Table Lift / Positioner Lifts
from RS Components, Ltd.
TABLE ELEVATRICE HYDRAULIQUE - CAPACITE [See More]
- Type: Table
- Width: 20
- Capacity: 3308
- Length: 40
from Advance Lifts, Inc.
These units are designed to operate on shop air with no need for electricity. Each model has been optimized for minimum weight and maximum value. SPECIAL FEATURES. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. These units are fully... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 15000
- Width: 36 to 48
from Isotech, Inc.
Lift & Tilt System: Standard. Load capacity [kg] - 160. Min install height [mm] - 116. Lifting height [mm] - 400. Max tilting angle [ °] - 30. Weight [kg] - 29 [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 353 to 441
from RS Components, Ltd.
LEVE-RADIATEUR [See More]
- Type: Table
- Width: 27
- Capacity: 331
- Length: 54
from Advance Lifts, Inc.
The air spring actuated lift tables offer several advantages and disadvantages when compared to hydraulic cylinder actuated lifts. The chief advantages of air spring tables are lower cost, there are no hydraulic systems to leak, and no electrical requirements for operation.They are simply hooked up... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1000
- Width: 24 to 48
from Isotech, Inc.
The A-series lifting column is a square high-performance model which is suitable for a broad range of applications where a very robust and small column is needed. Our A-series columns are developed for stable performances, both with heavy centric and offset loads. The A56, A46, A45 and A35 models... [See More]
- Type: Table
- Lift Travel: 118
- Capacity: 2698
- Mechanism: Telescoping
from RS Components, Ltd.
BERCEAU P/ LEVE-CHAUFFE-EAU 263620 [See More]
- Type: Table
- Width: 26
- Capacity: 331
- Mechanism: Manual
from Advance Lifts, Inc.
The air spring actuated lift tables offer several advantages and disadvantages when compared to hydraulic cylinder actuated lifts. The chief advantages of air spring tables are lower cost, there are no hydraulic systems to leak, and no electrical requirements for operation.They are simply hooked up... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2000
- Width: 24 to 48
from Isotech, Inc.
Our B-series lifting columns has a rectangular shape which works great in applications with heavy loads. The B-series is developed for demanding applications with both centric and offset loads. It is available as 2- or 3-section columns. Both the 2-section B23 lifting columns and the 3-section B13... [See More]
- Type: Table
- Lift Travel: 118
- Capacity: 2698
- Mechanism: Telescoping
from RS Components, Ltd.
ADAPT P/RADIATEUR P/LEV-CHAUF-EAU 263620 [See More]
- Type: Table
- Width: 26
- Capacity: 331
- Mechanism: Manual
from Advance Lifts, Inc.
The air spring actuated lift tables offer several advantages and disadvantages when compared to hydraulic cylinder actuated lifts. The chief advantages of air spring tables are lower cost, there are no hydraulic systems to leak, and no electrical requirements for operation.They are simply hooked up... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2000
- Width: 48 to 72
from Isotech, Inc.
The E-series is the light version series among the rectangular lifting columns. It is our smallest rectangular column with dimensions of 134 ×103 mm. E-series is designed for applications that needs a highly efficient and small lifting column to lift lighter loads. It is recommended for... [See More]
- Type: Table
- Lift Travel: 28
- Capacity: 562
- Mechanism: Telescoping
from RS Components, Ltd.
Double scissorlift table,1010x520mm [See More]
- Type: Table
- Width: 20
- Capacity: 1544
- Length: 40
from Advance Lifts, Inc.
The carousel and order picking lifts evolved from standard units to specialized units designed for order picking operations. Their chief features include handrail and gate configurations on three (3) sides and in some instances they have modified platform outlines. The units below are the most... [See More]
- Type: Table
- Lift Travel: 60
- Capacity: 2000
- Width: 48
from Isotech, Inc.
The F-series lifting column consists of asymmetric tubes with a softer design in comparison to the traditional lifting columns. F-series are available as 2- and 3-section columns. With the small size and asymmetric shape, the F-series lifting columns suits applications that needs a compact lifting... [See More]
- Type: Table
- Lift Travel: 31
- Capacity: 562
- Mechanism: Telescoping
from RS Components, Ltd.
Single scissorlift table,830x500mm 250kg [See More]
- Type: Table
- Width: 20
- Capacity: 551
- Length: 33
from Advance Lifts, Inc.
The HD-Series lifts were designed for the higher capacity applications beyond the scope of the P-Series units. SPECIAL FEATURES. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. All of the controllers are Underwriter Laboratory listed... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 16000
- Width: 30 to 54
from Isotech, Inc.
Our G-series is a small rectangular lifting column. It is developed for applications that needs a small and robust lifting solution to lift centric or offset loads. G-series are available as 2- or 3-section columns. With its stability and compact design, the G-series lifting columns are used in... [See More]
- Type: Table
- Lift Travel: 39
- Capacity: 674
- Mechanism: Telescoping
from Advance Lifts, Inc.
The P-Series lifts are our most popular series as they fit a wide array of manufacturing applications. Double long units offer longer platform sizes. Features: These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. All of the controllers are... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 12000
- Width: 24 to 48
from Isotech, Inc.
The X-series is our extreme series with the most robust lifting columns in the whole industry. X-series lifting columns are developed to manage a very safe and reliable run with extreme offset loads. Combined with our patented drive, X-series columns has a capacity of lifting loads up to 600 kg at 1... [See More]
- Type: Table
- Lift Travel: 118
- Capacity: 2698
- Mechanism: Telescoping
from Advance Lifts, Inc.
The P-Series lifts are our most popular series as they fit a wide array of manufacturing applications. Double long units offer longer platform sizes. Features. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. All of the controllers are... [See More]
- Type: Table
- Lift Travel: 48
- Capacity: 12000
- Width: 24 to 48
from Advance Lifts, Inc.
The SD-Series lifts were designed as a step up from the HD series. Many of these models are modified dock lifts so you will notice that the edge loading capabilities are often a higher percentage of the lifting capacity than is typical for smaller lifts. SPECIAL FEATURES. All of the controllers are... [See More]
- Type: Table
- Lift Travel: 58
- Capacity: 10000
- Width: 48
from Advance Lifts, Inc.
The JSL series units are a sampling of some of the very large special lifts that we have produced. If you have a very large lift requirement that does not match up with one of our Jumbo units, please call us and we will be pleased to quote on your exact requirements. SPECIAL FEATURES. All of the... [See More]
- Type: Table
- Lift Travel: 87
- Capacity: 20000
- Width: 102
from Advance Lifts, Inc.
The HD-Series lifts were designed for the higher capacity applications beyond the scope of the P-Series units. SPECIAL FEATURES. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. All of the controllers are Underwriter Laboratory listed... [See More]
- Type: Table
- Lift Travel: 22
- Capacity: 12800
- Width: 60 to 84
from Advance Lifts, Inc.
The P-Series lifts are our most popular series as they fit a wide array of manufacturing applications. Double wide units offer wider platform widths. SPECIAL FEATURES. ■ These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. ■ All of... [See More]
- Type: Table
- Lift Travel: 22
- Capacity: 4000
- Width: 48 to 72
from Advance Lifts, Inc.
These lifts are designed to move work objects to convenient working heights. Since there are no hydraulics, installation is simply lagging the lift in place and plugging it into an outlet. [See More]
- Type: Table
- Lift Travel: 18
- Capacity: 100
- Width: 48
from Advance Lifts, Inc.
The Advantage series is an Allied line of value minded lift tables. This line includes a number of lifts that are perfect for the infrequent raising, lowering, or moving of product. This line includes a number of foot pump tables to choose from. SPECIAL FEATURES. Used to raise, lower, position and... [See More]
- Type: Table
- Lift Travel: 41
- Capacity: 1500
- Width: 24
from Advance Lifts, Inc.
The HD-Series lifts were designed for the higher capacity applications beyond the scope of the P-Series units. SPECIAL FEATURES. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. All of the controllers are Underwriter Laboratory listed... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 8000
- Width: 30 to 54
from Advance Lifts, Inc.
These lifts were designed for automated machine feeding or off loading applications that will accumulate cycles very quickly. Standard lift speeds start out twice as fast as our P series units and can be modified to customer needs approaching the 40 feet per minute speed of our UHC lifts. This high... [See More]
- Type: Table
- Lift Travel: 18
- Capacity: 2500
- Width: 36 to 48
from Advance Lifts, Inc.
These units are designed to operate on shop air with no need for electricity. Each model has been optimized for minimum weight and maximum value. SPECIAL FEATURES. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. These units are fully... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1500
- Width: 30 to 48
from Advance Lifts, Inc.
These lift and tilt units are optimized combination designs that are used where the lifting and tilting functions must be done independently. SPECIAL FEATURES. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. These units are equipped with... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2000
- Width: 30 to 48
from Advance Lifts, Inc.
These units are optimized lift and turn units used where the lifting and turning functions must be done independently. SPECIAL FEATURES. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. These units are equipped with single internally... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2000
- Width: 24 to 48
from Advance Lifts, Inc.
The P-Series lifts are our most popular series as they fit a wide array of manufacturing applications. SPECIAL FEATURES. These units are equipped with the patented "Platform Centering Devices", which doubles or triples lift life. All of the controllers are Underwriter Laboratory listed assemblies. [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2500
- Width: 24 to 48
from Advance Lifts, Inc.
The SD-Series lifts were designed as a step up from the HD series. Many of these models are modified dock lifts so you will notice that the edge loading capabilities are often a higher percentage of the lifting capacity than is typical for smaller lifts. Features: All of the controllers are... [See More]
- Type: Table
- Lift Travel: 58
- Capacity: 5000
- Width: 72
from Parker Hannifin / Automation / Electromechanical Division - Europe
Parker ’s ZP200 Vertical Lift Platform offers precise vertical translation for elevating small or large payloads (up to 76 kg). A unique wedge design converts horizontal motion, generated by a ball-screw drive, into true vertical elevation of the platform. A rugged bearing design provides... [See More]
- Type: Table
- Width: 8
- Capacity: 33 to 165
- Length: 8
from Econo Lift Limited
Platform Sizes. 24 ” wide x 36 ” long to 72 ” wide x 72 ” long. Base sizes. Standard 24 ”,36 ”,48 ” wide x 36 ”,48 ” long travel. 48 ”, 72 ” vertical travel. Lowered heights. 12 ”, 18 ”. Safety. Velocity fuse is standard... [See More]
- Type: Table
- Lift Travel: 30
- Capacity: 500
- Width: 12
from PowerMate - L P International Inc.
PowerMate ® Electric Powered LiftTable Model #LT-1. Solid State Pulse Width Modulation (PWM) Advanced Microprocessor Based Control - Utilizes State-of-the-Art Mosfet Motor Drive Technology. Fully Automatic Braking System. Override Clutch. Extruded Aluminum and Steel Construction. Lifting... [See More]
- Type: Table
- Actuation: Motor
- Mechanism: Screw
- Tires: Solid
from Raymond Handling Consultants, L.C.
SCISSOR LIFT TABLE [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 2000
from Omtec Corporation
Flip a switch... Omtec PBT Ball Transfers raise, allowing minimal effort movement, orientation and positioning of items on ergonomic scissor lifts. Flip the switch again... Omtec PBT Ball Transfers retract, solidly and firmly positioning items in a stable location while the ergonomic scissor lift is... [See More]
- Type: Table
- Actuation: Hand; Foot
- Mechanism: Scissor
from David Round
The Ruger Stainless Steel Full Power Lift Table is ideal for loading and unloading or any other application that requires controlled lifting in a cleanroom environment. They are designed for ease of operation and easy clean up. [See More]
- Type: Table
- Mechanism: Telescoping
- Capacity: 2000
- Actuation: Hydraulic
from Titan Worldwide
Standard 1 HP power pack c/w hand control [See More]
- Type: Table
- Lift Travel: 48
- Capacity: 1000
- Width: 24
from Lift-Tables.net
Southworth Products Corp is the world's largest manufacturer of ergonomic material handling equipment and container handling equipment for vertical lifting and work positioning, designed to improve worker productivity while reducing the potential for workplace injuries. Southworth's lines of... [See More]
- Type: Table
- Lift Travel: 30
- Capacity: 500 to 1000
- Width: 24
from C & C Lift Truck, Inc.
For fast and efficient lifting, transporting and positioning of material. Long-lasting hydraulic pump is foot activated. Hydraulic center post lifts tabletop with rigidity. 300 lb. cap. unit has one guide post, 1,000 lb. cap. unit has 2 guide posts. Four guide posts for the other units. Rolls... [See More]
- Type: Table
- Capacity: 200
from Autoquip Corporation
ABS Air Bag Lift – Versatile & Durable Pneumatic Scissors Tables for Work Positioning and Conveyor Systems. Autoquip Air Bag Pneumatic lifts are driven by direct acting heavy industrial air bag actuators, and because they're completely air powered, not susceptible to the oil leaks or... [See More]
- Type: Table
- Lift Travel: 5
- Capacity: 2000
- Width: 24 to 48
from Positech Corporation
The Conco ® Balance Master, a manipulator arm, exhibits unique versatility in handling a wide variety of different applications. This pneumatic manipulator arm provides for exact positioning due to free, almost effortless horizontal and vertical movement, constant support and positive control at... [See More]
- Type: Manipulator; Table
- Lift Travel: 65
- Capacity: 1100
- Mechanism: Articulated
from Superlift Material Handling Inc.
Superlift Material Handling offers ergonomic material handling equipment including lift tables, lift carts, upenders, electric carts, stackers, pallet trucks, skid lifters, work positioners, and custom designed equipment. We have products to lift, tilt, rotate, upend, move, extend or lower your... [See More]
- Type: Table
- Actuation: Hydraulic
- Mechanism: Scissor
from Lift Products, Inc.
The Guardian E-Lift Tables have all the safety features of our Low Profile Guardian Series Lift Tables. The low profile feature provides greater flexability for tall pallet applications and operator height differences. The E-Lift, available with a 2,200 lbs capacity, is designed for use with open... [See More]
- Type: Table
- Mechanism: Scissor
from AeroGo, Inc.
Move heavy loads safely and ergonomically on an AeroGo air caster scissor lift table. AeroGo ’s scissor lift tables provide precise positioning with a scissor lift table ’s vertical adjustability. Move and position heavy loads to work cells. Ideally suited for assembling, tooling or... [See More]
- Type: Table
- Actuation: Air
from Weber UK, Ltd.
Provides and ergonomically correct working height and lifting position. Foot pedal raises lifter. Fitted with 2 fixed wheels and 2 castors with brakes. Robust and easy to operate. [See More]
- Type: Table
- Actuation: Foot
- Capacity: 331
from Electro Kinetic Technologies
The PONY EXPRESS Motorized Electric Lift Platform Cart is battery operated with an electric lift platform to bring materials to an ergonomic height for loading or unloading. MODEL 1050-EL. • Electric lift. • Front wheel transaxle drive system. • Non-marking tires. • Variable... [See More]
- Type: Table
- Lift Travel: 46
- Capacity: 1000
- Width: 23
from Southworth Products Corp.
This 2,000 pound capacity hydrauli lift table is built for years of trouble free service. Like all of our LS Hydraulic Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising and lowering. Fully adjustable down... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 2000
from RDM Industrial Products, Inc.
Ergonomic Table Height Adjustability (Options). Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank. Switch for Electric Motor Unit can be positioned anywhere on the unit... Hand Crank is mounted on Side of Unit. Manually-Adjusted Height Option w/ Leg Pins. Standard Sizes: We are... [See More]
- Type: Table; Lift Platform
- Lift Travel: 12
- Capacity: 20000
- Mechanism: Screw (optional feature); Telescoping (optional feature)
from Unidex, Inc.
The PHL Series Workstation is versatile enough for transferring loads high or low in hundreds of applications. The work surface is elevated by means of foot pedal hydraulics. With its cantilevered design, the area between the legs and table/forks is unobstructed, for easy accessibility to racks,... [See More]
- Type: Table
- Lift Travel: 48
- Capacity: 250
- Width: 36
from Econo Lift Limited
Travel. 30 ”, 38 ”. Safety. •Velocity fuse on each cylinder to eliminate tables from collapsing due to hose failure. Hold down tabs on all four corners. Lowered Height of Table. Floor level. Power supplies. A/C 115 volt, 1H.P. (standard). Single phase motor (hand or foot operated... [See More]
- Type: Table
- Lift Travel: 30
- Capacity: 1000
- Width: 44
from Raymond Handling Consultants, L.C.
FLOOR LEVEL LIFT TABLE [See More]
- Type: Table
- Capacity: 2000
from Omtec Corporation
Flip a switch... Omtec PBT Ball Transfers raise, allowing minimal effort movement, orientation and positioning of items on ergonomic scissor lifts. Flip the switch again... Omtec PBT Ball Transfers retract, solidly and firmly positioning items in a stable location while the ergonomic scissor lift is... [See More]
- Type: Table
- Actuation: Hand; Foot
- Mechanism: Scissor
- Features: Tilting
from David Round
Ruger Stainless Steel Lift Tables are specifically designed for use in controlled environments found in pharmaceutical, food handling and electronics industries. These carefully designed Lift Tables meet or exceed cleanroom requirements. [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 500 to 4000
- Actuation: Hydraulic
from Titan Worldwide
Standard power pack c/w hand control [See More]
- Type: Table
- Lift Travel: 32
- Capacity: 2000
- Width: 44
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 36
- Capacity: 500 to 2000
- Width: 30
from Autoquip Corporation
AFB Pneumatic Air Bag Lift – Durable, Low Precision, Low Cost, Portable Scissors Tables for Work Positioning, Ergonomics, and Worker Productivity. Autoquip's AFB family of Air Force Lifts are completely air powered, driven by heavy industrial pneumatic air bag actuators - which eliminate the... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2500
- Width: 36 to 48
from Positech Corporation
The Conco ® Balance Master, a manipulator arm, exhibits unique versatility in handling a wide variety of different applications. This pneumatic manipulator arm provides for exact positioning due to free, almost effortless horizontal and vertical movement, constant support and positive control at... [See More]
- Type: Manipulator; Table
- Lift Travel: 37
- Capacity: 225
- Mechanism: Articulated
from Superlift Material Handling Inc.
Superlift Material Handling offers ergonomic material handling equipment including lift tables, lift carts, upenders, electric carts, stackers, pallet trucks, skid lifters, work positioners, and custom designed equipment. We have products to lift, tilt, rotate, upend, move, extend or lower your... [See More]
- Type: Table
- Mechanism: Scissor
from Lift Products, Inc.
The G-Series Lift Tables have been designed as an economical solution for light duty applications. Available with 2,000 & 3,000 lb. capacities, The G-Series table can improve productivity and reduce injuries by placing loads at an ergonomic work height. The heavy duty 1.7 HP lift motor allows up... [See More]
- Type: Table
from AeroGo, Inc.
High Lift Load Modules, also referred to as Auxiliary Lift, provide additional stroke to raise tooling above existing wheeled casters. This system allows long distance moves on existing wheels, and precise, easy movement when Aero-Casters are engaged, using shop air. A safe and effective method for... [See More]
- Type: Table
- Actuation: Air
from Weber UK, Ltd.
Provides and ergonomically correct working height and lifting position. Foot pedal raises lifter. Fitted with 2 fixed wheels and 2 castors with brakes. Robust and easy to operate. [See More]
- Type: Table
- Actuation: Foot
- Capacity: 662
from Electro Kinetic Technologies
The 1050-HL PONY EXPRESS Motorized Hydraulic Lift Platform Cart is battery operated with a manual lift platform to bring materials to an ergonomic height for loading or unloading. The cart features a foot pump which easily raises the platform and a control for repositioning and lowering. MODEL... [See More]
- Type: Table
- Lift Travel: 27
- Capacity: 1000
- Width: 23
from Southworth Products Corp.
This 2,000 pound capacity lift table features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 2000
from RDM Industrial Products, Inc.
Ergonomic Table Height Adjustability. High Weight Capacity. Durable Fully-Welded Tubular Steel Frame. Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD /. Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel. Optional Workstation Accessories... [See More]
- Type: Table
- Lift Travel: 12
- Capacity: 20000
- Mechanism: Screw (optional feature); Telescoping (optional feature)
from Unidex, Inc.
The basic PH Series table can be configured with many special features and options to meet specific requirements including cleanroom and other electrostatic-free operation, or as part of lean manufacturing assembly systems. Stainless steel models are available for sanitary or corrosive environments... [See More]
- Type: Table
- Lift Travel: 16
- Capacity: 500
- Width: 24
from Econo Lift Limited
Travel. 30 ”, 38 ”. Tilt angle. 0-45 °. Safety. Velocity fuse on each cylinder to eliminate tables from collapsing due to hose failure. Hold down tabs on all four corners. Lowered Height of Table. Floor level. Power supplies. A/C 110 volt. Single phase motor. (hand or foot controls. [See More]
- Type: Table
- Lift Travel: 30
- Capacity: 1000
- Width: 50
from Raymond Handling Consultants, L.C.
ADJUSTABLE SHEET AND PANEL TRUCK [See More]
- Type: Table
- Capacity: 2000
from David Round
Ruger Stainless Steel Ride On Lift Tables are designed to safely and efficiently handle large loads. With Ride On convenience these Lift Tables feature an ergonomic design that maximizes productivity by eliminating strain and fatigue. [See More]
- Type: Table
- Width: 37
- Capacity: 2000
- Mechanism: Telescoping
from Titan Worldwide
Power packs c/w standard hand control [See More]
- Type: Table
- Lift Travel: 59
- Capacity: 12000
- Width: 72
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 36 to 48
- Capacity: 2000 to 6000
- Width: 48
from Autoquip Corporation
Air Cargo Container Lift – Premium High Capacity Dock Lift with Conveyor for Safe Transfer of Cargo between Trucks and Dock. Because of its premium features and ability to provide up to five times the number of cycles as competing brands, the Air Cargo Scissors Lift has become the standard for... [See More]
- Type: Table
- Lift Travel: 49
- Capacity: 15000
- Width: 108
from Positech Corporation
The Conco ® Balance Master, a manipulator arm, exhibits unique versatility in handling a wide variety of different applications. This pneumatic manipulator arm provides for exact positioning due to free, almost effortless horizontal and vertical movement, constant support and positive control at... [See More]
- Type: Manipulator; Table
- Lift Travel: 90
- Capacity: 240
- Mechanism: Articulated
from Superlift Material Handling Inc.
Heavy Duty all welded frames. DU bushings. Low collapsed height. 1 year warranty [See More]
- Type: Table
- Width: 48
- Capacity: 2000 to 4000
- Length: 24
from Lift Products, Inc.
The Guardian Series represents the ultimate in lift table safety with features that are optional or not available on other lift tables. Guardian Series lift tables are designed as a work station to provide improved ergonomic conditions to ensure the health, safety and comfort of the operator... [See More]
- Type: Table
- Mechanism: Scissor
from Weber UK, Ltd.
Provides and ergonomically correct working height and lifting position. Foot pedal raises lifter. Fitted with 2 fixed wheels and 2 castors with brakes. Robust and easy to operate. [See More]
- Type: Table
- Actuation: Foot
- Capacity: 772
from Southworth Products Corp.
This 2,000 pound capacity hydraulic lift table with 36 inches of vertical travel is built for years of trouble free service. Like all of our LS Hydraulic Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 2000
from Unidex, Inc.
The QL Series "Quick Lifter" from Unidex is a low-cost, high-performance mobile lift table ideal for a wide range of applications from automotive service to OEM production. Produced for "off-the-shelf" availability, it designed to provide dependable, trouble-free operation. [See More]
- Type: Table
- Lift Travel: 16
- Capacity: 500
- Width: 24
from Econo Lift Limited
Vertical travel. 28 ”. Safety. •Velocity fuse on each cylinder to eliminate collapsing due tohose failure. •Hold down tabs on all four corners. •Photo eye to interrupt lowering in the event of an obstruction (optional). Lowered height. Floor level. Beveled edge. on platform. [See More]
- Type: Table
- Lift Travel: 28
- Capacity: 1000
- Width: 44
from Raymond Handling Consultants, L.C.
POST LIFT TABLE [See More]
- Type: Table
- Capacity: 1000
from David Round
You can count on Ruger Industries to solve your most challenging Roll Handling problems. No matter what your Roll Handling application, lifting, turning or transporting rolls, coils or spools, Ruger has a Stainless Steel Roll Handling unit to satisfy even the most difficult requirements. [See More]
- Type: Table
- Tires: Solid
- Actuation: Hydraulic
from Titan Worldwide
Standard 1 HP power pack c/w hand control [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 500
- Width: 24
from Lift-Tables.net
Since 1944, Presto Lifts, Inc. has been creating precision hydraulic equipment that improves safety and productivity. In 1977, Presto Lifts began producing a full line of manually propelled lifts and stackers under the brand name of Presto. 1990 saw the introduction of the scissor lift table for... [See More]
- Type: Table
- Lift Travel: 30 to 60
- Capacity: 500 to 2000
- Width: 42
from Autoquip Corporation
Air Force Air Bag Lift and Tilt – Versatile & Durable Work Station Tilters for Work Positioning, Ergonomics, and Worker Productivity. Autoquip Air Force Lift and Tilts are driven by heavy industrial pneumatic air bag actuators, and because they're completely air powered, not susceptible to... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 3000
- Width: 48
from Positech Corporation
The Conco ® Clearance Master is a low-headroom manipulator designed and developed to perform in work areas with overhead limitations as low as 8 feet. It eliminates the need to reconstruct the work area to improve the ability to handle loads. Tight overhead restrictions that might prohibit the... [See More]
- Type: Manipulator; Table
- Lift Travel: 56
- Capacity: 300
- Mechanism: Articulated
from Superlift Material Handling Inc.
Capacities to 30,000 lbs. Platform sizes to 20 feet. Superior Construction and design. 1 year warranty [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 2000 to 30000
- Features: Rotating
from Lift Products, Inc.
With a lowered height of only 4.25", The Lift-N-Spin can be loaded with a manual or electric pallet truck. This is accomplished by the exclusive auto-transition plate which provides a smooth surface from the ramp onto the rotating top. Once the lift is raised 1/4" the plate automatically lowers to... [See More]
- Type: Table
from Southworth Products Corp.
This 2,000 pound capacity lift table with 36 inches of vertical travel features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 2000
from Econo Lift Limited
Capacity. 450-4,500 lbs. Platform Sizes. 32 ” wide x 48 ” long to 56 ” wide x 72 ” long. Base Size. 32 ” wide x 48 ” wide. Travel. 24 ”. Lowered Height. 9 ”. Safety. Restraining Chain. Maintenance Bar. Power Supply. Ai. Maintenance. Hinged table top... [See More]
- Type: Table
- Lift Travel: 15
- Capacity: 4500
- Width: 32
from Raymond Handling Consultants, L.C.
CUSTOMIZABLE LIFT TABLES [See More]
- Type: Table
from Titan Worldwide
Heavy duty airbag actuator [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2000
- Width: 36
from Lift-Tables.net
Vestil Manufacturing Corp. is an industry leader in the manufacturing and distributing of materials handling equipment, providing a complete product range at competitive pricing. Vestil stand behind their products with outstanding people and the ability and willingness to respond to various... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1000 to 2000
- Width: 16
from Autoquip Corporation
CMD Dock Lift – Simple Dock Lifting. Portable, low capacity CMD Dock Scissor Lifts feature an exceptionally low 5.375" profile. CMD models offer a 72-inch x 72-inch platform, 3,000 pound or 4,000 pound capacities, and 50 inches of vertical travel. With solid steel construction, 4-way tread... [See More]
- Type: Table
- Lift Travel: 50
- Capacity: 3000
- Width: 72
from Positech Corporation
The Conco ® EzLift lift assist is a cost-effective in-line lifting device. This lift assist has up to 750 pounds of lift capacity and excels in assembly line handling and reach-in applications, when combined with an overhead XY rail system or a Conco ® Articulated Jib Arm. Operating Air... [See More]
- Type: Manipulator; Table
- Mechanism: Telescoping
- Capacity: 78
- Actuation: Hand; Air
from Superlift Material Handling Inc.
Superlift Material Handling offers ergonomic material handling equipment including lift tables, lift carts, upenders, electric carts, stackers, pallet trucks, skid lifters, work positioners, and custom designed equipment. We have products to lift, tilt, rotate, upend, move, extend or lower your... [See More]
- Type: Table
from Lift Products, Inc.
The Guardian Series represents the ultimate in lift table safety with features that are optional or not available on other lift tables. Guardian Series Low Profile models have a lowered height of only 3.25". The low profile feature provides greater flexability for tall pallet applications and... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 2,000 pound capacity lift table with 48 inches of vertical travel is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising and lowering. Fully... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 2000
from Econo Lift Limited
Platform Sizes. 36 ” wide x 48 ” long to 72 ” wide x 96 ” long. base sizes. Standard 36 ”,48 ” wide x 48 ”,60 ”,72 ” long. Travel. 36 ”,42 ”,48 ” vertical travel. Lowered height. 12 ”. Safety. Velocity fuse is standard on... [See More]
- Type: Table
- Lift Travel: 36
- Capacity: 8000
- Width: 36
from Raymond Handling Consultants, L.C.
HI-RISE SCISSOR LIFTS [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 2500
from Lift-Tables.net
Vestil Manufacturing Corp. is an industry leader in the manufacturing and distributing of materials handling equipment, providing a complete product range at competitive pricing. Vestil stand behind their products with outstanding people and the ability and willingness to respond to various... [See More]
- Type: Table
- Lift Travel: 24 to 42
- Capacity: 1000 to 6000
- Width: 48
from Autoquip Corporation
Compact Scissor Lifts – Premium Quality Work Station Lifts. The original Compact scissors table family is Autoquip's premium series of work station hydraulic lifts. With five times the number of life cycles as competitive brands, these unique lifts have become the recognized standard for... [See More]
- Type: Table
- Lift Travel: 25
- Capacity: 500
- Width: 12 to 24
from Positech Corporation
Positech ’s pneumatic LodeArm ® (LA) lightweight industrial manipulator provides excellent maneuverability of payloads up to 640 pounds, increasing workers ’ capacity to perform physically stressful, repetitive lifting tasks. Easily adjustable to fit almost any work cell, the... [See More]
- Type: Manipulator; Table
- Lift Travel: 54
- Capacity: 225
- Mechanism: Articulated
from Superlift Material Handling Inc.
Firestone Airbags. Airbags have lifetime guarantee. Heavy Duty welded structure. Simple operation. Low maintenance [See More]
- Type: Table
- Width: 48
- Capacity: 2000 to 4000
- Length: 36 to 60
from Lift Products, Inc.
The Spring Level Loader is an economical solution for pallet building and work positioning for many applications. Requiring no power, the positioner comes with three springs for maximum load weight leveling. Easily remove one or two springs for lighter load requirements. As weight is added to the... [See More]
- Type: Table
from Southworth Products Corp.
This 2,000 pound capacity lift table with 48 inches of vertical travel features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 2000
from Econo Lift Limited
Capacity. 1,000/2,000/4,000/6,000 lbs. Platform Sizes. 32 ” wide x 48 ” long to 72 ” wide x 72 ” long. Base Sizes. Standard 32 ” and 48 ” wide x 48 ”. Long travel. 24 ”vertical travel. Lowered height. 9 ”. Safety. Flip over maintenance stop. [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1000
- Width: 48
from Raymond Handling Consultants, L.C.
MECHANICAL LIFT TABLE [See More]
- Type: Table
- Width: 24
- Capacity: 2000
- Length: 36
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 30
- Capacity: 500 to 1000
- Width: 24
from Autoquip Corporation
DP Scissor Lifts – Double Pantograph Scissors Lift Family, The Most Versatile and Popular of our High Travel High Capacity Scissors Tables. Two sets of vertically stacked scissors are pinned directly together, stabilized, and raised simultaneously by common hydraulic cylinders. This Double... [See More]
- Type: Table
- Lift Travel: 60
- Capacity: 3000
- Width: 48
from Positech Corporation
Positech ’s pneumatic LodeArm ® II is a lightweight manipulator arm that is designed to service multiple machining centers and applications where reach-in is necessary. With lift capacity up to 350 pounds, it is specifically designed to reduce the physical stress of manipulation which... [See More]
- Type: Manipulator; Table
- Lift Travel: 54
- Capacity: 225
- Mechanism: Articulated
from Superlift Material Handling Inc.
Heavy Duty all welded frames. DU bushings. Life time guarantee on Firestone Airbags. Cam Followers. Low maintenance. Easy operation [See More]
- Type: Table
- Actuation: Air
- Mechanism: Scissor
from Lift Products, Inc.
The Air Bag Level Loader is an economical solution for pallet building and work positioning for many applications. The positioner can be disconnected from shop air or a compressor once the airbag is inflated. As weight is added to the Air Bag Level Loader, it causes the air bag to compress, lowering... [See More]
- Type: Table
from Southworth Products Corp.
This 4,000 pound capacity hydraulic lift table is built for years of trouble free service. Like all of our LS Hydraulic Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising and lowering. Fully adjustable down... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 4000
from Econo Lift Limited
Platform Sizes. 24 ” wide x 36 ” long to 72 ” wide x 96 ” long. Base Sizes. Standard 24 ”,36 ”,48 ” wide x 36 ”,48 ”,60 ”,72 ” long. Travel. 24 ”,36 ”,42 ”,48 ” vertical travel. Lowered height. 7 ” &... [See More]
- Type: Dock (optional feature); Table
- Lift Travel: 24
- Capacity: 2000
- Width: 24
from Raymond Handling Consultants, L.C.
HYDRAULIC TRUCK DOCK SCISSOR LIFT [See More]
- Type: Dock; Table
- Mechanism: Scissor
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 60 to 144
- Capacity: 2000 to 6000
- Width: 72
from Autoquip Corporation
HBS Mechanical Scissors Lift – Horizontal Ball Screw Actuated Lift that Provides Low Capacity Programmable Actuation. Horizontal Ball Screw scissors lift tables reliably raise loads to any elevation with a high degree of repeatability. The horizontal ball screw is mounted to the center axle of... [See More]
- Type: Table
- Actuation: Hydraulic; Motor
- Mechanism: Scissor; Screw
from Positech Corporation
Positech ’s pneumatic ReactionArm ® (RA), a torque reaction arm, absorbs shock, torsional forces and impact force from power tools; therefore, reducing carpal tunnel injury and cumulative trauma disorders. This reaction arm moves up and down without pushing any buttons with very little... [See More]
- Type: Table
- Lift Travel: 13
- Capacity: 20
- Mechanism: Articulated
from Superlift Material Handling Inc.
Superlift Material Handling offers ergonomic material handling equipment including lift tables, lift carts, upenders, electric carts, stackers, pallet trucks, skid lifters, work positioners, and custom designed equipment. We have products to lift, tilt, rotate, upend, move, extend or lower your... [See More]
- Type: Platform; Table
from Lift Products, Inc.
The LPT-MGV is an electric hydraulic scissors lift self propelled by a powered pallet jack that has been modified to have its forks removed. The lift table is hinged to the pallet jack, allowing the power head section to float freely from the lift section. This creates a stable lifting platform by... [See More]
- Type: Table
from Southworth Products Corp.
This 4,000 pound capacity lift table features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 4000
from Econo Lift Limited
Capacity. 1,000/2,000/4,000/6,000 lbs. Tilt angle. 0-40 degrees (standard). Lowered height. 15 ”. Travel. 24 ”. Front retaining lip. 8 ” high (standard). Power supply air. Pedestal Mounted Hand Control (up/down valve). Covered Foot Control (optional). Options. Platforms: wider or... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1000
- Width: 36
from Raymond Handling Consultants, L.C.
JET ® HYDRAULIC SCISSOR LIFT TABLES [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 660
from Lift-Tables.net
Vestil Manufacturing Corp. is an industry leader in the manufacturing and distributing of materials handling equipment, providing a complete product range at competitive pricing. Vestil stand behind their products with outstanding people and the ability and willingness to respond to various... [See More]
- Type: Table
- Lift Travel: 60 to 72
- Capacity: 1000 to 5000
- Width: 48
from Autoquip Corporation
Heavy Industrial Coil Handling Cars – Powered Transport Cars, With or Without Scissors Lifts and Turntables, to Transfer & Position Rolls & Coils. Autoquip Coil Transfer Cars utilize powered traverse drives (with or without a hydraulic lift) to eliminate the need for overhead cranes or... [See More]
- Type: Table
- Actuation: Motor
- Mechanism: Scissor
- Features: Rotating
from Positech Corporation
For jobs that require the compliance and float of a pneumatic manipulator, this ergonomic lift assist provides the operator with the highest level of feel and position of the payload. The Positech Simple Air Manipulator ® (SAM), an industrial manipulator, uses pneumatic power to provide quick... [See More]
- Type: Manipulator; Table
- Lift Travel: 87
- Capacity: 370
- Mechanism: Articulated
from Superlift Material Handling Inc.
Superlift Material Handling offers ergonomic material handling equipment including lift tables, lift carts, upenders, electric carts, stackers, pallet trucks, skid lifters, work positioners, and custom designed equipment. We have products to lift, tilt, rotate, upend, move, extend or lower your... [See More]
- Type: Platform; Table
from Lift Products, Inc.
With the same key features of the standard Max-Lift Table, The Double High Max-Lift Table offers a solution to those material handling applications with high lift requirements. Additional applications are those in which the platform size must be smaller than what is offered on a single pair of... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 4,000 pound capacity hydraulic lift table with 36 inches of vertical travel is built for years of trouble free service. Like all of our LS Hydraulic Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 4000
from Econo Lift Limited
Safety. Velocity fuses on each cylinder to eliminate the table from collapsing due to hose failure. Tilt angle. 0-30/45 degrees. Lowered height. 12 ”. Travel. 24 ”, 36 ”, 42 ” front retaining lip. 8 ” high (standard). Power supplies. A/C 110/1/60 volt. (standard). Hand... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1000
- Width: 48
from Raymond Handling Consultants, L.C.
NESTABLE TILT TRUCKS [See More]
- Type: Table
from Lift-Tables.net
Innovations in Ergonomics" aptly describes Lift Products guiding philsophy. The development of material handling products with the emphasis on ergonomics enables Lift Products to actually contribute to a reduction of injuries in the workplace. Lift Products is proud to be able to offer products... [See More]
- Type: Table
- Lift Travel: 72 to 96
- Capacity: 2000 to 5000
- Width: 48
from Autoquip Corporation
CMD Dock Lift – Simple Dock Lifting. Portable, low capacity CMD Dock Scissor Lifts feature an exceptionally low 5.375" profile. CMD models offer a 72-inch x 72-inch platform, 3,000 pound or 4,000 pound capacities, and 50 inches of vertical travel. With solid steel construction, 4-way tread... [See More]
- Type: Dock; Table
- Lift Travel: 50
- Capacity: 3000
- Width: 72
from Positech Corporation
The design of Positech ’s hydraulic industrial manipulator, the Taurus Positioning Arm (TPA), emulates the movement of the human arm. This hydraulic manipulator allows for reaching in and under. It is able to maneuver over or around work cell obstructions. When the handling process requires... [See More]
- Type: Manipulator; Table; Positioning Arm
- Lift Travel: 55
- Capacity: 500
- Mechanism: Articulated
from Superlift Material Handling Inc.
Superlift Material Handling offers ergonomic material handling equipment including lift tables, lift carts, upenders, electric carts, stackers, pallet trucks, skid lifters, work positioners, and custom designed equipment. We have products to lift, tilt, rotate, upend, move, extend or lower your... [See More]
- Type: Table
- Mechanism: Scissor
from Lift Products, Inc.
In applications where loads are very long a double long scissor design is required. Extreme overhang on a single scissor table can damage the table and create an unsafe condition. Edge, side and maximum load capacities are increased by adding an additional set of scissor arms to support the... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 4,000 pound capacity lift table with 36 inches of vertical travel features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 4000
from Econo Lift Limited
Platform Sizes. 24 ” wide x 36 ” long. 24 ” wide x 48 ” long. Base sizes. 24 ” wide x 36 ” long. 24 ” wide x 48 ” long. Travel. 24 ” & 36 ”. Lowered height. 9 1/4 ”. Safety. Velocity fuse on all cylinders. Power supplies. Foot... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1000
- Width: 24
from Raymond Handling Consultants, L.C.
MINI-SCISSOR LIFT [See More]
- Type: Table
- Mechanism: Scissor
from Lift-Tables.net
Southworth Products Corp is the world's largest manufacturer of ergonomic material handling equipment and container handling equipment for vertical lifting and work positioning, designed to improve worker productivity while reducing the potential for workplace injuries. Southworth's lines of... [See More]
- Type: Table
- Lift Travel: 60 to 144
- Capacity: 2000 to 12000
- Width: 42
from Autoquip Corporation
PDQ Dock Lift – Simple Dock Lifting. Portable, medium capacity PDQ Dock Scissor Lifts feature an exceptionally low 4 ½" profile. PDQ models offer a 60-inch x 84-inch platform, capacities from 4,000 pounds to 6,000 pounds, and 55 ½ inches of vertical travel. Designed to handle... [See More]
- Type: Table
- Lift Travel: 56
- Capacity: 4000
- Width: 60
from Positech Corporation
Positech ’s low-profile Transfer Arm (ATA) allows placement in areas too confined to accommodate larger material handling equipment. Specifically designed for minimum vertical travel and to fit limited-access work cells, this machine is well-suited for loading and unloading machining centers... [See More]
- Type: Manipulator; Table
- Lift Travel: 24
- Capacity: 300
- Mechanism: Articulated
from Superlift Material Handling Inc.
Superlift stainless steel lift table can be used for applications that require sanitary washdown for constant cleanliness. Superlift Stainless steel lift tables are being used throughout the world in pharmaceutical, food processing, dairy, bakery plants, laboratories, animal pharma and cosmetic... [See More]
- Type: Table
- Width: 60 to 108
- Capacity: 1800 to 3800
- Length: 30 to 54
from Lift Products, Inc.
The term double wide is exactly that. It's two scissor assemblies welded into one frame. The purpose of this is to offer wider tops that are not available with a single scissors. A standard rule is that the table top cannot be 2 feet wider than the base frame. An example of this is that a 48" wide... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 4,000 pound capacity lift table with 48 inches of vertical travel is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising and lowering. Fully... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 4000
from Econo Lift Limited
Platform Sizes. 24 ” wide x 36 ” long. 24 ” wide x 48 ” long. Base Sizes. 24 ” wide x 36 ” long. 24 ” wide x 48 ” long. Travel. 24 ” & 36 ”. Lowered Height. 5 1/2 ”. Safety. Velocity fuse on all cylinders. Power Supplies. Foot... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1000
- Width: 24
from Raymond Handling Consultants, L.C.
SERIES 35 SCISSORS LIFT TABLE [See More]
- Type: Table
- Mechanism: Scissor
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 240 to 288
- Capacity: 3000 to 6000
- Width: 84
from Autoquip Corporation
PLD Dock Lift – Convenient Dock Lifting. Autoquip ’s PLD Dock Lift can be modified to include accessory options to meet the demands of your outdoor application. We have options to improve load transfer, weather protection, portability and security features. Autoquip has the largest... [See More]
- Type: Table
- Lift Travel: 56
- Capacity: 2000
- Width: 60
from Positech Corporation
Positech ’s pneumatic Vertical Lift Cylinder (VLC) is ideal for manipulating heavy parts, over-the-assembly line and can assist in handling reach-in operations and can be combined with an overhead rail system or a Positech Articulated Jib Boom. Exceptional off-center payload handling for... [See More]
- Type: Table
- Lift Travel: 48
- Capacity: 400
- Mechanism: Lift Cylinder
from Superlift Material Handling Inc.
Superlift stainless steel lift table can be used for applications that require sanitary washdown for constant cleanliness. Superlift Stainless steel lift tables are being used throughout the world in pharmaceutical, food processing, dairy, bakery plants, laboratories, animal pharma and cosmetic... [See More]
- Type: Table
- Width: 48
- Capacity: 2000 to 8000
- Length: 44 to 46
from Lift Products, Inc.
The best value in lift tables with unparalleled features! Reduces awkward bending and lifting since the work load is always at the correct level. The possibility of back injuries is also reduced and productivity is increased. The MAX-Lift is a superior scissors lift table currently offered in the... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 4,000 pound capacity lift table with 48 inches of vertical travel features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 4000
from Econo Lift Limited
Platform Sizes. 24 ” wide x 48 ” long to 72 ” wide x 72 ” long. Base sizes. 24 ” wide x 48 ” wide and x 48 ” wide x 48 ” wide. Travel. 29 ”. Lowered heights. 4 ” to 4.3 ”. Safety. Velocity fuses. Pressure compensated flow divider. [See More]
- Type: Table
- Lift Travel: 29
- Capacity: 500
- Width: 24
from Raymond Handling Consultants, L.C.
PNEUMATIC LIFT TABLES [See More]
- Type: Table
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 72 to 216
- Capacity: 3000 to 6000
- Width: 84
from Autoquip Corporation
PLTC Dock Lift – Convenient Dock Lifting. Designed primarily for pit mounting, Autoquip's PLTC Dock Lift family extends from grade level to tackle most dock lifting needs. PLTC models offer two platform sizes, capacities ranging from 5,000 pounds to 15,000 pounds, and over 60 inches of... [See More]
- Type: Table
- Lift Travel: 58
- Capacity: 12000
- Width: 72
from Positech Corporation
Positech ’s pneumatic manipulator arm, the World Manipulator ® (WM), is a low-headroom solution for manipulating payloads up to 1,000 pounds, providing rigid support and reach-in capability. This ergonomic lift assist can be used as an alternative to a sling and hoist or a forklift to... [See More]
- Type: Manipulator; Table
- Lift Travel: 55
- Capacity: 440
- Mechanism: Articulated
from Superlift Material Handling Inc.
Superlift stainless steel lift table can be used for applications that require sanitary washdown for constant cleanliness. Superlift Stainless steel lift tables are being used throughout the world in pharmaceutical, food processing, dairy, bakery plants, laboratories, animal pharma and cosmetic... [See More]
- Type: Table
- Width: 48
- Capacity: 2000 to 4000
- Length: 36 to 48
from Lift Products, Inc.
The Max-Lift-XL lift table doesn't have just a few more thousand pound capacity than the standard Max-Lift, it was completely reengineered from the ground up to create the most rugged lift possible for extra heavy duty industrial applications. The base frame and platform are taller as a result of... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 6,000 pound, high capacity hydraulic lift table is built for years of trouble free service. Like all of our LS Hydraulic Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising and lowering. Fully... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 6000
from Econo Lift Limited
Small compact designs. Quality pump and cylinders. Ideal for small parts, maintenance shop, transporting items and other applications. Platform Size. 20.5" wide x 39.8" long. Max. Table Height. 62". Safety. Brake on caster. Power Supplies. Foot Pump with hand release for lift. Options. Safety... [See More]
- Type: Table
- Lift Travel: 45
- Capacity: 660
- Width: 20
from Raymond Handling Consultants, L.C.
PORTABLE SCISSOR LIFT TABLES [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 1000
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 30 to 72
- Capacity: 50000 to 120000
- Width: 120
from Autoquip Corporation
Q Lift Scissor Lifts – Low Profile Double Pantograph Scissor Lift Tables, for Work Station Lifts and Personnel Work Platform Lifts. Low collapsed heights and small platform sizes of these extremely compact scissors tables make this family of Q-Lift Low Profile Double Pantograph perfect for... [See More]
- Type: Table
- Lift Travel: 54
- Capacity: 1500
- Width: 48
from Superlift Material Handling Inc.
Superlift stainless steel lift table can be used for applications that require sanitary washdown for constant cleanliness. Superlift Stainless steel lift tables are being used throughout the world in pharmaceutical, food processing, dairy, bakery plants, laboratories, animal pharma and cosmetic... [See More]
- Type: Table
- Width: 36 to 48
- Capacity: 500 to 4000
- Length: 24 to 36
from Lift Products, Inc.
The Max-M22/33 ergonomic scissor lift table incorporates all the popular features of the time-tested Max-Lift premium lift table into an economical quality lift table that competes handily with lower priced tables on the market. The Max-M22/33 has a 2,200 or 3,300 lb capacity with a 36" vertical... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 6,000 pound capacity lift table features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 6000
from Econo Lift Limited
Small compact designs. Quality pump and cylinders. Ideal for small parts, maintenance shop, transporting items and other applications. Platform Size. 17.7" wide x 28" long. 19.7" wide x 32.7" long. 20.5" wide x 39.8" long. Travel. 19.5" to 23". Max. Table Height. 30" / 36" / 37.5" / 39.4". Safety. [See More]
- Type: Table
- Lift Travel: 20
- Capacity: 330
- Width: 18
from Raymond Handling Consultants, L.C.
PORTABLE SCISSOR LIFT TABLES [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 1000
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 24 to 48
- Capacity: 4000 to 10000
- Width: 48
from Autoquip Corporation
Serapid Mechanical Scissors Lift – Utilizing Rigid Stacking Chain Actuator that Provides Repeatable, Programmable, and Clean Lifting. Serapid stacking chain scissors lifts offer exceptionally stable mechanical lifting by supporting the load from beneath with a column of heavy duty interlocked... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2000
- Width: 24 to 48
from Superlift Material Handling Inc.
Superlift stainless steel lift table can be used for applications that require sanitary washdown for constant cleanliness. Superlift Stainless steel lift tables are being used throughout the world in pharmaceutical, food processing, dairy, bakery plants, laboratories, animal pharma and cosmetic... [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 6000 to 20000
- Actuation: Hydraulic
from Lift Products, Inc.
The Maxx-Mobile Tilt & Lift provides all the features of a standard portable tilter and the added feature of providing lift. This model can tilt a load up to 90 °. The lift feature allows up to 11" of vertical travel. Since all users are not the same size and height and loads often vary,... [See More]
- Type: Table
from Southworth Products Corp.
This 6,000 pound capacity hydraulic lift table with 36 inches of vertical travel is built for years of trouble free service. Like all of our LS Hydraulic Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 6000
from Econo Lift Limited
Platform Sizes. 24 ” wide x 36 ” long to 60 ” wide x 96 ” long. Base sizes. Standard 24, 36 ” wide x 36 ”, 48 ”, 60 ”, 72 ” long. Travel. 24 ”, 36 ”, 42 ”, 48 ” vertical travel. Lowered height of liFt table. 12 ”. [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2000
- Width: 24
from Raymond Handling Consultants, L.C.
PRESTO PORTABLE ELECTRIC SCISSOR LIFTS [See More]
- Type: Table
- Mechanism: Scissor
from Lift-Tables.net
Innovations in Ergonomics" aptly describes Lift Products guiding philsophy. The development of material handling products with the emphasis on ergonomics enables Lift Products to actually contribute to a reduction of injuries in the workplace. Lift Products is proud to be able to offer products... [See More]
- Type: Table
- Lift Travel: 36 to 60
- Capacity: 2000 to 8000
- Width: 48
from Autoquip Corporation
Series 35 Double High Scissor Lift Tables – For Greater Vertical Travel While Minimizing Footprint and Platform Size. Series 35 Double High scissor lift tables are comprised of two individual scissors table assemblies stacked and welded together to provide higher vertical travel while... [See More]
- Type: Table
- Lift Travel: 48
- Capacity: 2000
- Width: 36
from Superlift Material Handling Inc.
12 ” high retaining back plate. Remote powerpack. Velocity fuses on all hydraulic cylinders. Over load protection. Reinforced platforms. 1 year warranty [See More]
- Type: Table
- Width: 48 to 60
- Capacity: 2000 to 6000
- Length: 36
from Lift Products, Inc.
Roto-Max was designed from the ground up with the operator in mind. The Roto-Max electric hydraulic work positioner places the load at the operator to determine where he or she would like the work load positioned. The Semi-Stainless Steel Edition of The Roto-Max features the following: Stainless... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 6,000 pound capacity lift table with 36 inches of vertical travel features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 6000
from Econo Lift Limited
Platform Sizes. 24 ” wide x 96 ” long to 48 ” wide x 240 ” long. Travel. 36 ”, 48 ”, 60 ”. Lowered height. 9 ” & 12 ”. Safety. Velocity fuse is standard on each cylinder. Safety maintenance stop included with each lift. Power supplies. A/C... [See More]
- Type: Table
- Lift Travel: 36
- Capacity: 1000
- Width: 24
from Raymond Handling Consultants, L.C.
REDILIFT SCISSOR LIFT [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 1000
from Lift-Tables.net
Southworth Products Corp is the world's largest manufacturer of ergonomic material handling equipment and container handling equipment for vertical lifting and work positioning, designed to improve worker productivity while reducing the potential for workplace injuries. Southworth's lines of... [See More]
- Type: Table
- Lift Travel: 36 to 60
- Capacity: 4000 to 12000
- Width: 84
from Autoquip Corporation
Series 35 Extra Narrow Scissor Lift Tables – When Width is a Constraint But Quality and Durability are Still Important!. Exceptionally narrow leg stance allows these lifts to perform applications in areas with floor space constraints or possible interference with surrounding equipment. Travel... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2500
- Width: 16 to 32
from Lift Products, Inc.
The advantage of the E-Lift is the center opening measures 28.9" which is ideal for a standard 27" wide pallet truck. The added center support of the E-Lift is designed to help prevent the pallet from deflecting downward in the center due to the wider center area. The center support is shorter than... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 6,000 pound capacity lift table with 48 inches of vertical travel is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low pressure hydraulics. Fast raising and lowering. Fully... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 6000
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 30 to 72
- Capacity: 25000 to 60000
- Width: 72
from Autoquip Corporation
Series 35 Extra Wide Double Long Scissor Lift Tables – For Longer and Wider Loads, Requiring Higher Side Load Capacities and Load Stability for Large, Bulky Loads. Series 35 Extra Wide Double Long scissor lift tables have two sets of wide-stance scissors mechanisms mounted end-to-end to... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 4000
- Width: 48 to 72
from Lift Products, Inc.
The Guardian Series represents the ultimate in lift table safety with features that are optional or not available on other lift tables. Guardian Series Low Profile models have a lowered height of only 3.25". The low profile feature provides greater flexability for tall pallet applications and... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
This 6,000 pound capacity lift table with 48 inches of vertical travel features a wider platform than our standard lifts. It is built for years of trouble free service. Like all of our LS Lifts it features an ergonomic comfort edge with high visibility safety yellow striping. It also features. Low... [See More]
- Type: Table
- Actuation: Hydraulic
- Capacity: 6000
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 24 to 48
- Capacity: 4000 to 12000
- Width: 72
from Autoquip Corporation
Series 35 Extra Wide Scissor Lift Tables – Greater Edge Load and Stability for Wider Loads!. The wide stance of the Series 35 Extra Wide scissor lift tables add stability and support when handling wide, bulky loads. With maximum single-scissors platform widths available up to 72 inches, this... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 2500
- Width: 48 to 72
from Lift Products, Inc.
Ideal for use in wash down areas, the SXT hydraulic lift table has a passivated sanitary finish and all dead end spaces have been eliminated. In addition to the many ergonomic benefits derived by using lift tables, the USDA Approved SXT also meets the complex requirements demanded by the food... [See More]
- Type: Table
from Southworth Products Corp.
Backsaver Lite Compact lifts feature a double scissor mechanism to provide a full 36" of lifting height in a very small 12" x 24" platform [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 500
from Lift-Tables.net
Innovations in Ergonomics" aptly describes Lift Products guiding philsophy. The development of material handling products with the emphasis on ergonomics enables Lift Products to actually contribute to a reduction of injuries in the workplace. Lift Products is proud to be able to offer products... [See More]
- Type: Table
- Lift Travel: 36 to 60
- Capacity: 2000 to 8000
- Width: 100
from Autoquip Corporation
Series 35 Low Profile Work Station Scissors Lifts – Providing Durability and Power in an Industry-Best 5" Lowered Height. Autoquip S35 Low Profile scissors tables are the most stable, durable, and compact scissors lift in the industry. They offer travel ranges from 24 to 48 inches, heft... [See More]
- Type: Table
- Lift Travel: 24
- Capacity: 1000
- Width: 16 to 24
from Lift Products, Inc.
Ideal for use in wash down areas, the SXTLP ground entry lift table has a passivated sanitary finish and all dead end spaces have been eliminated. In addition to the many ergonomic benefits derived by using lift tables, the USDA Approved SXTLP also meets the complex requirements demanded by the food... [See More]
- Type: Table
from Southworth Products Corp.
Backsaver Lite Compact lifts feature a double scissor mechanism to provide a full 36" of lifting height in a very small 12" x 24" footprint [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 500
from Lift-Tables.net
ECOA was founded in 1960 in Hialeah, Florida. For over 40 years, ECOA has been providing the best in hydraulic scissor lift and loading dock equipment for the material handling industry. ECOA Industrial Products, Inc. is now located in Medley, Florida, just 5 miles north of the Miami International... [See More]
- Type: Table
- Lift Travel: 30 to 72
- Capacity: 25000 to 60000
- Width: 120
from Autoquip Corporation
Series 35 Rover Mobile – DC Powered Mobile Scissor Lift Tables Allow the Flexibility of One Lift Serving Multiple Locations!. Completely self-contained and battery powered, these lifts are designed to be safe, reliable, cost-effective solutions for applications requiring one hydraulic scissors... [See More]
- Type: Table
- Lift Travel: 36
- Capacity: 2500
- Width: 24 to 48
from Lift Products, Inc.
The "U" shaped low profile table is ideal for handling wire baskets, containers, plastic and wooden open bottom pallets. This design allows loading with either a 21" wide manual or electric pallet truck without the need for a loading ramp. The Stainless Steel Galvanized Guardian U-Lift Tables have... [See More]
- Type: Table
- Mechanism: Scissor
from Southworth Products Corp.
Backsaver Lite Compact lifts feature a double scissor mechanism to provide a full 36" of lifting height in a very small 12" x 24" platform [See More]
- Type: Table
- Mechanism: Scissor
- Capacity: 1000