Threaded Plugs, Stoppers, and Inserts
from HydraCheck Inc.
For use with the Pressure/Leak, Hand-operated Pump. These HydraCheck pressure/leak test connectors are designed exclusively for pressure/leak testing components with NPT connectors – you are ready to test!. Comes with STAUFF Test 20 connector. [See More]
- Shape / Application: Round; Screw Cap or Plug
- NPT Thread: 1/4" NPT; 3/8" NPT; 1/2" NPT; 3/4" NPT; 1" NPT; 1 1/4" NPT; 1 1/2" NPT
- Features: Threaded
from Caplugs
Designed to plug the more popular sizes of both threaded and non-threaded, bayonet type electrical and electronic connectors, CEP Conductive Plugs provide electrical shielding as well as mechanical protection. Applicable specifications: SAE AS85049/138. This product has been fabricated from a... [See More]
- Features: Threaded
- Material: Polyethylene (PE)
- NPT Thread: 1/2" NPT
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: NPT1/4 Metal Vent Plug. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. etc. Performance: · Pressure equalization and release in order to extend seal life. · Prevent condensation. · Block... [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: 1/4" NPT; NPT1/4
- Features: Threaded
- Material: AL
from RS Components, Ltd.
COVER CAPS, TYPE PG16 [See More]
- Features: Threaded
- Material: Nickel Plated Brass
- NPT Thread: PG16
from Arizona Sealing Devices, Inc.
Series ADP Plugs have a dimpled nose section that forms a low pressure seal with flareless tube ends. The addition of a neoprene shoulder gasket enables the ADP-GN to provide a positive seal on the spot face of the O-ring port. Gaskets are also optionally available in Butyl or Buna N rubber. [See More]
- Shape / Application: Round
- NPT Thread: 3/16 in
- Features: Threaded
- Material: Aluminum
from McGard Special Products Division
Plug Locks protect against water theft & losses. Registered key patterns. Simple one-piece construction. Easy installation. Constructed from heat treated alloy steel to prevent removal with common tools. Triple-nickel chrome plating to resist corrosion. Locks into standard NPT and coupling... [See More]
- Shape / Application: Round
- Overall Length: 0.5000 to 4
- Features: Threaded
from Festo Corporation
stop kit EADP-ES-R3-12 Size=12, Rotation angle adjustment range=0 - 325 deg, Assembly position=Any, Corrosion resistance classification CRC=1 - Low corrosion stress, Storage temperature=-20 - 60 °C [See More]
- Features: Threaded
from Altech Corp.
Features: Polyamide. 25 % glass fiber reinforced Characteristics: Metric Threads. Round, with slot [See More]
- Shape / Application: Round
- Straight Thread: 1
- Features: Threaded; Slotted Head
- Diameter: 0.5512
from Takachi Electronics Enclosure Co., Ltd.
Hole plug for sealing holes that are not in use. IP67 rating is achieved through the use of a lock nut. Available in 6 sizes for φ12.2 to φ40.3 holes in Black and Light gray colors. Waterproofing is not guaranteed when directly secured through thread holes. [See More]
- Shape / Application: Round
- Straight Thread: M12, M16, M20, M25, M32, M40
- Features: Threaded; Slotted Head
- Material: Nylon
from MOCAP LLC
Material: LDPE (Low Density Polyethylene). Stocked Material: LDPE (Black), LDPE (Natural). General Purpose Plug Designed to Protect Threads, Ports or Fittings from Damage, Debris and Contaminants. Flanged for Easy Removal [See More]
- Features: Threaded; Flange
- Overall Length: 0.1772
- Straight Thread: M10x1
- Material: Polyethylene (PE)
from Petersen Products Co.
By-Pass None. Country of Origin USA. Dia. Max 2.46" (62mm). Dia. Min 2.17" (55mm). Lngth, Overall 1.9" (48mm). Material, Body Glass Reinforced ABS. Material, Hardware Stainless Steel. Material, Seal Natural Rubber. Pipeline Max PSI 17 psi (1.19 bar). Pressure Pipeline Max Head 40 ft (12.19 m). Range... [See More]
- Shape / Application: Round
- NPT Thread: None
- Features: Threaded
- Material: Glass Reinforced ABS
from bisco industries
Hole Plugs [See More]
- Features: Threaded
- Material: Polyethylene (PE); HDPE High-Density Polyethylene
from Custom Fabricating & Supplies
Hanging threaded plugs combine hanging and masking capabilities all in one. Uses high temperature silicone rubber over-molded onto a threaded metal plug. Product Features. Temperature Rating: 600 ° F / 315 ° C. Silicone over-molding allows hanging, grounding and masking all in one part. [See More]
- Shape / Application: Screw Cap or Plug
- Features: Threaded
from ZAGO Manufacturing Company, Inc.
ZAGO offers clients a wide variety of custom services. Our cutting-edge machine shop has the capacity to rapidly produce specialty orders in small or large quantities. Our team is dedicated to producing the best products available that fit your exact specifications. ZAGO offers: Machine Parts... [See More]
- Features: Threaded
from Stock Drive Products & Sterling Instrument - SDP/SI
For power transmission applications, a belt and pulley drive system are one of the most common and cost-effective methods used to transfer motion in a drive system. synchronous timing belts, with their defined pattern and evenly spaced teeth, mate with matching timing belt pulleys and idlers to... [See More]
- Shape / Application: Round
- Straight Thread: #5-40
- Features: Threaded
- Overall Length: 1
from Caplugs
Series ETV external thread plugs are injection-molded vinyl. These flexible plugs can be easily pushed in and removed with no threading required. External threads hold plugs securely in place. These plugs are also available in temperature resistant Flex500 ® material (HETV series), ideal for... [See More]
- Features: Threaded
- Material: Vinyl
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: G1/8''. Please contact us for other thread. we can OEM rapidly. Waterproof, IP66,. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. etc. Performance: · Pressure equalization and release in order to extend seal life. · Prevent... [See More]
- Features: Threaded
- Material: Steel - Stainless; Stainless Steel
- NPT Thread: MIV-G1/8MS-10
from RS Components, Ltd.
HPM12 SLATE METRIC M12 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: M12
from Arizona Sealing Devices, Inc.
Series AFO Plugs are designed for positive, metal to metal threaded protection of fluid lines and fittings. Available with optional neoprene gaskets. Sealing gaskets are also available in Butyl or Buna N rubber. [See More]
- Shape / Application: Round
- Material: Aluminum
- Features: Threaded
from Festo Corporation
stop kit EADP-ES-R3-16 Size=16, Rotation angle adjustment range=0 - 325 deg, Assembly position=Any, Corrosion resistance classification CRC=1 - Low corrosion stress, Storage temperature=-20 - 60 °C [See More]
- Features: Threaded
from Takachi Electronics Enclosure Co., Ltd.
Protective vent protects the enclosure from deformation by equalizing internal and external pressure differences,. as well as venting the gas generated within the enclosure. IP68 protection class (water depth 2 meters / 60 mins) with an operating temperature range -40 °C ~ +125 °C. allows... [See More]
- Shape / Application: Round
- Material: Steel - Stainless (optional feature); PA6, Polycarbonate
- Features: Threaded; Vented
from MOCAP LLC
Material: PP (Polypropylene) (Red). Designed to Protect BSP Threads and Fittings from Damage, Dust, Debris and Contaminants. Knurled Head and Slot for Easy On-Off Application [See More]
- Features: Threaded; Knurled; Slotted Head
- Overall Length: 0.3504
- BSP Thread: G1/8
- Material: Polypropylene (PP)
from Petersen Products Co.
By-Pass None. Country of Origin USA. Dia. Max 3.5" (89mm). Dia. Min 3.23" (82mm). Lngth, Overall 2.2" (56mm). Material, Body Glass Reinforced ABS. Material, Hardware Stainless Steel. Material, Seal Natural Rubber. Pipeline Max PSI 17 psi (1.19 bar). Pressure Pipeline Max Head 40 ft (12.19 m). Range... [See More]
- Shape / Application: Round
- NPT Thread: None
- Features: Threaded
- Material: Glass Reinforced ABS
from bisco industries
Pressure and Drain Plugs [See More]
- Features: Threaded
from Custom Fabricating & Supplies
Our High Temp Self Threading Plugs were designed for superior sealing and holding power. These plugs will seal lead threads extremely well avoiding gauging issues. The plugs have a high-temperature resistance and won't break off during removal. They can be used on heli-coil sizes. Temperature... [See More]
- Shape / Application: Screw Cap or Plug
- Material: Vinyl; Vinyl
- Features: Threaded
from Caplugs
VTP Series vinyl plugs provide a snug fit when pushed into open ports, ensuring a tight closure that will not pop out accidentally during processing or shipping. A simple tug on the flanged lip of an installed VTP breaks the seal for easy removal. The plugs are molded from a specially formulated,... [See More]
- Features: Threaded; Tapered
- Material: Vinyl
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: M12x1.5-10mm. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS enclosure. [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: 1 1/2" NPT; M12X1.5
- Features: Threaded
- Material: pa6
from RS Components, Ltd.
HPM16 SLATE METRIC M16 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: M16
from Arizona Sealing Devices, Inc.
Designed for protection of 37 º flared fittings and straight-threaded ports, series ASP plugs have a nose section that seals on flared fittings without a gasket. The optional ASP-GN series has an added neoprene shoulder gasket for low-pressure sealing of threaded ports. Special gaskets are also... [See More]
- Shape / Application: Round
- Material: Aluminum
- Features: Threaded
from Festo Corporation
stop kit EADP-ES-R3-25 Size=25, Rotation angle adjustment range=0 - 325 deg, Assembly position=Any, Corrosion resistance classification CRC=1 - Low corrosion stress, Storage temperature=-20 - 60 °C [See More]
- Features: Threaded
from Takachi Electronics Enclosure Co., Ltd.
High durability yet highly affordable economical metal ventilation plug. IP68 protection class rated (water depth 2 meters / 60 mins). Ventilation plug protects the enclosure from deformation by equalizing internal and. external pressure differences, as well as venting the gas generated within the... [See More]
- Shape / Application: Round
- Straight Thread: M6, M12, M20
- Features: Threaded; Flange; Vented
- Fitted Depth: 0.5906 to 0.7441
from MOCAP LLC
Material: PP (Polypropylene) (Red). Designed to Protect Metric Threads and Fittings from Damage, Dust, Debris and Contaminants. Knurled Head and Slot for Easy On-Off Application [See More]
- Features: Threaded; Knurled; Slotted Head
- Material: Polypropylene (PP)
- Overall Length: 0.3504
from Petersen Products Co.
By-Pass None. Country of Origin USA. Dia. Max 4.25" (108mm). Dia. Min 3.78" (96mm). Lngth, Overall 2.2" (56mm). Material, Body Glass Reinforced ABS. Material, Hardware Stainless Steel. Material, Seal Natural Rubber. Pipeline Max PSI 17 psi (1.19 bar). Pressure Pipeline Max Head 40 ft (12.19 m). [See More]
- Shape / Application: Round
- NPT Thread: None
- Features: Threaded
- Material: Glass Reinforced ABS
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
from Custom Fabricating & Supplies
Product Features. Temperature Rating: 180 ° F / 82 ° C. For use in masking threaded holes. Creates an excellent seal especially for lead-in threads. Works well with Heli-Coil inserts. An inexpensive solution when high temperatures are not encountered. Use in anodizing, plating and wet... [See More]
- Shape / Application: Screw Cap or Plug
- Material: LDPE
- Features: Threaded
from Caplugs
The TB Series plugs are designed to protect British Standard Pipe fittings from contaminants and damage while providing protection for delicate threads. These plugs can be tightened with a screwdriver, hex wrench, or manually. TB plugs meet low-pressure testing requirements. Fits BSP Threads. Great... [See More]
- Features: Threaded
- Material: Polyethylene (PE)
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: M16x1.5-10mm. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. · Pressure equalization and release in order to extend seal life. · Prevent condensation. · Block contaminants like dust, dirt and debris. [See More]
- Features: Threaded
- Material: pa6
- NPT Thread: 1 1/2" NPT; M16X1.5
from RS Components, Ltd.
HPM20 SLATE METRIC M20 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: M20
from Arizona Sealing Devices, Inc.
Features: Threaded plug with a serrated grip (used for a variety of applications). Can be applied or removed by hand, hex wrench or screwdriver [See More]
- Shape / Application: Round
- NPT Thread: 9/16"-18
- Features: Threaded
- Material: Polyethylene (PE)
from Festo Corporation
stop kit EADP-ES-R3-32 Size=32, Rotation angle adjustment range=0 - 325 deg, Assembly position=Any, Corrosion resistance classification CRC=1 - Low corrosion stress, Storage temperature=-20 - 60 °C [See More]
- Features: Threaded
from Takachi Electronics Enclosure Co., Ltd.
IP68 protection class rated (water depth 2 meters / 60 mins) yet highly affordable economical ventilation plug. Ventilation plug protects the enclosure from deformation by equalizing internal and. external pressure differences, as well as venting the gas generated within the enclosure. Recommended... [See More]
- Shape / Application: Round
- Straight Thread: M6, M12, M16, M24
- Features: Threaded; Flange; Vented
- Fitted Depth: 0.5000 to 0.9291
from MOCAP LLC
Material: PP (Polypropylene). Stocked Material: PP (Red). Designed to Provide Positive Seal on SAE Straight-Thread Ports. Features a Molded-In O-Ring Style Bead and External Lip on the Flange to Seal Out Contaminants [See More]
- Features: Threaded; Flange
- Material: Polypropylene (PP)
- Overall Length: 0.3386
from Petersen Products Co.
By-Pass None. Country of Origin USA. Dia. Max 4.63" (118mm). Dia. Min 4.28" (109mm). Lngth, Overall 2.2" (56mm). Material, Body Glass Reinforced ABS. Material, Hardware Stainless Steel. Material, Seal Natural Rubber. Pipeline Max PSI 17 psi (1.19 bar). Pressure Pipeline Max Head 40 ft (12.19 m). [See More]
- Shape / Application: Round
- NPT Thread: None
- Features: Threaded
- Material: Glass Reinforced ABS
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
from Custom Fabricating & Supplies
Product Features. *Patent Pending*. Temperature Rating: 600 ° F / 315 ° C. For use in threaded holes when a watertight seal is needed. Strong enough to withstand pressure build-up. Insert by hand or with power tool for efficiency. Metric and standard, coarse and fine threads available. [See More]
- Shape / Application: Screw Cap or Plug
- Material: Rubber - Silicone; Silicone
- Features: Threaded
from Caplugs
TH Series threaded plugs are designed to protect internal threads during low pressure testing and in-plant process. Keeps contaminants and moisture from threaded ports. Oil & heat resistant to 250 ºF. Not for permanent applications. Hex design socket for installation and removal. Protects... [See More]
- Features: Threaded
- Material: Polyethylene (PE)
from Shenzhen Milvent Technology Co., Limited
Plastic Vents. Thread: M18x1.5. Waterproof, IP66,. Breather able. Application: · Pressure equalization and release in order to extend seal life. · Prevent condensation. · Block contaminants like dust, dirt and debris. · Low cost Vent instead of traditional breather plug". Please... [See More]
- Features: Threaded
- Material: PA6
- NPT Thread: 1 1/2" NPT; M18x1.5
from RS Components, Ltd.
HPM25 SLATE METRIC M25 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: M25
from Arizona Sealing Devices, Inc.
Features: Can be applied or removed by hand, hex wrench or screwdriver. Optional O-ring gives this part a water tight seal for superior leakage protection. The BL4A and the BL4B are in black [See More]
- Shape / Application: Round
- NPT Thread: 1/2" NPT
- Features: Threaded
- Material: Polypropylene (PP)
from Takachi Electronics Enclosure Co., Ltd.
Stainless steel protective vent for superior durability and chemical resistance. IP68 protection class (water depth 2 meters / 60 mins) and -40 ℃ ~ +125 ℃ operating temperature range allows it to be used in various environments. Suitable for enclosures with capacities of 20 liters or... [See More]
- Shape / Application: Round
- Material: Steel - Stainless
- Features: Threaded; Vented
from MOCAP LLC
Material: PP (Polypropylene). Stocked Material: PP (Red). Designed to Protect Threads from Dirt, Dust and Moisture During Low-Pressure Testing and In-Plant Handling [See More]
- Features: Threaded
- Overall Length: 0.5000
- NPT Thread: 1/4" NPT; 1/4 - 18
- Material: Polypropylene (PP)
from Petersen Products Co.
By-Pass None. Country of Origin USA. Dia. Max 1.63" (41mm). Dia. Min 1.48" (38mm). Lngth, Overall 2.5" (64mm). Material, Body Polypropylene. Material, Seal Natural Rubber. Nominal Pipe 1.5" (38mm). Pipeline Max PSI 22 psi (1.49 bar). Pressure Pipeline Max Head 50 ft (15.24 m). Sage Subcategory... [See More]
- Shape / Application: Round
- NPT Thread: None
- Features: Threaded
- Material: Polypropylene (PP); Polypropylene
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
from Custom Fabricating & Supplies
Product Features. *Patent Pending*. Temperature Rating: 600 ° F / 315 ° C. For use in threaded holes when a watertight seal is needed. Strong enough to withstand pressure build-up. Insert by hand or with power tool for efficiency. Metric and standard, coarse and fine threads available. [See More]
- Shape / Application: Screw Cap or Plug
- Material: Rubber - Silicone; Silicone
- Features: Threaded
from Caplugs
HVTP high-temperature, Flex500 ™ plugs provide a snug fit when pushed into open ports, ensuring a tight closure that will not pop out accidentally during processing or shipping. A simple tug on the flanged lip of an installed HVTP breaks the seal for easy removal. Ideal for masking... [See More]
- Features: Threaded; Tapered
- Material: Vinyl
from Shenzhen Milvent Technology Co., Limited
Battery Pack Ex-proof Valve. Thread: M32x1.5. Waterproof, IP66, IP67, IP68. Breather able. Application: E-car Battery Pack ex-proof Valve. · Pressure equalization and release in order to extend seal life. · Can open the valve rapidly when heating up under a abnormal status. · Prevent... [See More]
- Features: Threaded
- Material: PA6
- NPT Thread: 1 1/2" NPT; M32x1.5
from RS Components, Ltd.
HPM32 SLATE METRIC M32 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: M32
from Arizona Sealing Devices, Inc.
Features: Can be applied or removed by hand, hex wrench or screwdriver. The FP series plugs will fit NS and NF Class 1-2-3 standard threads. Optional O-ring gives this part a watertight seal for superior leakage protection [See More]
- Shape / Application: Round
- NPT Thread: 7/16"-20
- Features: Threaded
- Material: Polypropylene (PP)
from MOCAP LLC
Material: LDPE (Low Density Polyethylene) (Red). Designed to Simply Snap into Place to Protect Threads [See More]
- Features: Threaded
- Material: Polyethylene (PE)
- Overall Length: 0.2205
from Petersen Products Co.
By-Pass None. Country of Origin USA. Dia. Max 2.09" (53mm). Dia. Min 1.89" (48mm). Lngth, Overall 3" (76mm). Material, Body Polypropylene. Material, Seal Natural Rubber. Nominal Pipe 2" (51mm). Pipeline Max PSI 22 psi (1.49 bar). Pressure Pipeline Max Head 50 ft (15.24 m). Sage Subcategory Number... [See More]
- Shape / Application: Round
- NPT Thread: None
- Features: Threaded
- Material: Polypropylene (PP); Polypropylene
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
from Custom Fabricating & Supplies
Product Features. Temperature Rating: 600 ° F / 315 ° C. For use in blind, threaded holes. Designed to mask lead-in thread chamfers. Handle aids in placement and removal. Color coded for easy identification. Used in Powder Coating, E-Coating, Wet Painting, Anodizing and Plating. Custom... [See More]
- Shape / Application: Screw Cap or Plug
- Material: Rubber - Silicone; Silicone
- Features: Threaded
from Caplugs
The TM series is designed to protect metric threads from damage and contaminants. The plugs knurled head and screwdriver slot allow for easy installation and removal. Fits metric threads. Easy to use. Range of sizes. Material: Linear low-density polyethylene. Standard Color: Yellow [See More]
- Features: Threaded
- Material: Polyethylene (PE)
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: M3x0.5-12mm. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. etc. Performance: · Pressure equalization and release in order to extend seal life. · Prevent condensation. · Block contaminants... [See More]
- Features: Threaded
- Material: SUS303
- NPT Thread: 1/2" NPT; M3x0,5-12
from RS Components, Ltd.
HPP13 SLATE PG13 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: PG13.5
from Arizona Sealing Devices, Inc.
Features: Series accommodates an extensive range of metric and BSP/Gas threaded sizes. Knurled head for easy grip. Secure fit for excellent protection against dirt, moisture and corrosion. [See More]
- Shape / Application: Round
- NPT Thread: M8 x 1
- Features: Threaded
- Material: Polyethylene (PE)
from MOCAP LLC
Material: PP (Polypropylene), Nylon. Stocked Material: PP (Red), NYLON (Yellow). Designed with Five Complete Threads Plus an Integrated Sealing Lip for a Tight Fit. Also Available with a Factory Fit Neoprene O-Ring when a Secure Seal is Required [See More]
- Features: Threaded
- Material: Nylon; Polypropylene (PP)
- BSP Thread: 1/4" BSP; G1/4
from Petersen Products Co.
By-Pass None. Country of Origin USA. Dia. Max 3.09" (78mm). Dia. Min 2.89" (73mm). Lngth, Overall 3.7" (94mm). Material, Body Polypropylene. Material, Seal Natural Rubber. Nominal Pipe 3" (76mm). Pipeline Max PSI 13 psi (0.90 bar). Pressure Pipeline Max Head 30 ft (9.14 m). Sage Subcategory Number... [See More]
- Shape / Application: Round
- NPT Thread: None
- Features: Threaded
- Material: Polypropylene (PP); Polypropylene
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
from Caplugs
The MT Series is designed to protect metric fittings with five complete threads to provide a tight fit and secure seal. May be applied or removed with a screwdriver, socket wrench or manually. Plugs metric threads. Easy installation and removal. Provides tight seal. Material: Nylon 6. Standard... [See More]
- Features: Threaded
- Material: Nylon
from Shenzhen Milvent Technology Co., Limited
M6x1.0 Metal Vent Plug, Venting Screw, Breather Vent Plug, Waterproof Metal Vents. Breather Plug. Thread: M6x1.0 metal Vent Plug. Part no.: MIV-06MB(black color). Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. Outdoor Enclosure... [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: 1" NPT; M6x1.0
- Features: Threaded
- Material: Brass In Nickel Plate
from RS Components, Ltd.
HPP16 SLATE PG16 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: PG16
from Arizona Sealing Devices, Inc.
Features: Series accommodates an extensive range of metric and BSP/Gas threaded sizes. Knurled head for easy grip. Secure fit for excellent protection against dirt, moisture and corrosion [See More]
- Shape / Application: Round
- NPT Thread: M10 x 1
- Features: Threaded
- Material: Polyethylene (PE)
from MOCAP LLC
Material: PP (Polypropylene), Nylon. Stocked Material: PP (Red), NYLON (Yellow). Designed with Five Complete Threads Plus an Integrated Sealing Lip for a Tight Fit. Also Available with a Factory Fit Neoprene O-Ring when a Secure Seal is Required [See More]
- Features: Threaded
- Material: Nylon; Polypropylene (PP)
from Petersen Products Co.
By-Pass None. Country of Origin USA. Dia. Max 4.09" (104mm). Dia. Min 3.87" (98mm). Lngth, Overall 3.5" (89mm). Material, Body Polypropylene. Material, Seal Natural Rubber. Nominal Pipe 4" (102mm). Pipeline Max PSI 13 psi (0.90 bar). Pressure Pipeline Max Head 30 ft (9.14 m). Sage Subcategory Number... [See More]
- Shape / Application: Round
- NPT Thread: None
- Features: Threaded
- Material: Polypropylene (PP); Polypropylene
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
from Caplugs
MSP Series plugs feature two concentric raised rings on the underside of the flange to provide a positive seal. Designed with a cross-slotted head making it easy to tighten with a screwdriver. Makes a positive seal when installed. Slotted to be tightened or removed with a screwdriver. Material:... [See More]
- Features: Threaded
- Material: Polyethylene (PE)
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: M12x1.5-10mm. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS enclosure. [See More]
- Features: Threaded
- Material: pa6
- NPT Thread: 1 1/2" NPT; M12X1.5
from RS Components, Ltd.
HPP21 SLATE PG21 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: PG21
from Arizona Sealing Devices, Inc.
Features: The double sealing ring design on the underside of the flange provides a positive seal. Design includes five complete threads for a secure fit. Can be applied or removed with a screwdriver, spanner, socket or allen key. Head designed not to trap liquid. The nylon material absorbs paint,... [See More]
- Shape / Application: Round
- Material: Nylon
- Features: Threaded
from MOCAP LLC
Material: PP (Polypropylene), Nylon. Stocked Material: PP (Red), NYLON (Yellow). Designed with Five Complete Threads Plus an Integrated Sealing Lip for a Tight Fit. Also Available with a Factory Fit Neoprene O-Ring when a Secure Seal is Required [See More]
- Features: Threaded
- Material: Nylon; Polypropylene (PP)
- Overall Length: 0.4291
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
from Caplugs
Designed to plug NPT fittings, the EZP series plugs can also be used to protect a variety of items. A heavy-duty, tapered, multi-use cap with a flange for easy insertion and removal. NPT Tapered Design. Flange for easy installation and removal. Material: LDPE. Standard Color: Orange [See More]
- Features: Threaded
- Material: Polyethylene (PE)
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: M4x0.7-4.5mm. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. etc. Performance: · Pressure equalization and release in order to extend seal life. · Prevent condensation. · Block contaminants... [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: M4x0.7-4.5
- Features: Threaded
- Material: SUS303
from RS Components, Ltd.
HPP29 SLATE PG29 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: PG29
from MOCAP LLC
Material: PP (Polypropylene). Stocked Material: PP (Red). Designed to Protect Threads from Dirt, Dust and Moisture During Low-Pressure Testing and In-Plant Handling. Flange Allows for Protection of the Outside of Port [See More]
- Features: Threaded; Flange
- Material: Polypropylene (PP)
- NPT Thread: 1/8" NPT; 1/8 - 27
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
- Material: Nylon; Nylon 6/6
from Caplugs
PTM-SH Series Ultrabake ™ silicone cap-plugs are designed to be used during the coating of pipes in the pipe fabrication and coating industries. This series was developed to mask the internally threaded ends of tubing to prevent the coating from getting inside. Tear-away venting nipple allows... [See More]
- Features: Threaded
- Material: Rubber - Silicone
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: M12X1.5 metal Vent Plug. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. Outdoor Enclosure etc. Performance: · Pressure equalization and release in order to extend seal life. · Prevent... [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: 1 1/2" NPT; M12X1.5
- Features: Threaded
- Material: Steel - Stainless; Stainless Steel
from RS Components, Ltd.
HPP7 SLATE PG7 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: PG7
from MOCAP LLC
Material: PP (Polypropylene). Stocked Material: PP (Red). Designed to Protect Threads from Dirt, Dust and Moisture During Low-Pressure Testing and In-Plant Handling [See More]
- Features: Threaded
- Overall Length: 0.3701
- NPT Thread: 1/8" NPT; 1/8 - 27
- Material: Polypropylene (PP)
from bisco industries
Threaded Caps and Plugs [See More]
- Features: Threaded
- Material: Polyethylene (PE); HDPE
from Caplugs
PDE Series threaded plugs are designed to fit tube and nut assemblies interchangeably. Knurled to aid with finger tightening installation and removal. Fits common thread sizes. Knurled for ease of use. Material: Low-density polyethylene. Standard Color: Red [See More]
- Features: Threaded
- Material: Polyethylene (PE)
- NPT Thread: 7/8
from Shenzhen Milvent Technology Co., Limited
G1/4''' or G thread type Breather Milvent. Waterproof, IP66,. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. Outdoor Enclosure etc. Performance: · Pressure equalization and release in order to extend seal life. · Prevent condensation. · Block... [See More]
- Features: Threaded
- Material: Plastic
- NPT Thread: 1/4" NPT; G1/4
from RS Components, Ltd.
HPP9 SLATE PG9 HOLE PLUG [See More]
- Features: Threaded
- Material: Chloroprene Rubber (O-Ring/Seal), Polyamide
- NPT Thread: PG9
from MOCAP LLC
Material: PP (Polypropylene). Stocked Material: PP (Red). Designed to Provide a Positive Seal on SAE Straight-Thread O-Ring Type Ports and Mil-MS-33649 Bosses. Features Molded-In O-Ring Style Bead on the Outside of Head to Seal the Port Face from Oil Leakage [See More]
- Features: Threaded
- Material: Polypropylene (PP)
- Overall Length: 0.3189
from Caplugs
The P Series plugs are available in six different styles for tapered and straight threads. Designed to keep out moisture, dirt and other contaminants in pipe fittings. Material: High-density polyethylene. Standard Color: Red [See More]
- Features: Threaded
- Material: Polyethylene (PE)
- NPT Thread: 1 1/4" NPT
from Shenzhen Milvent Technology Co., Limited
This order link is for 100pcs. This kind of IP69K Powertrain Vents Screw-in Type M20x1.5 is good for Powertrain, Gearbox, New Energy Battery Pack IP69K, IP68, Breather with Valve. Milvent Venting Plug for Outdoor automotive Protection Harsh or changing environmental conditions such as powertrain... [See More]
- Shape / Application: Round; Screw Cap or Plug
- Fitted Depth: 0.0591
- Features: Threaded
- Material: Aluminum
from RS Components, Ltd.
SHUTTER COVER M25 [See More]
- Features: Threaded
- NPT Thread: M25
from MOCAP LLC
Material: LDPE (Low Density Polyethylene) (Red). Designed for Maximum Flexibility to Fit Many Different Thread Types and Sizes with a Simple Push-In and Turn to Lock-In-Place [See More]
- Features: Threaded
- BSP Thread: 1/8"
- NPT Thread: 1/8" NPT; 1/8"
- Overall Length: 0.5315
from Caplugs
PDO Series threaded plastic plugs are designed to provide a positive seal for SAE straight-threaded O-Ring type ports and bosses on fluid power components. Integral O-Ring-type bead seals in the bevel of the port to prevent fluid leakage or entrance of contaminants. Molded in seal bead. Fits common... [See More]
- Features: Threaded
- Material: Polyethylene (PE)
- NPT Thread: 7/16
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: M20 Vent Plug. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. Outdoor Enclosure etc. Performance: · Pressure equalization and release in order to extend seal life. · Prevent condensation. ·... [See More]
- Features: Threaded
- Material: Plastic
- NPT Thread: 1 1/2" NPT; M20x1.5
from RS Components, Ltd.
SHUTTER COVER M32 [See More]
- Features: Threaded
- NPT Thread: M32
from Caplugs
The EP series plugs for threaded connectors are designed for easy application and removal in areas not accessible. They can be installed to fit threaded or smooth cylindrical surfaces. Material: Low-Density Polyethylene. Standard Color: Yellow [See More]
- Features: Threaded
- Material: Polyethylene (PE)
from Shenzhen Milvent Technology Co., Limited
Breather Plug. Thread: m20 metal Vent Plug. Waterproof, IP66, IP67, IP68. Breather able. Application: Lighting, Solar, Telecom, Automotive, Agriculture. WIFI GPS. Outdoor Enclosure, Gear Box, Motor Shell etc.,. Performance: · Pressure equalization and release in order to extend seal life. [See More]
- Features: Threaded
- Material: Steel - Stainless; Stainless Steel
- NPT Thread: 1 1/2" NPT; M20x1.5
from RS Components, Ltd.
HOLE PLUG METRIC THREAD M20 BLACK [See More]
- Features: Threaded
- Material: Plastic
- NPT Thread: M20
from Remke Industries
Dome Cap Cable Glands provide easy handling, quick installation, impact & abrasion resistance even at very low temperatures. These connectors are designed to withstand the rigors of continuous flexing & bending with ease and can be used with a wide range of cables both indoors &... [See More]
- Shape / Application: Round
- Material: Nylon
- Features: Threaded; Slotted Head
from U.S. Plastic Corporation
These are Schedule 80 PVC threaded fittings. Schedule 80 is also NSF listed, has a 33 F - 140 F working temperature, and is available in gray. For UV resistance of PVC pipe and fittings, paint with a white water based latex paint. All Schedule 80 threaded fittings are manufactured in strict... [See More]
- Features: Threaded
- Material: Vinyl
from Polymer Molding, Inc.
Designed for use on flared JIC fittings. Parts are knurled to aid in insertion and removal. Positive seal for low pressure requirements. Typical wall thickness: .032. Color: Red. Material: Low Density Polyethylene. LDPE service temperature: 150 ° F (66 ° C). Available specs: MIL-C-5501/1... [See More]
- Shape / Application: Round
- Straight Thread: 5/16" x 24 Threads
- Features: Threaded; Knurled
- Fitted Depth: 0.4100
from Taylor Made Plastics, Inc.
The inflatable pressure plugs come in a wide range of sizes and PSI ratings. The great thing about these plugs is the durability and the size range of the multi-size plugs. Along with these durable plugs we carry a nice selection of accessories that make these plugs safe and easy to use. [See More]
- Shape / Application: Round; Maxi Plug Pillow Shape
- Diameter: 23.6 to 39.4
- Features: Threaded
- Overall Length: 82.7
from Essentra Components
First Thread Protection Plugs mask the first thread of standard female threads during powder coating, e-coating, anodizing, plating, blasting, or painting. The EPDM or silicone material has excellent chemical resistance and the hollow core allows for a flexible fit. [See More]
- Features: Threaded
- Material: Rubber - Silicone; 55 Shore A Silicone
from Oil-Rite Corp.
Vent Plugs with Filters can be used to relieve pressure or vacuum on bearing housings, gear boxes, reservoirs, or any application where venting is necessary. These vent plugs assure pressure equalization and minimize undesirable problems, such as bearing seal blowout due to excessive pressure. The... [See More]
- Features: Threaded; Vented
- Material: Brass
- NPT Thread: 3/8" NPT
from Appleton Electric
THREADED TYPE. ACSEW CONTROL OPERATOR USED ON. CLASS I DIV 1 AND 2 GROUP B C D, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III, NEMA 4/7B/7C/7D/9E/9F/9G ENCLOSURE. 3/4 INCH NPSM TRADE SIZE. RECESSED HEAD STYLE. APPLETON[R] BRAND [See More]
- Features: Threaded
from icotek Corp
The openings at the fastening points of the cable entry frames can be closed with the cover plugs. There are two versions: One version to cover the openings when using threaded bushings, one to cover the screws. The cover plugs can be used with the products of the KEL series. The cover plugs can... [See More]
- Features: Threaded
- Material: Polyethylene (PE); Polyethylene
from IDEX Health & Science
Our Delrin Plug is manufactured from Delrin offering excellent chemical resistance. It is specifically designed to close off unused ports in valves and multi-port connectors. It has a Standard Knurl Head Style. It is for 5/16-24 Flat-Bottom and comes in white. [See More]
- Shape / Application: Round
- Material: Delrin
- Features: Threaded
from Reid Supply
These pull dowels have a tapped hole which permits easy removal. The style with flat has a ground flat on one side of the pin for easy removal.These pull dowels have a tapped hole which permits easy removal. Heat treated to RC58-62 min. O.D. tolerance is +.0001"/.0003" (M6).These pull dowels have a... [See More]
- Features: Threaded
- Material: Steel - Stainless; Steel
- Overall Length: 2.5
from Hi-Tech Seals, Inc.
The flared- fitting plugs are commonly used by hydraulic companies. This protector will meet low- pressure requirements. Note that unlike most other plugs, this plug is made with high-density polyethylene. [See More]
- Shape / Application: Round
- NPT Thread: 1/4" NPT (optional feature); 3/8" NPT (optional feature); 1/2" NPT (optional feature); 3/4" NPT (optional feature); 1" NPT (optional feature); 1 1/4" NPT (optional feature); 1 1/2" NPT (optional feature); 2" NPT (optional feature)
- Features: Threaded; Tapered (optional feature)
- Diameter: 0.3750 to 2
from NBK America LLC
Screw plugs for high-power hydraulic applications. SFF is made of steel and can be used in highpressure applications up to 49 MPa. [See More]
- Shape / Application: Round
- BSP Thread: G1/8
- Features: Threaded; Tapered; Flange
- Fitted Depth: 0.3937
from Flomatic Valves
BREAK-OFF PLUG - Stainless steel construction. Threaded to install into valve. When broken off, riser pipe drains. * For use ONLY with Model 80MDW-VFD Deep Well. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Features: Threaded
- Material: Steel - Stainless
- Straight Thread: 2 3/8" - 9 5/8"
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Round; Screw Cap or Plug
- NPT Thread: 1/2" NPT
- Features: Threaded; Slotted Head; Recessed Socket
- Fitted Depth: 0.5700
from BOXCO Inc.
Material : nylon plastic. Protection degree : IP54. Ambient temperature : -40C to 100C. Supply color : Grey, Black [See More]
- Shape / Application: Round; Screw Cap or Plug
- Diameter: 0.5906
- Features: Threaded; Flange; Slotted Head
- Fitted Depth: 0.3346
from Daemar Inc.
Series ADP Plugs have a dimpled nose section that forms a low pressure seal with flareless tube ends. The addition of a neoprene shoulder gasket enables the ADP-GN to provide a positive seal on the spot face of the O-ring port. Gaskets are also optionally available in Butyl or Buna N rubber. [See More]
- Features: Threaded
- Material: Aluminum
from Fibox Enclosures
Maintain your type 4 rating with a NEMA 4 vent kit. These ventilation kits ensure proper ventilation for an electrical enclosure, and allow for needed airflow for critical electronic components housed in your NEMA enclosure. Fibox ’s enclosure ventilation device features a molded in place... [See More]
- Shape / Application: Round
- Straight Thread: M12 x 1.5
- Features: Threaded; Flange; Vented
from Remke Industries
Dome Cap Cable Glands provide easy handling, quick installation, impact & abrasion resistance even at very low temperatures. These connectors are designed to withstand the rigors of continuous flexing & bending with ease and can be used with a wide range of cables both indoors &... [See More]
- Shape / Application: Round
- Material: Nylon
- Features: Threaded; Slotted Head
from U.S. Plastic Corporation
Service temperature 33 F - 140 F. Not for use with compressed air or gases. Resists chemical attack by most acids, alkalies, salts, fungi and bacterial action. Non-toxic, odorless and tasteless. Resistant to cracking so it is machinable. PSI is based on water at 73 F. Schedule 40 is for socket... [See More]
- Features: Threaded
- Material: Vinyl
from Polymer Molding, Inc.
Designed similar to the tapered series, the P Series has the added feature of a pull-tab located on the top of the flange. Typical wall thickness: .032. Color: Blue. Material: Low Density Polyethylene. LDPE service temperature: 150 ° F (66 ° C). RoHS Compliant [See More]
- Shape / Application: Round
- NPT Thread: 1/4" NPT
- Features: Threaded; Tapered; Flange; Pull Tab
- Straight Thread: 1/2" Standard Threaded
from Essentra Components
First Thread Protection Plugs mask the first thread of standard female threads during powder coating, e-coating, anodizing, plating, blasting, or painting. The EPDM or silicone material has excellent chemical resistance and the hollow core allows for a flexible fit. [See More]
- Features: Threaded
- Material: Ethylene Propylene Diene Monomer
from Oil-Rite Corp.
Vent plugs with Deflectors feature a sturdy one-piece construction, safe for use anywhere. They are used on bearings, gear boxes, reservoirs, and any application where pressure or vacuum relief is necessary. They can also be used as filler plugs. This vent plug features a splash deflector to prevent... [See More]
- Features: Threaded; Vented
- Material: Steel
- NPT Thread: 1" NPT
from Appleton Electric
THREADED TYPE. STEEL MATERIAL. ZINC ELECTROPLATED FINISH. THREADED RIGID METAL/IMC CONDUIT USED ON. UL 886, CSA C22.2 APPROVAL. CLASS I DIV 1 AND 2 GROUP A B C D, CLASS II DIV 1 AND 2 GROUP E F G, CLASS III ENCLOSURE. 1 INCH TRADE SIZE. RECESSED HEAD STYLE. UNILETS[R] BRAND. CONSTRUCTIONAL FEATURE... [See More]
- Features: Threaded
- Material: Steel - Stainless
from icotek Corp
The openings at the fastening points of the cable entry frames can be closed with the cover plugs. There are two versions: One version to cover the openings when using threaded bushings, one to cover the screws. The cover plugs can be used with the products of the KEL series. The cover plugs can... [See More]
- Features: Threaded
- Material: Polyethylene (PE); Polyethylene
from IDEX Health & Science
Our Extra Long PEEK Plug is biocompatible and offers excellent chemical resistance. It is specifically designed to close off unused ports in valves and multi-port connectors. It has a Standard Knurl Head Style. It is for 10-32 Coned Ports and comes in natural and black. [See More]
- Shape / Application: Round
- Material: Polyetheretherketon (PEEK)
- Features: Threaded; Knurled
from Reid Supply
We stock a selection of accessories for our line of fluid level indicators. Parts include breather caps, plugs, viewports, and oil level indicators. . Polyamide Based Technopolymer Fluid Level Indicator Cap is wide with a transparent window to view liquid levels. [See More]
- Features: Threaded
- Overall Length: 0.7200
- NPT Thread: 1/2" NPT
- Material: Polyamide-Based Technopolymer
from Hi-Tech Seals, Inc.
With the exception of the Vinyl plug, Hi-Tech Seals carries plugs made of a low-density polyethylene. The various style cap and plug styles are only a few of the many protectors sold buy Hi-Tech Seals to protect the threads of pipes. Caps and plugs are excellent for protecting threading from damage... [See More]
- Shape / Application: Round; Square Head Plug
- Diameter: 0.1770 to 8.12
- Features: Threaded
- Fitted Depth: 1
from NBK America LLC
Screw plugs for high-power hydraulic applications. SFF is made of steel and can be used in highpressure applications up to 49 MPa. [See More]
- Shape / Application: Round
- BSP Thread: G1/8
- Features: Threaded; Tapered; Flange
- Fitted Depth: 0.3937
from Flomatic Valves
BREAK-OFF PLUG - Stainless steel construction. Threaded to install into valve. When broken off, riser pipe drains. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Features: Threaded
- Material: Steel - Stainless
- Straight Thread: 2 - 12 inch (50 mm - 300 mm)
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Round; Screw Cap or Plug
- Straight Thread: 1/2-20 UNF
- Features: Threaded; Knurled
- Fitted Depth: 0.6800
from Daemar Inc.
Series AFO Plugs are designed for positive, metal to metal threaded protection of fluid lines and fittings. Available with optional neoprene gaskets. Sealing gaskets are also available in Butyl or Buna N rubber. Material: 3003-0 Aluminum Alloy Colour: Natural (Silver) [See More]
- Features: Threaded
- Material: Aluminum
from Remke Industries
Dome Cap Cable Glands provide easy handling, quick installation, impact & abrasion resistance even at very low temperatures. These connectors are designed to withstand the rigors of continuous flexing & bending with ease and can be used with a wide range of cables both indoors &... [See More]
- Shape / Application: Round
- Material: Nylon
- Features: Threaded; Vented
from Polymer Molding, Inc.
Push-In Plugs are designed to snap-fit into specific thread sizes. They are less labor intensive to install than threaded plugs yet provide an attractive flush finish to your product. Typical wall thickness: .032. Color: Yellow. Material: Low Density Polyethylene. LDPE service temperature: 150 °... [See More]
- Shape / Application: Round; Button Plug
- Straight Thread: Standard Thread 1/4"
- Features: Threaded; Flange
- Diameter: 0.2050
from Essentra Components
LDPE NPT Thread Plugs are specifically designed to be used when plugging NPT tapered threaded fittings. The tapered design allows each part to plug multiple inner diameters to guard against damage from dirt, oil, and moisture. [See More]
- Features: Threaded
- Material: Polyethylene (PE); Low Density Polyethylene
from Oil-Rite Corp.
Vent plugs with Deflectors feature a sturdy one-piece construction, safe for use anywhere. They are used on bearings, gear boxes, reservoirs, and any application where pressure or vacuum relief is necessary. They can also be used as filler plugs. This vent plug features a splash deflector to prevent... [See More]
- Features: Threaded; Vented
- Material: Steel
- NPT Thread: 1/8" NPT
from Appleton Electric
THREADED TYPE. STEEL MATERIAL. ZINC ELECTROPLATED FINISH. THREADED METAL CONDUIT USED ON. UL 886 APPROVAL. CLASS I GROUP A B C D, CLASS II GROUP E F G, CLASS III ENCLOSURE. 1 INCH TRADE SIZE. SQUARE HEAD STYLE. UNILETS. BRAND. APPLICABLE STANDARD NEC 501-4(A), NEC 501-4(B). PLG MODEL [See More]
- Features: Threaded
- Material: Steel - Stainless
from icotek Corp
The openings at the fastening points of the cable entry frames can be closed with the cover plugs. There are two versions: One version to cover the openings when using threaded bushings, one to cover the screws. The cover plugs can be used with the products of the KEL series. The cover plugs can... [See More]
- Features: Threaded
- Material: Polyethylene (PE); Polyethylene
from IDEX Health & Science
Our PEEK Plug is biocompatible and offers excellent chemical resistance. It is specifically designed to close off unused ports in valves and multi-port connectors. It has a Standard Knurl Head Style. It is for 10-32 Coned Ports and comes in natural and black. [See More]
- Shape / Application: Round
- Material: Polyetheretherketon (PEEK)
- Features: Threaded; Knurled
from Reid Supply
We stock a selection of accessories for our line of fluid level indicators. Parts include breather caps, plugs, viewports, and oil level indicators. . Polyamide Based Technopolymer Fluid Level Indicator Cap is .940 in wide with a transparent window to view liquid levels. [See More]
- Features: Threaded
- Width: 0.9400
- NPT Thread: 1/2" NPT
- Overall Length: 0.7200
from Hi-Tech Seals, Inc.
End Protectors are used to protect the pipe threads for tool joints of downhole tools, during shipping and storage. The distinct styles are selected based on the type of tool or threading involved. Tool joint protectors are designed for API threads. [See More]
- Shape / Application: Round
- Features: Threaded; Tapered
from NBK America LLC
Because an O-ring is included, grooving is not required on the surface surrounding the female screw. Because this is a parallel thread, strain on the female screw like a tightened taper thread does not occur. It is suitable for hydraulic equipment/pneumatic devices that are often mounted and... [See More]
- Shape / Application: Round
- Straight Thread: M10
- Features: Threaded; Flange
- Fitted Depth: 0.3150
from Flomatic Valves
COMPOSITE BREAK-OFF PLUG - Threaded ⅜" to install into valve. When broken off, riser pipe drains. For reference use only. Please check Flomatic's website for the latest valve product specifications. [See More]
- Features: Threaded
- Straight Thread: 2 1/2 - 8 inch (65 mm - 200 mm)
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: 1/4" NPT
- Features: Threaded; Knurled
- Fitted Depth: 0.7200
from Daemar Inc.
Designed for protection of 37 Deg. flared fittings and straight-threaded ports, Series ASP Plug has a nose section that seals on flared fittings without a gasket. The ASP-GN has an added neoprene shoulder gasket for low-pressure sealing of threaded ports. Special gaskets are also available in Butyl... [See More]
- Features: Threaded
- Material: Aluminum
from Remke Industries
Dome Cap Cable Glands provide easy handling, quick installation, impact & abrasion resistance even at very low temperatures. These connectors are designed to withstand the rigors of continuous flexing & bending with ease and can be used with a wide range of cables both indoors &... [See More]
- Shape / Application: Round
- Material: Steel - Stainless
- Features: Threaded; Vented
from Polymer Molding, Inc.
The PR Series Pull-Ring Plugs offer product protection with easy removal. The tapered style polyethylene plugs have built-in lift rings for easy installation and removal resulting in reduced product damage and increased cost savings. Ring design lays flat resulting in more efficient packaging. All... [See More]
- Shape / Application: Round
- NPT Thread: 1/4" NPT
- Features: Threaded; Tapered; Flange; Pull Tab
- Diameter: 0.4500
from Essentra Components
Metal Rectangular Inserts have a zinc-plated steel-threaded insert to accommodate adjustable leveling mounts and feet. Horizontal ribbing allows for built-in flexibility to fit multiple tube gauges and a secure fit. [See More]
- Shape / Application: Rectangular
- Material: Polyethylene (PE); High Density Polyethylene with Zinc-plated Steel Nut
- Features: Threaded
from Oil-Rite Corp.
Vent Plugs with Filters and Check Valves can be used to relieve pressure or vacuum on bearing housings, gear boxes, reservoirs, or any application where venting is necessary. Vent plugs assure pressure equalization and minimize undesirable problems, such as bearing seal blowout due to excessive... [See More]
- Features: Threaded; Vented
- Material: Aluminum
- NPT Thread: 1/4" NPT
from Appleton Electric
THREADED TYPE. CAST IRON MATERIAL. THREADED METAL CONDUIT USED ON. UL APPROVAL. CLASS I GROUP A B C D, CLASS II GROUP E F G, CLASS III ENCLOSURE. 5 INCH TRADE SIZE. BAR HEAD STYLE. UNILET[R] BRAND. APPLICABLE STANDARD NEC 501-4A/501-4B. PLG MODEL [See More]
- Features: Threaded
- Material: Iron
from IDEX Health & Science
Our Tefzel (ETFE) Plugs are specifically used to close off unused ports in valves and multi-port connectors. It is for M6 Flat-Bottom port configuration. It comes in black and natural color. [See More]
- Shape / Application: Round
- Material: Genuine Tefzel™ ETFE Resin
- Features: Threaded; Knurled
from NBK America LLC
Because an O-ring is included, grooving is not required on the surface surrounding the female screw. Because this is a parallel thread, strain on the female screw like a tightened taper thread does not occur. It is suitable for oil hydraulic equipment / pneumatic devices that are often mounted and... [See More]
- Shape / Application: Round
- Straight Thread: M10
- Features: Threaded; Flange
- Fitted Depth: 0.3150
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: 1/4" NPT
- Features: Threaded; Knurled
- Fitted Depth: 0.7200
from Daemar Inc.
Series BSP Plugs provide positive protective sealing on ports threaded for British Standard Pipe fittings. A unique flange compression seal prevents leakage of residual fluid. Designed for easy finger installation, a 12-point head enables socket or wrench tightening for a positive seal. Material:... [See More]
- Features: Threaded
from Polymer Molding, Inc.
The tapered style can either be used as a cap or plug, depending on application. Excellent for protecting threads and keeping unwanted contamination out of pipes, valves, tubing and most other cylindrical openings. The most economical solution for protecting standard size threads, unified threads,... [See More]
- Shape / Application: Round
- Straight Thread: 7/16" Standard Threaded
- Features: Threaded; Tapered; Flange
- Diameter: 0.3570
from Essentra Components
Round Threaded Inserts & Glides have a metal threaded insert to accommodate adjustable leveling mounts and feet. Various push-fit styles are available for light, medium, and heavy duty applications. [See More]
- Shape / Application: Round
- Material: Polyethylene (PE); High Density Polyethylene
- Features: Threaded
from Oil-Rite Corp.
Vent Plugs with Filters and Deflectors can be used to relieve pressure or vacuum on bearing housing, gear boxes, reservoirs, or any application where venting is necessary. These vent plugs assure pressure equalization and minimize undesirable problems, such as bearing seal blowout due to excessive... [See More]
- Features: Threaded; Vented
- Material: Steel
- NPT Thread: 1/2" NPT
from NBK America LLC
For applications such as compression spring holders and oil injection opening covers. [See More]
- Features: Threaded
- Fitted Depth: 0.3937
- Straight Thread: M12
- Material: Steel - Stainless; S45C (Hardness: 34 - 43 HRC) Ferrosoferric Oxide Film (Black)
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Round; Screw Cap or Plug
- NPT Thread: 1/4" NPT
- Features: Threaded; Slotted Head; Recessed Socket
- Fitted Depth: 0.5000
from Daemar Inc.
Originally these plugs were engineered for use in aircraft and hydraulic equipment. They provide protection against contaminants while protecting delicate threads. The rolled thread design allows them to be threaded in or simply pushed in. These threads were also designed to conform to UN and UNS... [See More]
- Features: Threaded
from Essentra Components
Round Threaded Inserts & Glides have a metal threaded insert to accommodate adjustable leveling mounts and feet. Various push-fit styles are available for light, medium, and heavy duty applications. [See More]
- Shape / Application: Round
- Material: Nylon; Glass Filled Nylon;Brass insert
- Features: Threaded
from Oil-Rite Corp.
Vent Plugs with Filters can be used to relieve pressure or vacuum on bearing housings, gear boxes, reservoirs, or any application where venting is necessary. These vent plugs assure pressure equalization and minimize undesirable problems, such as bearing seal blowout due to excessive pressure. The... [See More]
- Features: Threaded; Vented
- Material: Steel
- NPT Thread: 1/2" NPT
from NBK America LLC
Sinking type Pipe Taper Screw Plugs. SFT-PS and SFTS-PS are precoated seal types which do not require sealing tape or sealant. This dramatically reduces work time. The sealing effect is also excellent. Precoated seals have excellent resistance to oil, gasoline, water, and heat. [See More]
- Shape / Application: Round
- BSP Thread: R1/16
- Features: Threaded; Tapered
- Fitted Depth: 0.2362
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: 1/8" NPT
- Features: Threaded; Knurled
- Fitted Depth: 0.5800
from Daemar Inc.
Series MSP Plugs feature two concentric, raised rings on the underside of the flange to provide positive sealing around metric-threaded ports. A cross-slotted head makes it easy to tighten with a screwdriver. Material: High-Density Polyethylene Colour*: Green [See More]
- Features: Threaded
from Essentra Components
Round Threaded Inserts & Glides have a metal threaded insert to accommodate adjustable leveling mounts and feet. Various push-fit styles are available for light, medium, and heavy duty applications. [See More]
- Shape / Application: Round
- Material: Polyethylene (PE); High Density Polyethylene
- Features: Threaded
from NBK America LLC
Sinking type Pipe Taper Screw Plugs. SFT-PS and SFTS-PS are precoated seal types which do not require sealing tape or sealant. This dramatically reduces work time. The sealing effect is also excellent. Precoated seals have excellent resistance to oil, gasoline, water, and heat. [See More]
- Shape / Application: Round
- BSP Thread: R1/16
- Features: Threaded; Tapered
- Fitted Depth: 0.2362
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Screw Cap or Plug
- NPT Thread: 1/8" NPT
- Features: Threaded; Knurled
- Fitted Depth: 0.5800
from Daemar Inc.
Series P Pipe Plugs are available in three styles: square head, round head and recessed socket. They are molded in high density polyethylene and are ideal for keeping moisture, dirt and other contaminants from NPT-threaded ports. Material: High-Density Polyethylene Colour*: Red Applicable Specs:... [See More]
- Features: Threaded
- NPT Thread: 1 1/4" NPT
from Essentra Components
Round Threaded Inserts & Glides have a metal threaded insert to accommodate adjustable leveling mounts and feet. Various push-fit styles are available for light, medium, and heavy duty applications. [See More]
- Shape / Application: Round
- Material: Steel
- Features: Threaded
from NBK America LLC
Sinking type Pipe Taper Screw Plugs. SFT-PS and SFTS-PS are precoated seal types which do not require sealing tape or sealant. This dramatically reduces work time. The sealing effect is also excellent. Precoated seals have excellent resistance to oil, gasoline, water, and heat. [See More]
- Shape / Application: Round
- BSP Thread: R1/16
- Features: Threaded; Tapered
- Fitted Depth: 0.2362
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Round; Screw Cap or Plug
- NPT Thread: 1/8" NPT
- Features: Threaded; Slotted Head; Recessed Socket
- Fitted Depth: 0.3900
from Daemar Inc.
Series PD Plugs, designed for use on flared JIC fittings, are knurled for ease of application. They will seal low pressure requirements with light finger tightening. PD Plugs can be used to seal 37 º flare fittings without gaskets. Material: High-Density Polyethylene Colour*: Red Applicable... [See More]
- Features: Threaded
from Essentra Components
Square Metal Threaded Inserts & Glides have a metal threaded insert to accommodate adjustable leveling mounts and feet. Various push-fit styles are available for light, medium, and heavy duty applications. [See More]
- Shape / Application: Square
- Material: Polyethylene (PE); High Density Polyethylene
- Features: Threaded
from NBK America LLC
Sinking type Pipe Taper Screw Plugs. SFT-PS and SFTS-PS are precoated seal types which do not require sealing tape or sealant. This dramatically reduces work time. The sealing effect is also excellent. Precoated seals have excellent resistance to oil, gasoline, water, and heat. [See More]
- Shape / Application: Round
- BSP Thread: R1/16
- Features: Threaded; Tapered
- Fitted Depth: 0.2362
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Screw Cap or Plug
- Straight Thread: 10-32 UNF
- Features: Threaded; Knurled
- Fitted Depth: 0.2750
from Daemar Inc.
Knurled for ease of application, Series PDE Plugs are designed to fit MS-21921 tube and nut assemblies interchangeably. They can be installed with light finger tightening to seal beyond normal requirements.Material: Low-Density PolyethyleneColour*: Red [See More]
- Features: Threaded
from Essentra Components
Square Metal Threaded Inserts & Glides have a metal threaded insert to accommodate adjustable leveling mounts and feet. Various push-fit styles are available for light, medium, and heavy duty applications. [See More]
- Shape / Application: Square
- Material: Nylon; Glass Filled Nylon
- Features: Threaded
from NBK America LLC
Because an O-ring is included, grooving is not required on the surface surrounding the female screw. Because this is a parallel thread, strain on the female screw like a tightened taper thread does not occur. It is suitable for oil hydraulic equipment / pneumatic devices that are often mounted and... [See More]
- Shape / Application: Round
- BSP Thread: G1/8
- Features: Threaded; Tapered; Flange
- Fitted Depth: 0.3150
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Screw Cap or Plug
- Straight Thread: 10-32 UNF
- Features: Threaded; Knurled
- Fitted Depth: 0.2750
from Daemar Inc.
Series PDF Plugs are designed for easy mechanical or hand installation on flat-faced O-ring fittings. Material: Low-Density Polyethylene Colour*: Red [See More]
- Features: Threaded
from Essentra Components
Square Metal Threaded Inserts & Glides have a metal threaded insert to accommodate adjustable leveling mounts and feet. Various push-fit styles are available for light, medium, and heavy duty applications. [See More]
- Shape / Application: Square
- Material: Nylon; Nylon
- Features: Threaded
from NBK America LLC
PEEK is a thermoplastic super-engineering plastic with excellent physical and chemical properties. These screws have excellent chemical resistance. They are mostly unaffected by chemicals excluding concentrate sulfuric acid, concentrate nitric acid, and concentrate hydrofluoric acid. These screws... [See More]
- Features: Threaded; Tapered
- Fitted Depth: 0.3150
- BSP Thread: R1/8
- Material: Polyetheretherketon (PEEK); PEEK/Light Brown
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Round; Screw Cap or Plug
- NPT Thread: 3/4" NPT
- Features: Threaded; Slotted Head; Recessed Socket
- Fitted Depth: 0.6100
from Daemar Inc.
Series PDH plugs are designed for flat-faced O-ring hydraulic fittings and can be easily installed and removed with an allen wrench. Series PDH offers a universal design with standard thread pitches and seal flush against an O-ring. Material: High-Density Polyethylene Colour: Red [See More]
- Features: Threaded
from Essentra Components
Square Metal Threaded Inserts & Glides have a metal threaded insert to accommodate adjustable leveling mounts and feet. Various push-fit styles are available for light, medium, and heavy duty applications. [See More]
- Shape / Application: Square
- Material: Steel
- Features: Threaded
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Round; Screw Cap or Plug
- NPT Thread: 3/8" NPT
- Features: Threaded; Slotted Head; Recessed Socket
- Fitted Depth: 0.5500
from Daemar Inc.
Series PDI Plugs are made for use on inverted flared fittings. Knurled for ease of application, they will seal with light finger tightening. Series PDI Plugs will seal boss type fittings without gaskets. Material: Low-Density Polyethylene Colour*: Red [See More]
- Features: Threaded
from Essentra Components
Threaded O-Ring Plugs are equipped with a compressing flange lip and O-ring for a watertight seal and superior leakage protection for NPT threads. The unique head design allows easy application and removal with a 12 point socket head, screwdriver, or wrench. [See More]
- Features: Threaded
- Material: Polyethylene (PE); High Density Polyethylene
from ARKPLAS
Our Commercial Grade Fittings are molded for ease of use in application. No special tools or ferrules are required for fitting insertion. Ark-Plas ® Commercial Grade Fittings fit the need when a low cost, high performance fitting is required that is both cost efficient and reliable. With high... [See More]
- Shape / Application: Round; Screw Cap or Plug
- Straight Thread: 3/8-24 UNF
- Features: Threaded; Knurled
- Fitted Depth: 0.5800
from Daemar Inc.
Series PDO Plugs provide positive sealing for SAE straight-threaded O-ring type ports and MIL-MS-33649 bosses on fluid power components. Integral O-ring type bead seats in the bevel of the port to prevent oil leakage or entrance of contaminants. Seal at outside of knurl protects port face against... [See More]
- Features: Threaded
from Essentra Components
Threaded O-Ring Plugs are equipped with a compressing flange lip and O-ring for a watertight seal and superior leakage protection for NPT threads. The unique head design allows easy application and removal with a 12 point socket head, screwdriver, or wrench. [See More]
- Features: Threaded
- Material: Nylon; Glass Filled Nylon
from ARKPLAS
All Ark-Plas ® Luer Fittings feature conical tapers molded to ISO 594-1, and ISO 594-2 Standards for 6% Luer tapers. This helps to ensure compatibility with all other luers molded to the same high standard. With locking or non-locking characteristics, Luer Fittings can be used in most any... [See More]
- Shape / Application: Round; Luer Plug
- Fitted Depth: 0.3600
- Features: Threaded; Tapered; Knurled
- Overall Length: 0.3600
from Daemar Inc.
Originated for automotive and air conditioning tube fittings, Series RP is a general purpose, high strength, machine threaded plug adaptable to a multitude of applications. Serrated for finger tightening, they also have a slotted hex head for screw driver, nutdriver or wrench installation where... [See More]
- Features: Threaded
from Essentra Components
Threaded O-Ring Plugs fit NS and NF Class 1-2-3 standard threads. The O-ring provides a watertight seal and superior leakage protection. Can be applied and removed by hand, hex wrench, or screwdriver. [See More]
- Features: Threaded
- Material: Polyethylene (PE); Low Density Polyethylene
from ARKPLAS
All Ark-Plas ® Luer Fittings feature conical tapers molded to ISO 594-1, and ISO 594-2 Standards for 6% Luer tapers. This helps to ensure compatibility with all other luers molded to the same high standard. With locking or non-locking characteristics, Luer Fittings can be used in most any... [See More]
- Shape / Application: Round; Locking Luer Plug
- Fitted Depth: 0.3050
- Features: Threaded; Knurled
- Overall Length: 0.3050
from Daemar Inc.
Series RPO Plugs provide a positive seal on SAE straight- threaded ports. Integral O-ring type bead seats into bevel of threaded opening to prevent oil or fluid leakage. A lip on the flange compresses against the surface to keep contaminants from the spot face. Slotted, 12-point head for... [See More]
- Features: Threaded