Electrical Utility Industry Battery Chargers
from Gentherm Global Power Technologies
Inside of a 1150 Watt Global Charge System (Arctic version) showing auxiliary heater on left, gensets along left side, battery bank at back end and electrical equipment along the right side. Key Benefits. Fuel Effi cient. One Year Maintenance Intervals. Load Following Capabilities. High Effi ciency. [See More]
- Charger Type: Electrical Utility Industry; Industrial / Plant Automation and Control; Monitoring; Telecom
- Output Voltage: 12.0 to 48.0
- Power Source: AC; DC
from Stored Energy Systems/SENS
SENS EnerGenius ® IQ is a utility-grade DC power supply/charger offering industry-first on-board battery checking and data logging systems. These unique features assess battery health, alert operators to potential battery failure and help direct preventive maintenance. By integrating monitoring... [See More]
- Charger Type: General Purpose; Electrical Utility Industry; Industrial / Plant Automation and Control
- Input Voltage: 480
- Power Source: AC; 120, 208, 240, 480, 60 Hz
- Frequency: 60
from Analytic Systems
The BCA1000R Rackmount Battery Charger (Rectifier) ’s current mode switching design offers increased power and reliability in a compact package. The low ripple charging profile and standard equalize cycle greatly increases the lifetime of expensive battery systems. Extra input and output... [See More]
- Charger Type: General Purpose; Automotive / Electrical Vehicle; Electrical Utility Industry; Emergency / Security; Gel Cell Charger; Boat/Marine; Telecom; Marine & Other Rugged Environments, Automotive / RV, Electric Utilities and Substations, Base Station Power (Radio & Telecommunications)
- Input Voltage: 110 to 220
- Power Source: AC
- Frequency: 45 to 65
from Eagle Eye Power Solutions, LLC
The Eagle Eye LB-1000 is a complete solution for daily battery maintenance. It offers three complete solutions: battery charger, battery discharger and battery activator. All of these functions in one unit make the LB-1000 an important tool for any battery maintenance program. The battery charger,... [See More]
- Charger Type: Electrical Utility Industry; Telecom; Transportation, UPS, Service Groups
- Input Voltage: 110 to 230
- Power Source: AC
- Frequency: 50 to 60
from Analytic Systems
The BCA1505 battery charger provides up to 1350 watts to charge a 12 24, 36, 48 or 72 Volt battery system (2 bank) from a 110 or 220VAC source. The batteries must share a common ground. This all-new single board design incorporates state of the art switchmode technology for unmatched efficiency and... [See More]
- Charger Type: General Purpose; Electrical Utility Industry; Emergency / Security; Boat/Marine; Commercial Marine, Military and DHS, Electric Utilities and Substations, OEM Applications, Field Work / Construction Sites
- Input Voltage: 110 to 220
- Power Source: AC
- Current: 25.0
from Eagle Eye Power Solutions, LLC
The BC-1000 is a stationary float battery charger designed for use in utility, switchgear, and other industrial environments. Nominal ratings include models at 24, 48, or 130 volts DC and 6 to 50 amps DC. Built-in alarms are included for high DC voltage, low DC voltage, positive and negative ground... [See More]
- Charger Type: Electrical Utility Industry
- Frequency: 50 to 60
- Power Source: AC
- Output Voltage: 24.0 to 130.0
from Analytic Systems
The BCA1000 battery charger provides up to 1000 watts to charge a 12, 24, 32, or 48 Volt battery system (1, 2 or Optional 3 banks) from a 110 or 220VAC source. The batteries must share a common ground. This all-new single board design incorporates state of the art switch mode technology for... [See More]
- Charger Type: General Purpose; Electrical Utility Industry; Gel Cell Charger; Boat/Marine; Telecom
- Input Voltage: 110 to 220
- Power Source: AC
- Current: 2.0 to 9.0
from Eagle Eye Power Solutions, LLC
The BC-2200 is a Float Battery Charger and Power Supply based on a modular, redundant platform design. It utilizes industrial switch mode technology. The 400W hot-swappable Intelligent Power Modules (iPMs) are available at 12Vdc, 400W, 20.0A (Max), 20.0A (Rated) and 24Vdc, 400W, 10.0A (Max), 10.0A... [See More]
- Charger Type: Electrical Utility Industry
- Input Voltage: 100 to 240
- Power Source: AC
- Frequency: 45 to 205
from Analytic Systems
The BCA610 battery charger provides up to 600 watts to charge a 12, 24, 32, or 48 Volt battery system (1, 2 or Optional 3 banks) from a 110 or 220VAC source. The batteries must share a common ground. This all-new single board design incorporates state of the art switchmode technology for unmatched... [See More]
- Charger Type: General Purpose; Electrical Utility Industry; Gel Cell Charger; Boat/Marine; Telecom
- Input Voltage: 110 to 220
- Power Source: AC
- Current: 7.0 to 40.0
from Eagle Eye Power Solutions, LLC
Product Description. The BC-2500 is a Float Battery Charger and Power Supply based on a modular, redundant platform design. It utilizes high availability with uptime architecture. Available in 480W or 400W with hot-swappable Intelligent Power Modules (iPMs) with various ratings available at 24, 48,... [See More]
- Charger Type: Electrical Utility Industry
- Input Voltage: 100 to 240
- Power Source: AC
- Frequency: 45 to 205
from Analytic Systems
The model BCD1000 Battery Charger charges either 12V, 24V or 48V batteries from a 110, 220 or 300VDC power source. Other battery voltages up to 72 volts are also available by special order. The all-new Current Mode switching design offers increased power and reliability in a compact package. Extra... [See More]
- Charger Type: General Purpose; Electrical Utility Industry; Gel Cell Charger; Industrial / Plant Automation and Control; Boat/Marine; Marine & Other Rugged Environments, Electric Utilities and Substations, Manufacturing Plants, Steel Mills, Military Applications (COTS)
- Input Voltage: 110 to 300
- Power Source: AC
- Current: 20.0 to 60.0
from Analytic Systems
The model BCD1015 DC Battery Charger charges either 12V, 24V or 48V batteries from a 24V, 48V or 72VDC power source. Other battery voltages up to 56 volts are also available by special order. The all-new Current Mode switching design offers increased power and reliability in a compact package. The... [See More]
- Charger Type: General Purpose; Electrical Utility Industry; Gel Cell Charger; Industrial / Plant Automation and Control; Marine & Other Rugged Environments, Electric Utilities and Substations, Manufacturing Plantsm, Steel Mills, Military Applications (COTS)
- Input Voltage: 24 to 72
- Power Source: DC
- Current: 20.0 to 60.0
from Analytic Systems
Analytic Systems produces two types of inverters converting DC to AC: IPS and IVS Puresine Series. Both of these Inverters are built to last using the most durable materials available, and also feature: The ability to run 120 or 220 volt AC equipment trouble-free from 12, 24, 32, 36, 48 or 72V DC... [See More]
- Charger Type: General Purpose; Electrical Utility Industry; Emergency / Security; Industrial / Plant Automation and Control; Boat/Marine; Military, Electric Utilities, OEM Applications
- Input Voltage: 85 to 265
- Power Source: AC
- Frequency: 45 to 65