Hand Held Calibration Instruments
from PCE Instruments / PCE Americas Inc.
PCE-LOC 20 Calibrator. For Simulation and Measurement of Current and Voltage / Li-Ion battery / Continuity tester / Ramp function / Data logger. The calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the calibrator to be used to set... [See More]
- Calibrator Style: Handheld
- DC Voltage Range: 0.0 to 30
- Calibration Signal: DC Voltage; DC Current
- DC Current Range: 0.0 to 0.0240
from MSA Safety
The TL105 is a battery operated test lamp designed specifically to test General Monitors Flame Detectors. The TL105 is an explosion-proof test lamp that can be used with the FL4000H MSIR flame detector as well as any of the FL3100 Series Flame Detectors. The TL105 operates up to 35 feet from the... [See More]
- Calibrator Style: Handheld; Portable
- Operating Temp: 5 to 122
from PCE Instruments / PCE Americas Inc.
Process calibrator indicates the nominal value for simulations and measurement of input. electrical signals such as frequency and temperature The PCE-123 Process calibrator / nominal value indicator is a device that does need a mains connector and that is used to simulate regulation signals or units... [See More]
- Calibrator Style: Handheld
- DC Voltage Range: 0.0 to 1
- Calibration Signal: DC Voltage; DC Current; Signal / Waveform Generator Output
- DC Current Range: 0.0040 to 0.0200
from PCE Instruments / PCE Americas Inc.
Multifunction Calibrator PCE-789. Multifunction Calibrator that measures and simulates current and voltage signals and. thermocouples / integrates a function generator for specific waveforms /. large graphical display with backlight /. data logger function The PCE-789 Multifunction Calibrator is a... [See More]
- Calibrator Style: Handheld
- DC Voltage Range: -0.0100 to 15
- Calibration Signal: DC Voltage; DC Current
- DC Current Range: 0.0040 to 0.0240
from Time Mark Corporation
The Model 680 is a user selectable voltage or current simulator. It is useful for the setup and testing of process controllers and indicators with either a current loop or control voltage input, such as liquid level controllers and other devices. The mode of operation is displayed on the top line of... [See More]
- Calibrator Style: Handheld; Portable
- DC Current Range: 1.00E-3
- Calibration Signal: DC Current
- Description (Current): 4-20mA
from Isotech North America
The Practical Instrument Electronics (PIE) Model 525 Dual T/C & RTD calibrator is the best on the market. It provides direct temperature calibration to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. Also, the Model 525 reads... [See More]
- Calibrator Style: Handheld; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: RTD, Thermistor; Thermocouple; Temperature
- Display: Digital Readouts
from Badger Meter
Designed for use with the ModMAG ® M2000 and M5000 meters, this handheld device allows you to perform a series of field verification and analytical performance tests on site, in less than 20 minutes. Features. Our handheld field verification device: Determines if the meter amplifier is within... [See More]
- Calibrator Style: Handheld; Portable
from Transcat, Inc.
Product Highlights. Integrated pneumatic pump generates pressure up to 300 psi for calibrating pressure gauges, transmitters, and switches. Accurate to + or - 0.025 percent for precise calibration. Digital display shows up to 3 calibration values at one time. Measures 9" x 4" x 2.8" (H x W x D) for... [See More]
- Calibrator Style: Handheld
- Environmental Properties: Pressure / Vacuum
from OTEK Corporation
OTEK's New Model 420 wasdeveloped by popular demand fora LOW COST, no frills field calibratorfor any device requiring thepopular 4-20mA current loop signal.The 420 comes in a compact4 1/2 X 2 1/2 X 3/4" housing withbelt clip for servicemen. "NOHANDS" are required to operatethe 420 once you press the... [See More]
- Calibrator Style: Handheld
- DC Current Range: 1.00E-3
- Calibration Signal: DC Current
- Description (Current): 4-20mA
from KANOMAX USA, INC.
Conforms to ANSI S1.40 and IEC942 Class C [See More]
- Calibrator Style: Handheld
- Frequency Range: 1000
- Calibration Signal: Signal / Waveform Generator Output
- Other Properties: Sound Meter Calibrator
from HORIBA Instruments, Inc.
The MFT-20 offers a way of checking whether the mass flow controller (MFC) is operating normally by driving and controlling the MFC while monitoring the input and output voltages. In this manner, any abnormalities in the MFC or power supply can be quickly examined before being removed from the... [See More]
- Calibrator Style: Handheld
- DC Voltage Range: 7 to 30
- Calibration Signal: DC Voltage
- Environmental Properties: Flow
from Cole-Parmer
bull; Electric Pump Generates Pressure to 150 psi. • The 330 comes in 3 ranges of 30 PSI, 150 PSI and 300 PSI. The 300 PSI version uses a manually operated handpump. • The compact, rugged design operates on eight (8) standard AA Alkaline batteries. • Performs approximately 300... [See More]
- Calibrator Style: Handheld; Battery Powered
- Operating Temp: -50 to 122
- Environmental Properties: Pressure / Vacuum
from Beamex Oy Ab
Beamex ® MC4 Documenting Process Calibrator. Document As You Go. Communication with Calibration Software: Using the MC4 together with calibration software provides you with a complete documenting calibration system that produces calibration certificates automatically. All-in-One Functionality:... [See More]
- Calibrator Style: Handheld; Portable; Modular; Battery Powered
- Electrical Properties: Resistance/ Impedance
- Environmental Properties: Pressure / Vacuum; RTD, Thermistor; Thermocouple; Temperature
- User Interface: Digital Front Panel
from Dynalco
INSTRUMENTATION: Signal Generator/Counter/Calibrator. Used to calibrate tachometers, digital speed indicators, governors, counters, frequency meters. Measures signal frequency from magnetic pickups, pulsers, ac generators, shaft encoders. Eliminates the need for a frequency counter or an audio... [See More]
- Calibrator Style: Handheld
- Frequency Range: 10 to 20000
- Calibration Signal: Signal / Waveform Generator Output
- Waveform: Other Predefined
from AMETEK Sensors, Test & Calibration
The ETM-2000 series consists of 5 different systems and covers a broad variety of temperature applications. The series has 3 systems for thermocouples and 2 for Pt100 sensors. Both Pt100 models have IP67 (water proof) density, which make them well-suited for use in dairy wet rooms, slaughterhouses,... [See More]
- Calibrator Style: Handheld; Portable; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: RTD, Thermistor; Thermocouple; Temperature
- Display: Digital Readouts
from OMEGA Engineering, Inc.
CL120 Series Calibration COOL/HEAT Source. The CL120 Series is capable of simultaneous heat and cool sourcing in one unit and is available with either one or two modules. You select the combination of modules: COOL Source only, HEAT Source only, COOL Source and HEAT Source, or two HEAT Sources. Both... [See More]
- Calibrator Style: Handheld; Portable; Modular
- AC Voltage Range: 115 to 230
- Calibration Signal: AC Voltage; DC Voltage; DC Current; Signal / Waveform Generator Output
- DC Voltage Range: 0.0 to 10
from Ralston Instruments, Inc.
NPAK-0000-0-0. Nitropak only, no gauge adapter, no hoses, no process connections. Self contained unit provides a precise nitrogen source for calibrating differential and static pressure instrumentation using an external pressure calibrator. Proprietary pressure balanced fine adjustment piston allows... [See More]
- Calibrator Style: Handheld
- Operating Temp: 0 to 130
- Environmental Properties: Gas; Pressure / Vacuum
from Seaward Group USA
The new Rigel UNI-SiM is truly unique, incorporating 6 vital signs into one handheld simulator. Battery-operated, the UNI-SiM can simulate NiBP, SpO2, ECG wave forms, temperature, respiration and invasive blood pressure simultaneously. The UNI-SiM is the only simulator capable of undertaking six... [See More]
- Calibrator Style: Handheld; Battery Powered
- AC Voltage Range: 110 to 230
- Calibration Signal: AC Voltage
- Other Properties: Blood Pressure Analyzer Calibrator
from Yokogawa Corporation of America
The CA300 Series is a high accuracy source and measure portable handheld calibrator used to inspect and maintain the accuracy of control devices such as temperature controllers, temperature transmitters, temperature sensors and other process devices which are used in process plants, industry... [See More]
- Calibrator Style: Handheld; Battery Powered
- DC Voltage Range: 0.5000 to 50
- Calibration Signal: DC Voltage; DC Current
- DC Current Range: 0.0 to 0.0240
from TEGAM, Inc.
Handheld Thermocouple Calibrator. 4 Thermocouple Types. J / K / T /E +mV. New challenges require new tools. TEGAM has rethought thermocouple calibrators to offer you the performance you need today without complicating your work. The new 940 Series provides laboratory grade calibrations in a highly... [See More]
- Calibrator Style: Handheld; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: Thermocouple; Temperature
- Display: Digital Readouts
from REED-Direct
1/2" (13 mm) LCD display. Includes test leads. SPECIFICATIONS: Range: 0 to 19.99 mA; 0 to 24.0 mA. Resolution: 0.01 mA; 0.1 mA. Sampling Time: 0.4 second. Dimensions: 7.3 x 3 x 1.5" (185 x 78 x 38mm). Weight: 9.4 oz (265g) [See More]
- Calibrator Style: Handheld
- DC Current Range: 1.00E-3
- Calibration Signal: DC Current
- Description (Current): 0 to 19.99 mA; 0 to 24.0 mA
from MTI Instruments Inc.
The 1510A Precision Signal Simulator/Function Generator is a sophisticated two channel, battery powered, microprocessor controlled, direct digital synthesizer with unparalleled accuracy. A USB port allows remote control and programming of the unit. This portable signal generator can be programmed to... [See More]
- Calibrator Style: Handheld; Portable; Battery Powered
- Description (Voltage): 0-9.9999 VAC
- Calibration Signal: AC Voltage; Signal / Waveform Generator Output
- Frequency Range: 1 to 1000
from ValueTronics International, Inc.
The 2500EP is a calibrator from Valhalla Scientific. Electronic calibrations are necessary for maintaining your equipment for general monitoring and testing purposes. Calibrators enable you to solve problems with your equipment on your own, on site. Additional Features: Dynamic Range: 0 to 200% of... [See More]
- Calibrator Style: Handheld
- Environmental Properties: Temperature
from Isotech North America
When high accuracy is not necessary both Isotech's blackbody and greybody offer cost effective solutions for the calibration and testing of infrared thermometers. The Quick Cal Blackbody is ideal for rapid and portable checking of infrared thermometers. The Greybody Model 975 gives fast accurate... [See More]
- Calibrator Style: Handheld
- Other Properties: Radiation Pyrometers
- Environmental Properties: Temperature
- User Interface: Digital Front Panel
from Badger Meter
The Flo-tech Flo-Check ® USB Hydraulic System Analyzer can be used as a stationary or portable tester for both industrial and mobile hydraulic system diagnostics. Portable Tester. Accurate Diagnostics. The Flo-tech Flo-Check ® USB Hydraulic System Analyzer simultaneously measures flow,... [See More]
- Calibrator Style: Handheld; Portable
- Operating Temp: -40 to 185
- Environmental Properties: Flow; Pressure / Vacuum
from Transcat, Inc.
Product Highlights. Wide pressure range. 16 pressure ranges, ranging from 25 mbar (0.35 psi) to 700 bar (10,000 psi) F.S. Absolute, differential and gauge sensors. High accuracy. ±0.025% of reading +0.01% F.S. True field calibrator. Fully temperature compensated. Full set of intelligent... [See More]
- Calibrator Style: Handheld
- Environmental Properties: Pressure / Vacuum
from Cole-Parmer
Handheld Dry-Well Calibrator, with Block A [See More]
- Calibrator Style: Handheld
- Operating Temp: 95 to 707
- Environmental Properties: Temperature
from Beamex Oy Ab
Beamex ® MC2-IS. Intrinsically Safe Multifunction Calibrator. Safe and Practical Field Calibration. Compact and User-friendly: Compact-sized, lightweight portable calibrator with large graphical display, multilingual interface and full numerical keyboard. Calibration is fast and simple. Accuracy... [See More]
- Calibrator Style: Handheld; Modular; Battery Powered
- DC Voltage Range: 24
- Calibration Signal: DC Voltage
- Environmental Properties: Pressure / Vacuum; RTD, Thermistor; Thermocouple; Temperature
from AMETEK Sensors, Test & Calibration
JOFRA HPC500 / HPC502 calibrators feature deadweight tester accuracy in a modern digital package. The HPC is available as an independent calibrator or in one of 6 ready-for-test systems that are complete and equipped to meet any need for pressure calibration. The HPC500 may be used in a very broad... [See More]
- Calibrator Style: Handheld
- User Interface: Digital Front Panel
- Environmental Properties: Pressure / Vacuum
- Display: Digital Readouts
from OMEGA Engineering, Inc.
The Omega CL535 is an excellent tool for calibration, test, and diagnostics of instruments that use frequency signals. Instruments include tachometers, frequency counters, integrators, and any other frequency devices in the shop, plant and/or field. The CL535 brings all the features you would expect... [See More]
- Calibrator Style: Handheld; Portable; Battery Powered
- AC Voltage Range: 240
- Calibration Signal: AC Voltage; DC Current; Signal / Waveform Generator Output
- Description (Voltage): 240VAC
from Ralston Instruments, Inc.
NPAK-4FBA-RG-2m-1m. Nitropak, 1/2" female BSPP gauge adapter, 2m, 1m hoses, (2) 1/4" FBSPP process connections. Self contained nitrogen source includes all connections and hoses to connect directly to a pressure gauge or calibrator. Proprietary pressure balanced fine adjustment piston allows for... [See More]
- Calibrator Style: Handheld
- Operating Temp: 0 to 130
- Environmental Properties: Gas; Pressure / Vacuum
from Yokogawa Corporation of America
The Low Pressure Calibrator CA700 has a basic accuracy of 0.01% of reading on pressure measurement and 0.015% of reading on Current/Voltage source/measurement, which makes it the most accurate calibrator in the portable calibrator class. The CA700 also has the highest resolution and widest range of... [See More]
- Calibrator Style: Handheld; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: Pressure / Vacuum
- Display: Digital Readouts
from TEGAM, Inc.
Calibrator Thermometer. °C & °F (K, J & T). Used by calibration technicians or manufacturing engineers to perform field calibrations on K-J-T thermocouple thermometers. The single input/output meter doubles as a K-J-T thermometer. Technical Specifications. Accuracy : ±0.5... [See More]
- Calibrator Style: Handheld; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: Thermocouple; Temperature
- Display: Digital Readouts
from REED-Direct
0.02% accuracy and 0.001% of span display. Simulate mA and % of span display. Selectable step or ramp outputs. 24V loop power supply. Includes test leads, allligator clips, protective holster, soft carrying case and batteries. SPECIFICATIONS: Measurement Function. Voltage Range: -0.200 to 28.000V. [See More]
- Calibrator Style: Handheld
- DC Voltage Range: 1
- Calibration Signal: DC Voltage
- Description (Voltage): -0.200 to 28.000V
from ValueTronics International, Inc.
The 5520A is a multi-product calibrator from Fluke. Features: Voltage DC Range: 0 to ±1020V. Current DC Range: 0 to ±20.5A. Resistance Range: 0 to 1100 M Ω. Voltage AC Range: 1 mV to 1020V; 10 Hz to 500 kHz, Sine. Current AC Range: 29 mA to 20.5A; 10 Hz to 30 kHz, Sine. [See More]
- Calibrator Style: Handheld
- Environmental Properties: Pressure / Vacuum; RTD, Thermistor; Thermocouple; Temperature
from Isotech North America
The Practical Instrument Electronics Model 512 RTD Calibrator provides direct temperature calibration to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. Also, the Model 512 reads RTD outputs and displays in temperature. It is... [See More]
- Calibrator Style: Handheld; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: RTD, Thermistor; Temperature
- Display: Digital Readouts
from Badger Meter
The Flow Dynamics ® Flow Gator Portable Flow Transfer Standard is designed for use as a portable flow transfer standard (FTS) to calibrate flow meters that cannot be easily removed from their piping system. Portable Calibrator. Field Programmable. The Flow Gator is a portable, documenting,... [See More]
- Calibrator Style: Handheld; Portable
- Environmental Properties: Flow
from Transcat, Inc.
Product Highlights. Transmitter loop measurement, 24 volt DC loop supply and HART ® resistor. Easy pressure switch test. Opening and closing pressures are automatically recorded and deadband is calculated. All is presented in a large graphical display. Offers a selection of useful features:... [See More]
- Calibrator Style: Handheld
- Environmental Properties: Pressure / Vacuum
from Cole-Parmer
bull; Combines an easy <endash >to <endash >use and comfortable <endash >to <endash >carry calibrator with incredible accuracy. • Generate up to 300 psi (20 bar) in less than 30 seconds, and pull 95% vacuum. • Set up any application in three touches via touch... [See More]
- Calibrator Style: Handheld; Battery Powered
- Environmental Properties: Pressure / Vacuum
from AMETEK Sensors, Test & Calibration
The HPC600 can be used in a very wide range of applications from simple tool type jobs to complex calibration jobs in custody transfer systems. A time and money saver!. The JOFRA APM series of pressure modules extends the application base of the HPC calibrators by allowing calibrations in additional... [See More]
- Calibrator Style: Handheld
- User Interface: Digital Front Panel
- Environmental Properties: Pressure / Vacuum
- Display: Digital Readouts
from OMEGA Engineering, Inc.
The OMEGA CL20 series calibrator/ thermometers simulate, measure and record RTD, ohm, thermocouple and thermistor signals –all in one meter. They outperform the competition in the lab and on the factory floor with 0.3 °C (0.5 °F) accuracy and in ambient temperatures from 18 to 28... [See More]
- Calibrator Style: Handheld; Portable; Battery Powered
- AC Voltage Range: 115
- Calibration Signal: AC Voltage
- Description (Voltage): 115VAC
from Ralston Instruments, Inc.
NPAK-2FBA-RG-2m-1m. Nitropak, 1/4" female BSPP gauge adapter, 2m, 1m hoses, (2) 1/4" FBSPP process connections. Self contained nitrogen source includes all connections and hoses to connect directly to a pressure gauge or calibrator. Proprietary pressure balanced fine adjustment piston allows for... [See More]
- Calibrator Style: Handheld
- Operating Temp: 0 to 130
- Environmental Properties: Gas; Pressure / Vacuum
from Yokogawa Corporation of America
The CA150 Handy Calibrator is a comprehensive source and measure instrument for your calibration and equipment checking needs at maintenance sites. The CA150 can simultaneously source and measure voltage, current, resistance, Thermocouple, RTD, and Pulse signals. [See More]
- Calibrator Style: Handheld; Battery Powered
- DC Voltage Range: 0.1000 to 30
- Calibration Signal: DC Voltage; DC Current
- DC Current Range: 0.0220
from TEGAM, Inc.
Calibrator Thermometer. °C & °F (Multi T/C's). Used by calibration technicians or manufacturing engineers to perform field calibrations on K-J-T-E-N-B-R-S-G-C and D-type thermocouple thermometers in the lab or out in the field. This device is a handy verification tool for QA inspectors... [See More]
- Calibrator Style: Handheld; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: Thermocouple; Temperature
- Display: Digital Readouts
from REED-Direct
Accurate to 0.02%. Simulates and reads 3 RTDs and 8 thermocouples. Measures 2 or 3-wire RTDs. Compatible with 32 pressure modules from 2.5kPa to 70MPa. 24V loop power supply. Provides 25% or 100% step output for DC current either manually or automatically. Large 2-line LCD with whie LED backlight. [See More]
- Calibrator Style: Handheld
- DC Voltage Range: 1.00E-3 to 1
- Calibration Signal: DC Voltage; DC Current
- Description (Voltage): 50, 100, 500 mV, 1, 5, 10, 50 V
from ValueTronics International, Inc.
The 9100S-B-156 is a calibrator from Fluke. Features: Temperature range to 375 °C (707 °F) is perfect for checking RTDs, thermocouples, and small bimetal thermometers in the field. With a proprietary Hart Scientific temperature controller, it has a display resolution of 0.1 °, an... [See More]
- Calibrator Style: Handheld
- Environmental Properties: RTD, Thermistor; Thermocouple; Temperature
from Badger Meter
The Preso GM Portable Gauge Kit includes a direct readout meter and all accessories in a hard-side carrying case. These compact, lightweight kits are suitable for DP measurement across Venturis, pitot tubes, orifice plates, filters and heat exchangers. [See More]
- Calibrator Style: Handheld; Portable
- Environmental Properties: Pressure / Vacuum
from Transcat, Inc.
Product Highlights. Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges,... [See More]
- Calibrator Style: Handheld
from AMETEK Sensors, Test & Calibration
The JOFRA mAcal mA loop calibrator generates and measures the current in the loop on 2-wire transmitters including 24 VDC loop supply. The built-in functions contribute to control time saving, process optimization, safe measurements and reduced costs. [See More]
- Calibrator Style: Handheld; Battery Powered
- DC Current Range: 1.00E-3
- Calibration Signal: DC Current
- Description (Current): 0 to 24 mA
from OMEGA Engineering, Inc.
Vertical Handheld Calibrator. Easy-to-hold vertical body is designed to make it intuitively easy to operate, as individual functions are accessed directly by pressing assigned keys. The main body case (sold separately) is designed to make it easy to hold the CA150 in one hand. Simultaneous Source... [See More]
- Calibrator Style: Handheld; Portable; Battery Powered
- AC Voltage Range: 100 to 240
- Calibration Signal: AC Voltage; DC Voltage; AC Current; DC Current; Signal / Waveform Generator Output
- DC Voltage Range: 12
from Ralston Instruments, Inc.
NPAK-2FBA-6-3. Nitropak, 1/4" female NPT gauge adapter, 6ft, 3ft hoses, (2) 1/4" MNPT process connections. Self contained nitrogen source includes all connections and hoses to connect directly to a pressure gauge or calibrator. Proprietary pressure balanced fine adjustment piston allows for... [See More]
- Calibrator Style: Handheld
- Operating Temp: 0 to 130
- Environmental Properties: Gas; Pressure / Vacuum
from Yokogawa Corporation of America
The CA71 Portable Calibrator is a small, lightweight, multifunction calibrator that can simultaneously source and measure voltage, current, resistance, TC, RTD, frequency, and pulse signals. The Handy Calibrator incorporates rotary switches for simple handling. Just open the carrying case cover and... [See More]
- Calibrator Style: Handheld; Battery Powered
- AC Voltage Range: 0.0 to 300
- Calibration Signal: AC Voltage; DC Voltage; DC Current
- DC Voltage Range: 0.0 to 30
from TEGAM, Inc.
Calibrator Thermometer. °C & °F. (K, J, T, & E, Ohms, 100 Ohms RTD & Thermistor). The ideal solution for anyone that needs a handheld, multi-purpose calibrator to perform field or lab tests on temperature probes or thermometers. These meters will simulate, source, measure and... [See More]
- Calibrator Style: Handheld; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: RTD, Thermistor; Thermocouple; Temperature
- Display: Digital Readouts
from REED-Direct
Instantly determine if your device needs calibration or if a sensor needs to be replaced. Complete with 9V battery, vinyl pouch case and 60" calibration cable terminated with subminiature connector. SPECIFICATIONS: Temperature Ranges: 32 °F (0 °C), 212 °F (100 °C), 932 °F (500... [See More]
- Calibrator Style: Handheld
- User Interface: Analog Front Panel
- Environmental Properties: Temperature
- Display: Digital Readouts
from ValueTronics International, Inc.
The 9102S is a calibrator from Fluke. Electronic calibrations are necessary for maintaining your equipment for general monitoring and testing purposes. Calibrators enable you to solve problems with your equipment on your own, on site. Additional Features: HDRC Handheld Dry-Well. Smallest dry-wells... [See More]
- Calibrator Style: Handheld
- Environmental Properties: RTD, Thermistor; Thermocouple; Temperature
from Badger Meter
The Flo-tech MC4000 Diagnostic Tester is a handheld hydraulic analyzer that offers instant and recordable diagnostics. Instant Diagnostics. Recordable Measurements. The Flo-tech MC4000 handheld hydraulic system analyzer offers instant and recordable diagnostics with built-in data logging. Sensor... [See More]
- Calibrator Style: Handheld; Portable
- Operating Temp: -4 to 300
- Environmental Properties: Flow; Pressure / Vacuum
from Transcat, Inc.
Product Highlights. Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges,... [See More]
- Calibrator Style: Handheld
from AMETEK Sensors, Test & Calibration
The ASC300 is substantial enough to cover all needs for a process signal. calibrator with superior accuracy and compact enough to fit into the tool. box and operate with one hand for easy field calibration. The ASC300 can change the entire calibration regimen for signal, pressure,. and temperature. [See More]
- Calibrator Style: Handheld; Battery Powered
- DC Voltage Range: 1
- Calibration Signal: DC Voltage; DC Current
- Description (Voltage): 0-20 V DC
from OMEGA Engineering, Inc.
The CL3515R is a portable calibrator/thermometer with a 4-digit LCD. It is designed to use external K/J/T/E/R/S/N/L/U/B/C type thermocouples as temperature sensors. OMEGA ® offers a complete selection of thermocouples, or we can custom-design parts to meet your specifications. The thermometer... [See More]
- Calibrator Style: Handheld; Portable; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: Thermocouple; Temperature
- Digital Interface: Serial Interface
from Ralston Instruments, Inc.
NPAK-2MBA-6-3. Nitropak, 1/4" male NPT gauge adapter, 6ft, 3ft hoses, (2) 1/4" MNPT process connections. Self contained nitrogen source includes all connections and hoses to connect directly to a pressure gauge or calibrator. Proprietary pressure balanced fine adjustment piston allows for extremely... [See More]
- Calibrator Style: Handheld
- Operating Temp: 0 to 130
- Environmental Properties: Gas; Pressure / Vacuum
from TEGAM, Inc.
Calibrator Thermometer. °C & °F. (Multi T/Cs, Ohms, 100 Ohms & 1000 Ohms RTD). The ideal solution for anyone that needs a hand held, multi-purpose calibrator to perform field or lab tests on temperature probes or thermometers. The 855 meter will simulate, source, measure and record... [See More]
- Calibrator Style: Handheld; Battery Powered
- User Interface: Digital Front Panel
- Environmental Properties: RTD, Thermistor; Thermocouple; Temperature
- Display: Digital Readouts
from REED-Direct
6-digit LCD readout. Automatic calibration. User settable auto power off. Includes test leads with alligator clips, 9V battery, instruction manual and soft carrying case. SPECIFICATIONSVoltage Range/Resolution: -10.00 to 110.00mV/0.01mV; -100.00 to 1100.0mV/0.1mV. Resistance Range/Resolution: 0.0 to... [See More]
- Calibrator Style: Handheld
- User Interface: Digital Front Panel
- Environmental Properties: Temperature
- Display: Digital Readouts
from ValueTronics International, Inc.
The METRAHIT CAL is a calibrator from Gossen Metrawatt. Features: Universal calibrator, simulator mA / mV...V / °C/ °F (Pt100/1000, Ni100/1000, thermocouples: J, L, T, U, K, E, S, R, B, N) / 5...2000 Ω. Frequency generator: 1 Hz...1000 Hz. Ramp and staircase functions. Easy operation. [See More]
- Calibrator Style: Handheld
- Environmental Properties: Thermocouple; Temperature