Load Pin Force and Load Sensors
from Strainsert
Bi-Axial Load Pins are designed for applications that measure a radially applied force (Pr) where the load direction is unknown and/or changing in direction. This is facilitated by the installation of 2 perpendicular strain gage bridges (Px and Py), instrumentation, and geometric calculations. One... [See More]
- Package: Load Pin
- Technology: Strain Gauge
- Force Measured: Tension
-
Application: Other; Sheave/Pulley Assemblies
Rotating Joints
Hinge Pins
Actuators
Landing Gear
from Transducer Techniques, LLC
CLP SERIES. CAPACITY RANGES: 750, 1,500, 3,000, 6,000,. 12,500, 18,000, 30,000 lb. Our CLP Series clevis load pins are used most often where pins or large bolts would normally be carrying the load. Typical applications would include replacement for shackle pins, clevis pins, and pulley shafts. These... [See More]
- Package: Load Pin
- Force Measured: Tension (optional feature); Compression
- Force Rating: 750 to 200000
- Output: Analog Voltage
from Powell Electronics, Inc.
LOAD PIN, 10000 LBS [See More]
- Package: Load Pin
- Force Rating: 10000
from Strainsert
Load Pins are typically designed to measure from 50 to well over 1 million pounds. A few typical applications include: Structural Tests. Rocket Reaction Forces. Mooring Lines. Winch/Crane/Lifting Systems. Aircraft Wing Joints. Testing Machines. Landing Gear Clevis Joints. Sheave Axles. Sprocket,... [See More]
- Package: Load Pin
from Strainsert
The Strainsert deep sea/high pressure Clevis Pin provides the ability to measure force at clevis joints under high-pressure conditions. Complete systems are available, and include the Instrumented Clevis Pin, cabling, and a digital display indicator. [See More]
- Package: Load Pin
- Operating Temperature: 15 to 150
- Output: Analog Current
from Strainsert
Load Pin Bobbin [See More]
- Package: Load Pin
- Force Rating: 2000
from Strainsert
Load Pins [See More]
- Package: Load Pin
- Output: Analog Voltage
- Force Rating: 1500
- Operating Temperature: 150
from Strainsert
RCP/SCP Series [See More]
- Package: Load Pin
- Output: Analog Voltage
- Force Rating: 2000
- Operating Temperature: 150
from Strainsert
SPA Series [See More]
- Package: Load Pin
- Output: Analog Voltage
- Force Rating: 100000
- Operating Temperature: 150
from Strainsert
SPHC Series [See More]
- Package: Load Pin
- Output: Analog Voltage
- Force Rating: 3500
- Operating Temperature: 150
from Strainsert
The Strainsert Wireless Load Pin is a high-performance wireless telemetry solution where wired installation may be difficult, cost prohibitive, or undesirable. The system provides long battery life along with high measurement accuracy, resolution, and stability. Software tools are included for quick... [See More]
- Package: Load Pin
- Operating Temperature: -4 to 131
from FUTEK Advanced Sensor Technology, Inc.
LLP400 , 5000 lb , Load Pin , Clevis Pin , Load Cell , 0-9 VDC Analog Output , Material - 17-4 PH S.S. , 3/4" Shaft Long , 28 Awg 6 Conductor Shielded Polyurethane Cable , 10 ft Long [See More]
- Package: Load Pin
- Accuracy: -0.25 to 0.25
- Force Rating: 5000
- Output: Analog Voltage
from Stellar Technology
Standard Features. • Tension/Compression. • All Welded Stainless Steel. • -65 °to 250 °F Operation. • mV/V and. Amplified Output. •Ranges to 200,000 Lbf. •Shock and Vibration. Protection [See More]
- Package: Load Pin
- Accuracy: 0.75
- Force Rating: 3000 to 200000
- Force Measured: Tension; Compression
from Interface, Inc. - AZ
Why the Interface series LP Loadpin Load Cell is the best in class: Designed to replace pins or bolts that carry a load. Stainless steel construction. Capable of 100% humidity, 30G mechanical shock and 5G vibration. Used with clevises, or pulley shafts to monitor loads. Capacity 1,740 lbf [See More]
- Package: Load Pin
- Output: Analog Voltage; 1.6 mV/V
- Force Rating: 1740
- Device: Sensor / Transducer
from tecsis LP
The tecsis model F5301 load pin utilizes thin film technology for high accuracy and proven performance. The unit is available in ranges from 1,100 to 45,000 lbs (5 to 200 kN) and is ideal for dynamic or static measurements. Amplified output of 4-20 mA (2-wire) or 0-10 VDC (3-wire) is standard. The... [See More]
- Package: Load Pin
- Output: Analog Current; Analog Voltage
- Force Rating: 1124 to 44960
- Device: Sensor / Transducer
from NOSHOK, Inc.
Features & Benefits. Thin film sensor is laser welded to the deformation body for superior strength and performance. Extremely accurate - with the help of Finite Element Method Analysis, this sensor is able to reach accuracies from 0.2% to 1% Full Scale. Custom-designed to customer... [See More]
- Package: S-beam; Pancake; Donut / Washer; Plate / Platform; Bolt; Link; Miniature; Cantilever; Canister; Load Pin; Rod End - Male; Rod End - Female; Tank Weighing
- Accuracy: 0.20 to 1.00
- Force Rating: 1000 to 100000
- Force Measured: Tension; Compression; Shear
from FUTEK Advanced Sensor Technology, Inc.
QLA110 , 1500 lb , Amplified Load Pin , Clevis Pin , Shear Pin Load Cell , 0.495" [12.57 mm] OD , 2.5 +/-2 VDC Analog Output , Material - 17-4 PH S.S. , Internal Amplifier , 6 Pin Bendix Receptacle, PT02A-10-6P [See More]
- Package: Load Pin
- Accuracy: -2.00 to 2.00
- Force Rating: 1500
- Force Measured: Shear
from tecsis LP
Load pins are designed to replace standard load and clevis pins to provide real time force measurement in pulleys, clevis hooks, axles and roller bearings. Ruggedly designed and built to perform in harsh environments with shock and vibration resistance and all welded stainless steel construction. [See More]
- Package: Load Pin
- Output: Analog Current; Analog Voltage
- Force Rating: 2000 to 2248
- Device: Sensor / Transducer
from FUTEK Advanced Sensor Technology, Inc.
QLA183 , 7500 lb , Idler Sheave Pin , Load Pin , Clevis Pin Load Cell , 1.999" [50.77 mm] OD , Material - 17-4 PH S.S. , 2" Shaft Long , 28 Awg 6 Conductor Shielded Polyurethane Cable , 5 ft Long [See More]
- Package: Load Pin
- Accuracy: -3.00 to 3.00
- Force Rating: 7500
- Output: Analog Voltage
from tecsis LP
The Models F3301 and F33C1 shear beam load cells are offered as an OEM alternative to our standard bonded-foil strain gage product line. The thin film technology featured in the F33 series provides outstanding performance, low power consumption, excellent stability and low temperature effects. [See More]
- Package: Load Pin
- Accuracy: 0.50
- Force Rating: 450 to 22480
- Shear Type: Shear Beam
from FUTEK Advanced Sensor Technology, Inc.
QMA116 , Ch Fx: 56000 lb ; Ch Fy: 56000 lb , Custom 2 Axis Shear Pin , Load Pin , Clevis Pin Load Cell , 1.972" [50.09 mm] , Material - 17-4 PH S.S. , 24 Awg 4 Conductor Braided Shielded PVC Cable , 10 ft Long - 2x [See More]
- Package: Load Pin
- Accuracy: -2.00 to 2.00
- Force Rating: 56000
- Force Measured: Shear