1 1/4 NPT Plugs, Stoppers, and Inserts
from Keystone Electronics Corp.
Part Number: 8609. Color: Black. For Panel Thickness: .032 [.8] -.125 [3.2]. Hole Diameter: 1.250 [31.8]. Material: Nylon [See More]
- NPT Thread: 1 1/4" NPT
- Material: Nylon; Nylon
from Shenzhen Milvent Technology Co., Limited
Milvent Plastic M8x1.25 Breather Screw in Protective Air Vent Plug Waterproof and IP68. Ventilation and Waterproof. Please feel free to contact with us for datasheet and quote. Looking forward to your reply . thanks a lot! [See More]
- NPT Thread: 1 1/4" NPT; M8*1.25
- Material: PA6
from MOCAP LLC
Material: LDPE (Low Density Polyethylene). Stocked Material: LDPE (Black), LDPE (Natural). General Purpose Plug Designed to Protect Threads, Ports or Fittings from Damage, Debris and Contaminants. Flanged for Easy Removal [See More]
- NPT Thread: 1/4" NPT; 1 1/4" NPT; 1-1/4
- Straight Thread: M40x1.5, M42x3
- Features: Threaded; Flange
- Overall Length: 0.5906
from Caplugs
FP Series finishing plugs are designed for square tubing. These plugs are sized for different gauges, their shoulders fit flush with tubing sides and keep dirt and moisture out of sensitive areas. Protect against sharp tube edges. Provide clean finish on completed products. Material: Low-Density... [See More]
- NPT Thread: 1 1/4" NPT
- Material: Polyethylene (PE)
from HydraCheck Inc.
For use with the Pressure/Leak, Hand-operated Pump. These HydraCheck pressure/leak test connectors are designed exclusively for pressure/leak testing components with NPT connectors – you are ready to test!. Comes with STAUFF Test 20 connector. [See More]
- NPT Thread: 1/4" NPT; 3/8" NPT; 1/2" NPT; 3/4" NPT; 1" NPT; 1 1/4" NPT; 1 1/2" NPT
- Features: Threaded
- Shape / Application: Round; Screw Cap or Plug
from Keystone Electronics Corp.
Part Number: 7609. Finish/Plating: Nickel Plate. Hole Diameter: 1.250 [31.8]. Material: Steel. Type: Hole Plug [See More]
- NPT Thread: 1 1/4" NPT
- Material: Steel - Stainless; Steel
- Shape / Application: Round
from Shenzhen Milvent Technology Co., Limited
Ultra Thin and lower than 3mm of screw head. Easy to assemble. IP68,. Venting: >20cc/min@7kpa. Silver, Gold, Black color for selection. [See More]
- NPT Thread: 1 1/4" NPT; M8x1.25
- Material: Brass In Nickel Plate
from MOCAP LLC
Material: Paper (Brown). Environmentally Friendly and Economical Masking Solution. Does Not Promote Condensation [See More]
- NPT Thread: 1/4" NPT; 1 1/4" NPT; 1-1/4
- Overall Length: 0.6890
- BSP Thread: G1-1/4, G1-1/2
- Material: Paper
from Caplugs
The P Series plugs are available in six different styles for tapered and straight threads. Designed to keep out moisture, dirt and other contaminants in pipe fittings. Material: High-density polyethylene. Standard Color: Red [See More]
- NPT Thread: 1 1/4" NPT
- Material: Polyethylene (PE)
- Features: Threaded
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: M8x1.25-5mm metal Vent Plug. Waterproof, IP66,. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. Outdoor Enclosure etc. Performance: · Pressure equalization and release in order to extend seal life. · Prevent condensation. [See More]
- NPT Thread: 1 1/4" NPT; M8x1.25
- Material: Brass In Nickel Plate
- Features: Threaded
from MOCAP LLC
Material: LDPE (Low Density Polyethylene). Stocked Material: LDPE (Black). Designed to Protect Metric, BSP and NPT Pipe from Damage and Debris [See More]
- NPT Thread: 1/4" NPT; 1 1/4" NPT; 1-1/4"
- Material: Polyethylene (PE)
- BSP Thread: 1-1/4"
from Caplugs
SEP plugs are designed to fit inside both threaded and non-threaded bayonet-type connectors. Material: Static Dissipative Polyethylene. Standard Color: Pin. Optional Color: Available in other material & color options [See More]
- NPT Thread: 1 1/4" NPT
- Material: Polyethylene (PE)
- Features: Threaded
from Daemar Inc.
These tapered plugs were designed to cap NPT fittings, but have a universal design ideal for a variety of applications. These durable, multi-use plugs have a flange for easy installation and removal. Material: Low-Density Polyethylene Colour: Orange [See More]
- NPT Thread: 1 1/4" NPT
from Polymer Molding, Inc.
Designed similar to the tapered series, the P Series has the added feature of a pull-tab located on the top of the flange. Typical wall thickness: .032. Color: Blue. Material: Low Density Polyethylene. LDPE service temperature: 150 ° F (66 ° C). RoHS Compliant [See More]
- NPT Thread: 1 1/4" NPT
- Features: Threaded; Tapered; Flange; Pull Tab
- Shape / Application: Round
- Diameter: 1.6
from Daemar Inc.
Series P Pipe Plugs are available in three styles: square head, round head and recessed socket. They are molded in high density polyethylene and are ideal for keeping moisture, dirt and other contaminants from NPT-threaded ports. Material: High-Density Polyethylene Colour*: Red Applicable Specs:... [See More]
- NPT Thread: 1 1/4" NPT
- Features: Threaded
from Polymer Molding, Inc.
The PR Series Pull-Ring Plugs offer product protection with easy removal. The tapered style polyethylene plugs have built-in lift rings for easy installation and removal resulting in reduced product damage and increased cost savings. Ring design lays flat resulting in more efficient packaging. All... [See More]
- NPT Thread: 1 1/4" NPT
- Features: Threaded; Tapered; Flange; Pull Tab
- Shape / Application: Round
- Diameter: 1.5
from Polymer Molding, Inc.
The tapered style can either be used as a cap or plug, depending on application. Excellent for protecting threads and keeping unwanted contamination out of pipes, valves, tubing and most other cylindrical openings. The most economical solution for protecting standard size threads, unified threads,... [See More]
- NPT Thread: 1 1/4" NPT
- Features: Threaded; Tapered; Flange
- Shape / Application: Round
- Diameter: 1.45