Bar Stock Copper, Brass, and Bronze Alloys
from Isabellenhutte USA
Our resistance alloys are used in many areas of electronics and electrical engineering and can be supplied in many different forms and types. Our alloys MANGANIN ®, ZERANIN ®, ISAOHM ® and NOVENTIN ® are homogenous solid-solution alloys that are annealed and stabilized in the primary... [See More]
- Shape / Form: Bar Stock; Wire; Profile or Structural Shape; Round Bar or Rod Stock
- Applications: Automotive or Vehicular; Resistance Alloy / Heating; Wear resistant parts or tooling
- Type: Brass, Bronze or Copper Alloy
from RS Components, Ltd.
Phosphor bronze rod,13in L 5/8in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 0.6250
- UTS: 60915
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Shape / Form: Bar Stock; Semi-finished, Mill Stock or Near Net Shapes
- Length: 2
- Width / OD: 0.2500
- Applications: Wear resistant parts or tooling
from RS Components, Ltd.
Phosphor bronze rod,13in L 3/4in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 0.7500
- UTS: 60915
from Stock Drive Products & Sterling Instrument - SDP/SI
A bearing is a device that reduces friction between moving components by preventing metal-to-metal contact while assisting components (shafts, axles, and wheels) to freely rotate around a fixed axis, cutting down on heat generation and the amount of energy that is consumed. By replacing sliding... [See More]
- Shape / Form: Bar Stock; Hollow Stock (Tube, Pipe, Column); Semi-finished, Mill Stock or Near Net Shapes
- Length: 6.5
- Width / OD: 1
- I.D.: 0.5000
from RS Components, Ltd.
Phosphor bronze rod,13in L 7/8in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 0.8750
- UTS: 60915
from RS Components, Ltd.
Phosphor bronze rod,13in L 1 1/4in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 1.25
- UTS: 60915
from RS Components, Ltd.
Phosphor bronze rod,13in L 1 1/2in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 1.5
- UTS: 60915
from RS Components, Ltd.
Leaded gunmetal rod,13in L 7/8in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 0.8750
- UTS: 34954
from RS Components, Ltd.
Leaded gunmetal rod,13in L 1in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 1
- UTS: 34954
from RS Components, Ltd.
Leaded gunmetal rod,13in L 1 1/4in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 1.25
- UTS: 34954
from RS Components, Ltd.
Leaded gunmetal rod,13in L 1 1/2in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 1.5
- UTS: 34954
from RS Components, Ltd.
Phosphor bronze rod,13in L 2 1/2in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 13
- Width / OD: 2.5
- UTS: 60915
from RS Components, Ltd.
VIKING BARRES CUIVRE SECT 15X4 [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Length: 38.98
- Width / OD: 0.1575
from RS Components, Ltd.
HDHC copper rod stock,24in L 1/4in dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 24
- Width / OD: 0.2500
- UTS: 34809
from RS Components, Ltd.
Brass bar stock,24in L 1x1/8in [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 1
- Specifications: CZ121/CW614N
- Length: 24
from RS Components, Ltd.
Brass rod stock,500mm L 5mm dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.1969
- Specifications: CZ121/CW614N
- Length: 19.69
from RS Components, Ltd.
Brass rod stock,500mm L 6mm dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.2362
- Specifications: CZ121/CW614N
- Length: 19.69
from RS Components, Ltd.
Brass rod stock,500mm L 12mm dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.4724
- Specifications: CZ121/CW614N
- Length: 19.69
from RS Components, Ltd.
Brass rod stock,500mm L 15mm dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.5906
- Specifications: CZ121/CW614N
- Length: 19.69
from RS Components, Ltd.
Brass rod stock,500mm L 18mm dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.7087
- Specifications: CZ121/CW614N
- Length: 19.69
from RS Components, Ltd.
Brass rod stock,500mm L 21mm dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.8268
- Specifications: CZ121/CW614N
- Length: 19.69
from RS Components, Ltd.
Brass rod stock,500mm L 24mm dia [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Width / OD: 0.9449
- Specifications: CZ121/CW614N
- Length: 19.69
from RS Components, Ltd.
Brass bar stock,500mm L 25.4 x 6.35mm [See More]
- Shape / Form: Bar Stock; Flats / Rectangular Bar
- Width / OD: 1
- Specifications: CZ121/CW614N
- Length: 19.69
from RS Components, Ltd.
Brass bar stock,500mm L 12.7 x 12.7mm [See More]
- Shape / Form: Bar Stock; Squares
- Width / OD: 0.5000
- Specifications: CZ121/CW614N
- Length: 19.69
from Bunting Bearings, LLC
B04 is a “GREEN ” non-leaded alloy. Copper-Bismuth Bronze C89835 Federalloy III (932 Version). Bunting continuous cast bronze bars of B04 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool... [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Applications: Bearings or Bearing Quality
- Width / OD: 1 to 10
from Concast Metal Products Co.
Aluminum bronze is the highest strength standard copper based alloy. Concast produces C95400, C95500 and C95900 in standard sizes of rounds, tubes and rectangles. Aluminum in conjunction with iron and nickel in C95500 acts as a strengthener in these alloys. All of the aluminum bronzes can be heat... [See More]
- Shape / Form: Bar Stock; Billet / Bloom; Squares; Hex; Hollow Stock (Tube, Pipe, Column) (optional feature); Plate; Flats / Rectangular Bar; Profile or Structural Shape; Semi-finished, Mill Stock or Near Net Shapes
- CDA Grade: 95200
- Type: Brass, Bronze or Copper Alloy
- Specifications: ICI, ASTM, or Other Casting Grade; ASTM / ASME; CDA; MIL-SPEC / QQS; SAE
from G.L. Huyett
We offer a complete inventory of sleeves, flanges, thrust washers, cored stock and plates. [See More]
- Shape / Form: Bar Stock; Squares; Round Bar or Rod Stock
- Secondary Width: 0.2500 to 9
- Tempers & Finishes: Sintered
- Thickness: 0.1250 to 1
from Reid Supply
CA360 Rods: This cold finished, nonferrous alloy 360 is a versatile, free cutting, 1/2 hard brass and is the standard of machinability (rated 100%) against which all nonferrous alloys are rated. It's an ideal metal for shop use where milling, drilling, tapping, knurling or turning is required. Brass... [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Specifications: ASTM / ASME
- Type: Brass
- Width / OD: 0.5000
from National Bronze & Metals Inc.
C11000 Electrolytic Tough Pitch Copper CDA 110 ETP, ASTM B124, ASTM B152, ASTM B187, ASTM B188, ASTM B272. High electrical and thermal conductivity, good corrosion resistance and solderability. C11000 is used for welding fixtures, anodes, bus bar in electrical power installations, ground straps,... [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- UNS C: 11000
- Type: Pure Copper or Very Low Alloy
- CDA Grade: 110
from Quality Bearings & Components
Sintered Bronze. SOLID BAR STOCK – INCH. • Oil-Impregnated Bronze SAE 841. • Self-Lubricating. NOTE: All bars are supplied with oversized so they can be machine finished to dimensions shown. [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock
- Length: 2
- Width / OD: 0.2500
from Corey Steel Company
Corey Steel Company has been distributing copper and copper alloy products since the company's inception. Various grades of brass, bronze, high leaded brass, and leaded nickel silver can be found in our inventory. As one of the leading long products suppliers to the screw machine industry our copper... [See More]
- Shape / Form: Bar Stock; Squares; Hex; Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Specifications: CDA
- CDA Grade: 36000
- Thickness: 0.0938 to 4
from Bunting Bearings, LLC
High-Leaded Tin Bronze. CDA 932. SAE 660. 83-7-7-3. ASTM B505. Bunting continuous cast bronze bars of C93200 give superior quality and performance. Continuous casting achieves a high density grain structure, free of porosity, resulting in a reduction of tool wear and component rejects. Solid and... [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 0.3750 to 4
- Specifications: SAE
- Applications: Bearings or Bearing Quality
from Reid Supply
Bronze is an alloy that consists primarily of copper with the addition of other ingredients. In most cases the ingredient added is typically tin, but arsenic, phosphorus, aluminum, manganese, and silicon is also be used to produce different properties in the material. All of these ingredients... [See More]
- Shape / Form: Bar Stock; Hollow Stock (Tube, Pipe, Column); Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 1
- Type: Bronze
- Length: 6.5
from Bunting Bearings, LLC
Powdered Metal Cored Bronze Bars. Many sizes available. [See More]
- Shape / Form: Bar Stock; Hollow Stock (Tube, Pipe, Column); Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 1 to 8
- Specifications: SAE
- Length: 5 to 6.5
from Bunting Bearings, LLC
Powdered Metal Solid Bronze Bars. Many sizes available. [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 0.2500 to 8
- Specifications: SAE
- Length: 2 to 6.5
from Bunting Bearings, LLC
Powdered Metal Iron Copper Bar. Many sizes available. [See More]
- Shape / Form: Bar Stock; Hollow Stock (Tube, Pipe, Column); Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 1 to 4.88
- Specifications: SAE
- Length: 5
from Bunting Bearings, LLC
Powdered Metal SAE 863 Iron Copper Solid Bar. Many sizes available. [See More]
- Shape / Form: Bar Stock; Round Bar or Rod Stock; Semi-finished, Mill Stock or Near Net Shapes
- Width / OD: 0.3750 to 2.88
- Specifications: SAE
- Length: 2.5 to 6.5