Isolated Analog Voltage Input I/O Modules and Instruments
from Dataforth Corporation
Each DSCA47 thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, linearized, and converted to a high-level voltage output. Signal filtering is accomplished with a five-pole filter which provides 85dB of normal-mode rejection at 60Hz and... [See More]
- Isolation: Isolated Analog Voltage Input
- Differential Channels: Yes
- Analog Channels: 1
- Accuracy: 0.0800
from Dataforth Corporation
Each SCM7B34/34N RTD input module accepts a single channel of 100 ohm Platinum (a = 0.00385) or 120 ohm Nickel (a = 0.00672) RTD input and produces an input voltage in response to a low-level current excitation. The input signal is filtered, isolated, amplified, linearized, and converted to a... [See More]
- Isolation: Isolated Analog Voltage Input
- Differential Channels: Yes
- Analog Channels: 1
- Accuracy: 0.0300
from Dataforth Corporation
The 8B isoLynx ® SLX300 - Dataforth's newly introduced data acquisition system - builds on the proven reliability and outstanding performance of the SCM5B isoLynx ® SLX200 and the miniature-sized SensorLex ® 8B isolated signal conditioning modules to provide a compact, low cost solution... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Analog Channels: 12
- Digital I/O Channels: 8
- Accuracy: 0.0700
from Apix, Inc.
DESCRIPTION. The ISODAQ SPi Series Input Modules feature 8 independent channels and an SPi interface. They are fully isolated with. 3000 Vrms between Input, Power, SPi serial link and 2000 Vrms Channel-to-Channel. These ar [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Analog Channels: 8
- Digital I/O Channels: 8
- Resolution: 16
from Gefran
The R-MA6 is a mixed module with 6 analog inputs and 6 analog outputs. It controls 6 analog inputs configurable for potentiometer, voltage, current and strain-gauge, satisfying the applicative needs of common transducers used in industrial applications. The conversion system is sequential on the 6... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Analog Voltage Output
- Resolution: 16
- Analog Channels: 6
- Form Factor: Modular Bay or Slot System
from Moxa Inc.
The ioLogik E2240 comes with a combination of analog inputs and analog outputs in one module, and supports a wide range of sensors and actuators, including pH, conductivity, pressure, flow, and valves. [See More]
- Isolation: Isolated Analog Voltage Input
- Differential Channels: Yes
- Analog Channels: 8
- Resolution: 16
from NorPix, Inc.
StreamPix is Norpix ’s flag ship software product. Resulting from more than 10 years of interaction with our vast group of customers, StreamPix has become the ultimate Digital Video Recording software. It offers a state of the art user interface, and an enormous amount of usage flexibility for... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Digital Inputs
- Analog Channels: 32
- Digital I/O Channels: 48
- Differential Channels: Yes
from Gantner Instruments, Inc.
Q.bloxx XL is a new addition to the Q.series product family - the ideal DAQ solution for widely distributed installations that require higher performance and custom sensor terminations. Q.bloxx XL products are packaged in modular, DIN Rail mountable enclosures that easily snap together for system... [See More]
- Isolation: Isolated Analog Voltage Input
- Form Factor: DIN Rail
- Analog Channels: 2
- Host Connection: RS232/422/485
from Status Instruments, Inc.
Simple configuration via USB port. Powered from 4 to 20mA loop – 5VCD max. voltage drop. Dual trip output with independent set actions. Trip rating 250VAC, 1 Amp; 30VDC, 1 Amp. Normal and inverted high/low/deviation trip actions. Relays isolated from each other, inputs & power supply. [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output
- Analog Outputs: Relay Output
- Form Factor: DIN Rail
- User Interface: Computer Programmable
from Acromag, Inc.
The AP730 mini PCIe-based interface board provides a variety of I/O functions on a single plug-in card. This new high-density module performs both high-speed and high resolution A/D and D/A conversions. It also includes digital I/O and counter/timer functions. Now you can conserve your precious... [See More]
- Isolation: Isolated Analog Voltage Input
- Resolution: 16
- Analog Channels: 8
- Form Factor: PC Board
from MonoDAQ
Isolated digital outputs with high current capability can drive motors, pumps or valves as well as trigger pure digital signals. Three power supply voltages (5V, 12V and device voltage supply level) available on the front connector. EtherCAT interface, signal and power over the same cable. Digital... [See More]
- Isolation: Isolated Analog Voltage Input
- Form Factor: Panel / Chassis Mount; DIN Rail (optional feature)
- Analog Channels: 4
- Analog Outputs: Analog Voltage Output
from OMEGA Engineering, Inc.
The DMD-470 Series bridge amplifiers are ac powered signal conditioning modules with triple isolated voltage or current outputs for load cells, bridge type sensors and strain gages. Both models have dual zero/tare functions. Zero is used for normal bridge balance and the tare feature allows up to... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Analog Voltage Output
- Analog Outputs: Analog Voltage Output
- Form Factor: Stand-alone
- User Interface: None
from Measurement Computing
Simultaneous USB DAQ Module; 16-bit, 225kHz, 12 AI, 2 AO, 32 DIO, 2 C/T, 3 Q/D, BNC Connectors. KEY HIGHLIGHTS. The DT9836 Series of isolated, multifunction USB data acquisition (DAQ) devices provide simultaneous analog input along with synchronous analog, digital, and counter functions, allowing... [See More]
- Isolation: Isolated Analog Voltage Input
- Analog Channels: 12
- Digital I/O Channels: 32
- Resolution: 16
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. They are fully isolated with 3000 Vrms between Input, Power,. RS-485 ser [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Analog Channels: 8
- Digital I/O Channels: 8
- Resolution: 16
from Gefran
The R-MIX module is equipped with a microprocessor with digital inputs/outputs and analog inputs/outputs, useful for configuring a system with a single board and/or when you want to save space on the back-plane. It has optically-isolated 24 VDC PNP digital inputs and outputs. Each input is protected... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Digital Inputs; Isolated Digital Outputs
- Analog Channels: 4
- Digital I/O Channels: 16
- Resolution: 16
from Moxa Inc.
The ioLogik R2000/4000 series was designed for system integrators to acquire and control remote digital and analog devices over both RS-232 and RS-485 connections. Different types of digital on/off devices can be controlled, including proximity switches, mechanical switches, push buttons, optical... [See More]
- Isolation: Isolated Analog Voltage Input
- Resolution: 16
- Analog Channels: 8
- Analog Outputs: Analog Voltage Output; Analog Current Output
from Gantner Instruments, Inc.
Q.brixx XL is a new addition to the Q.series product family - the ideal DAQ solution for on-the-go applications requiring higher performance in potentially harsh environments. Q.brixx XL DAQ systems consist of up to 16 measurement modules and an integrated, high-performance controller for... [See More]
- Isolation: Isolated Analog Voltage Input
- Form Factor: DIN Rail
- Analog Channels: 2
- Transmission Rate: 256000
from Status Instruments, Inc.
Simple configuration via USBport. Universal PT100, thermocouple, mV, mA input. Input/output isolation. Dual relay outputs 250VAC, 1 Amp. Relays isolated from each other. 10 year warranty. The SEM1630 is a new generation DIN rail mounted trip amplifier from Status Instruments. It has been designed to... [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output
- Analog Outputs: Relay Output
- Form Factor: DIN Rail
- User Interface: Computer Programmable
from OMEGA Engineering, Inc.
The D1000 and D2000 Series digital transmitters are a complete family of easy to use interface modules for personal computers and other processor based equipment with standard serial I/O ports. The modules convert analog input signals to engineering units and transmit, in ASCII format, to any host... [See More]
- Isolation: Isolated Analog Voltage Input
- Analog Channels: 1
- Digital I/O Channels: 3
- Resolution: 15
from Measurement Computing
Simultaneous USB DAQ Module; 16-bit, 2.0MHz per channel, 2 AI, 32 DIO, 2 C/T, 3 Q/D, No Enclosure. KEY HIGHLIGHTS. The DT9832 Series of isolated, multifunction USB data acquisition (DAQ) devices provide simultaneous analog input along with synchronous analog, digital, and counter functions, allowing... [See More]
- Isolation: Isolated Analog Voltage Input
- Analog Channels: 2
- Digital I/O Channels: 32
- Resolution: 16
from Apix, Inc.
DESCRIPTION. The ISODIN Series DIN Modules feature 8 independent Analog channels and conform to the Industry Standard Modbus RTU Communications Protocol. Based on their high channel density, a single 32 module segment includes 256 c [See More]
- Isolation: Channel-to-Channel Isolation; Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Analog Channels: 8
- Digital I/O Channels: 32
- Resolution: 16
from Gefran
The R-MIXR module is equipped with a microprocessor with digital inputs/outputs and analog inputs/outputs, useful for configuring a system with a single board and/or when you want to save space on the back-plane. It has optically-isolated 24 VDC PNP digital inputs and outputs. Each input is... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Analog Voltage Output; Isolated Digital Inputs; Isolated Digital Outputs
- Analog Channels: 4
- Digital I/O Channels: 16
- Resolution: 16
from Moxa Inc.
Input Impedence. 500K ohms. Data Format. 16-bit integer (2 ’s complement). Accuracy. • ±0.1%, FSR @ 25 °C. • ±0.3%, FSR @ 0 °C, 60 °C. Conversion Time. 200 ms for all channels. Resolution. 0.1 °C/10 milli-ohms. Sensor Type. • PT50, PT100, PT200,... [See More]
- Isolation: Isolated Analog Voltage Input
- Form Factor: Modular Bay or Slot System
- Analog Channels: 2
- User Interface: Computer Programmable
from Gantner Instruments, Inc.
Q.raxx XL is a new addition to the Q.series product family - the ideal 19" rackmount DAQ solution for applications that require high channel density and custom sensor terminations. Q.raxx XL DAQ systems can utilize an integrated, high-performance controller for communication, control, and data... [See More]
- Isolation: Isolated Analog Voltage Input
- Form Factor: DIN Rail
- Analog Channels: 2
- Transmission Rate: 256000
from OMEGA Engineering, Inc.
The DR910 passive isolator is used for the electrical isolation and processing of analog 0 to 20 mA or 4 to 20 mA standard current signals. The DR910 provides electrical isolation between the control electronics and process I/O. In addition, interference signals above 75 Hz are effectively... [See More]
- Isolation: Isolated Analog Voltage Input; Isolated Analog Voltage Output
- Accuracy: 0.1000
- Analog Channels: 1
- Form Factor: DIN Rail