Diffusion / Vapor High Vacuum Pumps
from Agilent Technologies - Vacuum Products
The Agilent AX-65 Oil diffusion pump is the smallest diffusion pump available in the market and the only pump that is air-cooled. Its vertical finned boiler and high power provide stable pumping and high helium pumping speed. This pump can be ordered with a cold cap or a dense baffle. The pump... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-8 to 0.0029
- Configuration: Individual Vacuum Pump
- Pumping Speed: 138 to 191
from Agilent Technologies - Vacuum Products
The Agilent HS-16 Oil Diffusion Pump is a pump with high throughput and high pumping speed of 6000 L/s. With its fully optimized vapor jet, the robust boiler design and the thermal protection switches the pump will run without any maintenance for many years. It is available with 16 in. ASA or ISO... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-8 to 9.75E-4
- Configuration: Individual Vacuum Pump
- Pumping Speed: 12713 to 15892
from Agilent Technologies - Vacuum Products
The Agilent HS-2 Oil Diffusion Pump is a pump with high throughput and high pumping speed of 160 L/s air, 200 L/s He, H2. With its fully optimized vapor jet and the robust boiler design, the pump will run without any maintenance for many years. It is available with an ASA inlet flange and with 120V... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-8 to 0.0037
- Configuration: Individual Vacuum Pump
- Pumping Speed: 339 to 424
from Agilent Technologies - Vacuum Products
The Agilent HS-20 Oil Diffusion Pump is a pump with a high throughput and high pumping speed of 10,000 L/s. With its fully optimized vapor jet, robust boiler design and thermal protection switches, the pump will run without any maintenance for many years. It is available with 20 in. ASA or ISO 630K... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-8 to 0.0013
- Configuration: Individual Vacuum Pump
- Pumping Speed: 21189 to 26486
from Agilent Technologies - Vacuum Products
The Agilent HS-32 Oil Diffusion Pump is a pump with high throughput and high pumping speed of 32,000 L/s. With its fully optimized vapor jet, robust boiler design and thermal protection switches, the pump will run without any maintenance for many years. It is available with 32 in. ASA or ISO 800F... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-8 to 0.0013
- Configuration: Individual Vacuum Pump
- Pumping Speed: 36657 to 45821
from Agilent Technologies - Vacuum Products
The Agilent NHS-35 Oil Diffusion Pump is a pump with high throughput and high pumping speed of 50,000 L/s. With its fully optimized vapor jet, robust boiler design and thermal protection switches, the pump will run without any maintenance for many years. It is available with 35 in. ASA or ISO 1000F... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-8 to 0.0013
- Configuration: Individual Vacuum Pump
- Pumping Speed: 59329 to 74161
from Agilent Technologies - Vacuum Products
The VHS-10 Diffusion Pump has a pumping speed of up to 3650 L/s and can be ordered with ASA or ISO flanges, standard or extended cold caps, and a variety of voltages. The patented Bulge Contour increases gas capture and maintains lower pressure. All VHS series pumps have sight glass/fill and drain... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-9 to 0.0015
- Configuration: Individual Vacuum Pump
- Pumping Speed: 7734 to 9662
from Agilent Technologies - Vacuum Products
The VHS-250 Diffusion Pump has a pumping speed of up to 2125 L/s. All VHS series pumps have sight glass/fill and drain assemblies for continuous monitoring and easy maintenance of pump fluid. The patented Bulge Contour increases gas capture and maintains lower pressure. Finned boilers increase... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-9 to 0.0012
- Configuration: Individual Vacuum Pump
- Pumping Speed: 4503 to 5636
from Agilent Technologies - Vacuum Products
The VHS-4 Diffusion Pump has a pumping speed of up to 750 L/s and can be ordered with ASA or ISO flanges, standard or extended cold caps, with a variety of voltages. All VHS pumps have a stainless steel pump body and a sight glass/fill and drain assembly for continuous monitoring and easy... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-9 to 0.0020
- Configuration: Individual Vacuum Pump
- Pumping Speed: 1589 to 1992
from Agilent Technologies - Vacuum Products
The VHS-400 Diffusion Pump has a pumping speed of up to 4500 L/s. All VHS series pumps have sight glass/fill and drain assemblies for continuous monitoring and easy maintenance of pump fluid. The patented Bulge Contour increases gas capture and maintains lower pressure. Finned boilers increase... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-9 to 0.0014
- Configuration: Individual Vacuum Pump
- Pumping Speed: 9535 to 11919
from Agilent Technologies - Vacuum Products
The VHS-6 Diffusion Pump has a pumping speed of up to 1550 L/s and can be ordered with ASA or ISO flanges, standard or extended cold caps, with a variety of voltages. All VHS series pumps have sight glass/fill and drain assemblies for continuous monitoring and easy maintenance of pump fluid. The... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Ultimate Vacuum: 4.88E-9 to 0.0015
- Configuration: Individual Vacuum Pump
- Pumping Speed: 3284 to 4089
from Edwards Vacuum
The model EO50/60 is a compact, fast warm-up air-cooled diffusion pump supplied complete with high integrity inlet Co-Seal, flange clamping ring and optional baffle. The jet assembly is removable for easy cleaning. It meets the need for a low-cost, high vacuum pump for use in desk top or mobile... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 57.21 to 148
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The Diffstak design has been proven over many years with thousands of pumps installed. The cryo-cooled versions (CR - model pumps) have a liquid nitrogen cooled baffle supplied from a reservoir attached to the pump and are intended for pumping heavy vapor loads. This pump has a manually operated... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 487 to 1907
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The Diffstak design has been proven over many years with thousands of pumps installed. The cryo-cooled versions (CR - model pumps) have a liquid nitrogen cooled baffle supplied from a reservoir attached to the pump and are intended for pumping heavy vapor loads. This pump has a pneumatically... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 487 to 1907
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The Diffstak design has been proven over many years with thousands of pumps installed. The cryo-cooled versions (CR - model pumps) have a liquid nitrogen cooled baffle supplied from a reservoir attached to the pump and are intended for pumping heavy vapor loads. This pump has a pneumatically... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 1271 to 4238
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The Diffstak design has been proven over many years with thousands of pumps installed. The cryo-cooled versions (CR - model pumps) have a liquid nitrogen cooled baffle supplied from a reservoir attached to the pump and are intended for pumping heavy vapor loads. This pump has a pneumatically... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 1271 to 4238
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The Diffstak design has been proven over many years with thousands of pumps installed. The cryo-cooled versions (CR - model pumps) have a liquid nitrogen cooled baffle supplied from a reservoir attached to the pump and are intended for pumping heavy vapor loads. This pump has a manually operated... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 3602 to 12713
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The Diffstak design has been proven over many years with thousands of pumps installed. The cryo-cooled versions (CR - model pumps) have a liquid nitrogen cooled baffle supplied from a reservoir attached to the pump and are intended for pumping heavy vapor loads. This pump has a pneumatically... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 3602 to 12713
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The Diffstak design has been proven over many years with thousands of pumps installed. The cryo-cooled versions (CR - model pumps) have a liquid nitrogen cooled baffle supplied from a reservoir attached to the pump and are intended for pumping heavy vapor loads. This pump has a manually operated... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 254 to 403
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The Diffstak design has been proven over many years with thousands of pumps installed. The cryo-cooled versions (CR - model pumps) have a liquid nitrogen cooled baffle supplied from a reservoir attached to the pump and are intended for pumping heavy vapor loads. This pump has a pneumatically... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 254 to 403
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The HT high throughput series is the pinnacle of our diffusion pump knowledge with technology aimed specifically at industrial users. Edwards HT10 (ANSI10/ISO320 inlet) diffusion pump is designed for all light and heavy duty industrial applications. The robust construction gives high pumping speed... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 6357 to 9853
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The HT high throughput series is the pinnacle of our diffusion pump knowledge with technology aimed specifically at industrial users. Edwards HT16B (ANSI16/ISO5000 inlet) diffusion pump is designed for all light and heavy duty industrial applications. The robust construction gives high pumping speed... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 13773 to 24537
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The HT high throughput series is the pinnacle of our diffusion pump knowledge with technology aimed specifically at industrial users. Edwards HT20B (ANSI20/ISO630 inlet) diffusion pump is designed for all light and heavy duty industrial applications. The robust construction gives high pumping speed... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 16951 to 38140
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 100 (ISO100 inlet) design has been proven over... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 593 to 1059
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 100 (ISO100 inlet) design has been proven over... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 593 to 1059
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 160 (ISO160 inlet) design has been proven over... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 1483 to 2755
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 160 (ISO160 inlet) design has been proven over... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 1483 to 2755
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 250 (ISO250 inlet) design has been proven over... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 4238 to 6357
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 63 (ISO63 inlet) design has been proven over many... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 286 to 424
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)
from Edwards Vacuum
The compact water-cooled Diffstak pumps with an integral cooled baffle offer exceptionally clean pumping with very low backstreaming, reduced outgassing, and a reduction in the number of elastomer seals required for installation. The Edwards Diffstak 63 (ISO63 inlet) design has been proven over many... [See More]
- UHV / High Vacuum: Diffusion or Vapor
- Pumping Speed: 318 to 477
- Configuration: Individual Vacuum Pump
- Backing Pump: Backing Pump Required (Sold Separately)