Coolant Nozzles
from Lechler, Inc.
The Series 136 AirMist nozzles are most appropriate when there is a need to finely atomize low viscous fluids, such as water. This series provides the finest atomization any of our nozzles can provide. AirMists are therefore most suitable for applications such as humidifying, cooling, and coating. [See More]
- Media: Air; Ink; Hydraulic; Water
- Flow: 0.1300 to 0.6200
- Application: Painting; Humidification; Chemical Industry, Cooling, Atomization of Viscous Liquids
- Maximum Pressure: 9 to 87
from Pneumadyne, Inc.
The modular design of Pneumadyne's Air Jet system makes it adaptable to an unlimited number of applications. Originally developed for increasing the productiving of vibratory feeders, Air Jets are also used in a wide variety of cooling, lubricating and moving applications. Six configurations of the... [See More]
- Media: Air; Hydraulic
- Angle: 0 to 90
- Application: Cleaning
- Orifice Size: 62.5
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
- Inlet: 0.167 in
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: ABO Series air blow-off nozzles project a. flat fan-shaped curtain of gas in a direction. parallel to the axis of the nozzle body. Gases. most commonly used are air and steam. ABO. nozzles are designed with large maximum free. passage sizes to reduce clogging and minimize. the... [See More]
- Media: Air; Hydraulic; Steam
- Flow: 301 to 28276
- Application: Cleaning; Spray Drying
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Low flow, air atomizing spray nozzles [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 19.8 to 66
- Application: Painting; Air Atomizing
- Maximum Pressure: 55
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
- Inlet: 1.000 in
from BEX Spray Nozzles
Spray Characteristics: Full cone spray pattern with a distribution that is heavier in the middle. Spray angle remains nearly constant at pressures between 20 and 80 psi. Construction: CCS nozzles are machined from bar, and consist of a one piece body, plus a non-removable insert. Standard material... [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 100
- Flow: 36.6 to 636
- Pattern: Solid Cone
from BETE Fog Nozzle, Inc.
Design Features. Three-piece construction. Interchangeable spray tips. Integral strainer available (please refer to the Accessories PDF for more information). Male and female connections. Spray Characteristics. Relatively coarse atomization. Uniform distribution with tapered edges for use in... [See More]
- Media: Air; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 0.1800 to 1.92
- Application: Painting; Lubrication
- Maximum Pressure: 500
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
- Inlet: 0.063 in
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A wide, flat fan-shaped spray with low impact. The spray is deflected 75 ° away from the centerline of the pipe connection, as shown. TYPICAL APPLICATIONS: Wherever a low impact, wide angle spray is required. - Rinsing and Cooling. - Dishwashing. - Fertilizer Spraying. -... [See More]
- Media: Hydraulic; Water
- Flow: 1.8 to 396
- Application: Cleaning
- Maximum Pressure: 60
from BETE Fog Nozzle, Inc.
Design Features. Standard three-piece construction. Optional 50- or 100-mesh strainer (please refer to the Accessories PDF for more information). Protective cover available. Male and female connections. Interchangeable spray tips. Spray Characteristics. Spray Patterns: Full (F) or Hollow Cone (H). [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 7.8 to 22.8
- Application: Painting
- Maximum Pressure: 100
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
from BEX Spray Nozzles
Spray Characteristics: Full cone spray pattern, with uniform distribution throughout the cone. Construction: All models have female NPT connection, and consist of a one piece body plus an internal insert. Standard materials are machined 316 stainless steel or cast 316 stainless steel. Typical... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 234 to 58080
- Application: Cleaning
- Maximum Pressure: 150
from BETE Fog Nozzle, Inc.
Design Features. One-piece construction. Clog-resistant. Durable. 3/8" FFs in Brass are available with UL approval; 3/8" FF187145 in Brass is available with FM approval. Male connection. Spray Characteristics. Extra-wide 145 ° spray angle. Medium-impact spray. Spray discharge deflected 75 °... [See More]
- Media: Air; Chemical; Hydraulic; Steam; Water
- Flow: 0.8400 to 6.72
- Application: Cleaning; Fire; Electronic Etching, Food Processing
- Maximum Pressure: 200
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
- Inlet: 0.063 in
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Foam Breaking. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
- Flow: 7.2 to 930
- Pattern: Solid Cone
from BETE Fog Nozzle, Inc.
Design Features. Takes no more room than pipe plug, yet performs like full-size nozzle. Small projection. Can be used with standard pipe couplings to form female nozzle, with elbows to form right angle nozzle, or with tees or crosses for multiple installations. Male connection. Metal and plastic... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 4836 to 25140
- Application: Distribution, Packing
- Maximum Pressure: 100
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
- Inlet: 0.100 in
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Full cone spray pattern, with uniform distribution throughout the square cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
- Flow: 18 to 834
- Pattern: Square
from BETE Fog Nozzle, Inc.
Design Features. One-piece construction. No internal parts. Sizes for all applications. Male connection. Spray Characteristics. High impact. Uniform distribution with tapered edges for overlapping sprays. Extra-wide angles available. Spray pattern: Fan and Straight Jet. Spray angles: 0 ° to 120... [See More]
- Media: Air; Chemical; Ink; Hydraulic; Water
- Flow: 1.8 to 19.2
- Application: Cleaning; Painting; Lubrication
- Maximum Pressure: 400
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A wide angle Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
- Flow: 13.8 to 1044
- Pattern: Solid Cone
from BETE Fog Nozzle, Inc.
Design Features. Dovetail joint guarantees alignment of interchangeable tips. Dimensionally compatible with standard dovetail systems. Tips offset 5 ° or 15 ° for overlapping spray patterns. Tapered overlapping spray provides uniform coverage. Male, female and welded connections. Other sizes... [See More]
- Media: Air; Chemical; Ink; Hydraulic; Steam; Water
- Flow: 2.94 to 18.6
- Application: Cleaning; Painting; Lubrication
- Maximum Pressure: 400
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
- Inlet: 0.040 in
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern, emerging at right angles to the centerline of the pipe connection. The standard included angle of the spray cone is 70 ° at 10 p.s.i. At low pressures hollow cone nozzles produce medium size, uniform droplets. At higher pressures finer droplets... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 5.4 to 2280
- Application: Cleaning; Humidification
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. Extremely short length for minimum projection and maximum clearance. Produces a flat fan spray pattern available in a variety of spray angles. Available in straight (parallel) threads only, NPS and BSPP. Requires gasket to seal connection. Spray Characteristics. Spray pattern: Fan. [See More]
- Media: Air; Chemical; Ink; Hydraulic; Steam; Water
- Flow: 2.4 to 16.8
- Application: Cleaning; Painting; Lubrication
- Maximum Pressure: 200
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Foam Breaking. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
- Flow: 7.2 to 930
- Pattern: Solid Cone
from BETE Fog Nozzle, Inc.
Design Features. Advanced whirl plate design produces uniform coverage. Male and female connections. Spray Characteristics. Medium to coarse atomization. Spray pattern: Full Cone. Square pattern available. Spray angles: 30 °, 60 °, 90 ° and 120 ° standard. Flow rates: 0.13 to 59 gpm... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 7.8 to 44.4
- Application: Cleaning
- Maximum Pressure: 400
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A wide angle Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
- Flow: 13.8 to 1044
- Pattern: Solid Cone
from BETE Fog Nozzle, Inc.
Design Features of XAAD Pressure-fed, Internal Mix, Wide Angle Round, Air Atomizing Spray Nozzles: Internal mix. Very fine atomization. Moderate forward spray projection. Spray Patterns of XAAD Pressure-fed, Internal Mix, Wide Angle Round, Air Atomizing Spray Nozzles: 70 ° Hollow Cone [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 0.5000 to 3
- Application: Painting; Humidification; Misting, Odor Control, Moistening
- Maximum Pressure: 60
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
- Inlet: 0.375 in
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: The HNS series vaneless full-cone nozzle projects a medium to coarse full-cone spray in a direction perpendicular to the nozzle inlet axis. The maximum free passage in this nozzle is substantialy larger than most full-cone nozzles due to the "vaneless" design. this nozzle is... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 21 to 1500
- Application: Cleaning
- Maximum Pressure: 125
from BETE Fog Nozzle, Inc.
Design Features. External mix: allows spraying of viscous materials. Variable atomization. Moderate spray angle (60 ° to 90 °). Precise metering of the liquid flow rate [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 0.8000 to 2.8
- Application: Painting; Humidification; Misting, Odor Control, Moistening
- Maximum Pressure: 40
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
- Material: Acetal copolymer
- Inlet: 3.000 in
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern, similar to the BEX H series, but with a wider spray angles. The included angle of the spray cone is 120 ° at 10 p.s.i. TYPICAL APPLICATIONS: - Water Cooling. - Roof Cooling. - Air Cooling. - Air Washing [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 7.2 to 1680
- Application: Cleaning
- Maximum Pressure: 125
from BETE Fog Nozzle, Inc.
Design Features. Internal Mix. Deflected flat fan spray pattern [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 1.5 to 7.4
- Application: Painting; Humidification; Misting, Odor Control, Moistening
- Maximum Pressure: 60
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: ILH series in-line hollow cone spray nozzles produce a very evenly distributed hollow cone spray which emerges through the center axis of the nozzle body. At lower pressures, they produce medium sized, uniform droplets. Finer droplets are produced at higher pressures. TYPICAL... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 12 to 2100
- Application: Cleaning; Humidification; Aerating
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. Internal mix. Very fine atomization. Flat fan, wide angle spary patterns (between 80 ° and 90 °) [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 0.5000 to 3.4
- Application: Painting; Humidification; Misting, Odor Control, Moistening
- Maximum Pressure: 60
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern for phosphating applications. This large droplet low impingement type of spray resultes in a tighter and more consistent phosphating crystalline structure. TYPICAL APPLICATIONS: - Water Cooling. - Roof Cooling. - Air Cooling. - Metal Treatment [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 97.8 to 948
- Application: Phosphating
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. Internal mix. Very fine atomization. Narrow spray angle (12 ° to 22 °). Full cone pattern. Large forward projection - up to 28 feet (8.5 m) [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 0.4000 to 2.3
- Application: Painting; Humidification; Misting, Odor Control, Moistening
- Maximum Pressure: 60
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
from BEX Spray Nozzles
Spray Characteristics: A high capacity hollow cone spray pattern with uniform distribution. The large body orifice diameters minimize clogging. Construction: One piece cast construction. Standard material is 316 stainless steel. All the R series nozzles have a femalt NPT pipe connection. Bronze and... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 270 to 25020
- Application: Cleaning; Aeration
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. Lowest flow available. Very fine atomization. Flat fan spray pattern. Moderate spray angle (60 ° to 85 °). Moderate forward projection. Siphon-fed [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 0.1000 to 0.3000
- Application: Painting; Humidification; Misting, Odor Control, Moistening
- Maximum Pressure: 30
from Reid Supply
Friction from metal blades cutting metal causes heat. It can cause enough heat that the tool bit and waste chips can weld to the surface of the workpiece, damaging the surface. Heat can also cause the workpiece to bow slightly, throwing off precision cuts, as well as shorten the life of the cutting... [See More]
- Media: Hydraulic
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Foam Breaking. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
- Flow: 7.2 to 3300
- Pattern: Solid Cone
from BETE Fog Nozzle, Inc.
Design Features. Lowest flow available. Very fine atomization. Narrow spray angle (12 ° to 22 °). Full cone pattern. Short to moderate forward spray projection [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 0.1000 to 0.6000
- Application: Painting; Humidification; Misting, Odor Control, Moistening
- Maximum Pressure: 60
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Full cone spray pattern, with uniform distribution throughout the square cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
- Flow: 18 to 13740
- Pattern: Square
from BETE Fog Nozzle, Inc.
Design Features. Internal mix. 180 ° extra-wide hollow cone [See More]
- Media: Adhesive; Chemical; Ink; Hydraulic; Oil; Water
- Flow: 1.1 to 14.4
- Application: Painting; Humidification; Misting, Odor Control, Moistening
- Maximum Pressure: 60
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A wide angle Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
- Flow: 13.8 to 38340
- Pattern: Solid Cone
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern with larger flow rates and smaller droplet sizes. Durable, one-piece, anti-clog design has no internal vane to clog or wear out. TYPICAL APPLICATIONS: - Air & Gas Washing. - Dust Suppression. - Spray Ponds. - Cooling Tunnels. - Medical... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 29.4 to 15420
- Application: Cleaning; Humidification
- Maximum Pressure: 300
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A full cone spray pattern with larger flow rates and smaller droplet sizes. Durable, one-piece, anti-clog design has no internal vane to clog or wear out. TYPICAL APPLICATIONS: - Washing and Rinsing. - Gas Cooling. - Chemical Processing. - Cooling Sprays. - Humidification [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 29.4 to 5400
- Application: Humidification
- Maximum Pressure: 300
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A wide, flat fan-shaped spray with low impact. The spray is deflected 75 ° away from the centerline of the pipe connection, as shown. TYPICAL APPLICATIONS: Wherever a low impact, wide angle spray is required. - Rinsing and Coolin. - Dishwashing. - Fertilizer Spraying. -... [See More]
- Media: Air; Chemical; Hydraulic; Steam; Water
- Flow: 1.8 to 882
- Application: Cleaning
- Maximum Pressure: 60
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Foam Breaking. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 7.2 to 930
- Application: Continuous Casting
- Maximum Pressure: 150
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Foam Breaking. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 18 to 834
- Application: Continuous Casting
- Maximum Pressure: 150
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Full cone spray pattern, with uniform distribution throughout the cone. TYPICAL APPLICATIONS: - Chemical Processing. - Cooling Sprays. - Foam Breaking. - Continuous Casting [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 13.8 to 1044
- Application: Continuous Casting
- Maximum Pressure: 150
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern, emerging at right angles to the centerline of the pipe connection. The standard included angle of the spray cone is 70 ° at 10 p.s.i. At low pressures hollow cone nozzles produce medium size, uniform droplets. At higher pressures finer droplets... [See More]
- Media: Chemical; Hydraulic; Water
- Flow: 5.4 to 2280
- Application: Cleaning; Humidification
- Maximum Pressure: 100