each serial port. Additionally, the onboard webserver provides access to common serial and network... [See More]
- Connector: RJ-45
- Number of Ports: 16
- Serial Protocol: RS232/422/485
- Data Rate: 230
from Moxa Inc.
Moxa's NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa's embedded device servers can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. The NE-4100... [See More]
- Connector: RJ-45
- Data Rate: 115
- Serial Protocol: RS422; RS485; ICMP, ARP, IP, TCP, UDP, DHCP, & More
- Operating System: Windows 95/98/ME/NT/2000/XP
from Patton Electronics Co.
Use Patton's Model 2285 universal single-port device server to control, access, inter-connect, and manage RS-485/422/232 devices from any remote location as if you were there. Patton's device servers provide a new level of efficiency and affordability to a variety of application environments... [See More]
- Connector: DB9; DB25; RJ-45
- Number of Ports: 1
- Serial Protocol: RS232/422/485
- Data Rate: 230
from OMEGA Engineering, Inc.
View Temperature + Humidity with Web Browser!!!. The OMEGA iTHX transmitter let's you monitor and record Temperature, Relative Humidity and Dew Point over an Ethernet network or the Internet with no special software except a Web browser. The OMEGA iTHX serves Active Web Pages to display real time... [See More]
- Connector: RJ-45
- Flash: 0.5120
- RAM: 0.0160
- Network / Bus: 10Base-T
from Digi International, Inc.
PortServer TS serial servers offer RS-232 serial port expansion, making it easy to connect any serial device to your network. Available in 1, 2, or 4-port models, these serial servers combine the inherent benefits of data networking with proven asynchronous connectivity. They deliver powerful, yet... [See More]
- Connector: RJ-45
- Number of Ports: 2 to 5
- Serial Protocol: RS232
- Data Rate: 10000 to 100000
from Moxa Inc.
The NPort ® DE-211 and DE-311 are 1-port serial device servers that support RS-232, RS-422, 4-wire RS-485, and 2-wire RS-485. The DE-211 supports 10 Mbps Ethernet connections and has a DB25 female connector for the serial port. The DE-311 supports 10/100 Mbps Ethernet connections and has a DB9... [See More]
- Connector: DB25; RJ-45
- Number of Ports: 1
- Serial Protocol: RS485; RS232/422/485
- Network / Bus: 10Base-T
from Digi International, Inc.
The PortServer TS M MEI serial server offers Ethernet and RS-232/422/485 serial connections, with the addition of an internal modem. The one- and three-port serial servers are ideal for applications requiring both IP networking and standard phone line dial-up connectivity for remote access to serial... [See More]
- Connector: RJ-11; RJ-45
- Number of Ports: 4
- Serial Protocol: RS232/422/485
- Data Rate: 230 to 10000
from Moxa Inc.
NPort ® 5110 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort ® 5110 device servers to give your PC... [See More]
- Connector: DB9; RJ-45
- Number of Ports: 1
- Serial Protocol: RS232
- Network / Bus: 10Base-T; 100Base-T
from Digi International, Inc.
PortServer TS MEI (Multi-Electrical Interface) serial servers offer RS-232/422/485 serial port expansion, making it easy to connect any serial device to your network. Available in one-, two-, four-, eight- or 16-port models, these serial servers combine the inherent benefits of data networking with... [See More]
- Connector: RJ-45
- Number of Ports: 2 to 5
- Serial Protocol: RS232/422/485
- Data Rate: 10000 to 100000
from Moxa Inc.
NPort ® 5130 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort ® 5130 device servers to give your PC... [See More]
- Connector: RJ-45
- Number of Ports: 1
- Serial Protocol: RS422; RS485
- Network / Bus: 10Base-T; 100Base-T
from Digi International, Inc.
The PortServer TS MEI Hardened family of serial servers is designed for serial port expansion where environmental hazards demand extended safety features and operating tolerances. Extended operating temperature (-35° C to +74° C), conformal coated circuit board, NEMA TS 2 and Class 1 Div 2... [See More]
- Connector: RJ-45
- Number of Ports: 1 to 4
- Serial Protocol: RS232/422/485
- Data Rate: 230
from Moxa Inc.
NPort ® 5150 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort ® 5150 device servers to give your PC... [See More]
- Connector: DB9; RJ-45
- Number of Ports: 1
- Serial Protocol: RS485; RS232/422/485
- Network / Bus: 10Base-T; 100Base-T
from Digi International, Inc.
PortServer TS P MEI makes it easy to connect RS-232/422/485 serial devices to an IP network. By supporting versatile powering options like powered Ethernet and powered serial, this serial server can adapt to many applications where traditional power alternatives are required. [See More]
- Connector: RJ-45
- Number of Ports: 3 to 5
- Serial Protocol: RS232/422/485
- Data Rate: 230 to 10000
from Moxa Inc.
Standard TCP/IP Protocols and Choice of Operation Modes. NPort ® 5210 device servers can operate in TCP Server, TCP Client, or UDP operation mode, ensuring compatibility with software based on a standard network API (Winsock, BSD Sockets). Real COM/TTY Drivers for Existing Software. With the... [See More]
- Connector: RJ-45
- Number of Ports: 2
- Serial Protocol: RS232; RS485
- Network / Bus: 10Base-T; 100Base-T
from Moxa Inc.
Standard TCP/IP Protocols and Choice of Operation Modes. NPort ® 5230 device servers can operate in TCP Server, TCP Client, or UDP operation mode, ensuring compatibility with software based on a standard network API (Winsock, BSD Sockets). Real COM/TTY Drivers for Existing Software. With the... [See More]
- Connector: RJ-45
- Number of Ports: 2
- Serial Protocol: RS232; RS422; RS485
- Network / Bus: 10Base-T; 100Base-T
from Moxa Inc.
Network Readiness for up to Four Serial Devices. The NPort ® 5410 device server can conveniently and transparently connect up to four serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and... [See More]
- Connector: DB9; RJ-45
- Number of Ports: 4
- Serial Protocol: RS232
- Network / Bus: 10Base-T; 100Base-T