Cantilever Force and Load Sensors
from Powell Electronics, Inc.
STAINLESS CANTILEVER LOAD CELL [See More]
- Package: Cantilever
from tecsis LP
Model XLBC cantilever beam load cell is available in sizes from 4.75" to 7.75" in length and covers ranges from 100 to 10,000 lbs. These highly accurate load cells are resistant to off-axis loading and fully welded to perform reliably in a variety of applications. [See More]
- Package: Cantilever
- Output: Analog Voltage
- Force Rating: 100 to 10000
- Device: Sensor / Transducer
from Minebea Intec GmbH
The MP 79/79T Bending Beam Weigh Cell is made from stainless steel and is available in a load range from 227 kg to 5099 kg. This weigh cell is specially designed for use in weighing platforms and simple hopper weighing applications. Protection class IP68, IP69K. For economic vessel weighing... [See More]
- Package: Cantilever
- Accuracy: 0.02
- Force Rating: 501 to 11241
- Shear Type: Bending Beam
from Dover Flexo Electronics, Inc.
The NW Narrow Web Tension Transducer is a specialized bearing-mounted cantilevered idler roll with integrated dual tension sensors for measuring tension in a moving narrow web of paper, film, foil or other material. Constructed of stainless steel and aluminum for excellent corrosion resistance, the... [See More]
- Package: Cantilever
- Force Measured: Tension
- Force Rating: 12 to 100
- Output: Analog Voltage
from Gefran
The principle of measurement of the SB series of load cells is the deformation caused by the shear generated by the applied load. They are compact load cells with an all stainless steel construction that are extremely rigid towards the measured load and lateral or transverse loads. The SB series... [See More]
- Package: Cantilever
- Force Measured: Shear
- Force Rating: 1102 to 11025
- Output: Analog Voltage
from FMS USA, Inc.
The force measuring rollers of the CR 208, CR 210 and CR 212 Series are ideal devises to measure tensions in wires, cables and narrow flat materials. Features. Advantages. 10 times overload protection. No recalibration required. 20:1 force measuring range. Wide measuring range at high resolution. [See More]
- Package: Cantilever
- Accuracy: 0.50
- Force Rating: 225
- Force Measured: Tension
from Interface, Inc. - AZ
Why the Interface series MBP Miniature Beam Overload Protected Load Cell is the best in class: Proprietary Interface temperature compensated strain gages. 10x overload protection. Low height - 1in max. 0.0008%/ °F temp. effect on output. More Information. Same as MB mini beam with internal... [See More]
- Package: Miniature; Cantilever
- Force Measured: Compression
- Force Rating: 2.5 to 10
- Output: Analog Voltage; 3.0 mV/V
from OMEGA Engineering, Inc.
The LC509 Series load cell is a unique combination of a high accuracy beam type load cell with an internal amplifier giving a high level dc voltage output. Applications include industrial weighing and automated batching operations where the interfacing controller requires an amplified voltage input. [See More]
- Package: Cantilever
- Accuracy: 0.25
- Force Rating: 5
- Force Measured: Compression
from Sherborne Sensors
The SS6000 series are strain gauge based shear force sensing load cells incorporating cylindrical ends to facilitate the mounting of bearings direct to the load cell [See More]
- Package: Cantilever
- Force Measured: Shear
- Force Rating: 4410 to 11025
- Output: Analog Voltage
from NOSHOK, Inc.
Features & Benefits. Thin film sensor is laser welded to the deformation body for superior strength and performance. Extremely accurate - with the help of Finite Element Method Analysis, this sensor is able to reach accuracies from 0.2% to 1% Full Scale. Custom-designed to customer... [See More]
- Package: S-beam; Pancake; Donut / Washer; Plate / Platform; Bolt; Link; Miniature; Cantilever; Canister; Load Pin; Rod End - Male; Rod End - Female; Tank Weighing
- Accuracy: 0.20 to 1.00
- Force Rating: 1000 to 100000
- Force Measured: Tension; Compression; Shear
from tecsis LP
Models XLBL and XLBH miniature cantilever beam load cells are a compact 3.5" long and provide accurate and reliable data for load ranges between 15 g and 10 lbs. These high accuracy load cells are fully welded and constructed from stainless steel, with built-in overload protection for industrial... [See More]
- Package: Cantilever
- Force Measured: Compression
- Force Rating: 0.0551 to 10
- Output: Analog Voltage
from Minebea Intec GmbH
The PR 6207 Bending Beam Weigh Cell is made from stainless steel and is available in a load range from 10 kg to 200 kg. This weigh cell is specially designed for use in simple hopper weighing applications and is suitable for integration into hybrid scales and dosing systems. Protection class: IP67. [See More]
- Package: Cantilever
- Accuracy: 0.02 to 0.05
- Force Rating: 22.05 to 441
- Shear Type: Bending Beam
from Dover Flexo Electronics, Inc.
The RFA Ribbon Filament Transducers are designed to measure tension in any moving ribbon, filament, or very narrow web. Ideal for wire, plastic, rubber, metal, glass, composite or other flexible substrate. Three standard wheels available--one for ribbon (specify width), one for filament, or the... [See More]
- Package: Cantilever
- Force Measured: Tension
- Force Rating: 10 to 150
- Output: Analog Voltage
from Gefran
The magnet-press-on strain sensors QE1008 measure the surface-strain directly at the mounting location, similar to bonded strain gages. The QE1008 is mounted in seconds and presses strain gages under the stainless protective foil that strongly onto the surface to be measured that friction replaces... [See More]
- Package: Cantilever
- Device: Sensor / Transducer
- Accuracy: 0.50
- Technology: Strain Gauge
from FMS USA, Inc.
The measuring sensors are integrated in the roller and measure the forces which are acting on the roller in an accuratly and effective manner. Features. Advantages. 10 times overload protection. Recalibration is not required. 50:1 force measuring range. Wide measuring capability. Nominal forces from... [See More]
- Package: Cantilever
- Accuracy: 0.50
- Force Rating: 337
- Force Measured: Tension
from Interface, Inc. - AZ
Why the Interface series MB Miniature Beam Load Cell is the best in class: Proprietary Interface temperature compensated strain gages. Performance to 0.03%. Low height - 1in max. 0.0008%/ °F temp. effect on output. More Information. The MB is a miniature beam load cell used in medical test... [See More]
- Package: Miniature; Cantilever
- Force Measured: Compression
- Force Rating: 5 to 250
- Output: Analog Voltage; 3.0 mV/V
from OMEGA Engineering, Inc.
The LCEA series is an economical, bending beam load cell suitable for use in a variety of industrial and OEM force measurement and weighing applications. It is made of an aluminum alloy and comes in 1, 2 and 5 kilogram ranges. [See More]
- Package: Cantilever
- Force Measured: Compression
- Force Rating: 2.2 to 11
- Shear Type: Bending Beam
from tecsis LP
The unique parallelogram design of the model XLA provides a low profile, precision load cell with a high tolerance for off-center loading. The XLA comes in one size covering ranges from 2.2 to 500 lbs. and is available in aluminum or stainless steel. This configuration is ideal for process... [See More]
- Package: Cantilever
- Output: Analog Voltage
- Force Rating: 2.2 to 500
- Device: Sensor / Transducer
from Minebea Intec GmbH
Cast stainless steel load cell for use in platform scales and for basic weighing of small to medium-sized containers. The load cell is available in threaded and T-end versions. IP67 protected. Available for use in EX-zones 1, 20, 21. For economic vessel weighing solutions. Load cell capacity range... [See More]
- Package: Cantilever
- Accuracy: 0.02
- Force Rating: 201 to 5000
- Shear Type: Shear Beam
from Dover Flexo Electronics, Inc.
The VNW (Very Narrow Web) transducer is a compact tension sensing device for measuring process tension in narrow web (up to four inches wide), ribbon or filament. The VNW transducer combines the robust and versatile design of DFE's time-proven Model C shaft-end transducers with a choice of mounting... [See More]
- Package: Cantilever
- Force Measured: Tension
- Force Rating: 10 to 400
- Output: Analog Voltage
from Gefran
Press-on strain sensors measures the surface-strain directly at the mounting location, similar to bonded strain gages. The integrated high grade digital amplifier type 268 amplifies the signal on the spot, avoiding EMC problems. The SB76 presses strain gages under the stainless protective foil that... [See More]
- Package: Cantilever
- Force Measured: Tension; Compression
- Accuracy: 0.50
- Output: Analog Voltage; RS-232 / RS-422 / RS-485; CANOpen
from FMS USA, Inc.
FMS force measuring rollers of the RMGZ100 series are used to measure the tension in ropes, cables, wires and narrow web materials. Features. Advantages. 10 times overload protection. No recalibration required. 20:1 force measuring range. Wide measuring capability. Nominal forces from 3-300 N. Size... [See More]
- Package: Cantilever
- Accuracy: 0.50
- Force Rating: 1.35
- Force Measured: Tension
from Interface, Inc. - AZ
Why the Interface series SSB Sealed Beam Load Cell is the best in class: Proprietary Interface temperature compensated strain gages. .01% nonrepeatability. Environmentally sealed. 0.0008%/ °F temp. effect on output. Compact size. More Information. Sealed version of MB mini beam. [See More]
- Package: Cantilever
- Force Measured: Compression
- Force Rating: 60 to 1000
- Output: Analog Voltage; 3.0 mV/V
from OMEGA Engineering, Inc.
When small load measurements are required, the OMEGA ® LCL Series thin beam load cells are exceptionally well suited. The LCL Series is designed to measure many different parameters found in medical instrumentation, home appliances, process control, robotics, automotive and many other high... [See More]
- Package: Cantilever
- Force Measured: Compression
- Force Rating: 0.2500 to 40
- Output: Analog Voltage
from Dover Flexo Electronics, Inc.
The model C*transducer is the industry standard in strain-gauge based web tension transducers (sometimes called 'load cells'). Available in three frame sizes and both live-shaft and dead-shaft versions. Dead-shaft Model C Transducers are sealed to protect the inside from dust and water. Recessed... [See More]
- Package: Cantilever
- Force Measured: Tension
- Force Rating: 10 to 800
- Output: Analog Voltage
from Gefran
Press-on strain sensors measures surface-strains directly at the mounting location. The SB46 presses strain gages under the stainless protective foil that strongly onto the surface to be measured that friction replaces the bonding normally used to fix strain gages. The mounting is fast, and the... [See More]
- Package: Cantilever
- Device: Sensor / Transducer
- Force Measured: Tension; Compression
- Technology: Strain Gauge
from FMS USA, Inc.
The RMGZ 300 Series force measuring roller is used to measure the tension in wires, cables and similar materials. This dedicated measuring roller family was developed to work in rotating applications with high revolutions. Features. Advantages. Engineered to work in high revolution applications. [See More]
- Package: Cantilever
- Accuracy: 0.50
- Force Rating: 11.24
- Force Measured: Tension
from OMEGA Engineering, Inc.
Model LCM602 is a heavy duty industrial load cell designed for industrial weighing and scale applications. The LCM602 offers a highly accurate, rugged design in a small, economical package. [See More]
- Package: Cantilever
- Accuracy: -0.05 to 0.05
- Force Rating: 250
- Force Measured: Tension; Compression
from Dover Flexo Electronics, Inc.
The F series transducer is a heavy-duty, flat transducer designed to accurately measure web tension in machines having live-shaft idler rolls. One F transducer mounts under the pillow block bearing at each end of the roll shaft. Designed for use in demanding tension measurement environments, the F... [See More]
- Package: Cantilever
- Force Measured: Tension
- Force Rating: 100 to 5000
- Output: Analog Voltage
from Gefran
The principle of measurement of the SH series load cells is the deformation caused by the shear generated by the applied load. The result is a transducer that is extremely rigid both for the measured load and of lateral or transverse loads which have little effect on it. The high degree of accuracy,... [See More]
- Package: Cantilever
- Force Measured: Shear
- Force Rating: 1102 to 22050
- Output: Analog Voltage
from FMS USA, Inc.
FMS force measuring rollers of the RMGZ400/600 series are used to measure the tension in ropes, cables, wires and narrow web materials. Features. Advantages. Nominal forces from 60-4000 N. Wide material processing range. 10 times overload protection. Recalibration is not required. 50:1 force... [See More]
- Package: Cantilever
- Accuracy: 0.50
- Force Rating: 13.49
- Force Measured: Tension
from OMEGA Engineering, Inc.
Model LC602 is a heavy duty industrial load cell designed for industrial weighing and scale applications. The LC602 offers a highly accurate, rugged design in a small, economical package. [See More]
- Package: Cantilever
- Accuracy: -0.05 to 0.05
- Force Rating: 50
- Force Measured: Tension; Compression
from Gefran
Strain link sensors picks up surface-strain between the 2 mounting locations. The strain occuring between the mounting areas is mechanically amplified inside of the sensor. The integrated digital amplifier processes the signal on the spot, avoiding EMC problems. Thanks to the rugged design, this... [See More]
- Package: Cantilever
- Force Measured: Tension
- Accuracy: 0.50
- Output: Analog Current; Analog Voltage
from FMS USA, Inc.
FMS force measuring rollers of the RMGZ800 series are used to measure the tension in ropes, cables, wires and narrow web materials - made for higher forces and stability. Features. Advantages. Medium to high tension force (100-8000 N). Wide material processing range. 10 times overload protection. [See More]
- Package: Cantilever
- Accuracy: 0.50
- Force Rating: 22.48
- Force Measured: Tension
from OMEGA Engineering, Inc.
•. IP67 Environmental Rating. •. Corrosion Resistant. •. Calibration Certificate Supplied. •. 0.25% Interchangeable. •. Exact Full Scale Output Stated for Easy Equipment Setup and System Calibration [See More]
- Package: Cantilever
- Accuracy: 0.04
- Force Rating: 500 to 20000
- Force Measured: Compression
from Gefran
Press-on strain sensors measures the surface-strain directly at the mounting location, similar to bonded strain. The GE1029Tie Bar Strain Sensor presses strain gages under the stainless protective foil that strongly onto the cylindrical surface to be measured that friction replaces the bonding... [See More]
- Package: Cantilever
- Force Measured: Tension; Compression
- Accuracy: 0.50
- Device: Sensor / Transducer
from FMS USA, Inc.
The RMGZ900mini series sensors are designed as self contained cantilever mount sensors that minimise machine space requirements in narrow material processing applications. Features. Advantages. 10 times overload protection. Recalibration is not required. 50:1 force measuring range. Wide measuring... [See More]
- Package: Cantilever
- Accuracy: 0.50
- Force Rating: 4.5
- Force Measured: Tension
from OMEGA Engineering, Inc.
•. FM Approved Intrinsically Safe. •. All Stainless Steel Construction for Harsh Industrial Applications. •. 0.25% Interchangeable for Multiple Cell Applications. •. 5-Point Calibration with 59 kOhm Shunt Cal Data Provided. •. Self-Adjusting Weigh Modules Available [See More]
- Package: Cantilever
- Accuracy: -0.03 to 0.03
- Force Rating: 100
- Force Measured: Tension; Compression
from FMS USA, Inc.
The RMGZ900 series force measuring rollers are designed as self contained cantilever mount sensors that minimise machine space requirements in continuous material processing applications. Features. Advantages. 10 times overload protection. Recalibration is not required. 50:1 force measuring range. [See More]
- Package: Cantilever
- Accuracy: 0.50
- Force Rating: 11.24
- Force Measured: Tension
from OMEGA Engineering, Inc.
OMEGA ’s Model LC601 is an extremely low capacity industrial load cell with built-in overload stops in all four directions for added durability . The LC601 offers high accuracy and a rugged design in a small package. It is ideal for small scales and industrial weighing applications. [See More]
- Package: Cantilever
- Accuracy: -0.03 to 0.03
- Force Rating: 1
- Force Measured: Tension; Compression
from OMEGA Engineering, Inc.
•. FM Approved Intrinsically Safe. •. All Stainless Steel Construction. •. 0.25% Interchangeable for Multiple Cell Applications. •. 5-Point Calibration Provided [See More]
- Package: Cantilever
- Force Measured: Tension; Compression
- Force Rating: 100 to 100000
- Output: Analog Voltage
from OMEGA Engineering, Inc.
Model LCEB load cells offer exceptional accuracy in compression in controlled environments (in general anywhere a digital readout is used). Their high accuracy, small size, low creep, and excellent temperature compensation make the LCEB series an excellent choice for applications such as force... [See More]
- Package: Cantilever
- Force Measured: Compression
- Force Rating: 5 to 250
- Output: Analog Voltage
from OMEGA Engineering, Inc.
Model LCEC load cells are designed to operate in all weather or wash-down environments. Their low profile and high side load capability simplify mechanical installation considerations. Their weather sealing, high precision and repeatability make them ideally suited for rugged industrial applications... [See More]
- Package: Cantilever
- Force Measured: Tension; Compression
- Force Rating: 50 to 1000
- Output: Analog Voltage
from OMEGA Engineering, Inc.
OMEGA ’s LCAE series is a low cost, highly accurate, single point load cell, ideal for OEM applications such as electronic scales and weighing machines. The single point design is highly resistant to eccentric loading, allowing direct mounting to the scale base and weighing platform. The LCAE... [See More]
- Package: Cantilever
- Force Measured: Compression
- Force Rating: 1.3 to 440
- Shear Type: Single Point Bending Beam
from OMEGA Engineering, Inc.
•. Heavy Duty Design. •. For Tank and Bin Weighing. •. Corrosion Resistant Material. •. Self-Adjusting for Accurate Measurements [See More]
- Package: Plate / Platform; Cantilever
- Force Measured: Tension; Compression
- Force Rating: 100
- Device: Sensor / Transducer