Cleaning / Blowoff Nozzles
from Kuriyama of America, Inc.
Adjustable Flow Control - Twisting nozzle adjusts spray pattern from full stream to misting fog. Impact Resistant - Rubber bumpers protect nozzle from damage if dropped or dragged. Lightweight - Compact design reduces worker fatigue. Approvals and Standards - The VIPER ® VTE ™ is National... [See More]
- Application: Cleaning; Fire
- Features: Adjustable Spray
- Media: Water
from Vortec
Vortec engineered blow off nozzles significantly reduce compressed air consumption and noise, compared to open nozzle jets. Using proven amplification technology, Vortec nozzles entrain and accelerate free surrounding air, resulting in air flow volume up to 25 times more than the volume of... [See More]
- Application: Cleaning
- Technology: Hydraulic
- Media: Air
- Form: In-line; Pistol (optional feature)
from Paxton Products, an ITW company
The UNO Nozzle, by Paxton Products, provides targeted airflow for a small target. Designed to replace a single compressed air nozzle remote from a larger air delivery device, the UNO Nozzle facilitates further reduction in compressed air usage. In addition to this, the UNO Nozzle is now available in... [See More]
- Application: Cleaning
- Pattern: Stream
- Media: Air
- Form: In-line
from EXAIR
EXAIR's 1" Flat Super Air Nozzle is a highly efficient, unique flat air nozzle. Their patented (U.S. Pat 5402938) design uses a special shim to maintain the critical position of the component parts. Air is released through the thin slot, across a flat surface. The result is a wide, forceful stream... [See More]
- Application: Cleaning; Spray Drying; Cooling, Treat
- Temperature Range: 1000
- Media: Air
- Technology: AirAssist
from Kuriyama of America, Inc.
Adjustable Flow Control - Twisting nozzle adjusts spray pattern from full stream to misting fog. Impact Resistant - Rubber bumpers protect nozzle from damage if dropped or dragged. Lightweight - Compact design reduces worker fatigue. Approvals and Standards - The VIPER ® VTE ™ is National... [See More]
- Application: Cleaning; Fire
- Features: Adjustable Spray
- Media: Water
from EXAIR
EXAIRs 1" High Power Super Air Nozzles produce a flat 1" (25mm) wide airstream with a blowing force of 1 pounds. The unique design of this super-efficient nozzle makes it an ideal fit for both tight spaces and tight budgets. It uses EXAIR's patented technology to maximize entrained airflow while... [See More]
- Application: Cleaning; Spray Drying; Cooling, Treat
- Temperature Range: 1000
- Media: Air
- Technology: AirAssist
from Kuriyama of America, Inc.
Adjustable Flow Control - Twisting nozzle adjusts spray pattern from full stream to misting fog. Impact Resistant - Rubber bumpers protect nozzle from damage if dropped or dragged. Lightweight - Compact design reduces worker fatigue. Approvals and Standards - The VIPER ® VTE ™ is National... [See More]
- Application: Cleaning; Fire
- Features: Adjustable Spray
- Media: Water
from EXAIR
EXAIRs 2" High Power Super Air Nozzles produce a flat 2" (51mm) wide airstream with a strong blowing force of 2.2 pounds (1,134 grams). The adjustable force is more than three times that of ordinary air nozzles. It uses EXAIR's patented technology to maximize entrained airflow while reducing noise... [See More]
- Application: Cleaning; Spray Drying; Cooling, Treat
- Temperature Range: 1000
- Media: Air
- Technology: AirAssist
from Kuriyama of America, Inc.
Adjustable Flow Control - Twisting nozzle adjusts spray pattern from full stream to misting fog. Impact Resistant - Rubber bumpers protect nozzle from damage if dropped or dragged. Lightweight - Compact design reduces worker fatigue. Approvals and Standards - The VIPER ® VTE ™ is National... [See More]
- Application: Cleaning; Fire
- Features: Adjustable Spray
- Media: Water
from EXAIR
EXAIR's 2" (51mm) High Power Super Air Nozzle is a highly efficient, unique flat air nozzle. The patented* design uses a special shim to maintain the critical position of the component parts. A precise amount of air is released through the thin slot, across a flat surface. The result is a wide,... [See More]
- Application: Cleaning; Spray Drying; Cooling, Treat
- Temperature Range: 1000
- Media: Air
- Pattern: Solid Cone
from EXAIR
EXAIR's 2" (51mm) Super Air Nozzle is a highly efficient, unique flat air nozzle. The patented* design uses a special shim to maintain the critical position of the component parts. A precise amount of air is released through the thin slot, across a flat surface. The result is a wide, forceful stream... [See More]
- Application: Cleaning; Spray Drying; Cooling
- Pattern: Solid Cone
- Media: Air
- Technology: AirAssist
from EXAIR
EXAIR's new 2" Super Air Scraper is a unique, highly efficient, corrosion resistant steel used in conjunction with EXAIR's 2" Flat Super Air Nozzle. The patent pending design of this scraper aids in the powerful compressed air flow removal of debris. This product is perfect for removal of caulk,... [See More]
- Application: Cleaning
- Material: Steel
- Media: Air
from EXAIR
EXAIR's Adjustable Air Jets are an adjustable version of our High Velocity Air Jets. They are engineered to provide a powerful, directed airstream that is easily adjustable using the micrometer gap indicator. The focused blast of air is ideal from part ejection, chip removal, and part drying. Model... [See More]
- Application: Cleaning; Spray Drying; Cooling
- Pattern: Solid Cone
- Media: Air
- Technology: AirAssist
from EXAIR
EXAIR's Adjustable Air Nozzles are suitable for a wide variety of blowoff applications. The design allows you to "tune in" the force and flow to the application requirements, thereby minimizing air consumption. A micrometer-like dial indicates the gap setting. A set screw in the end can be tightened... [See More]
- Application: Cleaning; Spray Drying; Cooling
- Temperature Range: 1000
- Media: Air
- Pattern: Solid Cone
from EXAIR
Fluids are atomized by combining liquid and compressed air/gas at low pressures. Atomizing nozzles produce very fine droplets ideal for coating, humidifying, gas cooling, lubricating, and misting or fogging. [See More]
- Application: Cleaning
- Media: Water
from EXAIR
Model 1122 and 1122SS - EXAIR's 2" (51mm) Super Air Nozzle is a highly efficient, unique flat air nozzle. These models include Stay Set Hose [See More]
- Application: Cleaning; Spray Drying; Cooling, Treat
- Technology: AirAssist
- Media: Air
from EXAIR
EXAIR's Model 1108SS Atto Super Air Nozzle delivers the smallest, most precise blowoff with a highly focused, forceful blast of airflow. This small diameter nozzle will fit into tight spaces while packing the punch of strong blowing force. The overall length measures only 0.50" with a diameter of... [See More]
- Application: Cleaning; Spray Drying; Cooling
- Temperature Range: 1000
- Media: Air
- Pattern: Solid Cone
from EXAIR
Precise intermittent spraying solutions for coating, lubricating, conveyor spraying, moistening, and more. Uniform and repeatable spray coverage improves product quality and reduces waste and overspray. [See More]
- Application: Cleaning
- Media: Water
from EXAIR
EXAIR's Back Blow Air Nozzles are engineered to clean inside of pipe, tube, hose, or channel. An array of holes provide a forceful 360 degree air flow to clear out coolant, chips or debris created from machining processes. This nozzle prevents blowing chips further into a pipe or out the end, which... [See More]
- Application: Cleaning; ID of Pipe, Tube, Hose or Channel
- Technology: AirAssist
- Media: Air
- Form: In-line
from EXAIR
Model HP1002 and HP1002SS High Power Safety Air Nozzles - Provides strong blowing force for applications requiring the highest thrust, and velocity. These models include Stay Set Hose [See More]
- Application: Cleaning; Spray Drying; Cooling, Treat
- Technology: AirAssist
- Media: Air
from EXAIR
EXAIR's Safety Air Nozzles eject a small amount of compressed air 360 &#deg; around the outer ring that combines with the air ejected from the center hole to produce a high volume, high velocity blast of air. The slotted end allows air to vent safely should the nozzle end be blocked. EXAIR... [See More]
- Application: Cleaning; Spray Drying; Cooling
- Pattern: Solid Cone
- Media: Air
- Technology: AirAssist
from EXAIR
EXAIR's Air Jets are engineered to provide a powerful, directed airstream. The focused blast of air is ideal for part ejection, chip removal, and part drying. Force and flow can be adjusted with available shims. Both styles meet or exceed OSHA requirements. [See More]
- Application: Cleaning; Spray Drying; Cooling
- Pattern: Solid Cone
- Media: Air
- Technology: AirAssist
from EXAIR
Hollow cone nozzles produce a ring-like spray pattern with droplets formed around the outer perimeter. Ideal for cooling, gas scrubbing, and dust control. [See More]
- Application: Cleaning
- Pattern: Hollow Cone
- Media: Water
from EXAIR
EXAIR's 1/2 NPT HollowStream ™ Cone Nozzles, with a circular ring spray pattern, are among the most common type of spray nozzles. Hollow cone spray nozzles are applied to solve cooling, cleaning, washing, rinsing and dust suppression applications throughout industry with less liquid than their... [See More]
- Application: Cleaning; Cooling
- Maximum Pressure: 250
- Media: Chemical; Water
- Pattern: Hollow Cone
from EXAIR
EXAIR ’s 1/4 NPT HollowStream ™ Cone Nozzles, with a circular ring spray pattern, are among the most common type of spray nozzles. Hollow cone spray nozzles are applied to solve cooling, cleaning, washing, rinsing and dust suppression applications throughout industry with less liquid... [See More]
- Application: Cleaning; Cooling
- Maximum Pressure: 250
- Media: Chemical; Water
- Pattern: Hollow Cone
from EXAIR
EXAIR ’s 1/8 NPT HollowStream ™ Cone Nozzles, with a circular ring spray pattern, are among the most common type of spray nozzles. Hollow cone spray nozzles are applied to solve cooling, cleaning, washing, rinsing and dust suppression applications throughout industry with less liquid... [See More]
- Application: Cleaning; Painting; Cooling
- Flow: 3 to 60
- Media: Chemical; Water
- Maximum Pressure: 60
from EXAIR
This FDA-compliant, clog-resistant nozzle is ideal for Clean-In-Place systems, handles particles up to 1/4", and efficiently cleans tanks at low pressure with high flow. Designed for compact openings, the HC is offered with threaded or secure clip-on connections. Large orifices create heavy jets... [See More]
- Application: Cleaning
- Flow: 2196 to 2394
- Media: Water
- Pattern: 360° spray
from EXAIR
BETE's HWD spray nozzle is a powerful, fully submersible rotating tank cleaner designed for cleaning small to medium-sized tanks. This rotary head is fluid-driven and self-flushing for minimal maintenance. Its 360° spray pattern produces high-impact washing at 50 GPM with consistent repetition to... [See More]
- Application: Cleaning
- Flow: 3000
- Media: Water
- Pattern: 360° spray
from EXAIR
The patented † Intellistat ® Ion Air Nozzle produces ionized compressed air to neutralize static and remove troublesome particulates during clean processes, test procedures and sensitive assembly work. With a +/-30 volt balance the Intellistat was designed to use minimal compressed air... [See More]
- Application: Cleaning
- Maximum Pressure: 30 to 80
- Media: Air
- Technology: AirAssist
from EXAIR
EXAIR's award winning Super Air Nozzles are available from 3/8 NPT to 1-1/4 NPT in zinc/aluminum alloy. Type 316 stainless steel versions are also available through 1 NPT and special PEEK plastic nozzles are available in 3/8 NPT. The Large Super Air Nozzle line produces from 1.9 lbs. (850 grams) up... [See More]
- Application: Cleaning; Spray Drying; Cooling
- Temperature Range: 1000
- Media: Air
- Pattern: Solid Cone
from EXAIR
EXAIR's 1/8 FNPT, 1/4 FNPT, and 1/2 FNPT siphon fed round pattern nozzles are great where no liquid pressure is available and a thin coating is needed at a specific area. Flow rate is adjustable via the adjusting valve. Siphon nozzles work best with a suction height of 36" (914mm) or less. Since... [See More]
- Application: Cleaning; Painting; Cooling Mist
- Flow: 68.3
- Media: Ink; Water
- Pattern: Solid Cone
from Armstrong International
The 038 nozzle is suggested for washdown applications below 140 ˚F (60 ˚C). It comes with a black, heavy-duty, field-replaceable cover. The rear trigger reduces operator fatigue, and the unit conforms to the familiar spray nozzle design common in many facilities. The nozzle is also... [See More]
- Application: Cleaning; Washdown
- Flow: ? to 420
- Media: Water
- Maximum Pressure: 150
from Chemdet, Inc.
The Perfect Tank Cleaning Tool. Unique Open Design: Hygienic and Self Cleaning. Piston Driven: Low Maintenance and Service Costs. Turbine and Gear Free: Particle Tolerant. Resistant To Hydraulic Shock: No Special Startup Equipment Needed. No Lubrication Required: Contaminant Free. Versatile and... [See More]
- Application: Cleaning; Food Grade Tanks
- Flow: 2700
- Media: Chemical; Other; Aggressive Cleaning Solutions
- Temperature Range: 248
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: ABO Series air blow-off nozzles project a. flat fan-shaped curtain of gas in a direction. parallel to the axis of the nozzle body. Gases. most commonly used are air and steam. ABO. nozzles are designed with large maximum free. passage sizes to reduce clogging and minimize. the... [See More]
- Application: Cleaning; Spray Drying
- Flow: 301 to 28276
- Media: Air; Hydraulic; Steam
- Maximum Pressure: 100
from Pneumadyne, Inc.
The modular design of Pneumadyne's Air Jet system makes it adaptable to an unlimited number of applications. Originally developed for increasing the productiving of vibratory feeders, Air Jets are also used in a wide variety of cooling, lubricating and moving applications. Six configurations of the... [See More]
- Application: Cleaning
- Angle: 0 to 90
- Media: Air; Hydraulic
- Orifice Size: 62.5
from BETE Fog Nozzle, Inc.
Design Features of Tank Washing Nozzles. Each nozzle in the stationary cluster is a BETE clog-resistant full cone nozzle of the MaxiPassTM series. Can be supplied with various other BETE nozzles for any desired application. Female connection. Spray Characteristics of Tank Washing Nozzles. Spherical... [See More]
- Application: Cleaning; Tank Washing
- Flow: 442 to 1176
- Media: Chemical; Water
- Maximum Pressure: 80
from Chonghong Industries(Microwork)Ltd.
Sapphire & Ruby Nozzles are used where a longer Inner Diameter to Length ratio is desired. Sapphire nozzles & Ruby offer longer life than using metal and we can hold tighter tolerances due to sapphires & Ruby acceptance of higher surface finish. Typical Applications: Gas & Air Flow,. [See More]
- Application: Cleaning; Cutting
- Material: Sapphire and Ruby
- Media: Air; Ink; Other; Wafer Jet Cutting & Cleaning
from AIRBRASIVE
Airbrasive ® Nozzles are available with tips in a variety of shapes and sizes. The opening at the tip of the nozzle will vary according to the type of work you wish to do. It can either be round or rectangular, large or small. A rounded tip will provide the user with the greatest control when... [See More]
- Application: Cleaning
- Pattern: Stream (optional feature); Square (optional feature)
- Media: Air; Abrasive
- Form: In-line (optional feature); Right Angle (optional feature)
from Nex Flow Air Products Corp.
Superior designed Air Jets reduce compressed air consumption and noise levels while maintaining laminar flow for strong blowoff. Air Jets entrain large volumes of surrounding air through the Jet (similar to Air Amplifiers) and are more efficient than Air Nozzles. They cover a larger blowoff target... [See More]
- Application: Cleaning
- Pattern: Stream
- Media: Air
- Technology: Coanda Profile
from General Pump
Adjustable Rotating Nozzle. The ZRMAX is a high pressure, rotating, zero-degree nozzle. The unique internal design allows aim-and-spray operation, even when cleaning overhead, and permits easy replacement of all wear parts. Sized according to flow rate, a ZRMAX is perfect for your toughest cleaning... [See More]
- Application: Cleaning
- Flow: 396
- Media: Water
- Maximum Pressure: 5800
from Swiss Jewel Company
Sapphire Nozzles are used where a longer Inner Diameter to Length ratio is desired. Using sapphire nozzles will provide longer life than using metal and we can hold tighter tolerances due to sapphires acceptance of higher surface finish. Typical Sapphire Nozzle Applications: Gas & Air Flow,... [See More]
- Application: Cleaning; Cutting; Ink Jet
- Pattern: Stream
- Media: Air; Ink; Water
- Orifice Size: 9.5 to 30
from Lechler, Inc.
The ACCUClean Tank Cleaning nozzle is a gear-driven unit but sized with our existing free spinning products. The key features are: * Operates effectively at pressures from 20 to 150 psi * Slow rotation reduces atomization for higher washing impact * Contains a positive gear drive mechanism to... [See More]
- Application: Cleaning
- Flow: 1260 to 5820
- Media: Other; Liquid
- Maximum Pressure: 20 to 75
from Suttner America Company
Applies a variation of chemical with metering action. Similar to ST-60, but with adjustable hose barb. [See More]
- Application: Cleaning
- Maximum Pressure: 3000
- Media: Chemical; Water
- Inlet: 3/8" FNPT
from Cat Pumps - High Pressure Pumps & Systems
The ultra-high pressure Dual-Strike nozzle from Cat Pumps allows users to select between a straight stream and high expansion fog stream with the flick of a wrist. Ultra-high pressure spray breaks down water droplets by up to 64 times, reducing surface area for faster and more efficient fire... [See More]
- Application: Cleaning; Fire
- Flow: 210
- Media: Water
- Maximum Pressure: 1500
from Armstrong International
Model 038TG (Trigger Guard) has been designed to address several high temperature washdown issues and concerns. Ergonomics. Ergonomically designed trigger guard and handgrip with front mounted spray activation trigger reduces hand fatigue. Heat. The 038TG nozzle is rated to 200 °F (93 °C). [See More]
- Application: Cleaning; Washdown
- Flow: ? to 420
- Media: Water
- Maximum Pressure: 150
from Chemdet, Inc.
The Perfect Low-Volume Rotating Spray Ball. No Ball Bearings: Reduced Contamination. Minimal Moving Parts: Lower Maintenance Costs. Controlled Rotation Speed: Consistent Cleaning Pattern. Powerful Jets: Reduced Cleaning Time. Applications. The Rotaball tank washer is a compact, rotating-ball... [See More]
- Application: Cleaning; Open Top and Special Tank Washer Applications
- Flow: 2880
- Media: Chemical
- Maximum Pressure: 75
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: BEX Airwisk nozzles produce a concentrated flat fan pattern of high impact air for cooling, drying and blow off applications. The Airwisk ’s design efficiently controls compressed air usage, reduces energy costs and provides optimum air distribution. CONSTRUCTION: The... [See More]
- Application: Cleaning; Cooling, Cleaning, Air Curtains, Debris Removal
- Maximum Pressure: 10 to 90
- Media: Air
- Pattern: Fan
from BETE Fog Nozzle, Inc.
Design Features. One-piece construction. Clog-resistant. Durable. 3/8" FFs in Brass are available with UL approval; 3/8" FF187145 in Brass is available with FM approval. Male connection. Spray Characteristics. Extra-wide 145 ° spray angle. Medium-impact spray. Spray discharge deflected 75 °... [See More]
- Application: Cleaning; Fire; Electronic Etching, Food Processing
- Flow: 0.8400 to 6.72
- Media: Air; Chemical; Hydraulic; Steam; Water
- Maximum Pressure: 200
from Nex Flow Air Products Corp.
The Air Edger ™ Flat Jet Air Nozzle, provides a powerful force while reducing compressed air use for a variety of blow off applications. The unit is 2" wide and the gap is maintained by a shim. Changing or stacking various shim sizes allows you to set the force that you need for any particular... [See More]
- Application: Cleaning
- Pattern: Fan
- Media: Air
- Inlet: 1/4" Female
from General Pump
Adjustable Spray High/low Pressure Nozzle, 0.86 - 1.8 mm. FEATURES. Variable angle. spray - 15 ° average angle. High and low pressure settings allow for both cleaning and chemical application. Durable, cost-effective design. Higher-impact design offers superior cleaning. Performance. General... [See More]
- Application: Cleaning
- Flow: 630
- Media: Chemical; Water
- Maximum Pressure: 3200
from Lechler, Inc.
This flat fan ball nozzle swivels in any direction for precise adjustment of the spray direction. Optional accessories include a retaining nut into which the ball-type nozzle fits; and either a 3/8" socket or a welding nipple which connects to the inlet source and to which the retaining nut with the... [See More]
- Application: Cleaning; Cooling, Lubrication
- Flow: 0.7200 to 3
- Media: Oil; Water
- Maximum Pressure: 10 to 150
from Suttner America Company
For use when different spray patterns from 0 degree solid stream to 80 degree flat spray are needed. [See More]
- Application: Cleaning
- Maximum Pressure: 3000
- Media: Water
- Inlet: 1/4"
from Cat Pumps - High Pressure Pumps & Systems
A high-pressure Lance is attached to a standard gun handle to provide a safe working distance between operator and spray surface. Nozzles are attached to the opposite end of lances and are sized to provide a certain pressure depending on the flow. Nozzle sizes are viewed as nozzle numbers and are... [See More]
- Application: Cleaning
- Flow: 114 to 180
- Media: Water
- Maximum Pressure: 1200 to 3000
from Chemdet, Inc.
The Perfect Low Flow, Low Speed, Slotted Spray Ball. Slow Constant Rotation: Improved Cleaning Action. No Ball Bearings: Lower Maintenance and Longer Life. Low Flow: Reduced Water, Chemical and Effluent Costs. High Efficiency Fan Jets: Reduced Cleaning Time. Versatile and Unique. The Turbo SSB tank... [See More]
- Application: Cleaning; C.I.P Tank Cleaning, Food, Dairy Beverage, Cosmetic, Pharmaceutical and Food Applications
- Flow: 3816
- Media: Chemical; Other; Cleaning Fluids
- Maximum Pressure: 60
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: Spray is fan-shaped with spray angles of 15 ° to 110 °. Spray density tapers off toward the outside to permit overlapping of the spray patterns while maintaining uniform spray density. TYPICAL APPLICATIONS: - Cleaning and Washing Applications [See More]
- Application: Cleaning; Pretreatment
- Flow: 42.6 to 1008
- Media: Chemical; Water
- Maximum Pressure: 50
from BETE Fog Nozzle, Inc.
Design Features. Controlled wide uniform distribution and high impact coverage of compressed air. Can be mounted individually or side-by-side for greater coverage. Efficient air flow rates with unique eductor feature. Safe operation —meets OSHA specifications for noise and deadhead pressure. [See More]
- Application: Cleaning; Air Drying
- Maximum Pressure: 100
- Media: Air
- Temperature Range: ? to 300
from Nex Flow Air Products Corp.
The Air Edger ™ Flat Jet Air Nozzle, provides a powerful force while reducing compressed air use for a variety of blow off applications. The unit is 2" wide and the gap is maintained by a shim. Changing or stacking various shim sizes allows you to set the force that you need for any particular... [See More]
- Application: Cleaning
- Pattern: Fan
- Media: Air
- Inlet: 1/4" Female
from General Pump
Adjustable Nozzle, Premium High/low pressure Setting and Variable Spray Angle, 5.5 GPM. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure... [See More]
- Application: Cleaning
- Flow: 330
- Media: Water
- Maximum Pressure: 3000
from Lechler, Inc.
Lechler axial full cone nozzles offer superior distribution of liquid throughout the entire circular impact area. This uniform distribution is achieved through the use of an x-style vane whose design is optimized to assure a consistent spray angle at any given liquid capacity. The large free... [See More]
- Application: Cleaning; Painting; Spray Drying; Dust Suppression, Cooling
- Flow: 780 to 2100
- Media: Chemical; Water
- Maximum Pressure: 5 to 60
from Suttner America Company
Popular car wash choice and hard to reach applications. [See More]
- Application: Cleaning
- Maximum Pressure: 2250
- Media: Water
- Inlet: 1/4" M
from Chemdet, Inc.
The extended range and outstanding durability of the Thick-Wall SPRAY BALL is made possible by its unique 1/4" (6 MM) wall thickness. EXTENDED RANGE: Each hole drilled through the thick-wall is virtually a nozzle tube, resulting in the jet streams traveling much farther than normal before breaking... [See More]
- Application: Cleaning; Large Vessels
- Flow: 6000
- Media: Chemical; Other
- Maximum Pressure: 15
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: DF-Series thin-disc flat spray nozzles are used where the nozzle must not project beyond the wall of the headder pipe. Minimum recommended pipe size is 1" schedule 80. Optimum thred engagement occurs on pipe 1-1/4" schedule 80 and larger. Usual operating pressures are up to... [See More]
- Application: Cleaning
- Flow: 16.2 to 462
- Media: Water
- Maximum Pressure: 150
from BETE Fog Nozzle, Inc.
Design Features. Each nozle in the stationary cluster is a BETE clog-resistant spiral nozzle of the TF series. Can be supplied with various other BETE nozzles for any desired application. Female connection. Spray Characteristics. Spherical omnidirectional coverage. Six nozzles arranged in cluster to... [See More]
- Application: Cleaning; Tank Washing
- Flow: 252 to 798
- Media: Chemical; Water
- Maximum Pressure: 100
from Nex Flow Air Products Corp.
The Air Edger ™ Flat Jet Air Nozzle, provides a powerful force while reducing compressed air use for a variety of blow off applications. The unit is 2" wide and the gap is maintained by a shim. Changing or stacking various shim sizes allows you to set the force that you need for any particular... [See More]
- Application: Cleaning
- Pattern: Fan
- Media: Air
- Inlet: 1/4" Female
from General Pump
Adjustable Nozzle, Variable Spray Angle and High/low Pressure Setting. FEATURES. Variable angle. spray - 15 ° average angle. High and low pressure settings allow for both cleaning and chemical application. Durable, cost-effective design. Higher-impact design offers superior cleaning. [See More]
- Application: Cleaning
- Flow: 630
- Media: Chemical; Water
- Maximum Pressure: 4050
from Lechler, Inc.
For mounting using Twist Loc or cap-base-tip configurations, the Lechler full cone tip version offers all the same advantages of the 460 series product line. Each tip uses the same vane and internal geometry as its equivalent threaded version, so performance is equal in flow, coverage and... [See More]
- Application: Cleaning; Spray Drying
- Flow: 6.6 to 19.2
- Media: Chemical; Water
- Maximum Pressure: 10 to 150
from Suttner America Company
For use when high and low pressures are needed and switching between a solid or a flat spray pattern without changing nozzle. Low pressure mode great for introduction of downstream chemicals. [See More]
- Application: Cleaning
- Maximum Pressure: 3200
- Media: Water
- Temperature Range: 300
from Chemdet, Inc.
The TURBODISC 75/360 Drum & Barrel Washer is a scientifically designed, self-operating device that provides an aggressive dense spray to thoroughly clean the interior surfaces of drums, barrels, small tanks and containers. Quality. Made of high grade stainless steel, it can be used with a... [See More]
- Application: Cleaning; Food & Beverage, Vats, Barrels, Containers, Tanks
- Temperature Range: 248
- Media: Chemical; Other; Detergents
- Angle: 360
from BEX Spray Nozzles
EDUCTOR PRINCIPLES: BEX eductors use a unique venturi design which enables smaller pumps to circulate large volumes of tank solution. The eductor will circulate four to five gallons of solution for each gallon pumped. BEX eductors are used for mixing chemicals, suspending solids, adjusting pH,... [See More]
- Application: Cleaning; Painting; Decorative Fountains
- Flow: 192 to 4440
- Media: Chemical; Water
- Maximum Pressure: 50
from BETE Fog Nozzle, Inc.
Design Features. Provides effective cleaning with low water consumption. Interchangeable family of shower nozzles. Self-aligning. Orifice designed for efficient cleaning. Spray Characteristics. Spray patterns: Straight Jet and Flat Fan. Other patterns available with BETE EZ-Change system. Spray... [See More]
- Application: Cleaning
- Flow: 2.46 to 8.4
- Media: Chemical; Water
- Maximum Pressure: 500
from Nex Flow Air Products Corp.
The Air Edger ™ Flat Jet Air Nozzle, provides a powerful force while reducing compressed air use for a variety of blow off applications. The unit is 2" wide and the gap is maintained by a shim. Changing or stacking various shim sizes allows you to set the force that you need for any particular... [See More]
- Application: Cleaning
- Pattern: Fan
- Media: Air
- Inlet: 1/4" Female
from General Pump
Adjustable Rotating Nozzle. The Rotomax is designed to improve the cleaning efficiency of your high pressure washer by producing a rotating action that greatly expands the contact area of the cleaning stream, while providing that impact of a zero-degree nozzle. The unique internal design allows... [See More]
- Application: Cleaning
- Flow: 328
- Media: Water
- Maximum Pressure: 3500
from Lechler, Inc.
Lechler's axial hollow cone nozzles incorporate a two-piece body and swirl insert design. Spiral grooves conduct liquid along a straight-through (axial) flow line, producing an especially fine atomized spray. Swirl insert is removable for easy cleaning. [See More]
- Application: Cleaning; Humidification; Spray Drying; Cooling, Desuperheating
- Flow: 0.1800 to 0.4200
- Media: Oil
- Maximum Pressure: 75 to 300
from Suttner America Company
For use when high and low pressures are needed and switching between a solid or a flat spray pattern. Low pressure mode great for introduction of downsteam chemicals. [See More]
- Application: Cleaning
- Maximum Pressure: 3000
- Media: Chemical; Water
- Temperature Range: 300
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: F-Series spray nozzles produce a flat, fan-shaped spray pattern, with spray angles available from 0 ° solid stream to 110 ° fans measured at 40 psi. Spray angles generally increase with pressure. TYPICAL APPLICATIONS: Suitable for a variety of washing and spraying... [See More]
- Application: Cleaning
- Flow: 6.6 to 822
- Media: Chemical; Water
- Maximum Pressure: 300
from BETE Fog Nozzle, Inc.
Design Features of MaxiPass full cone nozzle. Ultimate clog-resistant design with largest free passage available in a full cone nozzle. Two unique S-shaped internal vanes allow free passage of particles. High energy efficiency. Easily handles dirty, lumpy liquids. Male and female connections. [See More]
- Application: Cleaning; Fire; Distribution, Packing
- Flow: 42 to 196
- Media: Chemical; Water; Other; Easily Handles Dirty, Lumpy Liquids
- Maximum Pressure: 80
from Nex Flow Air Products Corp.
Available in cast zinc, ¼ in. NPT or BSP Nex Flow ™ Air Mag ™ 47004AMF serves applications requiring high force for blow off. Star-type profile design utilizes various size air outlet holes using smaller holes at inward angle. Resulting concentration of higher flowing air into... [See More]
- Application: Cleaning
- Pattern: Stream
- Media: Air
- Inlet: 1/4" NPT or BSP
from General Pump
Double Nozzle Holders. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application Flexibility. General Pump High Pressure... [See More]
- Application: Cleaning
- Flow: 330 to 630
- Media: Water
- Maximum Pressure: 3000
from Lechler, Inc.
Due to their lack of surface tension, air and steam cannot be formed into a pattern by standard liquid spray nozzles. Lechler air/steam nozzles are specially designed for use with air or steam to produce a uniform flat fan pattern.The 3-piece nozzle design enables the user to interchange nozzle tips... [See More]
- Application: Cleaning; Strip & Web Drying, Blow-off
- Flow: 404 to 2110
- Media: Air; Steam
- Maximum Pressure: 10 to 100
from Suttner America Company
For applications requiring quick exchange of different degree nozzles. To help choose the correct quick nozzle degree and orifice size, click the link above, "For help choosing the correct nozzle." [See More]
- Application: Cleaning
- Maximum Pressure: 4000
- Media: Water
- Temperature Range: 300
from BEX Spray Nozzles
Spray Characteristics: BEX F series spray nozzles produce a flat spray pattern with spray angles of 0 degrees to 110 degrees at 40 psi. Construction: Each BEX molded nozzle is designed with a series of "knobs" which makes them easier to finger tighten than a hex, especially when wet. The design... [See More]
- Application: Cleaning; Painting; AntiStatic
- Flow: 6 to 420
- Media: Adhesive; Chemical; Water
- Maximum Pressure: 40
from BETE Fog Nozzle, Inc.
Design Features. High flow rates with coarse atomization. Reliable, uniform coverage. Manufactured in chemical-resistant plastics and some bar stock metal alloy materials. Lightweight and rugged. Made in the USA. Can be customized to a particular flowrate and angle. Male and female connections. Wide... [See More]
- Application: Cleaning; Distribution, Packing
- Flow: 121 to 630
- Media: Chemical; Water
- Maximum Pressure: 100
from General Pump
Sewer Jet Nozzle, #3. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application Flexibility. General Pump High Pressure... [See More]
- Application: Cleaning; Drain Cleaning
- Flow: 201
- Media: Water
- Maximum Pressure: 5000
from Lechler, Inc.
Deflector nozzles are most typically used for spraying liquid. However, their design allows them to also be a good candidate for spraying compressed air or saturated steam. A solid stream of air is directed through the nozzle orifice where it strikes the deflector plate, which redirects the air off... [See More]
- Application: Cleaning; Blow-off, Cooling, Drying
- Flow: 404 to 763
- Media: Air
- Maximum Pressure: 10 to 100
from Suttner America Company
Suitable when using corrosive chemical. Our most popular lances for cold or hot water applications. [See More]
- Application: Cleaning
- Maximum Pressure: 5800
- Media: Chemical; Water
- Temperature Range: 300
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A wide, flat fan-shaped spray with low impact. The spray is deflected 75 ° away from the centerline of the pipe connection, as shown. TYPICAL APPLICATIONS: Wherever a low impact, wide angle spray is required. - Rinsing and Cooling. - Dishwashing. - Fertilizer Spraying. -... [See More]
- Application: Cleaning
- Flow: 1.8 to 396
- Media: Hydraulic; Water
- Maximum Pressure: 60
from BETE Fog Nozzle, Inc.
Design Features. Large internal passages. Uniform spray coverage. High flow rates with coarse atomization. Variety of polymer materials available, offering a high corrosion resistance. For metal alloy nozzles, refer to SC or TC series. Spray Characteristics Spray pattern: Full Cone. Spray angles: 60... [See More]
- Application: Cleaning; Distribution, Packing
- Flow: 5640 to 13740
- Media: Chemical; Water
- Maximum Pressure: 20
from General Pump
Drain cleaning nozzle, Microdrain, Stainless Steel or Brass. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application... [See More]
- Application: Cleaning; Drain Cleaning
- Flow: 138 to 342
- Media: Water
- Maximum Pressure: 1750 to 3650
from Lechler, Inc.
Deflector nozzles feature a precision machined deflector surface that produces a wide, flat spray pattern with uniform distribution and medium impact. The one-piece design resists clogging due to a large, unobstructed flow passage and round orifice. The spray droplets are in the medium size... [See More]
- Application: Cleaning; Foam Control, Dust Suppression
- Flow: 4.8 to 15
- Media: Water
- Maximum Pressure: 10 to 100
from Suttner America Company
Suitable when using corrosive chemical. Our most popular lances for cold or hot water applications. [See More]
- Application: Cleaning
- Maximum Pressure: 5800
- Media: Chemical; Water
- Temperature Range: 300
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A flat and thin fan-shaped spray with sharp definition on all edges. This spray delivers very high impact over the area covered. The spray is deflected by angle D away from the centerline of the spray nozzle. TYPICAL APPLICATIONS: - High Impact Applications. - Metal Wash. -... [See More]
- Application: Cleaning
- Flow: 3.6 to 3480
- Media: Water
- Maximum Pressure: 150
from BETE Fog Nozzle, Inc.
Design Features. One-piece construction. No internal parts. Sizes for all applications. Male connection. Spray Characteristics. High impact. Uniform distribution with tapered edges for overlapping sprays. Extra-wide angles available. Spray pattern: Fan and Straight Jet. Spray angles: 0 ° to 120... [See More]
- Application: Cleaning; Painting; Lubrication
- Flow: 1.8 to 19.2
- Media: Air; Chemical; Ink; Hydraulic; Water
- Maximum Pressure: 400
from General Pump
Drain Cleaning Nozzle, Microdrain, #5.5 or #8.5 Equivalent Orifice Diameter. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. [See More]
- Application: Cleaning; Drain Cleaning
- Flow: 276 to 438
- Media: Water
- Maximum Pressure: 3000
from Lechler, Inc.
This one-piece nozzle assembly is designed to easily connect to any plastic Lechler TWISTLOC base. The TWISTLOC assembly is a quick disconnect system which allows a fast and easy connection of nozzles without tools. Just apply the nozzle to the base, give a quick turn, and the nozzle is connected. [See More]
- Application: Cleaning; Foam Control, Dust Suppression
- Flow: 6 to 18.6
- Media: Water
- Maximum Pressure: 10 to 100
from Suttner America Company
For use when extreme high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure, or switching to chemicals during high pressure cleaning. [See More]
- Application: Cleaning
- Maximum Pressure: 7300
- Media: Chemical
- Temperature Range: 300
from BEX Spray Nozzles
Spray Characteristics: Full cone spray pattern, with uniform distribution throughout the cone. Construction: All models have female NPT connection, and consist of a one piece body plus an internal insert. Standard materials are machined 316 stainless steel or cast 316 stainless steel. Typical... [See More]
- Application: Cleaning
- Flow: 234 to 58080
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 150
from BETE Fog Nozzle, Inc.
Design Features. Dovetail joint guarantees alignment of interchangeable tips. Dimensionally compatible with standard dovetail systems. Tips offset 5 ° or 15 ° for overlapping spray patterns. Tapered overlapping spray provides uniform coverage. Male, female and welded connections. Other sizes... [See More]
- Application: Cleaning; Painting; Lubrication
- Flow: 2.94 to 18.6
- Media: Air; Chemical; Ink; Hydraulic; Steam; Water
- Maximum Pressure: 400
from General Pump
Tank cleaning nozzle, M63 Electric for small openings, 24V. FEATURES. Designed for quick and efficient cleaning of interior surfaces on tanks and barrels. Small spray turret fits through most barrel and tank access ports. Complete orbital coverage of all interior surfaces. Rotating speed independent... [See More]
- Application: Cleaning
- Flow: 240 to 1260
- Media: Water
- Maximum Pressure: 2000
from Lechler, Inc.
These dovetail flat fan nozzles offer the same spray performance as the 632 and 652 series of spray nozzles but provide the self-positioning feature of our larger descaling nozzles.When the dovetail slots onthe bases are aligned with the header axis, the spray pattern is automatically offset by 5... [See More]
- Application: Cleaning; Cooling Headers, Spray Pipes
- Flow: 59.4 to 186
- Media: Other; Liquids
- Maximum Pressure: 10 to 100
from Suttner America Company
The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment. Always start turbo nozzles in down position. [See More]
- Application: Cleaning
- Maximum Pressure: 3600
- Media: Water
- Temperature Range: 190
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern, emerging at right angles to the centerline of the pipe connection. The standard included angle of the spray cone is 70 ° at 10 p.s.i. At low pressures hollow cone nozzles produce medium size, uniform droplets. At higher pressures finer droplets... [See More]
- Application: Cleaning; Humidification
- Flow: 5.4 to 2280
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. Extremely short length for minimum projection and maximum clearance. Produces a flat fan spray pattern available in a variety of spray angles. Available in straight (parallel) threads only, NPS and BSPP. Requires gasket to seal connection. Spray Characteristics. Spray pattern: Fan. [See More]
- Application: Cleaning; Painting; Lubrication
- Flow: 2.4 to 16.8
- Media: Air; Chemical; Ink; Hydraulic; Steam; Water
- Maximum Pressure: 200
from General Pump
Spray Nozzle, 1/4 ″ Female. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application Flexibility. General Pump High... [See More]
- Application: Cleaning
- Inlet: 1/4" Female
- Media: Water
- Technology: Hydraulic
from Lechler, Inc.
Lechler flat fan dovetail nozzles are the ultimate choice for fast, precise header set-up and easy maintenance. These nozzles offer the same spray qualities of the roto fan nozzles, plus the advantages of nozzle self-alignment: Spray performance is unaltered by nozzle replacement or maintenance.In... [See More]
- Application: Cleaning; Cooling Headers, Spray Pipes
- Flow: 1.2 to 186
- Media: Other; Liquids
- Maximum Pressure: 10 to 100
from Suttner America Company
The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment. Always start turbo nozzles in down position. [See More]
- Application: Cleaning
- Maximum Pressure: 5000
- Media: Water
- Temperature Range: 212
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: The HNS series vaneless full-cone nozzle projects a medium to coarse full-cone spray in a direction perpendicular to the nozzle inlet axis. The maximum free passage in this nozzle is substantialy larger than most full-cone nozzles due to the "vaneless" design. this nozzle is... [See More]
- Application: Cleaning
- Flow: 21 to 1500
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 125
from BETE Fog Nozzle, Inc.
Design Features. Small physical size. Small orifice size: 0.014" through 0.125" (0.035mm through 3.18mm). Interchangeable with most other needle-type showers. Spray Characteristics. Hard-driving straight jet. Spray angles: 0 °. Flow rates: 0.028 to 8.21 gpm (0.075 to 34.1 L/min) [See More]
- Application: Cleaning; Degreasing, Paper Cutting
- Flow: 1.68 to 7.8
- Media: Chemical; Water
- Maximum Pressure: 800
from General Pump
Soap Shooting Nozzle, Includes 30 ft. Hose, Filter and SS Nozzle. Features. For use with lance or extension wand. Adjustable chemical feature. Chemical can be stopped. 5000 PSI maximum. Chemical does not go through pump. Attaches to QC on lance or extension wand. Stainless steel. Includes: 30 ft... [See More]
- Application: Cleaning
- Maximum Pressure: 5000
- Media: Chemical; Other; Soap
- Orifice Size: 48 to 67
from Lechler, Inc.
Where quick installation and convenience are required, it's hard to beat the Easy Clip plastic nozzle.To install just drill a hole in the pipe and latch the nozzle in place with a positive locking stainless steel spring clip. All it takes is a 21/32" hole. No half couplings, weldments or threaded... [See More]
- Application: Cleaning; Phosphating Lines, Degreasing
- Flow: 30 to 54
- Media: Water
- Maximum Pressure: 10 to 30
from Suttner America Company
Slides easily into drain pipes and sewer lines flushing debris or clearing frozen pipes while attached to sewer hose. [See More]
- Application: Cleaning
- Maximum Pressure: 4200
- Media: Water
- Orifice Size: 4.5
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern, similar to the BEX H series, but with a wider spray angles. The included angle of the spray cone is 120 ° at 10 p.s.i. TYPICAL APPLICATIONS: - Water Cooling. - Roof Cooling. - Air Cooling. - Air Washing [See More]
- Application: Cleaning
- Flow: 7.2 to 1680
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 125
from BETE Fog Nozzle, Inc.
Design Features of Rotating Tank Washing Nozzles and Drum Washing Nozzles. Fits through a 1.77" (45mm) opening. Low leakage, resulting in water and chemical savings, and reduction in treatment costs. Hardened 400 series Stainless Steel bearinga. Spray Characteristics of Rotating Tank Washing Nozzles... [See More]
- Application: Cleaning; Tank Washing
- Flow: 300 to 732
- Media: Chemical; Water
- Maximum Pressure: 60
from General Pump
Adjustable Nozzle, Premium High/low pressure Setting and Variable Spray Angle. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning... [See More]
- Application: Cleaning
- Flow: 327
- Media: Water
- Maximum Pressure: 2800
from Lechler, Inc.
For larger vessels in the 10-20' diameter range, Lechler's Gyro tank cleaning series sets the pace. Gyros are free spinning, optimally operating at between 30 and 60 psi inlet pressure. The three sizes (1", 2", and 3") and five coverage angles (180º up and down, 270º up and down, and 360º) offer the... [See More]
- Application: Cleaning
- Flow: 2100 to 3660
- Media: Other; Liquid
- Maximum Pressure: 20 to 65
from Suttner America Company
Slides easily into drain pipes and sewer lines flushing debris or clearing frozen pipes while attached to sewer hose. [See More]
- Application: Cleaning
- Maximum Pressure: 4000
- Media: Water
- Orifice Size: 5.5
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: ILH series in-line hollow cone spray nozzles produce a very evenly distributed hollow cone spray which emerges through the center axis of the nozzle body. At lower pressures, they produce medium sized, uniform droplets. Finer droplets are produced at higher pressures. TYPICAL... [See More]
- Application: Cleaning; Humidification; Aerating
- Flow: 12 to 2100
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features of Rotating Tank Washing Nozzle. Compact design fits through small openings. O.D.: SM50 - 1.93" (49mm), SM75 - 2.83" (72mm), SM30 - 1.38" (35mm). Superior cleaning at low pressures and low flow rates for greater economy. Self-cleaning. Sanitary design. Patented mist-reducing head. No... [See More]
- Application: Cleaning; Tank Washing
- Flow: 1380 to 2340
- Media: Chemical; Water
- Maximum Pressure: 60
from General Pump
Hydro-Excavating Nozzles. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application Flexibility. General Pump High Pressure... [See More]
- Application: Cleaning
- Flow: 1800
- Media: Water
- Maximum Pressure: 4000
from Lechler, Inc.
Lechler's high pressure flat fan nozzle is especially designed for applications requiring liquid pressures up to 4500 psi. Each nozzle is a two-piece assembly and provides a sharp, uniform flat fan spray pattern. The base is made from 303 grade stainless steel and the orifice is made from hardened... [See More]
- Application: Cleaning; Steam Jet Cleaner
- Flow: 126 to 1860
- Media: Steam; Water
- Maximum Pressure: 4500
from Suttner America Company
For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure. [See More]
- Application: Cleaning
- Maximum Pressure: 3600
- Media: Chemical; Water
- Temperature Range: 300
from BEX Spray Nozzles
Spray Characteristics: A full cone spray pattern with large flow capacities. Spray angle is 90 degrees (included angle). Other sizes and spray angles available upon request. Construction: The models are machined from plastic and consist of a body plus a non-removable insert. Standard materials are... [See More]
- Application: Cleaning
- Flow: 558 to 26580
- Media: Water
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. Nozzles can be quickly changed and aligned by hand without tools. Clamp-on adaptor fits any style nozzle. Quick set-up system features special "Snap-in" tips. Polypropylene, resistant to most acids and alkalies. Double clamp base or adapter available for higher pressure operation. [See More]
- Application: Cleaning; Painting; Metal Finishing
- Flow: 21 to 94.8
- Media: Chemical; Water
- Maximum Pressure: 100
from General Pump
Industrial Rotating Nozzle. Features. Professional, industrial high pressure rotating nozzles. Stainless steel components. Nozzles and seats are made of tungsten carbide. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides... [See More]
- Application: Cleaning
- Flow: 803
- Media: Water
- Maximum Pressure: 11000
from Lechler, Inc.
Lechler's high pressure solid stream nozzle is especially designed for applications requiring liquid pressures up to 4500 psi. Each nozzle is a two-piece assembly and provides a sharp, uniform flat fan spray pattern. The base is made from 303 grade stainless steel and the orifice is made from... [See More]
- Application: Cleaning; Cutting
- Flow: 66 to 198
- Media: Water
- Maximum Pressure: 1000 to 9000
from Suttner America Company
For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure. [See More]
- Application: Cleaning
- Maximum Pressure: 4000
- Media: Chemical
- Temperature Range: 300
from BEX Spray Nozzles
Spray Characteristics: A full square spray pattern with large flow capacities. Spray angle is 90 degrees (included angle). Other sizes and spray angles available upon request. Construction: The models are machined from plastic and consist of a body plus a non-removable insert. Standard materials are... [See More]
- Application: Cleaning
- Flow: 558 to 26580
- Media: Water
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. One-piece/heavy construction. Straigh-through orifice minimizes clogging. Machined from bar stock to exacting standards. Male connection. Spray Characteristics. Yields highest impact, narrow flat spray with least atomization. Spoon-shaped deflector surface efficiently forms a... [See More]
- Application: Cleaning
- Flow: 30 to 132
- Media: Air; Chemical; Steam; Water
- Maximum Pressure: 200
from General Pump
Industrial Rotating Nozzle - Titanium Seat. Features. Professional, industrial high pressure rotating nozzles. Stainless steel components. Nozzles and seats are made of titanium. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and... [See More]
- Application: Cleaning
- Flow: 673
- Media: Water
- Maximum Pressure: 22000
from Lechler, Inc.
Impactor spray nozzles feature a powerful, narrow, flat spray with sharply defined edges. The uniform, high impact spray pattern is produced from the precision machined deflector surface. The one piece design features a round, straight-through orifice which minimizes clogging. [See More]
- Application: Cleaning; Phosphating Lines
- Flow: 72 to 234
- Media: Water
- Maximum Pressure: 10 to 100
from Suttner America Company
Increase the cleaning power of your Dual Lance by 200% with the addition of the Turbo Nozzle. Lance can be ordered with any size ST-357 Turbo Nozzle. [See More]
- Application: Cleaning
- Maximum Pressure: 3600
- Media: Chemical
- Temperature Range: 300
from BEX Spray Nozzles
Spray Characteristics: A full cone spray pattern with large flow capacities. Spray angle is 120 degrees (included angle). Other sizes and spray angles available upon request. Construction: The models are machined from plastic and consist of a body plus a non-removable insert. Standard materials are... [See More]
- Application: Cleaning
- Flow: 558 to 26580
- Media: Water
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. Large free passage. Clog-resistant; nozzles have no internal parts. Wide spray band. Female connection. Flanged connection available. U.S. Patent 4,231,524. Inlet and outlet are in-line. Silicon Carbide requests require review prior to quote/order acceptance - restrictions may... [See More]
- Application: Cleaning; Scrubbing
- Flow: 247 to 900
- Media: Chemical; Water; Other; Slurry
- Maximum Pressure: 40
from General Pump
Spray Nozzle, 1/4 ″ NPT-Male. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application Flexibility. General Pump... [See More]
- Application: Cleaning
- Inlet: 1/4" NPT-Male
- Media: Water
- Technology: Hydraulic
from Lechler, Inc.
Lechler Injector nozzles produce a narrow, full cone pattern with higher impact as compared to wider-angle full cone nozzles rated at the same flow capacity. Available with either a 15 ° or 30 ° spray angle. Injector nozzles produce large droplets with uniform distribution. [See More]
- Application: Cleaning; Liquid Injection,
- Pattern: Solid Cone
- Media: Water; Other; Liquids
- Inlet: 1/4" to 3/8" NPT
from Suttner America Company
The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment. Always start turbo nozzles in down position. [See More]
- Application: Cleaning
- Maximum Pressure: 7300
- Media: Water
- Temperature Range: 194
from BEX Spray Nozzles
Spray Characteristics: A full square spray pattern with large flow capacities. Spray angle is 120 degrees (included angle). Other sizes and spray angles available upon request. Construction: The models are machined from plastic and consist of a body plus a non-removable insert. Standard materials... [See More]
- Application: Cleaning
- Flow: 558 to 26580
- Media: Water
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features of Tank Washing Nozzles, Clog-Resistant Nozzles. Clog-resistant spiral design. Energy efficient; uses less water than conventional designs. Compact design; fits small openings. Spray Characteristics of Tank Washing Nozzles, Clog-Resistant Nozzles. Easy to maintain. Unique patterns... [See More]
- Application: Cleaning; Clean In Place, Tank Washing
- Flow: 180 to 1140
- Media: Chemical; Water
- Maximum Pressure: 400
from General Pump
Pneumatic Tank Cleaning Assembly. FEATURES. Designed for quick and efficient cleaning of interior surfaces on tanks and barrels. Small spray turret fits through most barrel and tank access ports. Complete orbital coverage of all interior surfaces. Rotating speed independent from supply water... [See More]
- Application: Cleaning
- Flow: 1260
- Media: Water
- Maximum Pressure: 2000
from Lechler, Inc.
For the largest tanks (up to 50' in diameter) and the most difficult cleaning applications, Lechler offers the M20, a 360° gear-driven high impact tank cleaning machine with quality and reliability built into every model. The M20: * Does not require high feed pressures. * Has no external power... [See More]
- Application: Cleaning
- Flow: 2400 to 3540
- Media: Other; Liquid
- Maximum Pressure: 40 to 150
from Suttner America Company
Switch between two nozzles without stopping. Great for applying soap and then cleaning with high pressure. Popular at tunnel car washes. [See More]
- Application: Cleaning
- Maximum Pressure: 3600
- Media: Water
- Temperature Range: 300
from BEX Spray Nozzles
Spray Characteristics: A high capacity hollow cone spray pattern with uniform distribution. The large body orifice diameters minimize clogging. Construction: One piece cast construction. Standard material is 316 stainless steel. All the R series nozzles have a femalt NPT pipe connection. Bronze and... [See More]
- Application: Cleaning; Aeration
- Flow: 270 to 25020
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 100
from BETE Fog Nozzle, Inc.
Design Features. Advanced whirl plate design produces uniform coverage. Male and female connections. Spray Characteristics. Medium to coarse atomization. Spray pattern: Full Cone. Square pattern available. Spray angles: 30 °, 60 °, 90 ° and 120 ° standard. Flow rates: 0.13 to 59 gpm... [See More]
- Application: Cleaning
- Flow: 7.8 to 44.4
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 400
from General Pump
Spray Nozzle, 1/4 ″ Quick Disconnect. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application Flexibility. General... [See More]
- Application: Cleaning
- Inlet: 1/4" Quick Disconnect
- Media: Water
- Technology: Hydraulic
from Lechler, Inc.
Plastic clip-on nozzles offer many advantages for header installations. The simple fabrication methods allow inexpensive construction and versatility in operation. However there are some drawbacks which MemOSpray can eliminate.When changing old nozzles, the operator has to unscrew the retainer cap,... [See More]
- Application: Cleaning; Phosphating Lines
- Flow: 37.2 to 120
- Media: Water
- Maximum Pressure: 10 to 100
from Suttner America Company
The ST-60 is a downstream injector, relying on a pressure differential. The pressure differential is created by using a large orifice spray nozzle to lower pressure. [See More]
- Application: Cleaning
- Maximum Pressure: 3600
- Media: Chemical; Water
- Inlet: 3/8" MNPT
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: STF-Series spray nozzles produce a flat fan-shaped spray pattern, similar to the F Series. Spray density tapers off toward the outside edges of these sprays, to permit overlapping of spray patterns while maintaining uniform spray density. Spray angles are available for a 0... [See More]
- Application: Cleaning
- Flow: 9 to 1440
- Media: Water
- Maximum Pressure: 300
from General Pump
Nozzle 4-Pack, 1/4" Quick Disconnect. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application Flexibility. General Pump... [See More]
- Application: Cleaning
- Flow: 604
- Media: Water
- Maximum Pressure: 5000
from Lechler, Inc.
With its proven tank washer design, Lechler's line of Spinner tank cleaning nozzles offer performance similar to the Whirling Nozzle, but in a smaller package. The Spinner line is made of 316 stainless steel.The Mini Spinner combines cleaning effectiveness in a very small package. With a maximum... [See More]
- Application: Cleaning
- Flow: 660 to 1140
- Media: Other; Liquid
- Maximum Pressure: 20 to 60
from Suttner America Company
The ST-62 injector allows for water flow adjustment from the pressure pump. By adjusting the water flow through the ST-62, a restriction causes a vacuum which allows the detergent to be drawn through the hose barb when a large orifice nozzle is used. [See More]
- Application: Cleaning
- Maximum Pressure: 3600
- Media: Chemical; Water
- Inlet: 3/8" FNPT
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern with larger flow rates and smaller droplet sizes. Durable, one-piece, anti-clog design has no internal vane to clog or wear out. TYPICAL APPLICATIONS: - Air & Gas Washing. - Dust Suppression. - Spray Ponds. - Cooling Tunnels. - Medical... [See More]
- Application: Cleaning; Humidification
- Flow: 29.4 to 15420
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 300
from General Pump
Nozzle 5-Pack, 1/4" Quick Disconnect. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high pressure cleaning systems. Application Flexibility. General Pump... [See More]
- Application: Cleaning
- Flow: 503
- Media: Chemical; Water
- Maximum Pressure: 5000
from Lechler, Inc.
If your budget is tight but you still want the cleaning power of a rotating tank washer, the PVDF Mini-Whirling nozzle is for you. Using precision-molded PVDF, this tiny unit can clean kegs, drums and small tanks 3-5' in diameter with minimal amounts of solution. In addition to a 360º coverage... [See More]
- Application: Cleaning
- Flow: 240 to 408
- Media: Other; Liquid
- Maximum Pressure: 20 to 60
from Suttner America Company
In conjunction with a spray gun and upstream or downstream injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction ideal for food grade applications. [See More]
- Application: Cleaning
- Maximum Pressure: 900
- Media: Chemical
- Temperature Range: 300
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: F-Series spray nozzles produce a flat, fan-shaped spray pattern, with spray angles available from 15 ° to 110 ° measured at 40 psi. Spray angles generally increase with pressure, as shown in the capacity table. TYPICAL APPLICATIONS: Suitable for a variety of washing... [See More]
- Application: Cleaning
- Flow: 6.6 to 6600
- Media: Chemical; Water
- Maximum Pressure: 300
from General Pump
Rotating Nozzle. FEATURES. Heavy-duty, zero degree, rotating nozzle. Ideal for blasting applications. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high... [See More]
- Application: Cleaning; Blasting
- Flow: 480
- Media: Water
- Maximum Pressure: 3000
from Lechler, Inc.
For quick rinsing of small kegs, drums or carboys, this cluster nozzle offers a low cost alternative. The stationary head offers 120° or 240° coverage with a selection of flow rates. Although it doesn't rotate, this can give sufficient coverage for lighter washing requirements of vessels with... [See More]
- Application: Cleaning
- Flow: 108 to 180
- Media: Other; Liquid
- Maximum Pressure: 20 to 60
from Suttner America Company
Ideal for hard to reach applications, such as gutters underneath fender wells, truck bellies and heavy equipment. [See More]
- Application: Cleaning
- Maximum Pressure: 3050
- Media: Chemical
- Temperature Range: 300
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A wide, flat fan-shaped spray with low impact. The spray is deflected 75 ° away from the centerline of the pipe connection, as shown. TYPICAL APPLICATIONS: Wherever a low impact, wide angle spray is required. - Rinsing and Coolin. - Dishwashing. - Fertilizer Spraying. -... [See More]
- Application: Cleaning
- Flow: 1.8 to 882
- Media: Air; Chemical; Hydraulic; Steam; Water
- Maximum Pressure: 60
from General Pump
Rotating Nozzle. FEATURES. Heavy-duty, zero degree, rotating nozzle. Ideal for blasting applications. Performance. General Pump Spray Tips are built using an innovative design and manufacturing approach that ensures accuracy and provides consistent durability and performance for all types of high... [See More]
- Application: Cleaning; Blasting
- Flow: 600
- Media: Water
- Maximum Pressure: 5000
from Lechler, Inc.
Lechler's hollow cone nozzle utilizes a two-piece body and cap design. Tangential whirl chamber has large free passage with no internal parts, for clog resistant atomization. [See More]
- Application: Cleaning; Aeration, Filter Cleaning
- Flow: 3.6 to 12
- Media: Air
- Maximum Pressure: 10 to 100
from Suttner America Company
Ideal for one nozzle applications and quick exchange is not needed. To help choose the correct nozzle degree and orifice size, click the link above, "For help choosing the correct nozzle." [See More]
- Application: Cleaning
- Maximum Pressure: 4000
- Media: Water
- Orifice Size: 2
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A flat and thin fan-shaped spray with sharp definition on all edges. This spray delivers very high impact over the area covered. The spray is deflected by angle D away from the centerline of the spray nozzle. TYPICAL APPLICATIONS: - High impact applications. - Metal wash. -... [See More]
- Application: Cleaning
- Flow: 3.6 to 3480
- Media: Chemical; Water
- Maximum Pressure: 150
from General Pump
Rotating Nozzle, Shock Resistant Ceramic Internal Stabilization Spring, Can Be Operated in Any Direction, Designed for Lower Pressures. FEATURES. Strong brass structure. Highly shock resistant ceramic seat and nozzle. Oversized bearing for long life. Can be used in any position. General Pump Spray... [See More]
- Application: Cleaning
- Flow: 340
- Media: Water
- Maximum Pressure: 2300
from Lechler, Inc.
Mount shoulder to shoulder for an air-knife * Flat spray clears slots and wipes flat surfaces * Stackable for extra high power * Available in economical POM or aluminum for hard dutyThe original and still most popular design: * Standard POM version * Guarded orifice version for hand use * Aluminum... [See More]
- Application: Cleaning
- Flow: 2917 to 8573
- Media: Air
- Maximum Pressure: 15 to 75
from Suttner America Company
The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment. Always start turbo nozzles in down position. [See More]
- Application: Cleaning
- Maximum Pressure: 5000
- Media: Water
- Temperature Range: 212
from BEX Spray Nozzles
SPRAY CHARACTERISTICS: A hollow cone spray pattern, emerging at right angles to the centerline of the pipe connection. The standard included angle of the spray cone is 70 ° at 10 p.s.i. At low pressures hollow cone nozzles produce medium size, uniform droplets. At higher pressures finer droplets... [See More]
- Application: Cleaning; Humidification
- Flow: 5.4 to 2280
- Media: Chemical; Hydraulic; Water
- Maximum Pressure: 100
from General Pump
Rotating Nozzle, Shock Resistant Ceramic Internal Stabilization Spring, Can Be Operated in Any Direction, Designed to Operate at Pressures Most Common in the Market. FEATURES. Strong brass structure. Highly shock resistant ceramic seat and nozzle. Oversized bearing for long life. Can be used in any... [See More]
- Application: Cleaning
- Flow: 449
- Media: Water
- Maximum Pressure: 3650
from Lechler, Inc.
Low Pressure Flat FanLow pressure flat fan spray nozzles feature spray patterns from a narrow 15 ° spray angle to a wide flat fan pattern with a 110 ° spray angle.The internal geometry of each nozzle is specifically engineered to provide maximum uniformity of the spray angle and flow rate. [See More]
- Application: Cleaning; Washing, Lubricating
- Flow: 0.4800 to 1.5
- Media: Oil; Water
- Maximum Pressure: 10 to 100
from Suttner America Company
The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment. [See More]
- Application: Cleaning
- Maximum Pressure: 3000
- Media: Chemical
- Temperature Range: 300