Standard / Test Block Product and Material Test Fixtures and Accessories
from Kin-Tek Laboratories Inc.
Used for generating moderate concentrations of low vapor pressure compounds such as C2H5SH, benzene, and water, and for generating high concentration mixtues of SO2, CH,3SH and other moderate vapor pressure compounds. Typical emission rate is 1 to 10 ppm, depending on the compound and the operating... [See More]
- Test Fixture Type: Standard / Test Block
- Application: Calibration, Labatory
from Foundrax Engineering Products, Ltd.
These are for comparison purposes to determine degree of operator accuracy in manual microscope measurement. These are steel blocks containing 5 Reference Indentations made with a 10mm ball in the range 2.40-6mm and 5 Reference Indentions made with a 5mm ball in the range 1.30-3mm. These measuring... [See More]
- Test Fixture Type: Standard / Test Block
- Test Standard: ISO; Brinell
- Application: Hardness
- Operation: Manual
from Kin-Tek Laboratories Inc.
Generate moderate concentrations of low vapor pressure compounds such as acrylonitrile, benzene, styrene, etc. and high concentrations of SO2, CH3SH and other moderate vapor compounds. [See More]
- Test Fixture Type: Standard / Test Block
- Application: Calibration, Labatory
from Foundrax Engineering Products, Ltd.
Foundrax UKAS certified Brinell hardness reference blocks conform to ISO 6506 and ASTM E10 and our accredited uncertainty of measurement puts us at the top of the industry. These 173cm surface area Brinell blocks are supplied with marked grids which make them easier to use, give the correct spacing... [See More]
- Test Fixture Type: Standard / Test Block
- Test Standard: ASTM; ISO; Brinell
- Application: Hardness
from Kin-Tek Laboratories Inc.
Generate moderate concentrations of high vapor pressure compounds such as SO2, H2S, NH3, Cl2, etc. and very low concentrations of low vapor pressure compounds such as carbon disulfide, methylene chloride, nitric acid, etc. [See More]
- Test Fixture Type: Standard / Test Block
- Application: Calibration, Labatory
from Kin-Tek Laboratories Inc.
Generates high concentration mixtures of high vapor pressure gases CO, CO2, NO, N2O, CH4, etc. Typical concentrations: 10 ppm to over 1,000 ppm. Tube dimensions: 1 ¾ inches diameter by 6 inches long [See More]
- Test Fixture Type: Standard / Test Block
- Application: Calibration, Labatory
from Kin-Tek Laboratories Inc.
Generates low concentration gas standards of high vapor pressure gases such as CO, CO2, NO, CH4 etc. Typical concentrations: ppb to 10 ppm. Tube dimensions: 1 ¾ inches diameter by 6 inches long [See More]
- Test Fixture Type: Standard / Test Block
- Application: Calibration, Labatory
from Kin-Tek Laboratories Inc.
Generates extremely low concentration mixtures of Cl2, NO2, COCl2, SO2, H2S. Features long life for service in remote areas where the use of disposable permeation tubes is impractical. Tube dimensions: 1 inch diameter by 6 inches long. [See More]
- Test Fixture Type: Standard / Test Block
- Application: Calibration, Labatory