Compressors / Piston Pumps Solid and Dry Film Lubricants
from AGC Chemicals Americas, Inc.
Highly cost-effective materials, Fluon ® PTFE (Polytetrafluoroethylene) Resins are the most widely used fluoropolymers found in many areas of modern life. Resin properties keep insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other... [See More]
- Applications: Bearings; Compressors
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
from Everlube Products
Lubri-Bond 320R is an air drying, PTFE based solid film lubricant with an epoxy binder system. This coating provides very good corrosion resistance and performs best in lighter load carrying applications. It is ideal for applications that do not require a thermally cured coating. Lubri-Bond 320R is... [See More]
- Applications: Compressors; Electrical / Electronic; Process Equipment, Tanks, Reactor or Lines; Surgical Devices
- Specific Gravity: 0.8987
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
- Use Temperature: -100 to 250
from Whitford Corporation
Dry-film lubricant with a frictioncoefficient of approximately 0.06. Used by itself,Xylar 201 provides the slickest dry-lubricatingsurface available. As a topcoat with Xylar 2, itprovides both low friction and extreme wearresistance. [See More]
- Applications: Compressors; Machine, Gears, Spindles, Ways and Final Drives
from Dupont Molykote
Heat cure coating for aluminum pistons. Molykote ® PA-744 Anti-Friction Coating is a dispersion of a selected blend of solid lubricants in an organic resin-solvent system. APPLICATIONS. Excellent long-term lubricating film for pistons used in automotive air conditioner compressors; gasoline and... [See More]
- Applications: Compressors
- Use Temperature: -103 to 572
- Specific Gravity: 1.21