Specialty Solid and Dry Film Lubricants
from AGC Chemicals Americas, Inc.
Highly cost-effective materials, Fluon ® PTFE (Polytetrafluoroethylene) Resins are the most widely used fluoropolymers found in many areas of modern life. Resin properties keep insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other... [See More]
- Applications: Automotive or Transportation; Compressors; Process Equipment, Tanks, Reactor or Lines; Textiles
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
from Everlube Products
Lubri-Bond 320R is an air drying, PTFE based solid film lubricant with an epoxy binder system. This coating provides very good corrosion resistance and performs best in lighter load carrying applications. It is ideal for applications that do not require a thermally cured coating. Lubri-Bond 320R is... [See More]
- Applications: Compressors; Electrical / Electronic; Process Equipment, Tanks, Reactor or Lines; Surgical Devices
- Specific Gravity: 0.8987
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
- Use Temperature: -100 to 250
from AGC Chemicals Americas, Inc.
Fluon ® PTFE Micro powders are PTFE lubricants milled to a very fine powder while retaining excellent lubricity properties. These powders can be compounded in rubber and plastics or dispersed in liquids to improve friction and wear properties of the base material. Many grades are used in... [See More]
- Applications: Food Contact Approved; Grease/Oil Thickener
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
from Hubbard-Hall Inc.
DESCRIPTION. Metal Guard ® 700 is an emulsion rust preventative offering outstanding corrosion protection to blackened, phosphated, and bare metal surfaces during storage and transportation. After water evaporation, this emulsion leaves an extremely thin dry film. Metal Guard ® 700 is... [See More]
- Applications: Bearings; Metal Working; Black Oxide, Zinc or Manganese Phosphate, or Bare Steel Surfaces
- Features: Biodegradable; Corrosion Inhibiting or Rust Preventative
- Specific Gravity: 1
from Coatings For Industry, Inc.
The primary use of Alseal 310 is to provide dry film lubrication, excellent anti-stick properties and water repellence. It also has non-yellowing, non-chalking properties, excellent flexibility, abrasion resistance, hardness and good chemical resistance. Further, as a water-based material, Alseal... [See More]
- Applications: Aerospace; Gas Turbines
- Features: Aerosol, Sprayable or Misting
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
from Whitford Corporation
Wear resistant and impermeable nonstick coating with excellent release. [See More]
- Applications: Automotive or Transportation; Process Equipment, Tanks, Reactor or Lines (optional feature); Oil and Gas Industry, Reprographics, Printing, Laser Printers, Copiers
- Use Temperature: 500
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
- Features: Release Agent or Mold Release
from Edwards Vacuum
Apiezon ® sealing compound Q remains firm for temperatures up to 30 °C but is sufficiently pliable to permit easy moulding into position. It is an excellent material for shielding or blanking off sections of apparatus. The compound is easily applied and can be readily removed. It has a vapor... [See More]
- Applications: General Application in the Laboratory
from Whitford Corporation
High temperature resistant; low coefficient of friction; abrasion/wear resistant; easy clean; dry film lubricant; thermoset; wide use temperature; anti-galling. [See More]
- Applications: Automotive or Transportation; Process Equipment, Tanks, Reactor or Lines (optional feature); Oil and Gas Industry, Reprographics, Printing, Laser Printers, Copiers
- Use Temperature: -319 to 500
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
- Features: Release Agent or Mold Release