Cabinet / Cabinet Mount Power Distribution Units (PDU)
from Jasper Electronics, Inc.
FEATURES: PDA2-LS is Caltrans Approved and TEES Compliant. For use in Caltrans TEES 336LS and 346LX cabinets. 1U smaller than the PDA2-LX and PDA3-LX. Custom user accessible slots: 1x for 206LS and 2x for Model 204 Flasher units. High Efficiency / High Reliability. For use in existing and new... [See More]
- Unit Type: Cabinet
- Certifications: CalTrans
- Physical: 11.51 x 5.25 x 17.00"
from LayerZero Power Systems, Inc.
The Series 70 ePODs: Dual Type-P provides switching between two independent power sources on the primary side of the transformer, while providing power distribution capabilities, featuring a solid-state transfer switch on the primary side of the transformer with a dual power distribution section,... [See More]
- Unit Type: Cabinet
- Phase: Three
- Voltage: 480 or 600V
- Number of Outlets: 24
from Gentherm Global Power Technologies
AC power distribution panels are also available using NEMA, IP, and standard location enclosures. General equipment available includes voltage & current metering, isolation load breakers, load shedding, digital and analog monitoring, & SCADA contacts. [See More]
- Unit Type: Cabinet
from Legrand
Power Commander ® Power Distribution Units from Wiremold/Legrand offer comprehensive power distribution solutions for IT environments from networking solutions to high density servers. Power Commander ® IQ Power Distribution Units offer remote current and temperature monitoring of connected... [See More]
- Unit Type: Cabinet
- Number of Outlets: 24
- Voltage: 115V (optional feature); 208V (optional feature)
- Current: 40.0
from DuraComm Corporation
DBRM Series Features: 20 Amps maximum per position. 75 Amps maximum per panel. Utilizes standard ATC/ATO automotive fuses (NOT supplied). Choice of 5, 10, 15 and 20 positions for 12, 24 and 48 Volt systems [See More]
- Unit Type: Cabinet; Wall Mount (No Cabling); Panel Mount
- Current: 75.0
- Voltage: 24VDC (optional feature); 48 VDC (optional feature); 12VDC
- Physical: 3.5” H x 19” W x 1.5” D
from Eaton | Power Quality
Eaton Static Transfer Switch (STS). Eaton Static Transfer Switches are designed to enhance our line of advanced backup power management solutions, adding an increased level of power quality, flexibility, availability and reliability to create the best ups power protection infrastructure. Eaton Type... [See More]
- Unit Type: Cabinet
- Features: Remote
from Schneider Electric
Racks and Accessories. Reliable rack power distribution. Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Switched Rack Power Distribution Units (PDUs)... [See More]
- Unit Type: Cabinet; Rack Style
from LayerZero Power Systems, Inc.
The Series 70 ePODs Type-N design provides switching between two independent power sources, while providing power distribution capabilities at the same switching voltage. Type-N ePODs provide the ability to transfer power between two or three sources in a quarter of an electrical cycle, while... [See More]
- Unit Type: Cabinet
- Phase: Three
- Voltage: 115V (optional feature); 208V (optional feature); 480 or 600V
- Number of Outlets: 12
from Gentherm Global Power Technologies
Power distribution panels are available using NEMA, IP, & hazardous location enclosures. General equipment available includes voltage & current metering, isolation load breakers, battery LVD, load shedding, DC/DC conversion, digital and analog monitoring & SCADA contacts. [See More]
- Unit Type: Cabinet
from Legrand
Power Commander ® Power Distribution Units from Wiremold/Legrand offer comprehensive power distribution solutions for IT environments from networking solutions to high density servers. Power Commander ® IQ Power Distribution Units offer remote current and temperature monitoring of connected... [See More]
- Unit Type: Cabinet
- Outlets: NEMA
- Number of Outlets: 15
- Certifications: TUV
from DuraComm Corporation
DP-10 LED Series Features: Front panel LEDs indicate circuit (open/closed) position. Access power from 10 outputs, 20 Amps maximum per output. 75 Amps maximum per panel. Uses standard ATC/ATO blade fuses (NOT supplied). For use with 12, 24 or 48 Volt systems*. *Caution: please ensure proper fuse... [See More]
- Unit Type: Cabinet; Wall Mount (No Cabling); Panel Mount
- Number of Outlets: 10
- Voltage: 24VDC (optional feature); 48 VDC (optional feature); 12VDC
- Current: 75.0