24 Thermocouple Elements
from Pyromation
The temperature sensors illustrated below are generally used for surface temperature measurement. The series SS and ST spade thermocouples are sandwiched between two thin shims of either stainless steel or two pieces of fiberglass tape. They can be attached using a worm drive hose clamp or by... [See More]
- Gauge: 24
- Style: Full Length 2-hole Insulator; Flexible Style (Angled)
- Thermocouple Type: E (optional feature); J (optional feature); K (optional feature); T (optional feature)
- Insulation / Sheath Material: Fiberglass
from Glas-Col, LLC
Choose features to match application. These thermocouples, available in a variety of sizes and constructions, are for use with Glas-Col temperature controls and the digital thermometer. Thermocouples are type J unless identified differently in catalog number. [See More]
- Gauge: 24
- Length: 48
- Thermocouple Type: J
- Style: Flexible Style (Angled)
from Ultra Energy
26X-Insulated Noble Metal Element, Industrial Temperature Sensor, Thermocouple. High Temperature Noble Metal Thermocouples. Elements are supplied to match the ITS 1990 curve. 24 ga. (0.020 ″) wire is standard – other gauges are available. Insulators are made of Alumina, Mullite, or... [See More]
- Gauge: 24
- Style: Full Length 2-hole Insulator
- Thermocouple Type: B (optional feature); S (optional feature); R (optional feature)
- Insulation / Sheath Material: Alumina (optional feature); Ceramic (optional feature); Mullite (optional feature)
from Nanmac Corporation
NOTES: When ordering, specify Part No. and fill in the four letter blocks. For stainless steel over braid add the suffix SS to the Part No. Example: A14B-2-K-20-36 (specifies a style 2 thermocouple with spade lugs on cold end, type k, gage #20 and an overall length of 36 inches). When ordering,... [See More]
- Gauge: 20; 24; 20, 24, 30
- Style: Bare Wire; Flexible Style (Angled)
- Thermocouple Type: E; J; K; N; T
- Insulation / Sheath Material: Fiberglass; Fiberglass, Stainless Steel
from Acrolab Ltd.
Noble metal thermocouple elements are designed as replacem ent elements for use in high temperature protection tube assem blies. Various calibrations, gauges, insulator styles and juncti ons are available. [See More]
- Gauge: 24; 26
- Insulation / Sheath Material: Alumina
- Thermocouple Type: B; S; R
from OMEGA Engineering, Inc.
These PFA insulated thermocouple wire sensors are hermetically sealed at the sensor tip to provide continuous PFA protection over the measurement junction. This hermetic seal design provides a small, flexible, and electrically isolated thermocouple, suited to a variety of applications. [See More]
- Gauge: 24
- Length: 39
- Thermocouple Type: E (optional feature); J (optional feature); K (optional feature); T (optional feature)
- Style: Full Length Single-hole Insulator
from Ultra Energy
27X-Insulated Noble Metal Element w-Collar, Industrial Temperature Sensor, Thermocouple. High Temperature Noble Metal Thermocouples. Elements are supplied to match the ITS 1990 curve. 24 ga. (0.020 ″) wire is standard – other gauges are available. Insulators are made of Alumina, Mullite,... [See More]
- Gauge: 24
- Style: Full Length 2-hole Insulator
- Thermocouple Type: B (optional feature); S (optional feature); R (optional feature)
- Insulation / Sheath Material: Alumina (optional feature); Ceramic (optional feature); Mullite (optional feature)
from Nanmac Corporation
Our Industrial Base Metal Thermocouples offer a wide variety of ceramic insulated thermocouples in a large selection of wire sizes. All standard thermocouples (types E, J, K & T) come with a standard length of 12 inch leads. Noble metal and refractory wire elements (types B, C, D, R & S)... [See More]
- Gauge: 8; 14; 20; 24; 8, 14, 20, 24
- Length: 12 to 36
- Thermocouple Type: E; J; K; N; T
- Style: Bare Wire