Bolt Force and Load Sensors
from Transducer Techniques, LLC
TLL SERIES. CAPACITY RANGES: 5K, 10K, 20K, 30K, 50K lb. Our TLL Series load cells are offered as an economical method for accurately measuring in line tension forces. Best results are obtained when loaded through spherical rod end bearings or similar "universal" mechanical linkage. Ranges 5,000... [See More]
- Package: Bolt
- Force Measured: Tension
- Force Rating: 5000 to 50000
- Output: Analog Voltage
from Strainsert
Load Bolts [See More]
- Package: Bolt
- Output: Analog Voltage
- Force Rating: 1500
- Operating Temperature: 150
from Powell Electronics, Inc.
Load Cells: Bolt sensors LC900 series [See More]
- Package: Bolt
- Device: Sensor Element / Chip
from tecsis LP
Model XLDB is a load washer designed to fit bolts with standard ID/OD dimensions. Ranges from 500 to 300,000 lbs are available and standard output is 2-4 mV/V. [See More]
- Package: Bolt
- Output: Analog Current
- Force Rating: 500 to 300000
- Device: Sensor / Transducer
from Baumer Ltd.
Cavity pressure quartz sensors are used in direct or indirect cavity pressure measurement for the injection molding process. The characteristics of these sensors allow high-definition measurements even in the lowest pressure ranges. • Cavity pressure sensor for direct measurement. •... [See More]
- Package: Bolt
- Force Measured: Compression
- Accuracy: 1.00
- Device: Sensor / Transducer
from Sherborne Sensors
The SS2 load cell was designed for applications where precision measurement of extremely low forces is required. It is are based upon bonded semi-conductor strain gauge technology, conferring excellent sensitivity and eliminating the fragility associated with unbonded strain gauge types. The... [See More]
- Package: Bolt
- Force Measured: Tension; Compression
- Force Rating: -0.0661 to 0.0661
- Output: Analog Voltage
from NOSHOK, Inc.
Features & Benefits. Thin film sensor is laser welded to the deformation body for superior strength and performance. Extremely accurate - with the help of Finite Element Method Analysis, this sensor is able to reach accuracies from 0.2% to 1% Full Scale. Custom-designed to customer... [See More]
- Package: S-beam; Pancake; Donut / Washer; Plate / Platform; Bolt; Link; Miniature; Cantilever; Canister; Load Pin; Rod End - Male; Rod End - Female; Tank Weighing
- Accuracy: 0.20 to 1.00
- Force Rating: 1000 to 100000
- Force Measured: Tension; Compression; Shear
from Gefran
CB series load cells are designed for trouble free application in industrial environments. The cell body and the protective bellows of the strain gauge are in corrosion resistant stainless steel and the bellows are welded using microplasma torch. CB load cells are supplied in three grades of... [See More]
- Package: Bolt
- Output: Analog Voltage
- Force Rating: 44.1 to 441
- Device: Sensor / Transducer
from PMC Engineering LLC
GSS Series of miniature load cells are fitted into the gearbox control rod and designed for use in clutchless gearshift applications. During the gear change sequence the driver moves the gear lever as normal, the GSS series load cell detects the force applied to the gear shift lever, this force is... [See More]
- Package: Bolt; Miniature
- Accuracy: 1.00
- Force Rating: -450 to 450
- Force Measured: Tension; Compression
from Kistler Group
The force to be measured acts through the cover and base of the tightly welded steel housing on the quartz sensing elements. Quartz yields an electric charge proportional to the mechanical load. The sensitivity (a material constant of quartz) and therefore the threshold, too, are practically the... [See More]
- Package: Bolt
- Force Measured: Tension; Compression
- Force Rating: 44.96
- Output: Analog Voltage
from Baumer Ltd.
Cavity pressure quartz sensors are used in direct or indirect cavity pressure measurement for the injection molding process. The characteristics of these sensors allow high-definition measurements even in the lowest pressure ranges. • Cavity pressure sensor for direct measurement. •... [See More]
- Package: Bolt
- Force Measured: Compression
- Accuracy: 1.00
- Device: Sensor / Transducer
from NOSHOK, Inc.
Available in a variety of sizes and shapres to fit almost any application. Measuring ranges from 0 kN to 5 kN through 0 kN to 5,000 kN. Accuracy levels range from ±2.0% Full Scale (B.F.S.L.) to ±0.04% Full Scale, depending on the version. Several outputs are available in both amplified and... [See More]
- Package: Bolt; Rod End - Male
- Accuracy: 0.20
- Force Rating: 0.0 to 112400
- Force Measured: Tension; Compression
from Kistler Group
The force to be measured acts through the cover and base of the tightly welded steel housing on the quartz sensing elements. Quartz yields an electric charge proportional to the mechanical load. The sensitivity (a material constant of quartz) and therefore the threshold, too, are practically the... [See More]
- Package: Bolt
- Force Measured: Tension; Compression
- Force Rating: 112
- Output: Analog Voltage