Fuse Power Distribution Units (PDU)
from Waytek, Inc.
The mVEC is a power distribution slave module that distributes power to other devices in a vehicle, and communicates over a CAN bus. Because it is a slave module, the mVEC relies on other CAN modules to control its relays and monitor component status messages.The mVEC is ideal for various... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 16
- Voltage: 12-24VDC
- Current: 200.0
from RS Components, Ltd.
IEC input and output rack PDU 6+1+1 [See More]
- Protection: Thermal Fuse
- Number of Outlets: 7
- Voltage: 230V; 250 V
- Current: 10.0
from Waytek, Inc.
The mVEC is a power distribution slave module that distributes power to other devices in a vehicle, and communicates over a CAN bus. Because it is a slave module, the mVEC relies on other CAN modules to control its relays and monitor component status messages. The mVEC is ideal for various... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 20
- Voltage: 12-24VDC
- Current: 200.0
from RS Components, Ltd.
DK Socket strip, IEC 320 socket C13, 9-w [See More]
- Protection: Thermal Fuse
- Current: 10.0
- Voltage: 230V; 250 V
- Outlets: IEC; IEC C13
from Waytek, Inc.
The mVEC is a power distribution slave module that distributes power to other devices in a vehicle, and communicates over a CAN bus. Because it is a slave module, the mVEC relies on other CAN modules to control its relays and monitor component status messages. The mVEC is ideal for various... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 24
- Voltage: 12-24VDC
- Current: 200.0
from RS Components, Ltd.
6 way Sq. distr unit w/inlet plug [See More]
- Protection: Thermal Fuse
- Number of Outlets: 6
- Voltage: 230V; 250 V ac
- Outlets: IEC; IEC C13
from Waytek, Inc.
The mVEC is a power distribution slave module that distributes power to other devices in a vehicle, and communicates over a CAN bus. Because it is a slave module, the mVEC relies on other CAN modules to control its relays and monitor component status messages. The mVEC is ideal for various... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 20
- Voltage: 12-24VDC
- Current: 200.0
from RS Components, Ltd.
6 way Sq. distr unit w/filtered plug [See More]
- Protection: EMI/RFI; Thermal Fuse
- Number of Outlets: 6
- Voltage: 230V; 250 V ac
- Outlets: IEC; IEC C13
from Waytek, Inc.
The mRFRM is an effective solution for power distribution systems that require the ability to monitor and control relays and fuses; and a great replacement for complex, fully electronic (solid state) power distribution modules. The mRFRM is a power distribution module that distributes power to other... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 42
- Voltage: 9-32VDC
- Current: 200.0
from RS Components, Ltd.
UK Steckdosenleiste 3fach 1,5m [See More]
- Protection: Thermal Fuse
- Number of Outlets: 3
- Voltage: 230V; 230 V
- Current: 13.0
from Waytek, Inc.
The mRFRM is an effective solution for power distribution systems that require the ability to monitor and control relays and fuses; and a great replacement for complex, fully electronic (solid state) power distribution modules. The mRFRM is a power distribution module that distributes power to other... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 42
- Voltage: 9-32VDC
- Current: 200.0
from RS Components, Ltd.
UK Steckdosenleiste 3fach 3m [See More]
- Protection: Thermal Fuse
- Number of Outlets: 3
- Voltage: 230V; 230 V
- Current: 13.0
from Waytek, Inc.
Eaton's Bussmann Series 15305-2-2-4 Mini Fuse Panel. Rear Terminal Mini Fuse Panel. Weathertight with enclosure with cover. 30A max. output per contact. 5 - 280 Bussed Micro Relays with 10 Bussed Fuses (not included). Nuts assembled. Tall Cover included. IP66 Rating [See More]
- Protection: Thermal Fuse
- Current: 30.0
- Number of Outlets: 15
-
Unit Type:
RTMRs
from RS Components, Ltd.
UK Steckdosenleiste 6fach 1,5m [See More]
- Protection: Thermal Fuse
- Number of Outlets: 6
- Voltage: 230V; 230 V
- Current: 13.0
from Waytek, Inc.
Eaton's Bussmann Series 37701-1NN0022 Power Fuse Module. Category: Power Distribution Modules. Manufacturer: Eaton. Series: 37700. Type: Power Relay Module (PRM)/Power Fuse Module (PFM). Number of Positions: 2 (*JCASE Fuses Sold Separately). PFM Rating: Each inline fuse rated up to 60A. Input... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 2
- Voltage: 12VDC
- Current: 70.0
from RS Components, Ltd.
UK Steckdosenleiste 6fach 3m [See More]
- Protection: Thermal Fuse
- Number of Outlets: 6
- Voltage: 230V; 230 V
- Current: 13.0
from Waytek, Inc.
Eaton's Bussmann Series 37702-1AN0022 Power Relay Module. Category: Power Distribution Modules. Manufacturer: Eaton. Series: 37700. Type: Power Relay Module (PRM)/Power Fuse Module (PFM). Color: Black. Number of Fuse Positions: 2 (*JCASE style fuses sold separately). PRM Rating: 70A. PFM Rating:... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 2
- Voltage: 12VDC
- Current: 70.0
from RS Components, Ltd.
UK Steckdosenleiste 7fach 1,5m [See More]
- Protection: Thermal Fuse
- Number of Outlets: 7
- Voltage: 230V; 230 V
- Current: 13.0
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Unit Type: Rack Style; Hardwired unit (Permanent)
- Phase: Single; Three
from Littelfuse, Inc.
Thanks to electronically isolated input and output connections, the HWA20 Series 32V Hard-Wired Waterproof ATO ® Fuse Box (PDM61001ZXM) allows you to achieve customized circuit protection with up to 10 ATO ® blade fuses (sold separately). The multi-fuse holder handles 40A continuous... [See More]
- Protection: Thermal Fuse
- Unit Type: Bolt Down
- Current: 210.0
- Physical: 1.9385 H x 1.5525 W x 6.37 L in. (161 mm)
from DuraComm Corporation
Fused Distribution Block. 5 Position Fused Distribution Block. DuraComm designed and built for up to 20 Amps per fuse / 75 per block [See More]
- Protection: Thermal Fuse
- Current: 75.0
- Voltage: 24VDC (optional feature); 48 VDC (optional feature); 5-100VDC
- Unit Type: Block/Board Unit
from Chief Enterprises LLC
BRIC, Fusion, Maxi Combo x 280 x Maxi Fuse [See More]
- Protection: Thermal Fuse
from Transtector Systems, Inc.
Rack mount power distribution unit (also known as PDU) 1101-1008 from Transtector is a DC 1RU PDU that accepts a ±24 to ±48 Vdc 2x DC feed electrical service and distributes power to individual loads via 4x outputs per feed. This rack mount unit equipped with state-of-the-art surge... [See More]
- Protection: Circuit Breaker; Thermal Fuse
- Current: 350.0
- Voltage: 24VDC; 48 VDC
- Unit Type: Rack Style
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Unit Type: Rack Style
- Phase: Single; Three
from Littelfuse, Inc.
Are you looking for a compact, easy-to-install waterproof fuse and relay box? The HWB60-AL Series Hard-Wired Waterproof Power Distribution Box with AssureLatch ™ (PDM71003ZXM) is a great choice for protecting accessory circuits and overflow circuits from a main power distribution module (PDM). [See More]
- Protection: Thermal Fuse
- Unit Type: Bolt Down
- Current: 250.0
- Physical: 3.1 H x 2.6 W x 6.25 L in. (113 mm)
from DuraComm Corporation
DB-5MG Midget Series Features: For DC power distribution from 5 ~ 100 VDC. Suitable for use with Solar Power applications. Includes dual (Neg/Pos) input terminals each end for parallel "add on" capability Up to 30 Amps per circuit / 75 Amps per block. Accommodates 13/32" x 1 1/2" "Midget" fuses (not... [See More]
- Protection: Thermal Fuse
- Current: 75.0
- Voltage: 24VDC (optional feature); 48 VDC (optional feature); 5-100VDC
- Unit Type: Block/Board Unit
from Transtector Systems, Inc.
Rack mount power distribution unit (also known as PDU) 1101-534 from Transtector is an AC 1RU PDU that accepts a 120 Vac 2x single-phase feed electrical service and distributes power to individual loads via 6x 15A NEMA 5-15 outlets. This rack mount unit equipped with state-of-the-art SASD surge... [See More]
- Protection: Thermal Fuse; Transient Voltage Surge Suppression
- Frequency: 50Hz; 60Hz
- Voltage: 120 Vac
- Phase: Single
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Unit Type: Rack Style; Hardwired unit (Permanent)
- Phase: Single; Three
from Littelfuse, Inc.
Are you looking for a compact, easy-to-install waterproof fuse and relay box? The HWB60-AL Series Hard-Wired Waterproof Power Distribution Box with AssureLatch ™ (PDM71004ZXM) is a great choice for protecting accessory circuits and overflow circuits from a main power distribution module (PDM). [See More]
- Protection: Thermal Fuse
- Unit Type: Bolt Down
- Current: 250.0
- Physical: 113 mm
from DuraComm Corporation
DBRM Series Features: 20 Amps maximum per position. 75 Amps maximum per panel. Utilizes standard ATC/ATO automotive fuses (NOT supplied). Choice of 5, 10, 15 and 20 positions for 12, 24 and 48 Volt systems [See More]
- Protection: Thermal Fuse
- Current: 75.0
- Voltage: 24VDC (optional feature); 48 VDC (optional feature); 12VDC
- Unit Type: Cabinet; Wall Mount (No Cabling); Panel Mount
from Transtector Systems, Inc.
Rack mount power distribution unit (also known as PDU) 1101-942 from Transtector is an AC 1RU PDU that accepts a 120 Vac single-phase electrical service and distributes power to individual loads via 4x NEMA 5-20 outlets per feed. This rack mount unit equipped with state-of-the-art SASD surge... [See More]
- Protection: Thermal Fuse; Transient Voltage Surge Suppression
- Frequency: 50Hz; 60Hz
- Voltage: 120 Vac
- Phase: Single
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Unit Type: Hardwired unit (Permanent)
- Phase: Single; Three
from Littelfuse, Inc.
The HPDM Series 70 V Max 600 A 2-Pole MEGA ® Fuse Power Distribution Module (880195400) is a heavy-duty fuse box designed for OEM and aftermarket applications in the commercial vehicle industry.When connected to a vehicle's electrical system, it provides two high-current MEGA ®... [See More]
- Protection: Thermal Fuse
- Physical: 5.0635 H x 1.732 W x 4.898 L in. (129 mm)
- Unit Type: Bolt Down
- Operating Temperature: -58 to 221
from DuraComm Corporation
DP-10 LED Series Features: Front panel LEDs indicate circuit (open/closed) position. Access power from 10 outputs, 20 Amps maximum per output. 75 Amps maximum per panel. Uses standard ATC/ATO blade fuses (NOT supplied). For use with 12, 24 or 48 Volt systems*. *Caution: please ensure proper fuse... [See More]
- Protection: Thermal Fuse
- Number of Outlets: 10
- Voltage: 24VDC (optional feature); 48 VDC (optional feature); 12VDC
- Current: 75.0
from Transtector Systems, Inc.
Rack mount power distribution unit (also known as PDU) 1101-560 from Transtector is an AC 1RU PDU that accepts a 120 Vac 2x single-phase feed electrical service and distributes power to individual loads via 4x NEMA 5-20 outlets per feed. This rack mount unit equipped with state-of-the-art SASD surge... [See More]
- Protection: Thermal Fuse; Transient Voltage Surge Suppression
- Frequency: 50Hz; 60Hz
- Voltage: 120 Vac
- Phase: Single
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Phase: Single; Three
from DuraComm Corporation
DPM-8-100 Features: Voltage AND Amperage meters for effective system monitoring. 100 Amps maximum. Access power from 8 outputs, 30 Amps maximum per output. Requires automotive ATC/ATO blade fuses, (NOT supplied). 2 RU (rack units) in vertical height (3.5") for 12 Volt and 24 Volt systems [See More]
- Protection: Thermal Fuse
- Number of Outlets: 8
- Voltage: 24VDC (optional feature); 12VDC
- Current: 30.0
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Unit Type: Hardwired unit (Permanent)
- Phase: Single; Three
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Unit Type: Hardwired unit (Permanent)
- Phase: Single; Three
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Unit Type: Hardwired unit (Permanent)
- Phase: Single; Three
from TelephoneStuff.com
Leviton's Metered Power Distribution Units provide the reliable power distribution required for high-demand applications. Local LED display provides input current monitoring, giving on-site users the ability to monitor aggregate current draw as equipment is connected to each unit, preventing... [See More]
- Protection: Thermal Fuse
- Phase: Single; Three