Fuel (Liquid) Nozzles
from ABB Measurement & Analytics
Flow nozzles do not rely on a sharp edge (which can degrade over time) to maintain accuracy and therefore offer excellent long-term accuracy with less wear and reduced possibility of distortion. They are often used for flow testing on steam-raising plant. A flow nozzle can measure higher flow rates... [See More]
- Media: Air; Fuel: Liquid; Oil; Steam; Water
- Material: Stainless
- Form: In-line
from WEH Technologies Inc.
The WEH ® TK17 H2 70 MPa with exchangeable nozzle receiver was developed for refueling cars with compressed hydrogen (CGH2). The fueling nozzle provides the same proven characteristics as the actual known TK17 H2 70 MPa. The IR data interface which is located at the front part of the fueling... [See More]
- Media: Fuel: Liquid
- Maximum Pressure: 18202
- Application: Fuel
- Temperature Range: -40 to 185
from Badger Meter
Cox Series 220 Sonic Nozzles are mass flow instruments designed for the accurate measurement and control of gas flow. Common applications of the sonic nozzle include use as a calibration standard, gas flow meter, flow controller and flow limiting device. Accurate Measurement. Exceptional... [See More]
- Media: Fuel: Liquid
- Orifice Size: 110 to 1000
- Maximum Pressure: 0.0 to 3000
from Jiangyin Deli Laser Solutions Co., Ltd.
Fuel injectors/injector nozzles/ fuel spray nozzles. Apply to automobile injectors and other fuel spay application. Hole diameter: >30micron. Max depth-diameter ratio: 20:1. Positive taper, straight holes(Zero taper), negative taper available. No burs and thermal effect zoon, smooth sidewall. [See More]
- Media: Fuel: Liquid
- Orifice Size: 0.0 to 1.18
- Application: Fuel
- Form: In-line
from WEH Technologies Inc.
WEH offers the fueling system type TS50 CNG for retrofitting of vehicles to run on compressed natural gas. The TS50 CNG fueling system is a CNG conversion kit for quick and easy installation into the vehicle. The two housings can be preinstalled within seconds. The final installation is possible... [See More]
- Media: Fuel: Liquid
- Maximum Pressure: 3000
- Application: Fuel
- Temperature Range: -40 to 248
from WEH Technologies Inc.
A WEH ® fueling system for refueling buses and trucks is also available. The TS55 CNG consists of a fully assembled housing with an integrated large receptacle and enables easy retrofitting of buses and trucks to compressed natural gas. The converted vehicle can be easily refuelled from the... [See More]
- Media: Fuel: Liquid
- Maximum Pressure: 3000
- Application: Fuel
- Temperature Range: -40 to 248
from WEH Technologies Inc.
Adaptor Nozzle TK22N CNG for CNG fast filling of buses/trucks at car fueling stations (NGV1). Adaptor nozzle for refueling buses and trucks having a NGV2 (non standardized denomination for ISO 14469-2) receptacle profile (e.g. TN5 CNG) at car fueling stations with a fueling nozzle acc. to NGV1... [See More]
- Media: Fuel: Liquid
- Maximum Pressure: 3000
- Application: Fuel
- Temperature Range: -40 to 185
from WEH Technologies Inc.
Adaptor Nozzle TK4 NZ CNG for cars - NGV1 to NZ Standard. Fueling nozzles must be adapted to country-specific standards as the NGV1 standard is not yet used worldwide. We, therefore, designed our TK4 NZ CNG Fueling Nozzle for refueling vehicles with NGV1 standard at fueling stations with NZ standard... [See More]
- Media: Fuel: Liquid
- Maximum Pressure: 3000
- Application: Fuel
- Temperature Range: -40 to 185
from WEH Technologies Inc.
Adaptor Receptacle TN1 NZ CNG for cars - NZ standard to NGV1. Fueling products must be adapted to country-specific standards as the NGV1 standard is not yet used worldwide. We, therefore, designed our TN1 NZ CNG fueling receptacle for refueling vehicles with NZ standard at NGV1 fueling stations in... [See More]
- Media: Fuel: Liquid
- Maximum Pressure: 3000
- Application: Fuel
- Temperature Range: -40 to 248
from WEH Technologies Inc.
Defueling nozzle for evacuating and discharging CNG. The TK23 CNG defueling nozzle is designed specifically for evacuating and discharging CNG of cylinder bundles (e.g. on trailers). The type TK23 CNG is equipped with a pin, which opens the check valve in the type TN5 CNG receptacle (without filter)... [See More]
- Media: Fuel: Liquid
- Maximum Pressure: 3000
- Application: Fuel
- Temperature Range: -40 to 185
from WEH Technologies Inc.
TK1 Slow Fill fueling nozzle for CNG refueling of cars (DN 4 mm). The TK1 CNG fueling nozzle is designed specifically for time filling of vehicles with 'Fuelmaker' compressors and is best suited for this application. The TK1 CNG is now even easier to operate. The clamping jaws are opened when the... [See More]
- Media: Fuel: Liquid
- Maximum Pressure: 3600
- Application: Fuel
- Temperature Range: -40 to 185